Renesas Electronics

R5F10FMEDFB#X0 - 32MHz 64KB Flash MCU | Renesas Electronics

MPN: R5F10FMEDFB#X0 ✗ Akhir Hayat
80-pin LFQFP Package 32 MHz Speed 64 KB Memory
MOQ: 1 |

R5F10FMEDFB#X0 Ringkasan

Renesas Electronics R5F10FMEDFB#X0 is a 16-bit RL78/G1E microcontroller operating at up to 32 MHz, with 64 KB of programmable flash memory, in an 80-pin LFQFP package measuring 12 mm by 12 mm. The device combines an RL78 core, embedded flash, and embedded peripheral functions in a compact surface-mount package intended for embedded control applications. Its 80-pin LFQFP construction provides more external I/O than smaller microcontroller packages while preserving a familiar quad-flat-package assembly format.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals such as timers, serial interfaces, and analog-to-digital converters. Within the embedded-control hierarchy, the R5F10FMEDFB#X0 belongs to the Renesas RL78 family and is designed to execute firmware that reads sensors, controls actuators, manages communications, and supervises industrial or consumer equipment. The RL78 architecture is associated with energy-efficient embedded processing, making it suitable for compact systems where responsive control and low system overhead are important.

The verified product classification identifies this device as an RL78/G1E microcontroller with a 16-bit architecture, 32 MHz operating frequency, and 64 KB organized as 64K by 8 bits of flash. An 80-pin LFQFP package exposes a comparatively broad set of peripheral and general-purpose I/O options in a 12 mm by 12 mm footprint. These headline characteristics distinguish it from smaller-pin-count RL78 devices and make it useful when a design needs more external connections than a compact 32-pin or 48-pin package can provide.

The LFQFP package is a surface-mount technology family with gull-wing leads on four sides. Its 80 pins allow more signal routing than compact leadless packages, making it practical for mixed-signal control boards, communication modules, industrial controllers, and embedded measurement systems. Because the full electrical limits, peripheral configuration, pin names, and programming details are not included in the product listing excerpt, the manufacturer datasheet should be treated as the controlling reference for board design, clock setup, peripheral assignment, and firmware development.

Typical applications include industrial sensor-control equipment, compact motor-control systems, communication-enabled control panels, battery-powered instrumentation, and general embedded products. The 32 MHz clock supports responsive control routines and serial-data handling, while the 64 KB flash capacity provides room for application firmware, configuration data, and a bootloader. The 80-pin package is particularly useful when a system requires both programmable logic and a larger number of external peripheral connections.

A critical design step is to obtain the official datasheet and verify the complete pin list, electrical limits, decoupling requirements, programming interface, and peripheral multiplexing before layout. Confirm that every required signal can be assigned without conflicts and that the selected regulator, clock source, and external components meet the device requirements. Do not infer analog performance, GPIO current, or operating-temperature limits from the package and headline processor specifications alone.

This product page combines the verified device identity, package, architecture, memory capacity, and operating frequency with practical selection guidance, replacement checks, and design-oriented cautions. It distinguishes documented facts from parameters requiring confirmation in the manufacturer datasheet, helping engineers evaluate the R5F10FMEDFB#X0 before committing a PCB footprint or firmware baseline.

Pilihan pengganti yang segera untuk R5F10FMEDFB#X0 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera R5F10FMEDFB#X0 (sama faktor bentuk dan kaki) — berbeza dalam Manufacturer, Product Type.

Renesas Electronics
Manufacturer: Renesas Electronics
Product Type: 16-bit microcontroller
Bandingkan Dengan R5F10FMEDFB#X0 →

R5F10FMEDFB#YK1

✅ Masuk Drop-In
📦 80-LFQFP (12x12 mm)
Same documented 16-bit RL78/G1E architecture, 32 MHz frequency, 64 KB flash, and 80-LFQFP package; ordering-code qualification and temperature characteristics require confirmation.

