Texas Instruments

SN74HC244N - 8-Channel 3-State Buffer | Texas Instruments

MPN: SN74HC244N ✓ Aktif
2 V to 6 V Vdss 20-pin PDIP Package
MOQ: 1 |

SN74HC244N Ringkasan

The Texas Instruments SN74HC244N is an eight-channel, non-inverting buffer and line driver with three-state outputs, a 2 V to 6 V supply range, and a 20-pin PDIP package. The device is divided into two four-bit sections, each with its own output-enable input, allowing two groups of four outputs to be placed independently into the high-impedance state. Its non-inverting inputs pass data directly to the corresponding outputs whenever the associated output-enable input is low.

A logic buffer is a digital semiconductor that strengthens or isolates signals traveling between circuit sections. A three-state buffer can present a logic 0, a logic 1, or a high-impedance output. This output-state control makes the SN74HC244N useful for shared buses because multiple drivers can share conductors when their output-enable signals are mutually exclusive. Within the broader hierarchy, it is a CMOS logic IC, a bus-interface buffer, a line driver, and a member of the 74HC family.

The SN74HC244N provides eight non-inverting channels, two independently controlled four-output groups, and operation from 2 V to 6 V. Its three-state outputs support bus-oriented receivers and transmitters, memory-address drivers, and clock drivers. Because the outputs can be disconnected electrically, the device helps prevent one driver from fighting another when several devices share a bus. The two-section organization also allows a designer to enable a four-bit group while holding the other group at high impedance.

The device uses positive-edge-triggered-style control conventions only in the sense that its output-enable inputs are level-sensitive; the enable state, rather than a data transition, determines whether outputs are active. The manufacturer describes the SNx4HC244 family as optimized for the performance and density of three-state memory-address drivers, clock drivers, and bus-oriented receivers and transmitters. The non-inverting architecture avoids changing the logical polarity of data passing through the device.

Typical applications include bidirectional-bus isolation, memory and peripheral address buffering, clock distribution, instrumentation interfaces, and control systems where several devices may connect to a shared conductor. The SN74HC244N is particularly useful when two four-bit output groups need independent enable control. Designers should still verify timing, output-drive capability, and system-specific fanout against the manufacturer datasheet for the operating condition being implemented.

A key design consideration is output-enable management. Only one driver should actively drive a shared net at a time; disabled outputs must remain at high impedance. Place the device close to the driven bus when trace length or propagation delay matters, and use a continuous ground plane with short supply connections. The 20-pin PDIP package also requires adequate through-hole spacing and assembly clearance from adjacent components.

This product page consolidates the manufacturer function description, package identification, technical specifications, drop-in alternatives, comparison points, and practical interface-design guidance into one engineering reference for evaluating the SN74HC244N in modern and legacy CMOS logic systems.

Pilihan pengganti yang segera untuk SN74HC244N — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

74HC244N

✅ Masuk Drop-In
📦 20-pin PDIP
Same 8-channel non-inverting 3-state function and 20-pin PDIP footprint; supply-range and timing differences are 0% for the documented 2 V to 6 V function.

📋 Alternatif rujukan (tidak dalam katalog)

MC74HC244N

✅ Masuk Drop-In
📦 20-pin PDIP
Same 8-channel non-inverting 3-state buffer function and 20-pin PDIP footprint; documented supply-range difference is 0% at 2 V to 6 V.

📋 Alternatif rujukan (tidak dalam katalog)

CD74HC244N

✅ Masuk Drop-In
📦 20-pin PDIP
Same 8-channel non-inverting 3-state buffer function and 20-pin PDIP footprint; documented supply-range difference is 0% at 2 V to 6 V.

📋 Alternatif rujukan (tidak dalam katalog)

74HC244N

✅ Masuk Drop-In
📦 20-pin PDIP
Same 8-channel non-inverting 3-state buffer function and 20-pin PDIP footprint; documented supply-range difference is 0% at 2 V to 6 V.

