STMicroelectronics

STM32F031C4T6 - 48MHz Cortex-M0 MCU, 16KB Flash | STMicroelectronics

MPN: STM32F031C4T6 ✓ Aktif
2.0 V to 3.6 V Vdss 48-pin LQFP Package 48 MHz Speed 16 KB Memory
MOQ: 1 |

STM32F031C4T6 Ringkasan

The STMicroelectronics STM32F031C4T6 is an entry-level 32-bit ARM Cortex-M0 microcontroller operating at up to 48 MHz, with 16 KB of Flash memory, 4 KB of SRAM, and a 48-pin LQFP package. Its operating voltage is 2.0 V to 3.6 V, making it suitable for compact embedded products operating from a 3.3 V rail. The device integrates an ADC, nine timers, and communication interfaces for cost-sensitive control and monitoring designs.

A microcontroller is a programmable semiconductor that combines a processor core, memory, peripherals, and communication ports on one integrated circuit. Within the embedded-control hierarchy, the STM32F031 belongs to the ARM Cortex-M0 microcontroller family and operates as a system-on-chip containing a real-time processor core, embedded Flash, SRAM, timers, serial interfaces, analog conversion, and clock-control circuitry. This integration reduces board area, component count, and system complexity for small control systems.

The Cortex-M0 architecture provides a 32-bit processing path while avoiding the larger memory and logic requirements of more complex Cortex-M processor cores. At a maximum 48 MHz, the STM32F031C4T6 is appropriate for motor-control peripherals, simple user interfaces, sensor acquisition, communication bridges, and accessory controllers. Its 16 KB Flash supports embedded firmware and boot code, while 4 KB of SRAM provides working memory for moderate control loops.

The STM32F0 family integrates an ADC, communication interfaces, and nine timers according to the manufacturer documentation. These resources allow firmware to combine sensor reading, timing, serial communication, and actuator control on a single device. This integration can reduce the need for external converters, communication transceivers, or dedicated timing components in compact consumer, industrial, and equipment-control products.

Typical uses include small motor controllers, building-access peripherals, battery-powered instruments, LED-control modules, industrial sensing nodes, and low-cost communication equipment. A 3.3 V supply architecture simplifies power design, while the 48-pin LQFP package provides enough pins for external interfaces without requiring a fine-pitch BGA assembly process.

PCB design should preserve clean grounding around power and analog pins, follow the manufacturer’s decoupling recommendations, and route sensitive ADC inputs away from fast-switching nodes. Firmware reuse between STM32F0 devices should be checked against each part’s pin assignment, peripheral mix, clock configuration, and low-power behavior. The package drawing and pin-description table in the manufacturer datasheet should be used as the authority for final land patterns and track assignments.

This product page combines the verified device specifications, package information, application guidance, and documented cross-reference information to support component selection, PCB planning, firmware evaluation, and sourcing. It also distinguishes electrically close alternatives from a confirmed drop-in replacement, helping engineers assess migration risk before changing a production design.

Pilihan pengganti yang segera untuk STM32F031C4T6 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera STM32F031C4T6 (sama faktor bentuk dan kaki) — berbeza dalam Architecture, Flash Memory, Maximum CPU Frequency, Package, Product Type.

STMicroelectronics
Architecture: 32-bit RISC
Flash Memory: 16 KB (16K x 8)
Maximum CPU Frequency: 32 MHz
Bandingkan Dengan STM32F031C4T6 →

STM32F030C4T6

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 48-pin LQFP
Related STM32F0 device at 48 MHz; Flash capacity and peripheral mix differ by up to 30%, so ADC, timer, and pin assignments require verification

📋 Alternatif rujukan (tidak dalam katalog)

STM32F050C4T6TR

✅ Masuk Drop-In
📦 48-pin LQFP
Related STM32F0 architecture with up to 20% memory variation and different peripheral emphasis; pin assignments must be checked before replacement

📋 Alternatif rujukan (tidak dalam katalog)

STM32F031K4T6

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 48-pin LQFP
Same STM32F031 family and 48 MHz class, but reduced package and potentially different Flash capacity within 30%; verify exact pin compatibility

📋 Alternatif rujukan (tidak dalam katalog)

HK32F031C4T6

✅ Masuk Drop-In
📦 48-pin LQFP
Same stated pinout with claimed hardware and software compatibility, but ADC, clock, and low-power behavior require qualification

📋 Alternatif rujukan (tidak dalam katalog)

STM32F031C4T6 Penilaian maksimum & Ciri-ciri Elektrik

Product Type 32-bit ARM Cortex-M0 microcontroller
Processor Core ARM Cortex-M0
Maximum CPU Frequency 48 MHz
Flash Memory 16 KB
Flash Organization 16K x 8 bits
SRAM 4 KB
Operating Voltage Range 2.0 V to 3.6 V
ADC Integrated 12-bit ADC
Timer Count 9 timers
Communication Interfaces SPI, I2C, and UART
Architecture ARM-based 32-bit RISC
Kemasan 48-pin LQFP
Jenis Pemasangan Surface mount
Packaging Form Tray

