PIC24FJ64GU203-E/M5 - 32MHz 16-Bit MCU | Microchip
MPN: PIC24FJ64GU203-E/M5 ✓ Hoạt độngPIC24FJ64GU203-E/M5 Tóm tắt
A microcontroller is a programmable semiconductor that integrates a processor core, memory, communication peripherals, timers, and I/O into one compact device. The PIC24FJ64GU203 belongs to Microchip's PIC24FJ family of eXtreme Low-Power devices. Its architecture supports compact control, data acquisition, communications, and USB applications without requiring separate peripheral devices for common serial interfaces.
Key device features include 64 KB of ECC Flash for firmware storage, 8 KB of data RAM, and 26 I/O pins. Full Speed USB 2.0 operation supports Host, Device, and OTG roles. The family also provides core-independent peripherals and low sleep current, with the manufacturer describing sleep consumption as down to a few hundreds of nA while retaining context. These characteristics support systems where USB connectivity and low standby power are both important.
The PIC24FJ64GU203-E/M5 combines a 16-bit PIC24 CPU with an operating frequency up to 32 MHz and an instruction throughput of 16 MIPS. ECC Flash helps detect and manage errors in stored program data, while the two I2C and two SPI channels allow simultaneous connections to sensors, memory, displays, and other serial peripherals. Two UART channels provide additional asynchronous communication paths for external radios or industrial equipment.
Typical applications include USB-connected data loggers, portable instruments, compact control panels, sensor-hub boards, and industrial diagnostic equipment. Its 5 mm by 5 mm UQFN package supports space-constrained designs, while the automotive E temperature grade identifies the target qualification range. The exposed-pad package also requires careful PCB thermal design and assembly-process control.
When laying out the board, follow the manufacturer's 36-UQFN land pattern and preserve the exposed-pad connection specified by the package drawing. Place decoupling capacitors close to the supply pins, route USB D-plus and D-minus as a controlled impedance differential pair, and keep high-current or high-switching nodes away from sensitive analog inputs. Validate programming, clock, and peripheral behavior on the assembled design before production.
This page consolidates the PIC24FJ64GU203-E/M5 device specifications, interface capabilities, application guidance, and available replacement information into an engineering-focused selection resource. It also distinguishes the automotive-grade E/M5 ordering option from the industrial-grade I/M5 variant to help designers assess substitution risk before changing an approved BOM.
Bộ thay thế dễ dàng lắp đặt cho PIC24FJ64GU203-E/M5 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PIC24FJ64GU203-E/M5 (cùng hình factor và footprint) — khác nhau ở Package, USB Interface.
PIC24FJ64GU203-I/M5
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PIC24FJ64GU203-E/M5 Tỷ lệ tối đa & tính chất điện
| Microcontroller Type | 16-bit PIC24 RISC microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Instruction Throughput | 16 MIPS |
| Program Flash Memory | 64 KB ECC Flash |
| Data RAM | 8 KB |
| I/O Pin Count | 26 I/O |
| Supply Voltage Range | 2 V to 3.6 V |
| USB Interface | Full Speed USB 2.0 Host, Device, and OTG |
| I2C Interface Count | 2 channels |
| SPI Interface Count | 2 channels |
| UART Interface Count | 2 channels |
| Sleep Current | Down to a few hundreds of nA |
| Temperature Grade | Automotive E-grade |
| Hộp | 36-lead UQFN, 5 mm x 5 mm |
| Package Code | HVQCCN |
| Package Shape | Square no-lead |
| Terminal Count | 36 terminals |
Hướng dẫn cấu hình chân PIC24FJ64GU203-E/M5 square no-lead
Cấu hình chân cho PIC24FJ64GU203-E/M5 (square no-lead gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho PIC24FJ64GU203-E/M5.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PIC24FJ64GU203-E/M5 phù hợp cho 6 Áp dụngs: USB Data Loggers, Portable Measurement Instruments, Industrial Sensor Hubs, Compact Control Panels, USB OTG Field Equipment, Automotive Diagnostic Accessories.
USB Data Loggers
The PIC24FJ64GU203-E/M5 fits USB data loggers because its Full Speed USB 2.0 Device support operates alongside a 32 MHz PIC24 core and 64 KB ECC Flash. Two I2C and two SPI channels can connect temperature sensors, memory, and external converters, while two UART channels support radio or instrument links. The 8 KB RAM supports working buffers, and the 36-UQFN package preserves a compact footprint. Firmware should use the manufacturer USB stack and validate enumeration, suspend, and bus-power behavior across the required operating environment.
Được đề xuất
Portable Measurement Instruments
PIC24FJ64GU203-E/M5 is appropriate for portable measurement instruments that combine low-power standby operation with multiple serial interfaces. The 32 MHz core supports responsive control and data processing, while 8 KB RAM and 64 KB ECC Flash cover embedded acquisition and logging workloads. Two I2C channels can serve sensors, two SPI channels can connect displays or ADC components, and the UART channels provide expansion for external modules. Sleep current down to a few hundreds of nA helps conserve battery capacity, although system leakage and sensor duty cycle determine total runtime.
