STMicroelectronics

STM32F031F4P6 - 48MHz Cortex-M0 16KB MCU | STMicroelectronics

MPN: STM32F031F4P6 ✓ فعال
20-pin TSSOP Package 48 MHz Speed 16 KB (16K x 8) Memory
حداقل سفارش: 1 |

STM32F031F4P6 نمای کلی

The STMicroelectronics STM32F031F4P6 is a 32-bit Arm Cortex-M0 microcontroller operating up to 48 MHz, with 16 KB of Flash memory, in a 20-pin TSSOP package. It belongs to the STM32F0 entry-level MCU family and combines a compact RISC core, embedded Flash, and peripheral interfaces for cost-sensitive embedded-control designs.

A microcontroller is a semiconductor device that integrates a processor core, memory, and peripherals into one package. The STM32F031F4P6 is specifically an Arm Cortex-M0 microcontroller within the STM32F0 family. Its architecture is designed for compact control systems where deterministic execution, low component count, and straightforward peripheral integration are more important than application-processor performance.

The principal device ratings include a 48 MHz maximum operating frequency, 16 KB of programmable Flash organized as 16K × 8, 32-bit processing, and a 20-pin TSSOP package. The STM32F031F4P6 is appropriate for small control platforms that benefit from a high-performance Cortex-M0 core without requiring the memory or package size of a larger microcontroller.

Its 48 MHz operating point provides additional timing headroom for GPIO control, serial communication, timer-based control, and system management functions. The 16 KB Flash capacity supports embedded boot code, application firmware, configuration data, and firmware updates within one integrated device. Because memory capacity is fixed, firmware size should be checked against the target application before PCB release.

Typical uses include compact sensor controllers, small motor-control boards, industrial interface modules, battery-powered instruments, LED-control systems, and low-cost embedded accessories. The 20-pin TSSOP footprint can also simplify assembly where fine-pitch packages would increase production complexity or inspection requirements.

PCB design should reserve all pins required by the selected STM32F031F4P6 pinout, connect the required programming and reset signals correctly, and provide suitable decoupling close to the supply pins. Review the complete pin-description, electrical-characteristics, and recommended-circuit sections in the manufacturer datasheet before finalizing the footprint and support components.

This product page combines the manufacturer device characteristics with package, sourcing, replacement, and design guidance. It also highlights the distinction between electrically similar STM32F0 devices and a genuine pin-for-pin drop-in replacement, helping engineers reduce redesign risk while preserving firmware and PCB compatibility.

جایگزین‌های drop-in برای STM32F031F4P6 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای STM32F031F4P6 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Flash Memory, ADC, ADC Resolution, Core Architecture.

Microchip Technology
Package: 32-pin TQFP (7x7 mm)
ADC: 12-bit, up to 14 channels
Core Architecture: ARM Cortex-M0+
مقایسه با STM32F031F4P6 →
STMicroelectronics
ADC Resolution: 12-bit and 15-bit
Core Architecture: Arm Cortex-M0
مقایسه با STM32F031F4P6 →
STMicroelectronics
Package: 20-pin TSSOP, 4.40 mm body width
Flash Memory: 32 KB
ADC: Integrated analog-to-digital converter
مقایسه با STM32F031F4P6 →

STM32F031F6P6

✅ جایگزین مستقیم
STMicroelectronics
📦 TSSOP-20
32-bit ARM Cortex-M0 microcontroller · 48 MHz · 32 KB · 32K x 8 bits · ARM Cortex-M0 32-bit RISC · 9 timers · Integrated analog-to-digital converter · 20-pin TSSOP, 4.40 mm body width

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

STM32F030F4P6

✅ جایگزین مستقیم
STMicroelectronics
📦 TSSOP-20
Arm Cortex-M0 32-bit RISC · 48 MHz · 16 KB (16K x 8) · 4 KB · 2.4 V to 3.6 V · Arm-based 32-bit RISC · 12-bit and 15-bit · 20-pin TSSOP

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

STM32F031F4P6TR

✅ جایگزین مستقیم
📦 TSSOP-20
Electrical identity matches, while the order suffix changes delivery packaging to tape-and-reel format.

