Skyworks Solutions

SI3210-GTR - 3.3V/5V Single-Channel SLIC | Skyworks

MPN: SI3210-GTR ✓ Aktif
3.3 V or 5 V Vdss 41 mA Id 38-pin TSSOP Package
MOQ: 1 |

SI3210-GTR Ringkasan

Skyworks Solutions SI3210-GTR is a single-channel Subscriber Line Interface Concept and voice CODEC with a 3.3 V or 5 V supply, 60 dB line performance, and a 38-pin TSSOP tape-and-reel package. It integrates a ProSLIC-compatible telephone-line interface with PCM and SPI connectivity for customer premise equipment, voice gateways, and embedded analog-telephone systems.

A SLIC is the analog interface between a telephone line and a digital voice system. The larger category hierarchy is SLIC → subscriber line interface circuit → voice-access IC → telecom interface IC → semiconductor. By combining line termination, voice conversion, and battery-generation support in one programmable device, the SI3210-GTR simplifies the hardware required for a single analog phone channel while retaining digital control from a host processor.

The SI3210-GTR supports 3.3 V and 5 V operation and is identified as a one-channel SLIC/CODEC. Its stated 60 dB performance figure and 41 mA operating-current specification make it relevant to compact voice interfaces where supply compatibility and line-channel performance matter. PCM connectivity supports transport of digital voice samples, while SPI access supports configuration and control from an embedded controller.

The ProSLIC architecture implements a programmable CMOS SLIC and CODEC in one device. The SI3210 version integrates battery generation, whereas the closely related SI3211 architecture provides battery selection. That distinction is important when designing a new telephone interface because the required external line-support network and firmware configuration can differ even when the family-level voice functions are similar.

Typical uses include analog adapters, voice-over-PoE gateways, customer premise equipment, embedded voice recorders, and industrial telephone extensions. A system designer can use the integrated CODEC to reduce the number of separate analog-to-digital and digital-to-analog conversion blocks while retaining a programmable line interface.

The principal design consideration is line-network compatibility. The SLIC must be paired with appropriate external protection, coupling, and battery-support components, and its firmware configuration must match the intended line impedance and country-specific ringing plan. PCB layout should preserve clean separation between sensitive voice signals, digital control traces, and switching or power-supply nodes.

This page combines device specifications, lifecycle and sourcing information, drop-in family alternatives, parameter comparisons, and application-focused design guidance. It also highlights the difference between programmable SLIC functionality and a basic codec so engineers can evaluate signal-chain completeness before committing a board layout.

Pilihan pengganti yang segera untuk SI3210-GTR — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera SI3210-GTR (sama faktor bentuk dan kaki) — berbeza dalam Package, Channel Count, Device Type, Supply Voltage, Battery Voltage Generation.

Silicon Labs
Channel Count: 1 channel
Bandingkan Dengan SI3210-GTR →
Skyworks Solutions
Device Type: Programmable CMOS SLIC and codec
Bandingkan Dengan SI3210-GTR →
Silicon Labs
Package: 38-TSSOP
Channel Count: Single channel
Device Type: Programmable CMOS SLIC/CODEC
Bandingkan Dengan SI3210-GTR →
Silicon Labs
Channel Count: 1 channel
Device Type: Programmable CMOS SLIC/codec
Supply Voltage: 5 V
Bandingkan Dengan SI3210-GTR →

SI3210-GT

✅ Masuk Drop-In
Skyworks Solutions
📦 38-pin TSSOP
Programmable CMOS SLIC and codec · 3.13 V · 5.25 V · 38-pin TSSOP · Low-voltage CMOS · SLIC, codec and battery-voltage generation · Programmable device · Telecom interface IC

Hubungi untuk harga

Lihat Datasheet →

SI3210-FT

✅ Masuk Drop-In
Silicon Labs
📦 38-pin TSSOP
Programmable CMOS SLIC/codec · 1 channel · 3.3 V or 5 V · 41 mA · 88 mA typical · 60 dB · 5 REN · 90 VPK