Panduan Konfigurasi Pin STM32F031C4T6 48-pin lqfp

Konfigurasi pin untuk STM32F031C4T6 (48-pin lqfp pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 48-pin lqfp untuk STM32F031C4T6

Tiada data garisan pin yang diperoleh untuk STM32F031C4T6.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

STM32F031C4T6 patut untuk 6 aplikasis: Small Motor Controller, Industrial Sensor Node, LED Lighting Controller, Battery-Powered Instrument, Communication Bridge, Building Access Peripheral.

🏭

Small Motor Controller

The STM32F031C4T6 fits compact motor-control auxiliaries because its 48 MHz ARM Cortex-M0 core can execute position, speed, and duty-cycle algorithms while nine timers provide timing resources. The integrated ADC can sample current, position, or temperature inputs without requiring a separate converter. Use the MCU beside a suitable power stage, with its 2.0 V to 3.6 V range supporting 3.3 V logic. The principal design consideration is timer and pin allocation: confirm that the required PWM outputs, comparator inputs, and protection signals are available on the selected 48-pin assignment. Firmware should also include safe disable behavior during overcurrent or invalid-sensor conditions.

🧩

Industrial Sensor Node

The STM32F031C4T6 is appropriate for a compact 3.3 V industrial sensor node that must acquire an analog measurement and transmit it over a local serial link. Its 48 MHz Cortex-M0 core provides enough performance for sampling, filtering, diagnostics, and communication, while 16 KB of Flash holds compact firmware and 4 KB of SRAM supports short working buffers. The ADC simplifies analog front-end integration. Use the manufacturer pin and peripheral tables to assign the sensor input and UART or SPI signals, and validate the low-power behavior if the node is battery powered.

💡

LED Lighting Controller

The STM32F031C4T6 can control compact LED lighting modules because its nine timers and 48 MHz processing core support PWM generation, fade sequencing, and fault handling. The integrated ADC may monitor a divider or thermistor, while serial interfaces can accept configuration commands from a host controller. The 3.3 V operating range aligns with many LED driver control sections. Engineers should size the local bypass network according to the manufacturer recommendation, keep LED-current paths away from ADC traces, and program a defined shutdown state so an MCU reset does not leave the lighting output in an unintended condition.

🔧

Battery-Powered Instrument

The STM32F031C4T6 suits compact battery-powered instruments where energy efficiency and mixed analog and digital control are important. Its 48 MHz Cortex-M0 core can perform control calculations while the integrated ADC handles sensor acquisition and the communication peripherals move measurement data to a host. The 16 KB Flash limit favors compact, event-driven firmware rather than large local data storage. Exact low-power modes and wake sources must be confirmed in the manufacturer documentation, and the power architecture should prevent sensor or transceiver current from overwhelming the MCU supply budget.

🌐

Communication Bridge

The STM32F031C4T6 works as a protocol-conversion or isolated communication bridge when a system must move data between SPI, I2C, and UART devices. Its 48 MHz core handles framing and buffering, while 4 KB of SRAM accommodates small protocol state and transmit or receive queues. The 48-pin LQFP package offers more external connections than smaller MCU packages, which can simplify assignment of multiple serial functions. Firmware should use bounded buffers and explicit timeout handling, while PCB layout should separate transceiver or connector routing from the ADC and clock paths.

🏢

Building Access Peripheral

The STM32F031C4T6 is suitable for a compact access-control peripheral such as a keypad controller, door interface, or credential-reader node. The device can scan digital inputs, drive indicator or lock-control signals, and communicate with a higher-level controller through a serial interface. Its 48 MHz Cortex-M0 performance is more than adequate for event handling and debounce routines, while the 3.3 V operating range simplifies integration with common door-control electronics. Validate electrical levels at every external connector and implement safe lock-release behavior in firmware rather than relying only on hardware defaults.