📋 جایگزین مرجع (خارج از کاتالوگ)

STM32F031F6P6TR

✅ جایگزین مستقیم
📦 TSSOP-20
Flash increases from 16 KB to 32 KB, a 100% increase, and the order suffix changes delivery packaging to tape-and-reel format.

📋 جایگزین مرجع (خارج از کاتالوگ)

STM32F031F4P6 حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type 32-bit ARM Cortex-M0 microcontroller
Maximum CPU Frequency 48 MHz
Flash Memory 16 KB (16K x 8)
CPU Architecture ARM Cortex-M0 32-bit RISC
بسته‌بندی 20-pin TSSOP
نوع نصب Surface mount
ADC Resolution 12-bit
ADC Features 12-bit and 15-bit features identified in the product listing
وضعیت RoHS unknown
REACH Status unknown
AEC-Q100 Qualification unknown

راهنمای پیکربندی پین STM32F031F4P6 20-pin tssop

پیکربندی پین برای STM32F031F4P6 (پکیج 20-pin tssop). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 20-pin tssop برای STM32F031F4P6

داده پین‌آوت تفصیلی موجود نیست برای STM32F031F4P6.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

STM32F031F4P6 مناسب است برای 6 کاربردs: Compact Sensor Controller, Small Motor Control, LED Lighting Controller, Industrial Interface Module, Battery-Powered Instrument, Programmable Control Module.

🧩

Compact Sensor Controller

The STM32F031F4P6 fits compact sensor-controller designs because its 48 MHz Arm Cortex-M0 core provides useful processing headroom for acquisition timing, filtering, configuration handling, and communications control. The 16 KB Flash holds embedded firmware, calibration tables, and device-specific parameters without requiring external program memory. In a 20-pin TSSOP package, it supports a compact board footprint and accessible assembly. Check the final GPIO allocation and ADC timing against the datasheet, but the device is appropriate for low-cost environmental, industrial, and equipment-monitoring modules where a small MCU and simple firmware update path are priorities.

🔧

Small Motor Control

The STM32F031F4P6 can serve as the command controller in small stepper, fan, pump, or actuator-control boards where the firmware must coordinate timers, GPIO outputs, and sensor feedback. Its 48 MHz Cortex-M0 core provides enough execution margin for position steps, status logic, and communication routines in compact systems. The 16 KB Flash capacity is adequate for focused control firmware, while the 20-pin TSSOP package helps preserve PCB area. Before schematic release, verify timer channels, comparator availability, pin multiplexing, and any required external driver components in the manufacturer documentation.

💡

LED Lighting Controller

The STM32F031F4P6 is well suited to LED lighting modules that require timed patterns, button handling, status indication, and serial configuration. Its 48 MHz processing rate supports responsive control tasks, and the integrated 16 KB Flash is suitable for a dedicated lighting application with a compact firmware image. The 20-pin TSSOP package offers enough external connections for LED drive control, while its relatively accessible lead pitch can simplify assembly and inspection. Confirm the exact GPIO drive ratings, timer outputs, and pin assignment for the selected LED topology before committing the board layout.

🏭

Industrial Interface Module

The STM32F031F4P6 is suitable for compact industrial interface modules that translate sensor or equipment signals into a digital control function. The Cortex-M0 architecture can handle protocol formatting, status monitoring, configuration, and fault flags at up to 48 MHz, while 16 KB of Flash provides room for a dedicated protocol stack and application logic. Its 20-pin TSSOP package supports a small, production-friendly board with accessible leads. Validate the required communication peripheral, electrical levels, isolation requirements, and pin multiplexing against the exact device documentation before PCB release.