📋 Alternatif rujukan (tidak dalam katalog)

TC74HC244N

✅ Masuk Drop-In
📦 20-pin PDIP
Same 8-channel non-inverting 3-state buffer function and 20-pin PDIP footprint; documented supply-range difference is 0% at 2 V to 6 V.

📋 Alternatif rujukan (tidak dalam katalog)

SN74HC244N Penilaian maksimum & Ciri-ciri Elektrik

Logic Type Octal buffer and line driver
Number of Channels 8 channels
Number of Elements 2 elements
Bits per Element 4 bits per element
Jenis Output 3-state output
Signal Polarity Non-inverting
Output-enable Control 2 independent 4-output groups
Supply Voltage Range 2 V to 6 V
Logic Family 74HC CMOS
Package Type 20-pin PDIP
Total Pin Count 20 pins
Jenis Pemasangan Through-hole

Panduan Konfigurasi Pin SN74HC244N 20-pin pdip

Konfigurasi pin untuk SN74HC244N (20-pin pdip pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 20-pin pdip untuk SN74HC244N

Tiada data garisan pin yang diperoleh untuk SN74HC244N.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

SN74HC244N patut untuk 6 aplikasis: Shared-Bus Signal Isolation, Memory Address Buffering, Clock Signal Distribution, Instrumentation Interface, Industrial Control Backplane, Legacy Peripheral Bus Isolation.

🖥️

Shared-Bus Signal Isolation

The SN74HC244N fits shared-bus isolation because its eight non-inverting channels can drive four conductors per section and enter a high-impedance state when the associated output-enable input is high. This allows multiple buffer devices to share address or control lines without two active drivers continuously fighting each other. Texas Instruments identifies three-state memory-address and bus-oriented drivers as core applications. The 2 V to 6 V operating range supports both lower-voltage CMOS systems and conventional 5 V logic. The key design requirement is correct enable sequencing: only one driver should actively drive a given net at a time. Pull resistors may be added where the system requires a defined state during reset or when every driver is disabled.

🖥️

Memory Address Buffering

The SN74HC244N is appropriate for memory-address buffering because it provides eight non-inverting buffers with three-state outputs and two independently enabled four-bit groups. The two sections can connect address lines to different devices, buses, or operating regions while allowing unused outputs to remain disconnected. Its use of non-inverting paths preserves the logical address presented by the controlling circuit. For a design operating from 2 V to 6 V, timing must be checked against the actual supply voltage and load because propagation delay changes with operating conditions. Engineers should also compare the target memory's enable timing with the buffer's output-enable delay to prevent address overlap during transitions.

🖥️

Clock Signal Distribution

The SN74HC244N can distribute a clock to multiple destinations because each of its eight non-inverting channels provides a dedicated buffered output, while two output-enable groups can be controlled independently. The buffered paths reduce loading on the original clock source when the destination count and edge-rate requirements are suitable. Texas Instruments explicitly lists clock drivers among the intended uses of the SNx4HC244 family. Because the device includes three-state outputs, the clock can also be disconnected from selected destinations when bus contention or test modes require it. Validate propagation delay, output rise and fall time, and capacitive loading at the intended VCC before treating the buffer as transparent to every clock edge.

🔧

Instrumentation Interface

The SN74HC244N is useful in instrumentation and control interfaces where multiple digital lines must reach a connector, isolated circuit section, or acquisition module without excessive source loading. Eight non-inverting channels provide a convenient one-to-one signal path, and the two four-bit output-enable groups allow a diagnostic or maintenance bus segment to be disconnected under software control. Operation across 2 V to 6 V supports integration with both legacy 5 V logic and modern low-voltage CMOS interface rails. For sensitive measurement equipment, confirm noise, timing, and leakage characteristics in the manufacturer datasheet at the selected supply voltage, and use controlled grounding to prevent output switching from disturbing nearby analog circuitry.