What is the operating voltage of STM32F031C4T6?
The STM32F031C4T6 operates from 2.0 V to 3.6 V. According to the STMicroelectronics device documentation, it is an ARM-based 32-bit microcontroller with a 48 MHz maximum clock, 16 KB of Flash, and communication interfaces. A 3.3 V supply is therefore a natural operating point, while the 2.0 V minimum should be respected during power sequencing and low-voltage operation.
How much Flash and SRAM does STM32F031C4T6 have?
The STM32F031C4T6 provides 16 KB of Flash memory and 4 KB of SRAM. STMicroelectronics describes the Flash organization as 16K x 8 bits, and the part is based on the 32-bit ARM Cortex-M0 architecture. These capacities suit compact embedded applications with moderate firmware, boot code, communication routines, and real-time control logic.
What is the maximum clock frequency of STM32F031C4T6?
The STM32F031C4T6 has a maximum CPU frequency of 48 MHz. The 48 MHz Cortex-M0 core gives embedded firmware substantially more processing capability than the original Cortex-M0 entry-level devices while retaining a compact architecture and low-cost design profile. Clock setup and peripheral timing should follow the manufacturer clock-tree and timing configuration guidance.
Where can I download the STM32F031C4T6 datasheet PDF?
The STM32F031C4T6 datasheet and device documentation can be accessed through the STMicroelectronics product page and the linked technical-document archive. The manufacturer datasheet is the authoritative source for the LQFP-48 pin-description table, memory map, electrical characteristics, clock configuration, and recommended application circuits.
Where can I find the STM32F031C4T6 pinout?
The STM32F031C4T6 pinout is shown in the pin-description table and package drawing in the manufacturer datasheet. This 48-pin LQFP device includes power, ground, reset, clock, boot, programming, analog, and GPIO assignments. Use the manufacturer pin table to assign tracks because alternate-function mappings and peripheral signals must be checked for the specific board design.
Is STM32F031C4T6 suitable for 3.3 V embedded control systems?
Yes, the STM32F031C4T6 is suitable for 3.3 V embedded control systems because its documented operating range includes 2.0 V to 3.6 V. Its 48 MHz Cortex-M0 core, 16 KB Flash, 4 KB SRAM, integrated ADC, nine timers, and serial interfaces can handle compact sensing, timing, and communication tasks without requiring a separate processor.
Where can I buy STM32F031C4T6 online?
Use the Request a Quote form on this page to request STM32F031C4T6 availability, current pricing, and order quantity. The quote team can confirm the exact LQFP-48 tray ordering code, manufacturing status, and current lead time for your project before you place a purchase order.
What is the price of STM32F031C4T6?
Current STM32F031C4T6 pricing is shown through the Request a Quote form on this page. Submit the required quantity and packaging details to receive a current quotation for the exact STM32F031C4T6 ordering code, including confirmation of stock, lead time, and any volume pricing.
What is the lead time for STM32F031C4T6?
Request the current STM32F031C4T6 lead time through the Request a Quote form on this page. Lead time can depend on order quantity, package format, and current manufacturing conditions, so the quotation should state the requested quantity and whether the parts will be supplied in the manufacturer tray configuration.
Is STM32F031C4T6 in stock?
Submit an inquiry through the Request a Quote form on this page to check current STM32F031C4T6 availability. The request should identify the quantity required and the desired delivery schedule so the supply team can confirm an appropriate allocation and lead time.
STM32F031C4T6 vs STM32F050C4T6TR - which is better for a low-cost control design?
The STM32F031C4T6 is the better choice when its documented 48 MHz Cortex-M0 core, 16 KB Flash, 4 KB SRAM, ADC, nine timers, and serial interfaces match the design. STM32F050C4T6TR offers a related STM32F0 feature set, but its exact pin, memory, and peripheral differences must be checked before substitution. Compare the manufacturer pin and peripheral tables rather than relying on family similarity alone.
What is the difference between STM32F031C4T6 and STM32F030C4T6?
Both devices belong to the STM32F0 family and can provide a similar 48 MHz ARM Cortex-M0 control platform. Their peripheral selections, pin assignments, and exact memory configurations must be compared with the manufacturer documentation. For a production migration, verify ADC channels, timers, communication pins, clock options, low-power behavior, and package orientation before treating one as a replacement.
When should I choose STM32F031C4T6 over an alternative MCU?
Choose the STM32F031C4T6 when the design needs a 48 MHz 32-bit Cortex-M0 core, 16 KB Flash, 4 KB SRAM, an integrated ADC, nine timers, and established STM32F0 software support. It is a strong fit for compact 2.0 V to 3.6 V control products when avoiding a software-porting project is more important than sourcing a different MCU architecture.
What can replace STM32F031C4T6?
HK32F031C4T6 is a documented cross-brand candidate with the same stated pinout and claimed hardware and software compatibility. However, documented differences involving ADC, clock, and low-power behavior still require application-specific testing. The documented 48-pin alternatives in the STM32F0 family can also serve as migration candidates when their pin and peripheral differences are validated.
What is the best HK32F031C4T6 equivalent for STM32F031C4T6?
HK32F031C4T6 is the closest documented cross-brand equivalent identified for the STM32F031C4T6 because the cross-reference information states that it uses the same pinout. Compatibility still requires checking ADC behavior, clock configuration, low-power operation, firmware startup, interrupt mapping, and peripheral behavior. Treat it as a qualified second-source project rather than an automatic production substitution.
What are the key specifications of STM32F031C4T6 that engineers should know?
The STM32F031C4T6 combines a 32-bit ARM Cortex-M0 core, 48 MHz maximum clock, 16 KB Flash, 4 KB SRAM, a 2.0 V to 3.6 V operating range, an integrated ADC, nine timers, and communication interfaces in a 48-pin LQFP package. These specifications position it for compact, cost-sensitive embedded control systems operating mainly from a 3.3 V rail.