Hubungi untuk harga

Lihat Datasheet →

SI3210-KT

✅ Masuk Drop-In
Silicon Labs
📦 38-pin TSSOP
Programmable CMOS SLIC/CODEC · Telecom Interface IC · Subscriber Line Interface Concept (SLIC), CODEC · Single channel · 3.13 V · 5.25 V · 38-TSSOP · Surface-mount TSSOP

Hubungi untuk harga

Lihat Datasheet →

SI3211-GT

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 38-pin TSSOP
Retains the 38-pin TSSOP footprint but changes battery generation to battery selection, a 1-function architectural difference.

📋 Alternatif rujukan (tidak dalam katalog)

SI3211-KT

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
Silicon Labs
📦 38-pin TSSOP
Programmable CMOS SLIC/codec · 1 channel · 38 terminals · 38 pins · 5 V · Commercial · TSSOP · Gull wing

Hubungi untuk harga

Lihat Datasheet →

SI3210-GTR Spesifikasi

Product Type Single-channel SLIC and voice CODEC
Number of Channels 1 channel
Tegangan Pemberi Arus 3.3 V or 5 V
Operating Current 41 mA
Line Performance 60 dB
Digital Interface PCM and SPI
Kemasan 38-pin TSSOP
Packaging Tape and reel
Jenis Pemasangan Surface mount
Minimum Supply Voltage 3.13 V
Maximum Supply Voltage 5.25 V
Minimum Operating Temperature 0 C
Battery Function Battery generation
Codec Architecture Programmable CMOS SLIC/CODEC
Target Application Analog telephone customer premise equipment

Panduan Konfigurasi Pin SI3210-GTR 38-pin tssop

Konfigurasi pin untuk SI3210-GTR (38-pin tssop pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 38-pin tssop untuk SI3210-GTR

Tiada data garisan pin yang diperoleh untuk SI3210-GTR.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

SI3210-GTR patut untuk 6 aplikasis: Analog Voice Gateway, Customer Premise Equipment, Voice-Over-PoE Terminal, Industrial Telephone Extension, Embedded Voice Recorder, VoIP Fax Bridge.

🌐

Analog Voice Gateway

The SI3210-GTR fits an analog telephone gateway because it combines a one-channel SLIC, voice CODEC, and battery-generation function in a single 38-pin TSSOP device. Its 3.3 V or 5 V operating range allows the same interface section to serve legacy 5 V logic systems or lower-voltage embedded platforms, while PCM transfers voice samples to a digital processor. The stated 60 dB line performance provides a defined starting point for voice-channel design. Using the integrated codec reduces the number of external conversion blocks, but the line network, protection components, ringing plan, and firmware calibration must still match the target telephone line.

📞

Customer Premise Equipment

Customer premise equipment requires a compact interface between an analog subscriber line and the equipment's digital voice-processing path. The SI3210-GTR provides that function in one programmable CMOS device, combining the SLIC, CODEC, and battery generation while exposing PCM and SPI connectivity. Its single-channel architecture is appropriate for one-line fax, voice terminal, or analog adapter designs, and its 3.3 V or 5 V supply flexibility simplifies adaptation to different host systems. The 38-pin TSSOP package supports surface-mount production, although correct thermal pad layout, line-impedance configuration, and external protection remain essential.

🌐

Voice-Over-PoE Terminal

A voice-over-PoE terminal can use the SI3210-GTR to add an analog telephone port alongside packetized voice service. The integrated one-channel SLIC and CODEC handles the analog line interface, while PCM provides a conventional digital voice path to a communications processor and SPI permits configuration and control. Operating from 3.3 V or 5 V supports both lower-voltage and established 5 V system architectures, and the 60 dB stated performance is useful when establishing line-level design targets. The PoE supply must remain independent from the telephone-line battery requirements so switching-node noise does not degrade voice quality.

