STM32F031F4P6 - 48MHz Cortex-M0 16KB MCU | STMicroelectronics
MPN: STM32F031F4P6 ✓ AktifSTM32F031F4P6 Ringkasan
A microcontroller is a semiconductor device that integrates a processor core, memory, and peripherals into one package. The STM32F031F4P6 is specifically an Arm Cortex-M0 microcontroller within the STM32F0 family. Its architecture is designed for compact control systems where deterministic execution, low component count, and straightforward peripheral integration are more important than application-processor performance.
The principal device ratings include a 48 MHz maximum operating frequency, 16 KB of programmable Flash organized as 16K × 8, 32-bit processing, and a 20-pin TSSOP package. The STM32F031F4P6 is appropriate for small control platforms that benefit from a high-performance Cortex-M0 core without requiring the memory or package size of a larger microcontroller.
Its 48 MHz operating point provides additional timing headroom for GPIO control, serial communication, timer-based control, and system management functions. The 16 KB Flash capacity supports embedded boot code, application firmware, configuration data, and firmware updates within one integrated device. Because memory capacity is fixed, firmware size should be checked against the target application before PCB release.
Typical uses include compact sensor controllers, small motor-control boards, industrial interface modules, battery-powered instruments, LED-control systems, and low-cost embedded accessories. The 20-pin TSSOP footprint can also simplify assembly where fine-pitch packages would increase production complexity or inspection requirements.
PCB design should reserve all pins required by the selected STM32F031F4P6 pinout, connect the required programming and reset signals correctly, and provide suitable decoupling close to the supply pins. Review the complete pin-description, electrical-characteristics, and recommended-circuit sections in the manufacturer datasheet before finalizing the footprint and support components.
This product page combines the manufacturer device characteristics with package, sourcing, replacement, and design guidance. It also highlights the distinction between electrically similar STM32F0 devices and a genuine pin-for-pin drop-in replacement, helping engineers reduce redesign risk while preserving firmware and PCB compatibility.
Pilihan pengganti yang segera untuk STM32F031F4P6 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera STM32F031F4P6 (sama faktor bentuk dan kaki) — berbeza dalam Package, Flash Memory, ADC, ADC Resolution, Core Architecture.
STM32F031F6P6
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →STM32F030F4P6
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →STM32F031F4P6TR
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
STM32F031F6P6TR
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
STM32F031F4P6 Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 16 KB (16K x 8) |
| CPU Architecture | ARM Cortex-M0 32-bit RISC |
| Kemasan | 20-pin TSSOP |
| Jenis Pemasangan | Surface mount |
| ADC Resolution | 12-bit |
| ADC Features | 12-bit and 15-bit features identified in the product listing |
| Status RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
Panduan Konfigurasi Pin STM32F031F4P6 20-pin tssop
Konfigurasi pin untuk STM32F031F4P6 (20-pin tssop pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk STM32F031F4P6.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
STM32F031F4P6 patut untuk 6 aplikasis: Compact Sensor Controller, Small Motor Control, LED Lighting Controller, Industrial Interface Module, Battery-Powered Instrument, Programmable Control Module.
Compact Sensor Controller
The STM32F031F4P6 fits compact sensor-controller designs because its 48 MHz Arm Cortex-M0 core provides useful processing headroom for acquisition timing, filtering, configuration handling, and communications control. The 16 KB Flash holds embedded firmware, calibration tables, and device-specific parameters without requiring external program memory. In a 20-pin TSSOP package, it supports a compact board footprint and accessible assembly. Check the final GPIO allocation and ADC timing against the datasheet, but the device is appropriate for low-cost environmental, industrial, and equipment-monitoring modules where a small MCU and simple firmware update path are priorities.
Disebarkan
Small Motor Control
The STM32F031F4P6 can serve as the command controller in small stepper, fan, pump, or actuator-control boards where the firmware must coordinate timers, GPIO outputs, and sensor feedback. Its 48 MHz Cortex-M0 core provides enough execution margin for position steps, status logic, and communication routines in compact systems. The 16 KB Flash capacity is adequate for focused control firmware, while the 20-pin TSSOP package helps preserve PCB area. Before schematic release, verify timer channels, comparator availability, pin multiplexing, and any required external driver components in the manufacturer documentation.
Disebarkan
LED Lighting Controller
The STM32F031F4P6 is well suited to LED lighting modules that require timed patterns, button handling, status indication, and serial configuration. Its 48 MHz processing rate supports responsive control tasks, and the integrated 16 KB Flash is suitable for a dedicated lighting application with a compact firmware image. The 20-pin TSSOP package offers enough external connections for LED drive control, while its relatively accessible lead pitch can simplify assembly and inspection. Confirm the exact GPIO drive ratings, timer outputs, and pin assignment for the selected LED topology before committing the board layout.
