STMicroelectronics

STM32F070F6P6 - 48MHz Cortex-M0 USB MCU | STMicroelectronics

MPN: STM32F070F6P6 ✓ פעיל
2.5 V to 3.3 V Vdss 20-pin TSSOP Package 48 MHz Speed 32 KB (32K x 8) Memory
כמות הזמנה מינימלית: 1 |

STM32F070F6P6 סקירה

The STMicroelectronics STM32F070F6P6 is a 32-bit Arm Cortex-M0 microcontroller operating at 48 MHz, with 32 KB of Flash memory, 6 KB of SRAM, and USB support in a 20-pin TSSOP package. It is designed for compact embedded systems that need efficient control, connectivity, and peripheral integration without requiring a large pin count.

A microcontroller is a programmable semiconductor device that integrates a processor core, memory, and peripherals into one package. The STM32F0 family belongs to the hierarchy of embedded processors, 32-bit microcontrollers, Arm Cortex-M devices, and power-efficient embedded control ICs. Its compact package makes the STM32F070F6P6 suitable for space-constrained products requiring a conventional GPIO-based control architecture and USB device connectivity.

The principal features include an Arm Cortex-M0 processor core operating at 48 MHz, 32 KB of Flash for program storage, and 6 KB of SRAM for working memory. USB support allows the device to operate as a USB-connected peripheral in control, configuration, or data-acquisition equipment. The 20-pin TSSOP package also supports compact PCB layouts while providing sufficient I/O for common control signals.

The STM32F0 architecture balances processing capability with low system complexity. Its 32-bit Arm Cortex-M0 core uses a reduced instruction set optimized for embedded control, while the 32 KB Flash region is sufficient for compact boot code, application firmware, and peripheral configuration. The 6 KB SRAM supports buffering and real-time control workloads without requiring an external memory device for modest data requirements.

Typical applications include USB-enabled industrial controls, compact data-acquisition devices, PC peripheral interfaces, programmable logic controllers, instrument-control panels, and low-cost USB-to-digital or USB-to-analog interface products. The device is especially relevant when a design requires USB connectivity and a 48 MHz control loop in a small 20-pin package.

PCB design should preserve the power, ground, decoupling, and signal-routing requirements specified by the manufacturer datasheet. Place the device's required decoupling capacitors close to the appropriate supply pins, route USB data as a controlled impedance differential pair, and confirm all peripheral assignments against the package pin table before releasing the layout.

This product page combines the manufacturer's device information with practical engineering guidance for firmware integration, USB implementation, PCB layout, and component selection. It also provides a structured comparison with nearby STM32F0 and STM32G0 devices to support redesign and second-source decisions.

חלופות תחליף ישיר עבור STM32F070F6P6 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם STM32F070F6P6 (אותו גורם צורה וטביעת רגל) — שונים ב Flash Memory, Package, SRAM, Core, Operating Temperature.

STMicroelectronics
Flash Memory: 16 KB (16K x 8)
Core: ARM Cortex-M0
Operating Temperature: -40 °C to +85 °C
השווה עם STM32F070F6P6 →
STMicroelectronics
Package: 20-TSSOP
SRAM: 8 KB (with HW parity)
Core: Arm Cortex-M0+
השווה עם STM32F070F6P6 →

STM32F031F6P7

✅ Drop-In
📦 20-pin TSSOP
Shares the 48 MHz Cortex-M0 architecture and 20-pin TSSOP footprint; USB capability and family-specific peripheral resources require verification.

📋 חלופה להתייחסות (לא בקטלוג)

STM32F050F6P7

✅ Drop-In
📦 20-pin TSSOP
Uses the same 48 MHz Cortex-M0 platform and 20-pin TSSOP footprint, but does not provide the same USB feature set as the STM32F070F6P6.