📋 Alternatif rujukan (tidak dalam katalog)

R5F10FMEDFB#X0 Penilaian maksimum & Ciri-ciri Elektrik

Product Type RL78/G1E 16-bit microcontroller
Maximum CPU Frequency 32 MHz
CPU Architecture 16-bit
Flash Memory Size 64 KB
Flash Memory Organization 64K x 8 bits
Package Type 80-pin LFQFP
Package Dimensions 12 mm x 12 mm
Jenis Pemasangan Surface mount
Product Series RL78/G1E
Manufacturer Renesas Electronics Corporation
Program Memory Type Embedded flash

Panduan Konfigurasi Pin R5F10FMEDFB#X0 12 mm x 12 mm

Konfigurasi pin untuk R5F10FMEDFB#X0 (12 mm x 12 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 12 mm x 12 mm untuk R5F10FMEDFB#X0

Tiada data garisan pin yang diperoleh untuk R5F10FMEDFB#X0.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

R5F10FMEDFB#X0 patut untuk 6 aplikasis: Industrial Sensor and Control Systems, Compact Motor Control, Communication-Enabled Control Panels, Battery-Powered Instrumentation, Embedded Communication Modules, Consumer Appliance Control.

🏭

Industrial Sensor and Control Systems

The R5F10FMEDFB#X0 fits compact industrial control systems that coordinate sensor inputs, digital logic, and actuator outputs. Its 16-bit RL78/G1E core operates up to 32 MHz, providing headroom for time-sensitive control loops, status handling, and communication tasks, while 64 KB of embedded flash accommodates application firmware, configuration, and calibration data. The 80-pin LFQFP offers more external connection options than compact low-pin-count microcontrollers. Before design release, verify ADC performance, timer channels, serial interfaces, supply limits, and temperature-grade requirements in the manufacturer datasheet, then isolate noisy industrial interfaces with appropriate filtering and grounding.

⚡

Compact Motor Control

The R5F10FMEDFB#X0 can serve as the supervisory controller in a compact motor or actuator-control assembly. A 32 MHz clock allows the firmware to service timers, evaluate sensor states, and update motor commands deterministically, while the 16-bit architecture supports ordinary industrial control calculations. Its 64 KB flash provides room for startup logic, motion sequences, diagnostics, and configurable operating parameters. The 80-pin LFQFP can reduce routing complexity in systems requiring multiple external control signals. Verify the selected motor-driver interface, PWM capability, fault pins, voltage limits, and timing behavior against the manufacturer datasheet before assigning pins or designing the power stage.

🌐

Communication-Enabled Control Panels

The R5F10FMEDFB#X0 is appropriate for communication-enabled control panels that aggregate local sensing, user commands, and diagnostic reporting. Its 32 MHz RL78/G1E processor can handle protocol processing alongside real-time control tasks, and the 64 KB embedded flash can store firmware plus communication configuration. The broad 80-pin package offers more options for connecting a communications controller, status indicators, input devices, and external interfaces. Confirm the available serial channels, supported electrical levels, pin multiplexing, and peripheral allocation in the manufacturer datasheet. In production hardware, provide clean clocking, controlled impedance routing, and separation between communications signals, sensitive inputs, and switching-power stages.

🔧

Battery-Powered Instrumentation

The R5F10FMEDFB#X0 can support compact battery-powered instruments where local computation must coexist with careful power management. The RL78/G1E architecture is suitable for embedded measurement, logging, and control functions, while the 64 KB flash allows application code and stored parameters to reside on-chip. Although the 80-pin LFQFP offers extensive connectivity, engineers should still minimize external components and use low-leakage peripherals. Verify sleep-mode behavior, clock-stop requirements, wake-up sources, analog performance, and active-current limits in the manufacturer datasheet. Validate the complete sleep-current budget with the real sensor, regulator, pull networks, and indicator loads rather than relying on the processor headline specifications alone.

📡

Embedded Communication Modules

The R5F10FMEDFB#X0 fits embedded communication modules that require a dedicated controller alongside a network or serial transceiver. The 32 MHz 16-bit core can manage framing, command processing, timeout logic, and supervisory functions, while 64 KB of flash provides space for protocol handlers and configuration. Its 80-pin LFQFP package offers sufficient external pins for a communications device, status controls, and auxiliary sensors. Exact UART, SPI, I2C, or other interface capabilities must be confirmed for the selected device configuration in the manufacturer datasheet. Keep radio or high-speed digital traces away from clock and sensitive analog pins, and follow the transceiver supplier's reference layout for controlled-impedance and grounding requirements.

