STMicroelectronics

STM32F070C6T6 - 48MHz Cortex-M0 USB MCU | ST

MPN: STM32F070C6T6 ✓ Aktif
48-LQFP, 7 x 7 mm Package 48 MHz Speed 32 KB Memory
MOQ: 1 |

STM32F070C6T6 Ringkasan

The STMicroelectronics STM32F070C6T6 is a 32-bit Arm Cortex-M0 microcontroller operating at 48 MHz, with 32 KB of Flash memory and a full-speed USB device peripheral, all housed in a 48-LQFP 7 x 7 mm package. It combines a compact 48-pin footprint with USB connectivity and the STM32F0 access-pin architecture for efficient entry-level embedded control.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and interface circuitry on one device. The STM32F070C6T6 belongs to the STM32F0 family, where the Arm Cortex-M0 core provides a low-complexity RISC architecture for embedded control. Its USB 2.0-compatible full-speed device peripheral adds a practical communication path for configuration, data exchange, and firmware update systems without requiring a separate USB interface controller.

The principal device characteristics are a 48 MHz operating frequency, 32-bit Arm Cortex-M0 processing, 32 KB of Flash, and full-speed USB device support. The manufacturer identifies the part in a 48-LQFP 7 x 7 mm package. This combination makes the device suitable for compact embedded products that need USB connectivity but not the processing capacity, memory, or pin count of a larger STM32 member.

The USB device peripheral includes an internal USB PHY with embedded pull-up support and battery-charging detection according to the Battery Charging Specification Revision 1.2, as stated by STMicroelectronics. These features simplify USB-connected peripheral designs by reducing external interface requirements. Designers should still account for the USB data signaling, power, clock, decoupling, and firmware-support requirements of the complete application circuit.

Typical uses include USB-connected control accessories, compact data-collection equipment, human-interface devices, simple programmers, and low-cost embedded control modules. The 48-LQFP package provides a useful balance between routing flexibility and board size, while the dedicated USB interface makes the MCU suitable for designs where a dedicated USB interface would add cost and board area.

For PCB implementation, follow the pin-definition table and recommended layout guidance in the manufacturer datasheet. Place the required bypass capacitors adjacent to the power pins, keep USB data routing short and impedance-controlled, and provide appropriate clock and reset support. The exposed thermal arrangement and power dissipation should be checked against the final operating current and ambient temperature.

This product page combines the manufacturer electrical definitions with application guidance, drop-in replacement analysis, and practical PCB considerations. It is intended to help engineers determine whether the 48 MHz Cortex-M0 core, 32 KB Flash configuration, USB device support, and 48-LQFP footprint fit a specific embedded design before starting layout or firmware integration.

Pilihan pengganti yang segera untuk STM32F070C6T6 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera STM32F070C6T6 (sama faktor bentuk dan kaki) — berbeza dalam Flash Memory, Package, Product Type, RoHS Status, Series.

STMicroelectronics
Package: 48-pin LQFP (7x7 mm)
RoHS Status: Compliant
Bandingkan Dengan STM32F070C6T6 →
STMicroelectronics
Flash Memory: 32 KB (32K x 8)
Package: 48-LQFP (7 x 7 mm)
Product Type: 32-bit ARM Cortex-M0 microcontroller
Bandingkan Dengan STM32F070C6T6 →
STMicroelectronics
Flash Memory: 64 KB
Package: 48-LQFP (7 x 7 mm)
Product Type: 32-bit ARM Cortex-M0 microcontroller
Bandingkan Dengan STM32F070C6T6 →

STM32F030C6T6

✅ Masuk Drop-In
STMicroelectronics
📦 48-LQFP (7x7)
ARM Cortex-M0 32-bit RISC · 48 MHz · 32 KB · 4 KB · 2.4 V to 3.6 V · -40 C to +85 C · 48-pin LQFP (7x7 mm) · 12-bit SAR, up to 10 channels

✓ Ada di Stok

$1.15 / Unit

Lihat Datasheet →

STM32F031C6T6

✅ Masuk Drop-In
STMicroelectronics
📦 48-LQFP (7x7)
32-bit ARM Cortex-M0 microcontroller · 48 MHz · 32 KB (32K x 8) · ARM Cortex-M0 32-bit RISC · STM32F031x4/x6 · 48-LQFP (7 x 7 mm) · Surface Mount

Hubungi untuk harga

Lihat Datasheet →

STM32F070C8T6

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 48-LQFP (7x7)
Same STM32F070 family and 48-LQFP footprint; Flash increases from 32 KB to 64 KB, a difference of 32 KB or 100%.

