STM32F031C4T6 - 48MHz Cortex-M0 MCU, 16KB Flash | STMicroelectronics
Артикул: STM32F031C4T6 ✓ АктивенSTM32F031C4T6 Обзор
A microcontroller is a programmable semiconductor that combines a processor core, memory, peripherals, and communication ports on one integrated circuit. Within the embedded-control hierarchy, the STM32F031 belongs to the ARM Cortex-M0 microcontroller family and operates as a system-on-chip containing a real-time processor core, embedded Flash, SRAM, timers, serial interfaces, analog conversion, and clock-control circuitry. This integration reduces board area, component count, and system complexity for small control systems.
The Cortex-M0 architecture provides a 32-bit processing path while avoiding the larger memory and logic requirements of more complex Cortex-M processor cores. At a maximum 48 MHz, the STM32F031C4T6 is appropriate for motor-control peripherals, simple user interfaces, sensor acquisition, communication bridges, and accessory controllers. Its 16 KB Flash supports embedded firmware and boot code, while 4 KB of SRAM provides working memory for moderate control loops.
The STM32F0 family integrates an ADC, communication interfaces, and nine timers according to the manufacturer documentation. These resources allow firmware to combine sensor reading, timing, serial communication, and actuator control on a single device. This integration can reduce the need for external converters, communication transceivers, or dedicated timing components in compact consumer, industrial, and equipment-control products.
Typical uses include small motor controllers, building-access peripherals, battery-powered instruments, LED-control modules, industrial sensing nodes, and low-cost communication equipment. A 3.3 V supply architecture simplifies power design, while the 48-pin LQFP package provides enough pins for external interfaces without requiring a fine-pitch BGA assembly process.
PCB design should preserve clean grounding around power and analog pins, follow the manufacturer’s decoupling recommendations, and route sensitive ADC inputs away from fast-switching nodes. Firmware reuse between STM32F0 devices should be checked against each part’s pin assignment, peripheral mix, clock configuration, and low-power behavior. The package drawing and pin-description table in the manufacturer datasheet should be used as the authority for final land patterns and track assignments.
This product page combines the verified device specifications, package information, application guidance, and documented cross-reference information to support component selection, PCB planning, firmware evaluation, and sourcing. It also distinguishes electrically close alternatives from a confirmed drop-in replacement, helping engineers assess migration risk before changing a production design.
Аналоги без доработки для STM32F031C4T6 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с STM32F031C4T6 (тот же форм-фактор и посадочное место) — отличается по Architecture, Flash Memory, Maximum CPU Frequency, Package, Product Type.
STM32F030C4T6
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
STM32F050C4T6TR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
STM32F031K4T6
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
HK32F031C4T6
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
STM32F031C4T6 Максимальные параметры и электрические характеристики
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| Processor Core | ARM Cortex-M0 |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 16 KB |
| Flash Organization | 16K x 8 bits |
| SRAM | 4 KB |
| Operating Voltage Range | 2.0 V to 3.6 V |
| ADC | Integrated 12-bit ADC |
| Timer Count | 9 timers |
| Communication Interfaces | SPI, I2C, and UART |
| Architecture | ARM-based 32-bit RISC |
| Корпус | 48-pin LQFP |
| Тип монтажа | Surface mount |
| Packaging Form | Tray |
Руководство по цоколевке STM32F031C4T6 в корпусе 48-pin lqfp
Цоколевка для STM32F031C4T6 (корпус 48-pin lqfp). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для STM32F031C4T6.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
STM32F031C4T6 подходит для 6 применениеs: Small Motor Controller, Industrial Sensor Node, LED Lighting Controller, Battery-Powered Instrument, Communication Bridge, Building Access Peripheral.
Small Motor Controller
The STM32F031C4T6 fits compact motor-control auxiliaries because its 48 MHz ARM Cortex-M0 core can execute position, speed, and duty-cycle algorithms while nine timers provide timing resources. The integrated ADC can sample current, position, or temperature inputs without requiring a separate converter. Use the MCU beside a suitable power stage, with its 2.0 V to 3.6 V range supporting 3.3 V logic. The principal design consideration is timer and pin allocation: confirm that the required PWM outputs, comparator inputs, and protection signals are available on the selected 48-pin assignment. Firmware should also include safe disable behavior during overcurrent or invalid-sensor conditions.
Рекомендуется
Industrial Sensor Node
The STM32F031C4T6 is appropriate for a compact 3.3 V industrial sensor node that must acquire an analog measurement and transmit it over a local serial link. Its 48 MHz Cortex-M0 core provides enough performance for sampling, filtering, diagnostics, and communication, while 16 KB of Flash holds compact firmware and 4 KB of SRAM supports short working buffers. The ADC simplifies analog front-end integration. Use the manufacturer pin and peripheral tables to assign the sensor input and UART or SPI signals, and validate the low-power behavior if the node is battery powered.