📱

Battery-Powered Instrument

The STM32F031F4P6 can serve as the control hub in a small battery-powered instrument that performs measurement, local display control, button handling, and low-rate data transfer. Its 48 MHz Cortex-M0 core supports responsive signal-processing and control routines, and the 16 KB Flash accommodates a compact application without an external memory device. The TSSOP-20 package reduces board area, while low-power behavior can be implemented through the firmware and peripheral configuration. Review sleep-mode characteristics, supply currents, and wakeup requirements in the manufacturer datasheet for the intended battery chemistry and duty cycle.

⚡

Programmable Control Module

The STM32F031F4P6 is appropriate for programmable control modules used in test fixtures, educational equipment, and small automation accessories. At up to 48 MHz, the Cortex-M0 core can execute control sequences and respond to external commands, while 16 KB of Flash stores application logic and configuration. The 20-pin TSSOP package leaves a practical assembly option for compact modules and breadboard-compatible adapters. A complete design should use the manufacturer programming and pin guidance, including reset behavior, boot configuration, clock setup, and decoupling, so that identical hardware can be programmed consistently across production units.

What is the operating frequency of the STM32F031F4P6?
The STM32F031F4P6 operates at up to 48 MHz. According to the STMicroelectronics STM32F031x4/x6 product page, the device uses a high-performance 32-bit Arm Cortex-M0 RISC core, while the manufacturer product listing identifies 48 MHz as its maximum operating frequency. This clock rate provides processing headroom for GPIO sequencing, timers, communication routines, and supervisory control tasks in compact embedded products.
How much Flash memory does the STM32F031F4P6 have?
The STM32F031F4P6 contains 16 KB of Flash memory, organized as 16K × 8. The manufacturer product listing states this capacity directly, while the STMicroelectronics product page identifies the F031x4/x6 devices as high-performance Cortex-M0 microcontrollers. Developers should budget space for bootloader code, application firmware, calibration values, and update data before selecting the device for a new design.
What package is used by the STM32F031F4P6?
The STM32F031F4P6 uses a 20-pin TSSOP package. The manufacturer product listing identifies the package as 20-TSSOP, and the product is designed for surface-mount assembly. Use the pinout and land-pattern information in the manufacturer datasheet when assigning tracks and placing decoupling capacitors. The TSSOP-20 package offers a practical balance between pin availability and assembly complexity.
Where can I download the STM32F031F4P6 datasheet?
The official STM32F031F4P6 technical documentation is available through the STMicroelectronics STM32F031F4 product page. The page identifies the Cortex-M0 core, 48 MHz maximum frequency, and F031x4/x6 family positioning, while the manufacturer datasheet provides the detailed pin description, electrical characteristics, memory map, and recommended application circuits. Use the manufacturer PDF as the controlling document for PCB and firmware implementation.
Where can I find the STM32F031F4P6 pinout?
The STM32F031F4P6 pinout is documented in the manufacturer datasheet under the package and pin-description information for the 20-pin TSSOP device. The product is confirmed as a 20-TSSOP MCU with a 48 MHz Cortex-M0 core and 16 KB Flash. Assign PCB nets directly from the official pin table rather than from an image-based diagram, and verify every power, ground, reset, clock, and programming connection before layout release.
Is the STM32F031F4P6 suitable for a compact embedded controller?
The STM32F031F4P6 is suitable for compact embedded-control products that require a 32-bit Cortex-M0 core, up to 48 MHz processing, and 16 KB of integrated Flash. Its 20-pin TSSOP package provides access to a useful mix of GPIO and embedded peripherals without introducing a large fine-pitch footprint. It is especially suitable for sensor interfaces, compact timers, LED systems, and low-cost control modules where the firmware remains within the available memory.
STM32F031F4P6 vs STM32F031F6P6: which MCU should I choose?
Choose the STM32F031F4P6 when 16 KB of Flash is sufficient, and choose the STM32F031F6P6 when the larger-memory variant fits the firmware and the board can accept its memory increase. Both belong to the STM32F031 family and share the core and package family, but memory capacity is the principal practical distinction. Confirm the exact ordering code, pin arrangement, and firmware requirements against the manufacturer datasheet.