📋 Alternatif rujukan (tidak dalam katalog)

STM32F072C6T6

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 48-LQFP (7x7)
Same 48-LQFP footprint, 48 MHz Cortex-M0 core, and 32 KB Flash configuration; additional STM32F072 family peripherals may require firmware and pin-function review.

📋 Alternatif rujukan (tidak dalam katalog)

STM32F072C8T6

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
STMicroelectronics
📦 48-LQFP (7x7)
32-bit ARM Cortex-M0 microcontroller · 48 MHz · 64 KB · 32-bit RISC · ARM Cortex-M0 · 48-LQFP (7 x 7 mm) · USB and CAN · STM32F0

Hubungi untuk harga

Lihat Datasheet →

STM32F070C6T6 Penilaian maksimum & Ciri-ciri Elektrik

Product Type 32-bit microcontroller
Processor Core Arm Cortex-M0
Architecture 32-bit RISC
Maximum CPU Frequency 48 MHz
Flash Memory 32 KB
Flash Organization 32K x 8 bits
USB Interface Full-speed USB 2.0 device
USB PHY Internal USB full-speed PHY
USB Pull-Up Embedded DP pull-up
Battery Charging Detection Battery Charging Specification Revision 1.2
Kemasan 48-LQFP, 7 x 7 mm
Kiraan Pin 48 pins
Jenis Pemasangan Surface mount

Panduan Konfigurasi Pin STM32F070C6T6 48-lqfp, 7 x 7 mm

Konfigurasi pin untuk STM32F070C6T6 (48-lqfp, 7 x 7 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 48-lqfp, 7 x 7 mm untuk STM32F070C6T6

Tiada data garisan pin yang diperoleh untuk STM32F070C6T6.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

STM32F070C6T6 patut untuk 6 aplikasis: USB-connected Control Accessory, Human-Interface Device, USB Data-Collection Module, Compact Programmer and Configuration Tool, Industrial Sensor Interface, USB Communication Bridge.

🔌

USB-connected Control Accessory

The STM32F070C6T6 fits a compact USB control accessory because it combines a 48 MHz Arm Cortex-M0 core with a full-speed USB device peripheral in a 48-LQFP 7 x 7 mm package. The internal USB PHY and embedded DP pull-up reduce the external interface component count. Place the MCU between the USB connector and the accessory’s control logic, then implement enumeration and command handling in the device firmware. The 32 KB Flash capacity is suitable for protocol and control code, although it requires disciplined image sizing when USB descriptors, update logic, and application firmware are combined.

🖱️

Human-Interface Device

The STM32F070C6T6 supports a USB human-interface device by using its full-speed USB 2.0-compatible peripheral for HID traffic while the Cortex-M0 core handles button states, indicators, and control logic. Its 48 MHz operating frequency provides adequate response for standard polling-based HID workloads, while the 48-LQFP package leaves access to a broad pin complement for switches, sensors, or status LEDs. Firmware should implement the USB stack, report descriptors, debounce handling, and suspend behavior. Board validation should include enumeration testing across the intended host operating systems and cable or connector configurations.

📟

USB Data-Collection Module

The STM32F070C6T6 is appropriate for a small data-collection module that periodically sends measurements to a USB host. The 48 MHz Cortex-M0 core can supervise sampling and control routines, while the integrated full-speed USB device interface handles the host connection without a separate USB bridge controller. The 32 KB Flash footprint suits a focused acquisition application with local configuration and a modest protocol stack. Designers should size the firmware against the full firmware image, implement buffering appropriate to the host polling interval, and verify timing under worst-case sample rates and bus-traffic conditions.

💾

Compact Programmer and Configuration Tool

The STM32F070C6T6 can serve as the controller in a compact programmer or configuration tool that connects to a target board over USB. Its full-speed device capability supports command exchange and firmware transfer, while the 48 MHz Cortex-M0 core executes protocol handling and target-control logic. The 48-LQFP package is useful when the product needs both USB and a conventional set of general-purpose interfaces. A production design should add protection for the externally exposed target connector, define robust cable or connector handling, and validate the programmed target across voltage levels and devices supported by the tool.

