R5F10FMEDFB#X0 - 32MHz 64KB Flash MCU | Renesas Electronics
MPN: R5F10FMEDFB#X0 ✗ 停產R5F10FMEDFB#X0 概覽
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals such as timers, serial interfaces, and analog-to-digital converters. Within the embedded-control hierarchy, the R5F10FMEDFB#X0 belongs to the Renesas RL78 family and is designed to execute firmware that reads sensors, controls actuators, manages communications, and supervises industrial or consumer equipment. The RL78 architecture is associated with energy-efficient embedded processing, making it suitable for compact systems where responsive control and low system overhead are important.
The verified product classification identifies this device as an RL78/G1E microcontroller with a 16-bit architecture, 32 MHz operating frequency, and 64 KB organized as 64K by 8 bits of flash. An 80-pin LFQFP package exposes a comparatively broad set of peripheral and general-purpose I/O options in a 12 mm by 12 mm footprint. These headline characteristics distinguish it from smaller-pin-count RL78 devices and make it useful when a design needs more external connections than a compact 32-pin or 48-pin package can provide.
The LFQFP package is a surface-mount technology family with gull-wing leads on four sides. Its 80 pins allow more signal routing than compact leadless packages, making it practical for mixed-signal control boards, communication modules, industrial controllers, and embedded measurement systems. Because the full electrical limits, peripheral configuration, pin names, and programming details are not included in the product listing excerpt, the manufacturer datasheet should be treated as the controlling reference for board design, clock setup, peripheral assignment, and firmware development.
Typical applications include industrial sensor-control equipment, compact motor-control systems, communication-enabled control panels, battery-powered instrumentation, and general embedded products. The 32 MHz clock supports responsive control routines and serial-data handling, while the 64 KB flash capacity provides room for application firmware, configuration data, and a bootloader. The 80-pin package is particularly useful when a system requires both programmable logic and a larger number of external peripheral connections.
A critical design step is to obtain the official datasheet and verify the complete pin list, electrical limits, decoupling requirements, programming interface, and peripheral multiplexing before layout. Confirm that every required signal can be assigned without conflicts and that the selected regulator, clock source, and external components meet the device requirements. Do not infer analog performance, GPIO current, or operating-temperature limits from the package and headline processor specifications alone.
This product page combines the verified device identity, package, architecture, memory capacity, and operating frequency with practical selection guidance, replacement checks, and design-oriented cautions. It distinguishes documented facts from parameters requiring confirmation in the manufacturer datasheet, helping engineers evaluate the R5F10FMEDFB#X0 before committing a PCB footprint or firmware baseline.
直接替換替代品,適用於 R5F10FMEDFB#X0 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: R5F10FMEDFB#X0 (相同外形與佔位) — 差異在於 Manufacturer, Product Type.
R5F10FMEDFB#YK1
✅ 直接替換📋 參考替代品(不在目錄中)
R5F10FMEDFB#X0 最大額定值與電氣特性
| Product Type | RL78/G1E 16-bit microcontroller |
| Maximum CPU Frequency | 32 MHz |
| CPU Architecture | 16-bit |
| Flash Memory Size | 64 KB |
| Flash Memory Organization | 64K x 8 bits |
| Package Type | 80-pin LFQFP |
| Package Dimensions | 12 mm x 12 mm |
| 安裝類型 | Surface mount |
| Product Series | RL78/G1E |
| Manufacturer | Renesas Electronics Corporation |
| Program Memory Type | Embedded flash |
R5F10FMEDFB#X0 12 mm x 12 mm 腳位配置指南
R5F10FMEDFB#X0(12 mm x 12 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: R5F10FMEDFB#X0.
請參閱 資料表 以查看完整腳位配置。
典型應用
R5F10FMEDFB#X0 適用於 6 應用s: Industrial Sensor and Control Systems, Compact Motor Control, Communication-Enabled Control Panels, Battery-Powered Instrumentation, Embedded Communication Modules, Consumer Appliance Control.
Industrial Sensor and Control Systems
The R5F10FMEDFB#X0 fits compact industrial control systems that coordinate sensor inputs, digital logic, and actuator outputs. Its 16-bit RL78/G1E core operates up to 32 MHz, providing headroom for time-sensitive control loops, status handling, and communication tasks, while 64 KB of embedded flash accommodates application firmware, configuration, and calibration data. The 80-pin LFQFP offers more external connection options than compact low-pin-count microcontrollers. Before design release, verify ADC performance, timer channels, serial interfaces, supply limits, and temperature-grade requirements in the manufacturer datasheet, then isolate noisy industrial interfaces with appropriate filtering and grounding.
推薦
Compact Motor Control
The R5F10FMEDFB#X0 can serve as the supervisory controller in a compact motor or actuator-control assembly. A 32 MHz clock allows the firmware to service timers, evaluate sensor states, and update motor commands deterministically, while the 16-bit architecture supports ordinary industrial control calculations. Its 64 KB flash provides room for startup logic, motion sequences, diagnostics, and configurable operating parameters. The 80-pin LFQFP can reduce routing complexity in systems requiring multiple external control signals. Verify the selected motor-driver interface, PWM capability, fault pins, voltage limits, and timing behavior against the manufacturer datasheet before assigning pins or designing the power stage.