When should I choose the STM32F031F4P6 instead of STM32F030F4P6?
Choose the STM32F031F4P6 when its STM32F031 peripheral set and device characteristics provide the required control functions. The STM32F030F4P6 is a closely related STM32F0 option with a similar 16 KB Flash target and Cortex-M0 architecture, but related families can differ in peripheral availability and feature mapping. Use the manufacturer comparison information for the selected package before treating either device as a substitute.
What is the best drop-in replacement for the STM32F031F4P6?
The closest supported drop-in path is the STM32F031F6P6 because it belongs to the same STM32F031 family and is identified as a 20-pin PDSO20 equivalent candidate. It provides more Flash than the STM32F031F4P6, so this is a memory upgrade rather than an identical part. Review the complete pin table, electrical limits, peripheral differences, and firmware migration requirements before substituting it on an existing PCB.
Can an STM32F031F4P6TR replace the STM32F031F4P6?
The STM32F031F4P6TR is the tape-and-reel order form of the STM32F031F4P6 rather than a different silicon function. It can support the same design when its reel packaging matches the assembly process, temperature grade, and other ordering options are acceptable. Because packaging and temperature-range suffixes can change commercial or qualification requirements, verify the full ordering information rather than relying on the abbreviated base MPN alone.
Where can I buy STM32F031F4P6 online?
Use the Request a Quote form on this page to request STM32F031F4P6 availability, lead time, and a quotation for the required quantity and packaging. The device is a standard 48 MHz Cortex-M0 microcontroller with 16 KB Flash in a 20-pin TSSOP package, but production planning should confirm current stock, minimum order quantity, and delivery timing through that form. The manufacturer product page is also the appropriate starting point for technical documentation.
What is the price of the STM32F031F4P6?
Current commercial terms for the STM32F031F4P6 should be requested through the Request a Quote form on this page. The form allows the required quantity, package form, delivery location, and production schedule to be considered together. Technical identity is confirmed by the 48 MHz Cortex-M0 core, 16 KB Flash, and 20-pin TSSOP specification, which helps prevent comparison with unrelated STM32F0 devices.
What is the lead time for the STM32F031F4P6?
Request the current lead time through the Request a Quote form on this page, including your required order quantity and target delivery date. Lead time can vary with order size, packaging form, manufacturing conditions, and logistics requirements. For engineering planning, the confirmed device configuration is a 32-bit Cortex-M0 MCU operating at up to 48 MHz with 16 KB Flash in a 20-pin TSSOP package.
Is the STM32F031F4P6 in stock?
Current stock status for the STM32F031F4P6 should be confirmed through the Request a Quote form on this page. Include the required quantity, reel or other delivery format, and shipment destination so the response reflects the actual order configuration. The part is a standard STM32F031x4/x6 device with a 48 MHz Cortex-M0 core, 16 KB Flash, and 20-pin TSSOP package.
What are the key specifications of the STM32F031F4P6 that engineers should know?
The key specifications are a 32-bit Arm Cortex-M0 core, up to 48 MHz operating frequency, 16 KB of Flash arranged as 16K × 8, and a 20-pin TSSOP package. The manufacturer product listing also identifies 12-bit and 15-bit conversion features. These facts define the device as an entry-level STM32F0 MCU for compact embedded-control products, subject to the complete electrical and memory specifications in the manufacturer datasheet.

داده‌های مرجع مهندسی برای STM32F031F4P6 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the STM32F031F4P6 when a compact control design needs a 48 MHz 32-bit Cortex-M0 core, 16 KB of Flash, and a 20-pin TSSOP footprint without the extra memory of the F6 variant. Select the STM32F031F6P6 when firmware growth, larger lookup tables, or additional application code make 32 KB preferable; confirm the pin configuration and memory implications before treating it as a drop-in upgrade. Consider the STM32F030F4P6 only after comparing its peripheral set, pin multiplexing, and device-specific behavior with the STM32F031F4P6. Use the TR suffix when the assembly process requires tape-and-reel ordering and the remaining ordering conditions are unchanged. For any substitution, validate the schematic, Boot pins, clock configuration, timing, reset behavior, and firmware at board level rather than relying on package appearance alone.