🏭

Industrial Sensor Interface

The STM32F070C6T6 is suitable for a compact industrial sensor interface that must collect local measurements and expose status or configuration data over USB. Its 48 MHz processing rate and integrated USB device interface support responsive control and data transfer without requiring a high-performance application processor. The 48-LQFP package provides a practical balance between pin availability and board area. Engineers should define sensor timing, input conditioning, isolation requirements, and grounding independently of the MCU, then validate the complete measurement chain under the intended environmental and interference conditions.

🌐

USB Communication Bridge

The STM32F070C6T6 can implement a protocol bridge between a USB host and an embedded peripheral interface. The Cortex-M0 core handles framing, device state, and the translation between USB transactions and the target interface, while the internal full-speed PHY supports direct USB connectivity. Its 32 KB Flash capacity is appropriate for a focused bridge firmware image but can become restrictive when several protocol layers, diagnostics, and update mechanisms are included. Confirm that the selected STM32F030K6T6 companion-class MCU has sufficient resources if the bridge also performs local real-time control.

What is the STM32F070C6T6?
The STM32F070C6T6 is a 32-bit Arm Cortex-M0 microcontroller that operates at up to 48 MHz and includes 32 KB of Flash memory. According to the STMicroelectronics manufacturer datasheet, it also provides a full-speed USB 2.0-compatible device peripheral and is packaged in a 48-LQFP measuring 7 x 7 mm. It is intended for compact embedded-control products requiring USB connectivity and moderate processing performance.
What are the key specifications of STM32F070C6T6 that engineers should know?
The STM32F070C6T6 combines a 48 MHz Arm Cortex-M0 core, 32-bit RISC architecture, 32 KB of 32K x 8-bit Flash, and a full-speed USB device interface. The manufacturer datasheet also identifies an internal USB PHY with embedded DP pull-up and battery-charging detection supporting Battery Charging Specification Revision 1.2. Its physical implementation is a surface-mount 48-LQFP package measuring 7 x 7 mm.
Where can I download the STM32F070C6T6 datasheet PDF?
The official STM32F070C6T6 datasheet PDF is available from the STMicroelectronics resource address on the manufacturer website. It covers the STM32F070CB, STM32F070RB, STM32F070C6, and STM32F070F6 family members, including the Cortex-M0 core, USB peripheral, electrical characteristics, package information, and pin descriptions. Use the STM32F070C6-specific column and ordering information when designing with the 48-LQFP C6 variant.
Where can I find the STM32F070C6T6 pinout?
The STM32F070C6T6 pinout is presented in the pin-description and package drawings contained in the STMicroelectronics manufacturer datasheet. The device uses a 48-LQFP 7 x 7 mm package, so there are 48 numbered positions. When assigning PCB tracks, use the exact C6 package drawing and the alternate-function tables rather than the pin maps from other STM32F0 devices with different flash capacities or package sizes.
Does the STM32F070C6T6 support full-speed USB?
Yes, the STM32F070C6T6 includes a full-speed USB device peripheral compliant with USB specification version 2.0. According to the STMicroelectronics manufacturer datasheet, the internal USB PHY supports full-speed signaling, includes an embedded DP pull-up, and provides battery-charging detection based on Battery Charging Specification Revision 1.2. Firmware and host-device support must also be configured in the USB device stack.
STM32F070C6T6 vs STM32F030C6T6 - which is better for a USB device?
The STM32F070C6T6 is the better choice when the design requires the integrated full-speed USB device peripheral. STMicroelectronics identifies USB 2.0-compatible full-speed operation, an internal USB PHY, and embedded DP pull-up support for the F070C6, while the comparison data identifies series and feature differences between the F030C6 and F070C6. Both use the 48-LQFP class of package, but USB functionality can determine compatibility.
What is the difference between STM32F070C6T6 and STM32F031C6T6?
The principal decision point is integrated USB device capability. The STM32F070C6T6 includes a full-speed USB 2.0-compatible device peripheral with an internal PHY, whereas the STM32F031C6T6 is identified as a different STM32F0 series member. The cross-reference comparison flags series, package, mounting, and compliance differences. Both are 48 MHz, 32-bit Cortex-M0 devices in the 48-LQFP class, but firmware and peripheral requirements must be checked before interchangeability is accepted.