Disebarkan
Industrial Interface Module
The STM32F031F4P6 is suitable for compact industrial interface modules that translate sensor or equipment signals into a digital control function. The Cortex-M0 architecture can handle protocol formatting, status monitoring, configuration, and fault flags at up to 48 MHz, while 16 KB of Flash provides room for a dedicated protocol stack and application logic. Its 20-pin TSSOP package supports a small, production-friendly board with accessible leads. Validate the required communication peripheral, electrical levels, isolation requirements, and pin multiplexing against the exact device documentation before PCB release.
Disebarkan
Battery-Powered Instrument
The STM32F031F4P6 can serve as the control hub in a small battery-powered instrument that performs measurement, local display control, button handling, and low-rate data transfer. Its 48 MHz Cortex-M0 core supports responsive signal-processing and control routines, and the 16 KB Flash accommodates a compact application without an external memory device. The TSSOP-20 package reduces board area, while low-power behavior can be implemented through the firmware and peripheral configuration. Review sleep-mode characteristics, supply currents, and wakeup requirements in the manufacturer datasheet for the intended battery chemistry and duty cycle.
Disebarkan
Programmable Control Module
The STM32F031F4P6 is appropriate for programmable control modules used in test fixtures, educational equipment, and small automation accessories. At up to 48 MHz, the Cortex-M0 core can execute control sequences and respond to external commands, while 16 KB of Flash stores application logic and configuration. The 20-pin TSSOP package leaves a practical assembly option for compact modules and breadboard-compatible adapters. A complete design should use the manufacturer programming and pin guidance, including reset behavior, boot configuration, clock setup, and decoupling, so that identical hardware can be programmed consistently across production units.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk STM32F031F4P6 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | STM32F031F6P6 | STM32F030F4P6 | STM32F031F4P6TR | STM32F031F6P6TR |
|---|---|---|---|---|---|
| Package | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| CPU Core | 32-bit ARM Cortex-M0 | 32-bit ARM Cortex-M0 | 32-bit ARM Cortex-M0 | 32-bit ARM Cortex-M0 | 32-bit ARM Cortex-M0 |
| Flash Memory | 16 KB (16K x 8) | 32 KB | 16 KB | 16 KB (16K x 8) | 32 KB |
| Series | STM32F031 | STM32F031 | STM32F030 | STM32F031 | STM32F031 |
| Delivery Packaging Suffix | Non-TR ordering code | Non-TR ordering code | Non-TR ordering code | Tape-and-reel ordering code | Tape-and-reel ordering code |
Penyeberangsung Jelas
- Entry-level Cortex-M0 performance in an accessible 20-pin package (vsSTM32F030F4P6)
- Lower memory requirement for focused firmware (vsSTM32F031F6P6)
- Exact electrical configuration with production reel ordering (vsSTM32F031F4P6TR)
- Compact 20-pin integration with 12-bit conversion support (vsSTM32F031F6P6)
Catatan Desain
Assign the PCB footprint directly from the manufacturer STM32F031F4P6 pinout and package drawing, and verify that all 20 pins are represented in the schematic and layout files. Place required decoupling capacitors close to their corresponding supply pins with short return paths to the ground reference. Use the manufacturer pin-description table when confirming programming, reset, clock, and ground assignments; do not infer pin functions from a similarly named STM32 device.
Design the supply network around the exact operating-voltage range, maximum input voltage, and I/O current limits stated in the manufacturer datasheet. Confirm which pins require the main supply and what voltage, if any, must be applied to the I/O pins. Include local bulk capacitance where recommended, and ensure any external sensor or communication circuit cannot back-feed a power rail during reset or sleep states.
Keep sensitive timing, programming, oscillator, and communication routes away from high-current switching nodes and noisy digital edges. Follow the manufacturer application-circuit recommendations for decoupling and grounding, and provide clean return paths beneath the TSSOP device where the layout stack-up permits. If an external clock is used, place its components near the relevant pins and control trace length to reduce timing and noise susceptibility.
Do not treat a related STM32F0 order code as interchangeable without checking memory size, peripheral mapping, pin multiplex functions, electrical limits, and boot behavior. The STM32F031F6P6 provides more Flash than the STM32F031F4P6, while the STM32F030F4P6 belongs to a related family. Run a compile, peripheral-test, and brownout-reset review after any substitution to catch assumptions that are not visible in the order code alone.
Maklumat Kesediaan
Compliance status was not explicitly stated in the manufacturer or distributor product information.