🏠

Consumer Appliance Control

The R5F10FMEDFB#X0 is suitable for consumer appliances needing several discrete controls, user-interface inputs, and embedded sequencing. Its 32 MHz processor supports responsive state-machine control, while 64 KB of flash can hold firmware, operating profiles, and diagnostic logic. The 80-pin LFQFP is useful when the appliance controller includes displays, buttons, relays, sensing lines, and communications links. Review ADC accuracy, debounce-capable timers, output-driver limits, and supply requirements in the manufacturer datasheet before finalizing the pin map. For mains-connected products, maintain the required isolation and safety separation between the control MCU and power circuitry, and test EMC susceptibility in the final mechanical configuration.

What is the R5F10FMEDFB#X0?
The R5F10FMEDFB#X0 is a Renesas Electronics RL78/G1E 16-bit microcontroller with a maximum CPU frequency of 32 MHz and 64 KB of embedded flash memory. According to the manufacturer product listing, it is packaged in an 80-pin LFQFP measuring 12 mm by 12 mm. It is intended for embedded-control systems that require a 32 MHz processor, 64 KB of nonvolatile program storage, and access to numerous external I/O and peripheral connections.
What are the key specifications of R5F10FMEDFB#X0?
The key R5F10FMEDFB#X0 specifications are a 16-bit RL78/G1E architecture, 32 MHz maximum operating frequency, 64 KB of flash memory organized as 64K by 8 bits, and an 80-pin LFQFP package. The Renesas Electronics product listing also identifies the package as 12 mm by 12 mm. Other electrical characteristics, including supply voltage, RAM, GPIO count, and temperature limits, must be confirmed in the manufacturer datasheet.
Where can I download the R5F10FMEDFB#X0 datasheet PDF?
The R5F10FMEDFB#X0 datasheet PDF is available through the listed document links, including the linked PDF hosted for this exact Renesas Electronics part number. The manufacturer datasheet is the controlling document for pin assignments, electrical limits, memory maps, peripheral functions, programming procedures, and recommended application circuits. Use the exact R5F10FMEDFB#X0 ordering code when selecting the appropriate datasheet revision and package variant.
Where can I find the R5F10FMEDFB#X0 pinout?
The R5F10FMEDFB#X0 pinout should be taken from the pin-description table in the manufacturer datasheet for the 80-pin LFQFP package. The product listing confirms an 80-pin LFQFP and its 12 mm by 12 mm size, but it does not reproduce individual pin numbers or signal names. Before routing a PCB, verify power pins, ground pins, reset, clock inputs, programming signals, and every peripheral multiplexing option against that table.
What package does the R5F10FMEDFB#X0 use?
The R5F10FMEDFB#X0 uses an 80-pin LFQFP surface-mount package measuring 12 mm by 12 mm. The LFQFP family places gull-wing leads on all four sides of the package, providing a larger pin count than compact quad flat packages with exposed pads. Confirm the land pattern, pin-1 orientation, lead pitch, soldering profile, and exposed-pad requirements in the official package drawing before PCB release.
What can replace the R5F10FMEDFB#X0?
The R5F10FMEDFB#YK1 is the closest identified replacement because it is a Renesas Electronics R5F10FMEDFB-series device with the same 16-bit RL78/G1E classification, 32 MHz frequency, 64 KB flash configuration, and 80-pin 12 mm by 12 mm LFQFP package. Treat the ordering-code suffix as a potentially meaningful grade or qualification distinction and verify operating temperature, automotive qualification, lifecycle status, and pin compatibility before substitution.
Is R5F10FMEDFB#YK1 the same as R5F10FMEDFB#X0?
The R5F10FMEDFB#YK1 and R5F10FMEDFB#X0 share the documented RL78/G1E microcontroller class, 32 MHz maximum frequency, 64 KB flash memory, and 80-pin LFQFP package. Their ordering-code suffixes may indicate different qualification, temperature, or market conditions. They are therefore strong footprint candidates, but final interchangeability requires confirmation of electrical limits, temperature grade, qualification, lifecycle status, and the complete pin map.
When should I choose R5F10FMEDFB#X0 over R5F10FMEDFB#YK1?