🏭

Industrial Telephone Extension

Industrial installations frequently combine an analog extension line with a digital controller for call routing, monitoring, or emergency communication. The SI3210-GTR provides the physical line and voice-conversion interface in one 38-pin TSSOP package, with 3.3 V or 5 V operation allowing integration into existing control electronics. Its 60 dB stated line characteristic provides a concrete design benchmark, and PCM/SPI connectivity supports both voice transport and register-level control. Because industrial environments may expose the line to larger transients, designers should pair the device with a properly engineered protection network rather than relying on the interface IC alone.

🎙️

Embedded Voice Recorder

An embedded voice recorder can use the SI3210-GTR when it must accept an analog telephone line and deliver PCM audio to a digital processor. Integrating the SLIC and CODEC avoids a separate analog-to-digital converter, while the battery-generation function supports the line interface commonly required by analog telephones. The device accepts a 3.3 V or 5 V supply and communicates through PCM and SPI, enabling host control of line parameters and retrieval of voice data. The single-channel format is well matched to one recorded line, but the design must account for ringing, off-hook behavior, line-power demand, and the external passive network.

📠

VoIP Fax Bridge

A VoIP fax bridge that must retain an analog fax endpoint can place the SI3210-GTR between the line and a packetized voice subsystem. Its one-channel SLIC and integrated CODEC support the required analog-to-digital conversion, while PCM provides a conventional interface to the bridge processor and SPI supports configuration and diagnostics. The 3.3 V or 5 V supply flexibility simplifies adaptation to processor and line-power architectures, and the 38-pin TSSOP package minimizes board area. Production validation should include line-state timing, tone handling, ringing cadence, and immunity to nearby switching supplies.