🏭

Industrial Control Backplane

The SN74HC244N can support industrial control backplanes that distribute command, address, or interlock signals among several circuit cards. Its three-state outputs allow a card or bus segment to be electrically detached, while separate four-output enable groups simplify partial bus isolation. The non-inverting behavior avoids adding logic inversion to the system architecture, and the 20-pin PDIP package is suitable for through-hole industrial assemblies where manual maintenance and socketed prototyping remain common. In a deployed system, choose pull-up or pull-down values for disabled outputs, maintain a continuous ground plane, and verify timing at the highest voltage and temperature planned for the equipment.

🔧

Legacy Peripheral Bus Isolation

The SN74HC244N is well suited to isolating a legacy peripheral bus from a newer controller while preserving standard CMOS logic polarity. Eight channels can buffer read, write, address, or control signals, and each four-channel section can be disabled without removing all peripheral connections. This capability supports board redesigns, test fixtures, and systems that combine older peripheral ICs with newer control electronics. The designer must ensure that disabled outputs do not introduce a contention path, that every receiver interprets the high-impedance interval correctly, and that propagation delay does not violate setup and hold requirements. For a direct cross-manufacturer replacement, verify the package, pinout, supply range, timing, and output-drive capability rather than relying on the 74HC244 function name alone.

What is the SN74HC244N datasheet PDF?
The official Texas Instruments SN74HC244 datasheet PDF is available at https://www.ti.com/lit/ds/symlink/sn74hc244.pdf. It documents the octal non-inverting buffer and line driver with three-state outputs, including the 2 V to 6 V operating range, two four-bit sections, electrical characteristics, and package information. Use the manufacturer document for authoritative pin descriptions, timing limits, absolute maximum ratings, and recommended operating conditions.
What is the SN74HC244N used for?
The SN74HC244N is used to drive or isolate eight digital signals while providing a high-impedance output state. According to the Texas Instruments datasheet, the family is designed for three-state memory-address drivers, clock drivers, and bus-oriented receivers and transmitters. Its two independent four-output groups allow two four-bit bus segments to be enabled separately, which is useful when multiple devices share conductors.
What are the key specifications of SN74HC244N that engineers should know?
The SN74HC244N is an eight-channel, non-inverting, three-state logic buffer operating from 2 V to 6 V. Texas Instruments describes the device as two four-bit buffer sections with separate output-enable inputs, all housed in a 20-pin PDIP package. These are the principal facts to check when determining whether the part fits a shared-bus, clock-driver, address-driver, or general interface-design requirement.
How many output-enable inputs does the SN74HC244N have?
The SN74HC244N has two output-enable inputs, one for each four-bit section. According to the Texas Instruments datasheet, when the associated output-enable input is low, the corresponding non-inverting data inputs pass through to the outputs; when it is high, those four outputs enter the high-impedance state. The two sections can therefore be enabled independently.
Where can I find the SN74HC244N pinout?
The SN74HC244N pinout is documented in the pin-configuration section of the official Texas Instruments SN74HC244 datasheet. The device uses a 20-pin PDIP package and contains eight data inputs, eight corresponding outputs, two output-enable controls, power, and ground. Use the manufacturer pin-description table when assigning PCB nets rather than inferring connections from channel grouping alone.
Is SN74HC244N the same as 74HC244N?
SN74HC244N and 74HC244N normally identify the same octal three-state buffer function, but the full suffix also identifies manufacturer-specific ordering and package information. The verified Texas Instruments orderable part is the SN74HC244N in a 20-pin PDIP package. Confirm the manufacturer's ordering table, electrical limits, temperature grade, and package suffix before treating another manufacturer's 74HC244N as a production drop-in replacement.
Can 74HC244N replace SN74HC244N?
A 74HC244N can replace SN74HC244N only when it uses the same 20-pin PDIP footprint, implements the same eight-channel non-inverting three-state function, provides two four-output enable groups, and meets the original circuit's voltage, timing, and output-drive requirements. The NXP 74HC244N is a relevant cross-reference candidate, but production substitution should be confirmed against both manufacturers' pin and electrical tables.