Choose R5F10FMEDFB#X0 when its specified ordering-code and qualification requirements fit the target product, while retaining the confirmed 32 MHz RL78/G1E core, 64 KB flash, and 80-pin LFQFP footprint. Choose R5F10FMEDFB#YK1 only after checking the suffix-specific grade and qualification. For both candidates, firmware startup, peripheral mapping, clock configuration, and supply requirements must remain compatible with the existing design.
Is the R5F10FMEDFB#X0 suitable for industrial control applications?
The R5F10FMEDFB#X0 is structurally suitable for embedded industrial control because it provides a 32 MHz 16-bit RL78/G1E processor, 64 KB of embedded flash, and an 80-pin package for external peripheral connections. Its suitability for a specific industrial system still depends on temperature grade, supply range, communications interfaces, analog functions, timing, and certification requirements. Confirm those parameters in the manufacturer datasheet before qualification.
How much flash memory does the R5F10FMEDFB#X0 have?
The R5F10FMEDFB#X0 has 64 KB of embedded flash memory, organized as 64K by 8 bits. According to the Renesas Electronics product classification, that nonvolatile memory supports embedded firmware storage and associated program data. When sizing the application, reserve space for boot code, application code, constants, calibration values, and future updates, and confirm the device's writable area and endurance characteristics in the manufacturer datasheet.
What is the CPU frequency of R5F10FMEDFB#X0?
The R5F10FMEDFB#X0 operates at up to 32 MHz. This clock rate supports time-sensitive control, peripheral servicing, and serial-communication routines in an RL78/G1E embedded design. Actual operating frequency depends on the configured clock source, supply conditions, and internal divider settings. Use the manufacturer datasheet to determine whether the device is intended for a specific external crystal, ceramic resonator, or internal oscillator configuration.
Where to buy R5F10FMEDFB#X0 online?
Use the Request a Quote form on this page to request the R5F10FMEDFB#X0, current commercial terms, stock confirmation, and expected delivery schedule. The part is an RL78/G1E 16-bit, 32 MHz microcontroller with 64 KB of flash in an 80-pin 12 mm by 12 mm LFQFP. Providing the exact ordering code and required quantity helps prevent confusion with the related R5F10FMEDFB#YK1 suffix.
What is the price of R5F10FMEDFB#X0?
The current commercial price for R5F10FMEDFB#X0 should be requested through the Request a Quote form on this page because pricing and availability can change with quantity, packaging, and market conditions. The verified listing identifies the exact device as an RL78/G1E 16-bit, 32 MHz microcontroller with 64 KB of flash in an 80-pin LFQFP. Include the required order quantity and production schedule when requesting a quotation.
What is the lead time for R5F10FMEDFB#X0?
The current lead time and available quantity for R5F10FMEDFB#X0 should be confirmed through the Request a Quote form on this page. Lead time can depend on order volume, backorder status, authorized-channel inventory, and production planning. Include your target quantity, requested delivery date, and packaging preference so the commercial response can be tied to the exact 80-pin LFQFP ordering code.
Is R5F10FMEDFB#X0 in stock?
Current stock for R5F10FMEDFB#X0 is confirmed through the Request a Quote form on this page rather than inferred from a general product listing. Submit the required quantity and intended delivery date to obtain a stock and lead-time response. If your design may use the closely related R5F10FMEDFB#YK1, mention that candidate separately and verify its grade-specific qualification before treating it as an interchangeable alternative.
How do I evaluate an R5F10FMEDFB#X0 replacement?
Evaluate an R5F10FMEDFB#X0 replacement by matching package geometry, pin names and multiplexing, CPU architecture, clock architecture, flash and RAM capacity, supply voltage, peripheral set, programming interface, temperature grade, qualification, and lifecycle status. A matching 80-pin LFQFP outline alone does not prove drop-in compatibility. Begin with the R5F10FMEDFB#YK1 candidate, then compare the exact manufacturer suffix characteristics and complete datasheets before approving a substitution.