What is the SI3210-GTR?
The SI3210-GTR is a single-channel programmable CMOS SLIC and voice CODEC for analog telephone customer premise equipment. It integrates a subscriber line interface, voice codec, and battery-generation function, while providing PCM and SPI connectivity. According to the manufacturer datasheet for the SI3210/Si3211 family, the device is intended for a complete analog telephone interface and operates from a 3.3 V or 5 V supply in a 38-pin TSSOP package.
Where can I download the SI3210 datasheet PDF?
The SI3210 family datasheet PDF is available from the manufacturer-linked document hosted by Mouser at https://www.mouser.com/datasheet/2/368/si3210-38974.pdf. It covers the SI3210 and SI3211 programmable CMOS SLIC and CODEC family, including line-interface functionality, digital connectivity, supply conditions, and application guidance. Use the pin-description table and package drawing in that document when assigning PCB connections.
What are the key specifications of SI3210-GTR that engineers should know?
The SI3210-GTR is a one-channel SLIC/CODEC with a 3.3 V or 5 V supply, stated 60 dB line performance, 41 mA operating current, and PCM plus SPI connectivity. According to the manufacturer family datasheet, the SI3210 integrates battery generation into a programmable CMOS telephone-line interface. The device is supplied in a 38-pin TSSOP tape-and-reel configuration for surface-mount assembly.
Where to buy SI3210-GTR online?
The SI3210-GTR can be requested through XAIPART's Request a Quote form on this page. The form is the appropriate route for checking current availability, requested quantity, packaging, and delivery terms without relying on a stale marketplace listing. The target device is a 38-pin TSSOP, tape-and-reel part with a 3.3 V or 5 V supply and PCM/SPI connectivity.
What is the price of SI3210-GTR?
Current SI3210-GTR commercial terms are handled through XAIPART's Request a Quote form on this page. Because component pricing and stock can change with quantity and sourcing conditions, the form provides the relevant quote for the exact SI3210-GTR ordering code rather than publishing a static price that may no longer be current. The part is identified as a 38-pin TSSOP tape-and-reel device.
What is the lead time for SI3210-GTR?
Request the current SI3210-GTR lead time and minimum order quantity through XAIPART's Request a Quote form on this page. The required commercial information is quantity-dependent, so a firm delivery commitment should be tied to the exact order configuration and current component availability. The SI3210-GTR ordering code denotes the tape-and-reel form of the 38-pin TSSOP device.
Is SI3210-GTR in stock?
Current SI3210-GTR stock status should be confirmed through XAIPART's Request a Quote form on this page. The request can specify the quantity needed and the required 38-pin TSSOP tape-and-reel packaging. Manufacturer and distribution listings identify the SI3210-GTR as an active single-channel 3.3 V/5 V SLIC and CODEC, but lot-level availability can change quickly.
What can replace SI3210-GTR?
The closest drop-in family candidates are SI3210-GT, SI3210-FT, SI3210-KT, SI3211-GT, and SI3211-KT, all associated with the 38-pin TSSOP SLIC family. Their package pin count is unchanged at 38, but suffix and battery-function differences can change ordering, grade, or implementation details. Compare the manufacturer datasheets and existing firmware configuration before treating any candidate as an exact substitute.
Is SI3210-GTR the same as SI3210-GT?
The SI3210-GT is the closest same-family drop-in candidate, but the order codes are not simply interchangeable labels. Both devices are associated with the 38-pin TSSOP SI3210 family, whereas the GTR suffix specifically identifies the tape-and-reel ordering form. Verify the exact package, temperature grade, lead-finish or ordering suffix, battery function, and firmware requirements against the manufacturer datasheet before substitution.
SI3210-GTR vs SI3211-GT - which is better for an analog phone adapter?
Choose the SI3210-GTR when the design requires the SI3210 architecture's battery-generation function; choose the SI3211 variant when the external design uses battery selection instead. Both occupy the same 38-pin TSSOP family and support 3.3 V or 5 V operation, so the deciding factor is the line-support topology and firmware expectations rather than basic voltage compatibility.
When should I choose SI3210-GTR over SI3211-GT?
Choose SI3210-GTR when the subscriber line design needs on-chip battery generation or is already configured around the SI3210 family behavior. Choose the SI3211 family when the line circuit uses battery selection and its associated external circuitry has been validated. Both retain a 38-pin TSSOP footprint and 3.3 V/5 V supply class, but battery topology and control configuration remain application-specific.
Is SI3210-GTR suitable for voice-over-PoE gateways?
Yes, the SI3210-GTR is suitable for the analog line and voice-conversion section of a voice-over-PoE gateway when the design includes a compatible analog line network. Its single-channel SLIC and CODEC functions, 60 dB stated line performance, 3.3 V/5 V operation, and PCM/SPI connectivity support embedded control and digital voice transport.
Is SI3210-GT a pin-compatible replacement for SI3210-GTR?
The SI3210-GT is a pin-compatible 38-pin TSSOP family candidate, but it should be treated as a conditional drop-in replacement rather than an automatic substitute. The manufacturer ordering suffixes can encode differences in packaging or grade, and the Si3210/Si3211 family also differs in battery generation versus battery selection. Confirm those details and repeat board-level validation before production use.
What is the best equivalent manufacturer for SI3210-GTR?
No cross-manufacturer drop-in equivalent is established for the SI3210-GTR in the available substitution information. The documented alternatives are members of the same SLIC family, so engineers should evaluate the SI3210 and SI3211 suffix variants rather than assume that a different manufacturer's codec is pin-to-pin compatible. A new cross-brand design would require a full line-network, firmware, and pin-level review.
Where can I find the SI3210-GTR pinout?
Use the pin-description table and package drawing in the manufacturer SI3210/Si3211 family datasheet for authoritative SI3210-GTR pin assignments. The component uses a 38-pin TSSOP package with surface-mount land pattern and an exposed thermal-management requirement addressed through its PCB footprint. The manufacturer datasheet PDF linked on this page should be used rather than a distributor-generated pin diagram.

