STM32F070F6P6 - 48MHz Cortex-M0 USB MCU | STMicroelectronics
MPN: STM32F070F6P6 ✓ AktifSTM32F070F6P6 Ringkasan
A microcontroller is a programmable semiconductor device that integrates a processor core, memory, and peripherals into one package. The STM32F0 family belongs to the hierarchy of embedded processors, 32-bit microcontrollers, Arm Cortex-M devices, and power-efficient embedded control ICs. Its compact package makes the STM32F070F6P6 suitable for space-constrained products requiring a conventional GPIO-based control architecture and USB device connectivity.
The principal features include an Arm Cortex-M0 processor core operating at 48 MHz, 32 KB of Flash for program storage, and 6 KB of SRAM for working memory. USB support allows the device to operate as a USB-connected peripheral in control, configuration, or data-acquisition equipment. The 20-pin TSSOP package also supports compact PCB layouts while providing sufficient I/O for common control signals.
The STM32F0 architecture balances processing capability with low system complexity. Its 32-bit Arm Cortex-M0 core uses a reduced instruction set optimized for embedded control, while the 32 KB Flash region is sufficient for compact boot code, application firmware, and peripheral configuration. The 6 KB SRAM supports buffering and real-time control workloads without requiring an external memory device for modest data requirements.
Typical applications include USB-enabled industrial controls, compact data-acquisition devices, PC peripheral interfaces, programmable logic controllers, instrument-control panels, and low-cost USB-to-digital or USB-to-analog interface products. The device is especially relevant when a design requires USB connectivity and a 48 MHz control loop in a small 20-pin package.
PCB design should preserve the power, ground, decoupling, and signal-routing requirements specified by the manufacturer datasheet. Place the device's required decoupling capacitors close to the appropriate supply pins, route USB data as a controlled impedance differential pair, and confirm all peripheral assignments against the package pin table before releasing the layout.
This product page combines the manufacturer's device information with practical engineering guidance for firmware integration, USB implementation, PCB layout, and component selection. It also provides a structured comparison with nearby STM32F0 and STM32G0 devices to support redesign and second-source decisions.
Pilihan pengganti yang segera untuk STM32F070F6P6 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera STM32F070F6P6 (sama faktor bentuk dan kaki) — berbeza dalam Flash Memory, Package, SRAM, Core, Operating Temperature.
STM32F031F6P7
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
STM32F050F6P7
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
STM32G030F6P6TR
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →STM32F070F6P6TR
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
STM32F070F6P6 Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 32-bit Microcontroller |
| Processor Core | Arm Cortex-M0 |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 32 KB (32K x 8) |
| SRAM | 6 KB |
| USB Support | Yes |
| Operating Supply Range | 2.5 V to 3.3 V |
| Architecture | 32-bit RISC |
| Kemasan | 20-pin TSSOP |
| Package Body Width | 4.40 mm |
| Kiraan Pin | 20 pins |
| Jenis Pemasangan | Surface Mount |
| Moisture Sensitivity Level | MSL 3 |
| Status RoHS | Compliant |
Panduan Konfigurasi Pin STM32F070F6P6 4.40 mm
Konfigurasi pin untuk STM32F070F6P6 (4.40 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk STM32F070F6P6.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
STM32F070F6P6 patut untuk 6 aplikasis: USB Industrial Control, USB Data Acquisition, PC Peripheral Interface, Programmable Logic Controller, Instrument Control Panel, USB Communication Module.
USB Industrial Control
The STM32F070F6P6 fits compact USB-enabled industrial controllers because its 48 MHz Cortex-M0 core can execute real-time control logic while USB provides a direct host connection. The 32 KB Flash accommodates compact firmware, and the 6 KB SRAM is sufficient for control variables, communication buffers, and peripheral state. Place the MCU between the USB connector and the controlled sensor or actuator interface, then implement enumeration, control transfers, and protection in firmware. Confirm the device's exact USB pin functions, transceiver requirements, clock configuration, and grounding arrangement in the manufacturer datasheet before routing the differential data path.
Disebarkan
USB Data Acquisition
The STM32F070F6P6 is suitable for a compact USB data-acquisition front end when the application needs moderate processing speed and a small controller package. Its 48 MHz Arm Cortex-M0 core can service digital inputs, sampling control, status reporting, and USB transfers, while 6 KB of SRAM supports acquisition buffers and working state. The 32 KB Flash provides room for protocol, calibration, and application code on a dense board. Validate ADC characteristics, sampling requirements, external signal conditioning, and USB enumeration behavior against the manufacturer documentation before assigning analog and digital functions.
Disebarkan
PC Peripheral Interface
The STM32F070F6P6 works well in a small PC peripheral that exchanges configuration or status data over USB and performs local control functions. The USB-capable Cortex-M0 platform avoids a separate communication controller, while the 20-pin TSSOP package leaves board area for connectors and interface circuitry. A typical design assigns USB data and control signals, uses the Cortex-M0 core for command parsing, and drives LEDs, relays, sensors, or digital outputs through GPIO. Review USB suspend, power-state, clock, and bus-routing requirements in the manufacturer datasheet, and provide the required local decoupling and controlled-impedance routing.