推薦
Communication-Enabled Control Panels
The R5F10FMEDFB#X0 is appropriate for communication-enabled control panels that aggregate local sensing, user commands, and diagnostic reporting. Its 32 MHz RL78/G1E processor can handle protocol processing alongside real-time control tasks, and the 64 KB embedded flash can store firmware plus communication configuration. The broad 80-pin package offers more options for connecting a communications controller, status indicators, input devices, and external interfaces. Confirm the available serial channels, supported electrical levels, pin multiplexing, and peripheral allocation in the manufacturer datasheet. In production hardware, provide clean clocking, controlled impedance routing, and separation between communications signals, sensitive inputs, and switching-power stages.
推薦
Battery-Powered Instrumentation
The R5F10FMEDFB#X0 can support compact battery-powered instruments where local computation must coexist with careful power management. The RL78/G1E architecture is suitable for embedded measurement, logging, and control functions, while the 64 KB flash allows application code and stored parameters to reside on-chip. Although the 80-pin LFQFP offers extensive connectivity, engineers should still minimize external components and use low-leakage peripherals. Verify sleep-mode behavior, clock-stop requirements, wake-up sources, analog performance, and active-current limits in the manufacturer datasheet. Validate the complete sleep-current budget with the real sensor, regulator, pull networks, and indicator loads rather than relying on the processor headline specifications alone.
推薦
Embedded Communication Modules
The R5F10FMEDFB#X0 fits embedded communication modules that require a dedicated controller alongside a network or serial transceiver. The 32 MHz 16-bit core can manage framing, command processing, timeout logic, and supervisory functions, while 64 KB of flash provides space for protocol handlers and configuration. Its 80-pin LFQFP package offers sufficient external pins for a communications device, status controls, and auxiliary sensors. Exact UART, SPI, I2C, or other interface capabilities must be confirmed for the selected device configuration in the manufacturer datasheet. Keep radio or high-speed digital traces away from clock and sensitive analog pins, and follow the transceiver supplier's reference layout for controlled-impedance and grounding requirements.
推薦
Consumer Appliance Control
The R5F10FMEDFB#X0 is suitable for consumer appliances needing several discrete controls, user-interface inputs, and embedded sequencing. Its 32 MHz processor supports responsive state-machine control, while 64 KB of flash can hold firmware, operating profiles, and diagnostic logic. The 80-pin LFQFP is useful when the appliance controller includes displays, buttons, relays, sensing lines, and communications links. Review ADC accuracy, debounce-capable timers, output-driver limits, and supply requirements in the manufacturer datasheet before finalizing the pin map. For mains-connected products, maintain the required isolation and safety separation between the control MCU and power circuitry, and test EMC susceptibility in the final mechanical configuration.
推薦
推薦產品摘要
工程參考資料,適用於 R5F10FMEDFB#X0 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | R5F10FMEDFB#YK1 |
|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics |
| Package | 80-LFQFP (12x12 mm) | 80-LFQFP (12x12 mm) |
| Product Series | RL78/G1E | RL78/G1E |
| CPU Architecture | 16-bit | 16-bit |
| Maximum CPU Frequency | 32 MHz | 32 MHz |
| Flash Memory Size | 64 KB | 64 KB |
| Flash Memory Organization | 64K x 8 bits | 64K x 8 bits |
| Program Memory Type | Embedded flash | Embedded flash |
| Ordering-Code Qualification | #X0 - confirm suffix-specific characteristics | #YK1 - confirm suffix-specific characteristics |
主要差異化特點
- Documented match to the closest identified ordering-code alternative (對比R5F10FMEDFB#YK1)
- Broad external connectivity in a 12 mm square package (對比R5F10FMEDFB#YK1)
- 64 KB of embedded flash for firmware and configuration (對比R5F10FMEDFB#YK1)
設計說明
Use the official 80-LFQFP land pattern and verify pin-1 orientation before routing. The package has 80 leads on a 12 mm by 12 mm body, so board-space planning must include lead pitch, toe extension, solder mask clearance, and assembly tolerances. Do not derive the footprint from a generic LFQFP drawing without checking the exact manufacturer package drawing. Reserve unobstructed routing for the programming interface and clock circuitry, and place decoupling structures close to the device supply pins once their locations are confirmed.
Do not approve a replacement solely because both devices use an 80-pin LFQFP and share the RL78/G1E designation. Compare suffix-specific temperature grade, qualification, supply limits, clock settings, peripheral multiplexing, pin states, and programming requirements. The R5F10FMEDFB#YK1 is a strong footprint candidate, but only the complete manufacturer documentation can establish whether an existing R5F10FMEDFB#X0 design can be converted without schematic or firmware changes.
Keep the clock route short, continuous, and away from switching nodes and high-current return paths. Confirm the intended clock source, loading, startup behavior, and stability requirements in the manufacturer datasheet. For communication and sensing functions, assign pins only after reviewing the peripheral multiplexing matrix. Place input filtering near the relevant pins when source impedance or adjacent switching noise could affect the signal, and maintain a continuous ground reference beneath and around the routed interfaces.
Base the supply network on the confirmed operating-voltage and current limits for the exact ordering code, not on the processor frequency alone. Use the manufacturer's recommended decoupling arrangement and validate startup, voltage ramp, transient response, and brownout behavior in the assembled system. If the controller sits beside a motor driver, relay, display, or communications module, separate high-current paths from sensitive return currents and test the complete system for conducted and radiated emissions before production.
合規資訊
The product listing confirms the device identity and package but does not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status for this exact ordering code. AEC-Q100 is marked not applicable because the exact suffix qualification was not identified.