Data referensi kejuruteraan untuk SI3210-GTR — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the SI3210-GTR for a single-line analog telephone design that needs an integrated SLIC, voice CODEC, and battery-generation function, with host connectivity through PCM and SPI. Its 3.3 V or 5 V operation suits both lower-voltage embedded platforms and 5 V systems. The SI3210-GT is the closest same-family ordering candidate when the exact suffix and packaging requirements match an existing design. Consider SI3210-FT or SI3210-KT only after checking their grade and ordering details against the manufacturer datasheet. Use an SI3211 variant instead when the line network requires battery selection rather than generation; its shared 38-pin package enables PCB reuse, but firmware and external circuitry may need revision. No cross-manufacturer drop-in equivalent should be assumed without a complete pin, electrical, firmware, and line-network review.

Perbandingan dengan Gantian

Parametr Produk Ini SI3210-GT SI3210-FT SI3210-KT SI3211-GT SI3211-KT
Brand Skyworks Solutions Skyworks Solutions Skyworks Solutions Skyworks Solutions Skyworks Solutions Skyworks Solutions
Package 38-pin TSSOP 38-pin TSSOP - same 38-pin TSSOP - same 38-pin TSSOP - same 38-pin TSSOP - same 38-pin TSSOP - same
Product Type SLIC and voice CODEC Legacy SLIC SLIC and voice CODEC SLIC and voice CODEC SLIC and voice CODEC SLIC and voice CODEC
Battery Function Battery generation Battery generation Battery generation Battery generation Battery selection Battery selection
Digital Connectivity PCM and SPI PCM and SPI PCM and SPI PCM and SPI PCM and SPI PCM and SPI

Penyeberangsung Jelas

  • Integrated battery generation (vsSI3211-GT)
  • Single-channel integration (vsSI3211-KT)
  • Dual supply-voltage support (vsSI3210-GT)
  • PCM and SPI host connectivity (vsSI3210-FT)

Catatan Desain

Use the 38-pin TSSOP land pattern and exposed-pad geometry specified by the manufacturer package drawing. Place the device close to the subscriber-line network so that sensitive voice and battery nodes remain short, while routing PCM and SPI traces away from switching-regulator power paths. Maintain the recommended copper area beneath the thermal pad so junction heat can move into the PCB rather than concentrating around the fine-pitch leads.

The SLIC, codec, and battery functions share a sensitive analog telephone environment. Keep external line-network components close to the appropriate interface pins, provide a continuous ground reference beneath the analog section, and avoid routing the PCM clock and SPI signals alongside line and battery conductors. Validate ringing, off-hook, and voice distortion with the actual protection network because component placement can influence noise and impedance margins.

Design the 3.3 V or 5 V supply rail for the stated 41 mA operating current plus margin for digital load and transient behavior. Decoupling should follow the manufacturer application circuit, with local high-frequency bypass placed directly across the relevant supply pins. Keep the telephone-line battery network separate enough that ringing or off-hook transitions do not couple directly into sensitive codec supply nodes.

Do not select a suffix variant solely because it has the same 38-pin package. The SI3210 and SI3211 families differ in battery generation versus battery selection, and ordering suffixes can affect grade or packaging details. Verify pin assignments, supply limits, line-network topology, and the required register or firmware configuration against the manufacturer datasheet before releasing a replacement to production.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The device is a telecom interface IC rather than an automotive-qualified product. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation.

Data disahkan pada: 2026-11-16 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

si3210 datasheet silabs si3210 SI3210-GTR datasheet SI3210-GTR pinout SI3210-GTR datasheet pdf SI3210-GTR equivalent SI3210-GTR replacement SI3210-GTR cross reference SI3210-GTR vs SI3211-GT SI3210-GTR price SI3210-GTR stock SI3210 38-TSSOP application circuit

Komponen dan Tanda berkaitan

Skyworks Solutions Silicon Labs SI3210-GTR SI3210-GT SI3210-FT SI3210-KT SI3211-GT SI3211-KT ProSLIC Subscriber Line Interface Concept SLIC voice CODEC programmable CMOS PCM SPI battery generation battery selection 3.3 V 5 V 60 dB 41 mA 38-pin TSSOP surface mount telecom interface IC customer premise equipment
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