What is the best drop-in replacement for SN74HC244N?
The NXP 74HC244N is the clearest drop-in candidate identified by the cross-reference information because it provides the same 74HC244 octal-buffer function in a compatible through-hole package. Final approval should compare pin names, supply range, propagation delay, output current, and power-off behavior. Use the Request a Quote form on this page for current sourcing of the exact Texas Instruments MPN.
SN74HC244N vs NXP 74HC244N: which is better for a legacy bus interface?
SN74HC244N and NXP 74HC244N are functionally close choices for a legacy 74HC bus interface, but neither should be selected from function alone. Compare the 2 V to 6 V supply requirement, timing at the actual VCC, output drive, input leakage, and temperature grade for the target application. The NXP part is most useful as a board-level replacement when its 20-pin PDIP pinout and electrical characteristics are verified against the Texas Instruments datasheet.
When should I choose SN74HC244N over another 74HC244 replacement?
Choose SN74HC244N when the design specifically calls for the Texas Instruments orderable 20-pin PDIP implementation and its documented electrical characteristics support the bus timing and loading. Choose a competing 74HC244N only when second sourcing, availability, temperature grade, or a documented product change justifies a cross-manufacturer comparison. A footprint match alone does not prove equivalent timing or output-drive performance.
Is SN74HC244N suitable for clock and address buffering?
Yes, the SN74HC244N is explicitly identified by Texas Instruments for clock drivers and three-state memory-address drivers. Its non-inverting channels preserve logical data polarity, while the three-state outputs permit controlled connection to shared buses. Suitability still depends on the propagation delay and output transition limits at the actual supply voltage, load capacitance, and operating temperature.
Where can I buy SN74HC244N online?
Use the Request a Quote form on this page to request the exact Texas Instruments SN74HC244N and obtain a current quotation, stock position, minimum order quantity, and lead time. For a production purchase, specify the 20-pin PDIP package and the exact MPN SN74HC244N so that the quotation is not confused with surface-mount or differently suffixed members of the 74HC244 family.
What is the price of SN74HC244N?
The current commercial price for SN74HC244N is obtained through the Request a Quote form on this page. The form is the appropriate route for an exact-MPN quotation because market pricing, quantity, and lead time can change. Include the required order quantity and 20-pin PDIP packaging information when requesting the quotation for engineering or production planning.
What is the lead time for SN74HC244N?
Request the current lead time through the Request a Quote form on this page. Lead time depends on the requested quantity, the exact Texas Instruments MPN, the 20-pin PDIP package, and current factory and distribution status. For safety stock or production scheduling, request a committed lead time rather than relying on an unverified historical availability statement.
How should output-enable pins be controlled in an SN74HC244N design?
Control each SN74HC244N output-enable input so only one driver actively controls a shared net at a time. According to the Texas Instruments datasheet, the associated four outputs pass non-inverting data when the enable input is low and become high impedance when it is high. Add suitable pull-up or pull-down resistors where a defined disabled state is required by the system interface.

Data referensi kejuruteraan untuk SN74HC244N — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose SN74HC244N when the system needs an eight-channel, non-inverting, three-state buffer in a 20-pin PDIP package and the Texas Instruments documentation provides the required production assurance. It is well matched to shared address buses, clock distribution, and control interfaces where two groups of four outputs must be enabled independently. The NXP 74HC244N is a relevant second-source option for a board that already combines devices from that manufacturer, but verify its electrical timing and pin configuration. The onsemi MC74HC244N and Renesas CD74HC244N can also be evaluated when their sourcing or qualification documentation is preferable. Do not select a competitor solely because its package is called PDIP; compare propagation delay, output drive, input leakage, temperature range, and enable timing at the actual operating voltage. For an existing PCB, treat every 74HC244N candidate as a drop-in candidate only after checking the complete manufacturer pin and electrical tables.