Рекомендуется
LED Lighting Controller
The STM32F031C4T6 can control compact LED lighting modules because its nine timers and 48 MHz processing core support PWM generation, fade sequencing, and fault handling. The integrated ADC may monitor a divider or thermistor, while serial interfaces can accept configuration commands from a host controller. The 3.3 V operating range aligns with many LED driver control sections. Engineers should size the local bypass network according to the manufacturer recommendation, keep LED-current paths away from ADC traces, and program a defined shutdown state so an MCU reset does not leave the lighting output in an unintended condition.
Рекомендуется
Battery-Powered Instrument
The STM32F031C4T6 suits compact battery-powered instruments where energy efficiency and mixed analog and digital control are important. Its 48 MHz Cortex-M0 core can perform control calculations while the integrated ADC handles sensor acquisition and the communication peripherals move measurement data to a host. The 16 KB Flash limit favors compact, event-driven firmware rather than large local data storage. Exact low-power modes and wake sources must be confirmed in the manufacturer documentation, and the power architecture should prevent sensor or transceiver current from overwhelming the MCU supply budget.
Рекомендуется
Communication Bridge
The STM32F031C4T6 works as a protocol-conversion or isolated communication bridge when a system must move data between SPI, I2C, and UART devices. Its 48 MHz core handles framing and buffering, while 4 KB of SRAM accommodates small protocol state and transmit or receive queues. The 48-pin LQFP package offers more external connections than smaller MCU packages, which can simplify assignment of multiple serial functions. Firmware should use bounded buffers and explicit timeout handling, while PCB layout should separate transceiver or connector routing from the ADC and clock paths.
Рекомендуется
Building Access Peripheral
The STM32F031C4T6 is suitable for a compact access-control peripheral such as a keypad controller, door interface, or credential-reader node. The device can scan digital inputs, drive indicator or lock-control signals, and communicate with a higher-level controller through a serial interface. Its 48 MHz Cortex-M0 performance is more than adequate for event handling and debounce routines, while the 3.3 V operating range simplifies integration with common door-control electronics. Validate electrical levels at every external connector and implement safe lock-release behavior in firmware rather than relying only on hardware defaults.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для STM32F031C4T6 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | STM32F030C4T6 | STM32F050C4T6TR | STM32F031K4T6 | HK32F031C4T6 |
|---|---|---|---|---|---|
| Package | 48-pin LQFP | 48-pin LQFP | 48-pin LQFP | 48-pin LQFP | 48-pin LQFP |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | HK32 |
Ключевые отличия
- Provides the documented combination of 48 MHz performance, 16 KB Flash, and 4 KB SRAM (против STM32F030C4T6)
- Uses the established STMicroelectronics STM32F0 software and peripheral platform (против HK32F031C4T6)
- Offers nine documented timers for compact timing and PWM workloads (против STM32F050C4T6TR)
Заметки по проектированию
Design the supply for the full 2.0 V to 3.6 V operating range, including startup and transient conditions at the 48 MHz maximum clock. Place the manufacturer-recommended decoupling capacitors adjacent to the corresponding VDD and VSS pins, and verify the power source can support the configured peripherals without causing brownout resets. For a 3.3 V system, ensure every connected peripheral uses compatible signal levels rather than relying on 5 V-tolerant assumptions that are not documented for this device.
Use the manufacturer package drawing and pin-description table when creating the LQFP-48 land pattern. Keep the exposed signal paths away from antenna keepouts when the controller is placed near an RF module, and provide adequate board-edge clearance for the fine-pitch leads. Confirm the pin-1 orientation against the PCB assembly drawing; unlike a reel-code change, a package orientation error can prevent the MCU from operating or programming correctly.
Route analog inputs from the sensor toward the ADC pins without long parallel runs beneath switching nodes. If the design uses a switching supply or power MOSFET, keep high-current paths away from the ADC reference and ground area, and use a quiet ground path where the board topology permits. Check the ADC source impedance and acquisition time against the configured clock to avoid incomplete conversions or excessive conversion-cycle overhead.
Do not treat a family member with a similar order code as an automatic replacement. Verify the complete pin assignment, alternate-function availability, ADC channels, timer outputs, communication instances, clock pins, boot configuration, and reset behavior. For HK32F031C4T6, add ADC accuracy, clock, low-power, startup, and firmware tests because the cross-reference information identifies behavior differences that may not appear in the package drawing.
Информация о соответствии
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified for the exact ordering code. Confirm compliance with the current STMicroelectronics product documentation before production release.