📋 חלופה להתייחסות (לא בקטלוג)

STM32G030F6P6TR

✅ Drop-In
STMicroelectronics
📦 20-pin TSSOP
Arm Cortex-M0+ · 64 MHz · 32 KB (32K x 8) · 8 KB (with HW parity) · 2.0 V to 3.6 V · 20-TSSOP · Surface Mount · 1 (Standard, Fast, Fast-mode Plus up to 1 Mbit/s)

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

STM32F070F6P6TR

✅ Drop-In
📦 20-pin TSSOP
Retains the same Cortex-M0 core, 48 MHz operation, 32 KB Flash, 6 KB SRAM, and 20-pin TSSOP specifications; only the order packing suffix differs.

📋 חלופה להתייחסות (לא בקטלוג)

STM32F070F6P6 דירוגים מרביים ומאפיינים חשמליים

Product Type 32-bit Microcontroller
Processor Core Arm Cortex-M0
Maximum CPU Frequency 48 MHz
Flash Memory 32 KB (32K x 8)
SRAM 6 KB
USB Support Yes
Operating Supply Range 2.5 V to 3.3 V
Architecture 32-bit RISC
מארז 20-pin TSSOP
Package Body Width 4.40 mm
מספר פינים 20 pins
סוג הרכבה Surface Mount
Moisture Sensitivity Level MSL 3
סטטוס RoHS Compliant

מדריך תצורת פינים של STM32F070F6P6 4.40 mm

תצורת פינים עבור STM32F070F6P6 (מארזת 4.40 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 4.40 mm עבור STM32F070F6P6

אין נתוני פריסת פינים מפורטים עבור STM32F070F6P6.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

STM32F070F6P6 מתאים עבור 6 יישוםs: USB Industrial Control, USB Data Acquisition, PC Peripheral Interface, Programmable Logic Controller, Instrument Control Panel, USB Communication Module.

🏭

USB Industrial Control

The STM32F070F6P6 fits compact USB-enabled industrial controllers because its 48 MHz Cortex-M0 core can execute real-time control logic while USB provides a direct host connection. The 32 KB Flash accommodates compact firmware, and the 6 KB SRAM is sufficient for control variables, communication buffers, and peripheral state. Place the MCU between the USB connector and the controlled sensor or actuator interface, then implement enumeration, control transfers, and protection in firmware. Confirm the device's exact USB pin functions, transceiver requirements, clock configuration, and grounding arrangement in the manufacturer datasheet before routing the differential data path.

🖥️

USB Data Acquisition

The STM32F070F6P6 is suitable for a compact USB data-acquisition front end when the application needs moderate processing speed and a small controller package. Its 48 MHz Arm Cortex-M0 core can service digital inputs, sampling control, status reporting, and USB transfers, while 6 KB of SRAM supports acquisition buffers and working state. The 32 KB Flash provides room for protocol, calibration, and application code on a dense board. Validate ADC characteristics, sampling requirements, external signal conditioning, and USB enumeration behavior against the manufacturer documentation before assigning analog and digital functions.

🖥️

PC Peripheral Interface

The STM32F070F6P6 works well in a small PC peripheral that exchanges configuration or status data over USB and performs local control functions. The USB-capable Cortex-M0 platform avoids a separate communication controller, while the 20-pin TSSOP package leaves board area for connectors and interface circuitry. A typical design assigns USB data and control signals, uses the Cortex-M0 core for command parsing, and drives LEDs, relays, sensors, or digital outputs through GPIO. Review USB suspend, power-state, clock, and bus-routing requirements in the manufacturer datasheet, and provide the required local decoupling and controlled-impedance routing.

🏭

Programmable Logic Controller

The STM32F070F6P6 can serve as the controller in a compact PLC or dedicated machine-control module when the application does not require more than 32 KB of program memory. Its 48 MHz Cortex-M0 core supports deterministic digital sequencing, while GPIO and embedded peripherals provide the interface to inputs, outputs, and communications. The 6 KB SRAM is adequate for moderate state storage and communication buffers. Before selecting the device, calculate firmware utilization, peripheral count, timing margins, and interrupt requirements. Use the manufacturer datasheet's pin, electrical, and peripheral tables to finalize the controller schematic.