مقایسه با جایگزین‌ها

پارامتر این محصول STM32F031F6P6 STM32F030F4P6 STM32F031F4P6TR STM32F031F6P6TR
Package 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz
CPU Core 32-bit ARM Cortex-M0 32-bit ARM Cortex-M0 32-bit ARM Cortex-M0 32-bit ARM Cortex-M0 32-bit ARM Cortex-M0
Flash Memory 16 KB (16K x 8) 32 KB 16 KB 16 KB (16K x 8) 32 KB
Series STM32F031 STM32F031 STM32F030 STM32F031 STM32F031
Delivery Packaging Suffix Non-TR ordering code Non-TR ordering code Non-TR ordering code Tape-and-reel ordering code Tape-and-reel ordering code

تفاوت‌های کلیدی

  • Entry-level Cortex-M0 performance in an accessible 20-pin package (در مقابلSTM32F030F4P6)
  • Lower memory requirement for focused firmware (در مقابلSTM32F031F6P6)
  • Exact electrical configuration with production reel ordering (در مقابلSTM32F031F4P6TR)
  • Compact 20-pin integration with 12-bit conversion support (در مقابلSTM32F031F6P6)

یادداشت‌های طراحی

Assign the PCB footprint directly from the manufacturer STM32F031F4P6 pinout and package drawing, and verify that all 20 pins are represented in the schematic and layout files. Place required decoupling capacitors close to their corresponding supply pins with short return paths to the ground reference. Use the manufacturer pin-description table when confirming programming, reset, clock, and ground assignments; do not infer pin functions from a similarly named STM32 device.

Design the supply network around the exact operating-voltage range, maximum input voltage, and I/O current limits stated in the manufacturer datasheet. Confirm which pins require the main supply and what voltage, if any, must be applied to the I/O pins. Include local bulk capacitance where recommended, and ensure any external sensor or communication circuit cannot back-feed a power rail during reset or sleep states.

Keep sensitive timing, programming, oscillator, and communication routes away from high-current switching nodes and noisy digital edges. Follow the manufacturer application-circuit recommendations for decoupling and grounding, and provide clean return paths beneath the TSSOP device where the layout stack-up permits. If an external clock is used, place its components near the relevant pins and control trace length to reduce timing and noise susceptibility.

Do not treat a related STM32F0 order code as interchangeable without checking memory size, peripheral mapping, pin multiplex functions, electrical limits, and boot behavior. The STM32F031F6P6 provides more Flash than the STM32F031F4P6, while the STM32F030F4P6 belongs to a related family. Run a compile, peripheral-test, and brownout-reset review after any substitution to catch assumptions that are not visible in the order code alone.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

Compliance status was not explicitly stated in the manufacturer or distributor product information.

تاریخ تأیید داده‌ها: 2026-11-15 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

STM32F031F4P6 datasheet STM32F031F4P6 pinout STM32F031F4P6 datasheet pdf STM32F031F4P6 equivalent STM32F031F4P6 replacement STM32F031F4P6 cross reference STM32F031F4P6 vs STM32F031F6P6 STM32F031F4P6 price STM32F031F4P6 stock STMicroelectronics STM32F031F4P6 STM32F031F4P6 TSSOP-20 footprint STM32F031F4P6 application circuit

قطعات و اصطلاحات مرتبط

STMicroelectronics STM32F031F4P6 STM32F031F6P6 STM32F030F4P6 STM32F031F4P6TR STM32F031F6P6TR STM32F031 STM32F030 Arm Cortex-M0 32-bit RISC core microcontroller MCU embedded control 48 MHz 16 KB Flash 12-bit ADC 20-pin TSSOP TSSOP-20 surface-mount package GPIO ADC power management firmware sensor controller
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