Disebarkan
Programmable Logic Controller
The STM32F070F6P6 can serve as the controller in a compact PLC or dedicated machine-control module when the application does not require more than 32 KB of program memory. Its 48 MHz Cortex-M0 core supports deterministic digital sequencing, while GPIO and embedded peripherals provide the interface to inputs, outputs, and communications. The 6 KB SRAM is adequate for moderate state storage and communication buffers. Before selecting the device, calculate firmware utilization, peripheral count, timing margins, and interrupt requirements. Use the manufacturer datasheet's pin, electrical, and peripheral tables to finalize the controller schematic.
Disebarkan
Instrument Control Panel
The STM32F070F6P6 is appropriate for an instrument control panel that combines local button or rotary-control handling with a USB management interface. Its 48 MHz processing capacity allows the firmware to scan inputs, update display commands, and manage host communication without a separate processor. The 32 KB Flash supports a compact control application, and the 20-pin TSSOP package simplifies integration into dense panel hardware. Verify whether the required display, communication, and analog functions fit the available pins. Firmware should handle debouncing, state changes, fault reporting, and USB suspend behavior, while the PCB maintains clean separation between sensitive and switching signals.
Disebarkan
USB Communication Module
The STM32F070F6P6 is well suited to a dedicated USB communication module that translates host commands into embedded-system actions. The USB interface removes the need for a separate bridge controller, while the Cortex-M0 core processes commands and manages device state. Its 32 KB Flash and 6 KB SRAM are adequate for compact protocol stacks and application handlers when the firmware footprint is controlled. A practical implementation uses the MCU beside the USB connector, local decoupling, configuration pins, and an optional status interface. Confirm transceiver connection details, supported USB modes, clock settings, and power requirements in the manufacturer datasheet before finalizing the circuit.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk STM32F070F6P6 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | STM32F031F6P7 | STM32F050F6P7 | STM32G030F6P6TR | STM32F070F6P6TR |
|---|---|---|---|---|---|
| Package | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Processor Core | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0+ | Arm Cortex-M0 |
| Maximum CPU Frequency | 48 MHz | 48 MHz | 48 MHz | 64 MHz | 48 MHz |
| Flash Memory | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| SRAM | 6 KB | 8 KB | 4 KB | 8 KB | 6 KB |
| USB Support | Yes | Yes | No | Yes | Yes |
| Operating Supply Range | 2.5 V to 3.3 V | 2.5 V to 3.3 V | 2.5 V to 3.3 V | 2.5 V to 3.3 V | 2.5 V to 3.3 V |
| Automotive Qualification | Not applicable | Not applicable | Not applicable | Not applicable | Not applicable |
Penyeberangsung Jelas
- Combines USB connectivity with a compact 20-pin TSSOP footprint (vsSTM32F050F6P7)
- Maintains the established STM32F0 Cortex-M0 platform (vsSTM32G030F6P6TR)
- Provides 6 KB of SRAM for a balance of working memory and footprint (vsSTM32F050F6P7)
- Matches the core frequency and Flash capacity of the closest STM32F0 alternatives (vsSTM32F031F6P7)
Catatan Desain
Place the required input and output capacitors directly beside their associated supply pins, and keep the USB D+ and D- traces short, length-matched, and referenced to a continuous ground plane. Route these differential nets away from switching nodes and high-current return paths. Before fabrication, compare the schematic pin assignments with the 20-pin TSSOP land pattern and check that the USB transceiver and clock connections match the manufacturer pin-description table.
Design the board around a stable 3.3 V supply within the documented 2.5 V to 3.3 V operating range. Confirm startup and brownout behavior, USB bus-power requirements, and the maximum operating current for the selected configuration. Separate analog, digital, and USB return paths where practical, and use the manufacturer application diagram as the basis for decoupling placement rather than relying on general-purpose supply-layout conventions.
Do not treat a shared TSSOP footprint as proof of complete drop-in equivalence. The STM32F031F6P7, STM32F050F6P7, and STM32G030F6P6TR use different feature combinations, memory capacities, clock behavior, or processor architectures. Before replacing the STM32F070F6P6, verify USB mode and pin mapping, peripheral availability, interrupt vectors, startup code, linker memory regions, clock initialization, and all electrical limits.
Keep sensitive analog and communication traces away from the MCU and USB connector when layout permits, and provide a quiet ground reference for the USB data pair. Match the USB trace geometry to the board's calculated stack-up impedance rather than using an arbitrary rule of thumb. Include accessible test points for supply, ground, reset, boot, clock, and USB signals to simplify firmware bring-up and production diagnostics.
Maklumat Kesediaan
RoHS compliance and MSL 3 are identified in the published component documentation. AEC-Q100 status is not applicable to the standard industrial STM32F070F6P6 ordering code.