🔧

Instrument Control Panel

The STM32F070F6P6 is appropriate for an instrument control panel that combines local button or rotary-control handling with a USB management interface. Its 48 MHz processing capacity allows the firmware to scan inputs, update display commands, and manage host communication without a separate processor. The 32 KB Flash supports a compact control application, and the 20-pin TSSOP package simplifies integration into dense panel hardware. Verify whether the required display, communication, and analog functions fit the available pins. Firmware should handle debouncing, state changes, fault reporting, and USB suspend behavior, while the PCB maintains clean separation between sensitive and switching signals.

🌐

USB Communication Module

The STM32F070F6P6 is well suited to a dedicated USB communication module that translates host commands into embedded-system actions. The USB interface removes the need for a separate bridge controller, while the Cortex-M0 core processes commands and manages device state. Its 32 KB Flash and 6 KB SRAM are adequate for compact protocol stacks and application handlers when the firmware footprint is controlled. A practical implementation uses the MCU beside the USB connector, local decoupling, configuration pins, and an optional status interface. Confirm transceiver connection details, supported USB modes, clock settings, and power requirements in the manufacturer datasheet before finalizing the circuit.

סיכום מוצרים מומלצים

STM32G030F6P6TR STMicroelectronics בשימוש ב-: USB Industrial Control, USB Data Acquisition, PC Peripheral Interface, Instrument Control Panel, USB Communication Module STM32F031F6P7 Nearby STM32F0 microcontroller in the same package family בשימוש ב-: USB Industrial Control, PC Peripheral Interface, Programmable Logic Controller, Instrument Control Panel STM32F050F6P7 Nearby value-line controller for acquisition-oriented designs בשימוש ב-: USB Data Acquisition, Programmable Logic Controller, USB Communication Module
What are the key specifications of STM32F070F6P6 that engineers should know?
The STM32F070F6P6 is a 48 MHz, 32-bit Arm Cortex-M0 microcontroller with 32 KB of Flash, 6 KB of SRAM, USB support, and a 20-pin TSSOP package. According to the STMicroelectronics STM32F070F6 product documentation, the device is based on the STM32F0 value-line architecture and combines a 48 MHz processor core with USB connectivity. These characteristics make it suitable for compact control systems, data-acquisition products, instrument interfaces, and USB peripheral designs.
Does the STM32F070F6P6 support USB?
Yes, the STM32F070F6P6 includes USB support for USB-connected embedded applications. The STMicroelectronics product page identifies USB capability within the STM32F070F6 family, while the distributor specification describes the device as an Arm Cortex-M0 value-line MCU with USB. Firmware development must configure the relevant clocks, GPIO alternate functions, USB peripheral, and transceiver connections according to the manufacturer datasheet before enumeration can begin.
What is the operating voltage of STM32F070F6P6?
The STM32F070F6P6 operates from 2.5 V to 3.3 V. The published device specifications identify the microcontroller as a 2.5 V and 3.3 V component. The board design should therefore provide a stable 3.3 V rail, include the required local decoupling, and keep analog, digital, and USB-related return currents within the grounding scheme recommended by the manufacturer datasheet.
How much memory does the STM32F070F6P6 have?
The STM32F070F6P6 provides 32 KB of Flash memory and 6 KB of SRAM. According to the STMicroelectronics STM32F070F6 family documentation, the 32 KB Flash is organized as 32K x 8 bits and supports embedded firmware storage. The 6 KB SRAM provides working memory for control state, buffers, stack operations, and peripheral data handling in compact USB-enabled embedded products.
Where can I download the STM32F070F6P6 datasheet PDF?
The STM32F070F6P6 datasheet PDF is available through the official STMicroelectronics product and technical-document resources for the STM32F070F6 family. Use the manufacturer datasheet for the authoritative pin descriptions, electrical limits, clock requirements, memory map, USB implementation, and recommended application circuits. The manufacturer product page links into ST's technical documentation and is the appropriate starting point for revisions of the device documentation.