Data referensi kejuruteraan untuk STM32F031C4T6 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the STM32F031C4T6 when the design requires a 48 MHz ARM Cortex-M0 controller with 16 KB Flash, 4 KB SRAM, an integrated ADC, nine timers, and communication interfaces in a 48-pin LQFP package. It is especially suitable for compact 3.3 V control, sensor, LED, access-control, and communication-bridge products. Consider an STM32F030C4T6 or STM32F050C4T6TR only after checking the exact memory, pin, and peripheral differences against the manufacturer documentation. HK32F031C4T6 is the documented cross-brand candidate with the same stated pinout and claimed compatibility, but it requires qualification for ADC, clock, low-power, startup, and firmware behavior. For a new design with an established STM32F0 toolchain and minimal migration risk, the STM32F031C4T6 remains the clearest choice.

Perbandingan dengan Gantian

Parametr Produk Ini STM32F030C4T6 STM32F050C4T6TR STM32F031K4T6 HK32F031C4T6
Package 48-pin LQFP 48-pin LQFP 48-pin LQFP 48-pin LQFP 48-pin LQFP
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics HK32

Penyeberangsung Jelas

  • Provides the documented combination of 48 MHz performance, 16 KB Flash, and 4 KB SRAM (vsSTM32F030C4T6)
  • Uses the established STMicroelectronics STM32F0 software and peripheral platform (vsHK32F031C4T6)
  • Offers nine documented timers for compact timing and PWM workloads (vsSTM32F050C4T6TR)

Catatan Desain

Design the supply for the full 2.0 V to 3.6 V operating range, including startup and transient conditions at the 48 MHz maximum clock. Place the manufacturer-recommended decoupling capacitors adjacent to the corresponding VDD and VSS pins, and verify the power source can support the configured peripherals without causing brownout resets. For a 3.3 V system, ensure every connected peripheral uses compatible signal levels rather than relying on 5 V-tolerant assumptions that are not documented for this device.

Use the manufacturer package drawing and pin-description table when creating the LQFP-48 land pattern. Keep the exposed signal paths away from antenna keepouts when the controller is placed near an RF module, and provide adequate board-edge clearance for the fine-pitch leads. Confirm the pin-1 orientation against the PCB assembly drawing; unlike a reel-code change, a package orientation error can prevent the MCU from operating or programming correctly.

Route analog inputs from the sensor toward the ADC pins without long parallel runs beneath switching nodes. If the design uses a switching supply or power MOSFET, keep high-current paths away from the ADC reference and ground area, and use a quiet ground path where the board topology permits. Check the ADC source impedance and acquisition time against the configured clock to avoid incomplete conversions or excessive conversion-cycle overhead.

Do not treat a family member with a similar order code as an automatic replacement. Verify the complete pin assignment, alternate-function availability, ADC channels, timer outputs, communication instances, clock pins, boot configuration, and reset behavior. For HK32F031C4T6, add ADC accuracy, clock, low-power, startup, and firmware tests because the cross-reference information identifies behavior differences that may not appear in the package drawing.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for the exact ordering code. Confirm compliance with the current STMicroelectronics product documentation before production release.

Data disahkan pada: 2026-11-19 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

STM32F031C4T6 STM32F031C4T6 datasheet STM32F031C4T6 datasheet pdf STM32F031C4T6 pinout STM32F031C4T6 schematic STM32F031C4T6 equivalent STM32F031C4T6 replacement STM32F031C4T6 cross reference STM32F031C4T6 price STM32F031C4T6 stock STMicroelectronics STM32F031C4T6 STM32F031C4T6 48MHz Cortex-M0 STM32F031C4T6 16KB Flash STM32F031C4T6 LQFP-48 pinout STM32F031C4T6 vs HK32F031C4T6

Komponen dan Tanda berkaitan

STMicroelectronics STM32F031C4T6 STM32F030C4T6 STM32F050C4T6TR STM32F031K4T6 HK32F031C4T6 ARM Cortex-M0 32-bit microcontroller embedded microcontroller system-on-chip semiconductor 16 KB Flash memory 4 KB SRAM 48 MHz 2.0 V to 3.6 V 12-bit ADC nine timers SPI I2C UART 48-pin LQFP SMD package industrial sensor node motor controller LED lighting controller
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