Perbandingan dengan Gantian

Parametr Produk Ini 74HC244N MC74HC244N CD74HC244N 74HC244N TC74HC244N
Brand Texas Instruments NXP onsemi Renesas Electronics Nexperia Toshiba
Package 20-pin PDIP 20-pin PDIP 20-pin PDIP 20-pin PDIP 20-pin PDIP 20-pin PDIP
Function Octal non-inverting buffer and line driver Octal non-inverting buffer and line driver Octal non-inverting buffer and line driver Octal non-inverting buffer and line driver Octal non-inverting buffer and line driver Octal non-inverting buffer and line driver
Number of Channels 8 channels 8 channels 8 channels 8 channels 8 channels 8 channels
Output Type 3-state output 3-state output 3-state output 3-state output 3-state output 3-state output
Signal Polarity Non-inverting Non-inverting Non-inverting Non-inverting Non-inverting Non-inverting
Supply Voltage Range 2 V to 6 V 2 V to 6 V 2 V to 6 V 2 V to 6 V 2 V to 6 V 2 V to 6 V
Output-enable Organization Two independent 4-output groups Two independent 4-output groups Two independent 4-output groups Two independent 4-output groups Two independent 4-output groups Two independent 4-output groups

Penyeberangsung Jelas

  • Two independently controllable four-output groups (vsNXP 74HC244N)
  • Exact 20-pin PDIP orderable configuration (vsonsemi MC74HC244N)
  • Broad 2 V to 6 V CMOS operating range (vsRenesas Electronics CD74HC244N)

Catatan Desain

Do not permit two active drivers to control the same bus conductor simultaneously. The SN74HC244N has two output-enable groups, each covering four outputs, so derive each enable from the same arbitration logic that grants bus ownership. Include defined pull-up or pull-down states where receivers must not see a floating input while all buffers are disabled. Review the complete enable and data sequence for overlap at power-up, reset, and mode changes.

Check propagation delay, output transition time, and capacitive-load limits at the actual supply voltage rather than relying on a single headline value. The 2 V to 6 V range allows operation across multiple CMOS voltage domains, but timing changes with VCC. For longer traces or fast clock distribution, place the buffer close to the source or receiver, minimize stub lengths, and maintain a continuous return path to reduce ringing and crosstalk.

Route supply and ground connections directly to the IC with short, low-impedance traces. Because the SN74HC244N is a 20-pin PDIP, preserve adequate through-hole spacing for connector leads, wave-solder fixtures, and rework tools. Place any bus pull resistors close to the receivers so that disabled outputs and unconnected lines settle quickly. Keep unrelated switching nodes away from clock and address outputs to avoid coupling into the buffered signals.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was included in the manufacturer product-page result. Automotive qualification is not applicable to the standard SN74HC244N orderable MPN.

Pencarian Berhubungan

sn74hc244n datasheet sn74hc244n datasheet pdf SN74HC244N pinout SN74HC244N 20-pin PDIP SN74HC244N 3-state buffer SN74HC244N 2V to 6V SN74HC244N equivalent SN74HC244N replacement SN74HC244N drop-in replacement SN74HC244N vs 74HC244N Texas Instruments SN74HC244N SN74HC244N price SN74HC244N stock SN74HC244N address driver SN74HC244N clock driver

Komponen dan Tanda berkaitan

Texas Instruments SN74HC244N SN74HC244 NXP 74HC244N onsemi MC74HC244N Renesas Electronics CD74HC244N Nexperia Toshiba TC74HC244N 74HC CMOS logic buffer line driver three-state output high-impedance output non-inverting buffer bus buffer memory address driver clock driver output enable 20-pin PDIP through-hole package 2 V to 6 V supply
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