When should I choose STM32F070C6T6 over STM32F070C8T6?
Choose the STM32F070C6T6 when 32 KB of Flash is sufficient and a full-speed USB device interface is required. The STM32F070C8T6 provides 64 KB of Flash, which is 32 KB or 100% more than the C6 configuration, so it is preferable when firmware size, dual-bank handling, or update storage demands additional space. For both devices, verify the exact package pin map and complete peripheral configuration before treating one as a direct replacement.
Is STM32F070C6T6 suitable for a compact USB-controlled peripheral?
The STM32F070C6T6 is suitable for a compact USB-controlled peripheral because it combines a 48 MHz Cortex-M0 core, 32 KB of Flash, and integrated full-speed USB device support in a 7 x 7 mm 48-LQFP package. Its USB PHY and embedded DP pull-up reduce external interface requirements. The final design must still provide correct USB routing, supply bypassing, clocking, reset behavior, and suitable enclosure or cable considerations.
What can replace STM32F070C6T6?
The closest same-manufacturer drop-in candidates are the STM32F030C6T6, STM32F031C6T6, STM32F070C8T6, STM32F072C6T6, and STM32F072C8T6 in the 48-LQFP class. However, replacement approval must account for USB support, flash capacity, peripheral mapping, clock configuration, firmware startup, and qualification requirements. A physical footprint match alone does not guarantee that existing firmware will operate without modification.
Can STM32F030C6T6 replace STM32F070C6T6 without changing the PCB?
The STM32F030C6T6 can be considered for a PCB-level replacement because it is associated with the same 48-LQFP footprint family, but it is not functionally equivalent to the STM32F070C6T6 in every respect. The most important distinction is the STM32F070C6T6's integrated full-speed USB device peripheral. Confirm that the replacement design does not require USB, then verify pin multiplexing, startup behavior, peripheral availability, and firmware support before production release.
Is there a GigaDevice equivalent for STM32F070C6T6?
No GigaDevice drop-in equivalent for the STM32F070C6T6 is established by the available manufacturer cross-reference material. The documented cross-family example concerns the STM32F103 and GD32F103 families, which does not establish pin, peripheral, or firmware compatibility with this STM32F070C6T6. Use the Request a Quote form on this page when sourcing an equivalent or second source, and require a board-level and firmware qualification plan for any proposed substitute.
Where can I buy STM32F070C6T6 online?
Use the Request a Quote form on this page to request STM32F070C6T6 availability, quantity pricing, lead time, and authorized sourcing support. The manufacturer part is identified as an STM32F070C6 device in a 48-LQFP 7 x 7 mm package with a 48 MHz Arm Cortex-M0 core and 32 KB of Flash. For production orders, confirm the exact suffix, tape-and-reel packaging, delivery schedule, and lot traceability.
What is the price of STM32F070C6T6?
Submit the STM32F070C6T6 part number through the Request a Quote form on this page for current unit pricing and quantity-break review. Pricing depends on order quantity, packaging format, delivery schedule, and sourcing channel. The same form can confirm available stock, production lead time, and whether an alternate authorized channel is appropriate for the required schedule.
What is the lead time for STM32F070C6T6?
Request the current STM32F070C6T6 lead time through the Request a Quote form on this page. The quote workflow should confirm available inventory, scheduled replenishment, order minimums, and the required 48-LQFP packing format. Engineers should include their production schedule and forecast quantity in the request so the response reflects an actionable delivery plan rather than a generic availability statement.

Data referensi kejuruteraan untuk STM32F070C6T6 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the STM32F070C6T6 when the product needs a compact 48-LQFP controller with a 48 MHz Cortex-M0 core, 32 KB of Flash, and integrated full-speed USB device support. Choose STM32F030C6T6 or STM32F031C6T6 when the footprint is acceptable but USB is not required; their differing peripheral sets must still be checked against the firmware. Choose STM32F070C8T6 when the same STM32F070 architecture needs 64 KB of Flash, providing 32 KB more memory. STM32F072C6T6 or STM32F072C8T6 are appropriate when their additional family peripherals are useful, with the C8 providing 64 KB of Flash. For every alternative, confirm the exact pin table, peripheral availability, startup behavior, USB support, and firmware compatibility rather than relying on package equivalence alone.