Được đề xuất
Industrial Sensor Hubs
The PIC24FJ64GU203-E/M5 supports industrial sensor-hub designs that need to aggregate several low-speed sensors and expose data through USB. Its two I2C and two SPI channels allow parallel connection of digital sensors, transceivers, and memory devices, while two UARTs support downstream controllers. The automotive E-grade ordering option is useful when the enclosure experiences extended-temperature environments, but the required qualification and maximum operating temperature must be confirmed against the system specification. ECC Flash also improves control over errors in stored firmware.
Được đề xuất
Compact Control Panels
A compact user control panel can use the PIC24FJ64GU203-E/M5 to manage display inputs, indicators, communications, and USB host or device connections. The 26 I/O pins provide dedicated digital interfaces, while the 32 MHz processor supports responsive menu and signal-processing tasks. Two UARTs are useful for auxiliary controllers, and the dual I2C and SPI channels can connect touch controllers, displays, or expansion boards. The 5 mm by 5 mm UQFN package reduces board area, although its exposed pad requires uninterrupted copper and controlled assembly reflow conditions.
Được đề xuất
USB OTG Field Equipment
PIC24FJ64GU203-E/M5 is well suited to field equipment that may operate as a USB host, USB device, or OTG endpoint. Full Speed USB 2.0 support permits direct connection to a host computer, removable storage, or another portable device without an external interface controller. The 32 MHz PIC24 core, 64 KB ECC Flash, and 8 KB RAM provide a compact control platform. Designers should account for the additional power and signal-management requirements of OTG roles, including correct pull-up or pull-down implementation and role-swap handling.
Được đề xuất
Automotive Diagnostic Accessories
The automotive E-grade PIC24FJ64GU203-E/M5 can support compact diagnostic and service accessories that require USB connectivity and low-power operation. Two UART channels can interface with vehicle or test equipment, while I2C and SPI support sensors and external transceivers. The 32 MHz processing rate supports protocol handling and control tasks, and the 64 KB ECC Flash is suitable for embedded application firmware. The E-grade designation makes the ordering option relevant to automotive-temperature designs, but AEC-Q100 status, temperature limits, and all functional-safety requirements must be verified separately before deployment.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PIC24FJ64GU203-E/M5 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PIC24FJ64GU203-I/M5 |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 36-UQFN (5x5) | 36-UQFN (5x5) |
| CPU Architecture | 16-bit PIC24 RISC | 16-bit PIC RISC |
| Maximum Frequency | 32 MHz | 32 MHz |
| Instruction Throughput | 16 MIPS | 16 MIPS |
| Program Memory | 64 KB ECC Flash | 64 KB Flash |
| Data Memory | 8 KB RAM | 8 KB RAM |
| Temperature Grade | Automotive E-grade | Industrial I-grade |
| USB Support | Full Speed USB 2.0 Host, Device, and OTG | USB |
| Low-Power Feature | XLP | XLP |
| Terminal Count | 36 terminals | 36 terminals |
Bảo phân biệt quan trọng
- Automotive E temperature-grade ordering option (vsPIC24FJ64GU203-I/M5)
- Full USB role support for compact embedded designs (vsPIC24FJ64GU203-I/M5)
- ECC program memory in a compact 36-UQFN device (vsPIC24FJ64GU203-I/M5)
Ghi chú thiết kế
Use the Microchip recommended land pattern for the 36-UQFN 5 mm by 5 mm package rather than a generic 36-pin QFN footprint. Preserve the exposed-pad connection with a solder mask opening and thermal-via pattern that match the package drawing. Confirm paste volume and reflow profile against assembly requirements, because the compact terminal pitch and exposed pad can otherwise produce solder-bridging or voiding defects.
Route the USB D-plus and D-minus pair as a short, continuous differential pair with the geometry specified by Microchip. Keep the pair away from clocks, switching regulators, high-current loads, and long parallel traces. Provide the required USB connection and filtering components close to the controller pins. Differential impedance and USB signal quality should be verified on prototypes because the same 2 V to 3.6 V device also supports low-power and sensor-oriented functions.
Place the required bypass and decoupling capacitors at the device supply pins using the shortest possible current-loop paths. Separate the noisy return current from sensitive analog and communications returns, and keep the exposed-pad connection electrically continuous to ground. If the design uses USB bus power, account for the additional transient and supply-current requirements of USB alongside the PIC24FJ64GU203-E/M5's active and sleep consumption.
Do not treat the E-grade and I-grade ordering codes as unconditional equivalents. PIC24FJ64GU203-E/M5 targets an automotive temperature grade, while PIC24FJ64GU203-I/M5 targets an industrial grade. Before substitution, compare the family datasheet, operating-temperature limits, qualification requirements, USB behavior, clock configuration, pin multiplexing, and application firmware. Also verify the exposed-pad footprint during the PCB review.
Thông tin tuân thủ
The automotive E-grade suffix is identified for PIC24FJ64GU203-E/M5, but a specific AEC-Q100 qualification statement and separate RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established.