Data referensi kejuruteraan untuk R5F10FMEDFB#X0 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the R5F10FMEDFB#X0 when the design requires a Renesas RL78/G1E microcontroller with a 16-bit core, 32 MHz operation, 64 KB of embedded flash, and an 80-pin 12 mm by 12 mm LFQFP. It is particularly appropriate for compact embedded systems that need more external I/O than low-pin-count MCUs provide. The R5F10FMEDFB#YK1 is the closest identified alternative because its documented series, architecture, frequency, memory size, and package match. Select that suffix only after checking grade, qualification, temperature, lifecycle, and electrical differences. For either candidate, the existing schematic and firmware must be reviewed for peripheral multiplexing, clock configuration, programming, and power requirements. If fewer than five qualified drop-in options are available, do not substitute an assembly that merely has a similar quad-flat package; prioritize exact pin, electrical, and lifecycle compatibility.

Perbandingan dengan Gantian

Parametr Produk Ini R5F10FMEDFB#YK1
Brand Renesas Electronics Renesas Electronics
Package 80-LFQFP (12x12 mm) 80-LFQFP (12x12 mm)
Product Series RL78/G1E RL78/G1E
CPU Architecture 16-bit 16-bit
Maximum CPU Frequency 32 MHz 32 MHz
Flash Memory Size 64 KB 64 KB
Flash Memory Organization 64K x 8 bits 64K x 8 bits
Program Memory Type Embedded flash Embedded flash
Ordering-Code Qualification #X0 - confirm suffix-specific characteristics #YK1 - confirm suffix-specific characteristics

Penyeberangsung Jelas

  • Documented match to the closest identified ordering-code alternative (vsR5F10FMEDFB#YK1)
  • Broad external connectivity in a 12 mm square package (vsR5F10FMEDFB#YK1)
  • 64 KB of embedded flash for firmware and configuration (vsR5F10FMEDFB#YK1)

Catatan Desain

Use the official 80-LFQFP land pattern and verify pin-1 orientation before routing. The package has 80 leads on a 12 mm by 12 mm body, so board-space planning must include lead pitch, toe extension, solder mask clearance, and assembly tolerances. Do not derive the footprint from a generic LFQFP drawing without checking the exact manufacturer package drawing. Reserve unobstructed routing for the programming interface and clock circuitry, and place decoupling structures close to the device supply pins once their locations are confirmed.

Do not approve a replacement solely because both devices use an 80-pin LFQFP and share the RL78/G1E designation. Compare suffix-specific temperature grade, qualification, supply limits, clock settings, peripheral multiplexing, pin states, and programming requirements. The R5F10FMEDFB#YK1 is a strong footprint candidate, but only the complete manufacturer documentation can establish whether an existing R5F10FMEDFB#X0 design can be converted without schematic or firmware changes.

Keep the clock route short, continuous, and away from switching nodes and high-current return paths. Confirm the intended clock source, loading, startup behavior, and stability requirements in the manufacturer datasheet. For communication and sensing functions, assign pins only after reviewing the peripheral multiplexing matrix. Place input filtering near the relevant pins when source impedance or adjacent switching noise could affect the signal, and maintain a continuous ground reference beneath and around the routed interfaces.

Base the supply network on the confirmed operating-voltage and current limits for the exact ordering code, not on the processor frequency alone. Use the manufacturer's recommended decoupling arrangement and validate startup, voltage ramp, transient response, and brownout behavior in the assembled system. If the controller sits beside a motor driver, relay, display, or communications module, separate high-current paths from sensitive return currents and test the complete system for conducted and radiated emissions before production.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The product listing confirms the device identity and package but does not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status for this exact ordering code. AEC-Q100 is marked not applicable because the exact suffix qualification was not identified.

Data disahkan pada: 2026-11-10 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

R5F10FMEDFB#X0 datasheet R5F10FMEDFB#X0 specifications R5F10FMEDFB#X0 pinout R5F10FMEDFB#X0 datasheet pdf R5F10FMEDFB#X0 equivalent R5F10FMEDFB#X0 replacement R5F10FMEDFB#X0 footprint R5F10FMEDFB#X0 application circuit R5F10FMEDFB#X0 vs R5F10FMEDFB#YK1 Renesas R5F10FMEDFB#X0 R5F10FMEDFB#X0 price R5F10FMEDFB#X0 stock R5F10FMEDFB#X0 programming R5F10FMEDFB 32MHz 64KB R5F10FMEDFB 80-LFQFP pinout

Komponen dan Tanda berkaitan

Renesas Electronics R5F10FMEDFB#X0 R5F10FMEDFB#YK1 RL78/G1E RL78 16-bit microcontroller embedded microcontroller microcontroller semiconductor 32 MHz 64 KB flash 64K x 8 bits embedded flash 80-LFQFP LFQFP package family quad flat package surface mount SMD 12 mm by 12 mm package industrial control motor control sensor control embedded communication battery-powered instrumentation consumer appliance control
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