Perbandingan dengan Gantian

Parametr Produk Ini STM32F030C6T6 STM32F031C6T6 STM32F070C8T6 STM32F072C6T6 STM32F072C8T6
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 48-LQFP (7x7) 48-LQFP (7x7) 48-LQFP (7x7) 48-LQFP (7x7) 48-LQFP (7x7) 48-LQFP (7x7)
Processor Core Arm Cortex-M0 Arm Cortex-M0 Arm Cortex-M0 Arm Cortex-M0 Arm Cortex-M0 Arm Cortex-M0
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz 48 MHz
Flash Memory 32 KB 32 KB 32 KB 64 KB 32 KB 64 KB
USB Interface Full-speed USB 2.0 device Not present Not present Full-speed USB 2.0 device Full-speed USB 2.0 device Full-speed USB 2.0 device
Programming Temperature Indicator T6 suffix T6 suffix T6 suffix T6 suffix T6 suffix T6 suffix

Penyeberangsung Jelas

  • Integrated full-speed USB device interface (vsSTM32F030C6T6)
  • USB battery-charging detection support (vsSTM32F031C6T6)
  • Higher Flash option is available within the same family (vsSTM32F070C8T6)
  • Same footprint with a larger Flash option (vsSTM32F072C8T6)

Catatan Desain

Follow the STMicroelectronics recommended land pattern for the 48-LQFP 7 x 7 mm package and preserve pin-1 orientation marks on both the PCB and component reel. Place decoupling capacitors adjacent to the relevant supply pins and connect their ground returns through the shortest practical path. Keep USB D+ and D- traces away from switching nodes and high-current return paths, then apply the USB impedance and routing guidance specified in the manufacturer datasheet.

Calculate the supply requirement from the 48 MHz operating condition, USB transceiver demand, enabled peripherals, and the load attached to any general-purpose output. Include startup and bus-suspend states rather than evaluating only the maximum active current. Confirm that the USB host or cable power source can support the complete device load, and apply the manufacturer’s recommended supply and decoupling network without adding large bulk capacitance that could interfere with startup behavior.

Do not treat every 48-LQFP STM32F0 device as an interchangeable controller. The STM32F070C6T6 includes full-speed USB, while alternatives in the same footprint may differ in USB availability, flash capacity, peripheral multiplexing, startup behavior, and firmware support. Before approving a substitution, compare the exact pin-description table, clock tree, interrupt mapping, USB implementation, memory configuration, and device-specific errata, then run the existing firmware on the candidate board.

Separate USB signaling from analog or sensitive measurement paths and provide a continuous ground reference beneath the routed pair. Place the USB connector, protection components, and MCU interface in a direct signal path. Use a common low-impedance ground-plane strategy so return current does not cross sensitive divider or sensor-reference areas. Validate signal integrity with the intended cable, host, supply configuration, and enclosure because connector and harness details can materially affect full-speed USB performance.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status are not established by the manufacturer product-page extract for this exact orderable MPN.

Data disahkan pada: 2026-11-15 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

STM32F070C6T6 datasheet STM32F070C6T6 pinout STM32F070C6T6 datasheet pdf STM32F070C6T6 equivalent STM32F070C6T6 replacement STM32F070C6T6 vs STM32F030C6T6 STM32F070C6T6 price STM32F070C6T6 stock STMicroelectronics STM32F070C6T6 STM32F070C6 48MHz Cortex-M0 STM32F070C6 32KB Flash LQFP48 STM32F070C6 USB application circuit STM32F070C6T6 drop-in replacement STM32F070C6T6 cross reference

Komponen dan Tanda berkaitan

STMicroelectronics STM32F070C6T6 STM32F070C6 STM32F030C6T6 STM32F031C6T6 STM32F070C8T6 STM32F072C6T6 STM32F072C8T6 Arm Arm Cortex-M0 32-bit RISC STM32F0 microcontroller embedded controller semiconductor USB 2.0 full-speed USB device USB PHY embedded DP pull-up battery-charging detection Battery Charging Specification Revision 1.2 48-LQFP LQFP package family surface mount RoHS REACH
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