Where can I find the STM32F070F6P6 pinout?
The STM32F070F6P6 pinout is published in the pin-description section of the STMicroelectronics manufacturer datasheet. The component uses a 20-pin TSSOP package, so pin assignments must be mapped directly to the corresponding package drawing. Use the manufacturer pin table when assigning power pins, ground pins, GPIO, oscillator connections, programming interfaces, and USB signals rather than inferring positions from a generic package illustration.
Where can I buy STM32F070F6P6 online?
Use the Request a Quote form on this page to request STM32F070F6P6 pricing, availability, and lead time for the exact 20-pin TSSOP ordering code. The form allows the requested quantity and shipment requirements to be communicated without relying on a static distributor price. Confirm the manufacturer, exact MPN, package, packing option, and lifecycle status in the quotation response before releasing a purchase order.
What is the price of STM32F070F6P6?
The current unit pricing and volume pricing for STM32F070F6P6 are obtained through the Request a Quote form on this page. Submit the required quantity and, if applicable, the preferred packing method to receive a current quotation for the exact MPN. This approach keeps the commercial response tied to current inventory, lead time, and order quantity rather than publishing a price that may already have changed.
What is the lead time for STM32F070F6P6?
The current lead time for STM32F070F6P6 should be requested through the Request a Quote form on this page. Include the required order quantity, tube or other permitted packing preference, target delivery date, and shipment destination. The resulting quotation can confirm available production allocation and the expected delivery schedule for the exact STM32F070F6P6 ordering code.
Is STM32F070F6P6 in stock?
Current STM32F070F6P6 stock status is available through the Request a Quote form on this page. Submit the required quantity and packing preference for an inventory and lead-time response. For new production designs, also review the manufacturer lifecycle information and avoid treating a temporary market listing as proof of long-term production availability.
STM32F070F6P6 vs STM32F031F6P7 - which is better for a USB design?
Choose the STM32F070F6P6 when the design specifically benefits from the STM32F070 family feature set and requires USB in a compact 20-pin TSSOP design. The STM32F031F6P7 is the closer family-oriented alternative, but its detailed USB, clock, peripheral, and firmware requirements should be checked against the original design. According to the comparison documentation, package-family compatibility alone does not establish that every peripheral function is identical.
STM32F070F6P6 vs STM32G030F6P6TR - which is better for a new control design?
The STM32F070F6P6 is the appropriate choice when an established STM32F0 design, its software ecosystem, and its 48 MHz Cortex-M0 platform are priorities. The STM32G030F6P6TR is a newer Cortex-M0+ option in the same 20-pin TSSOP footprint and may suit a greenfield design after peripheral, clock, pin-function, and firmware migration checks. According to STMicroelectronics family documentation and the published comparison data, the two families are not automatically interchangeable in software or timing behavior.
When should I choose STM32F070F6P6 over STM32F050F6P7?
Choose the STM32F070F6P6 when the application requires USB connectivity or the additional STM32F070-family resources needed by the design. The STM32F050F6P7 remains a relevant alternative for cost-sensitive USB-free projects after its memory, peripheral, and electrical limits are verified. According to the family comparison, both devices use the 48 MHz Cortex-M0 platform and a 20-pin TSSOP package, but feature availability and memory resources determine the final selection.
Is STM32F070F6P6 suitable for industrial control and USB data acquisition?
Yes, the STM32F070F6P6 suits compact industrial-control and USB data-acquisition products when the application fits its 32 KB Flash, 6 KB SRAM, GPIO count, and 48 MHz processing capacity. Its USB support enables a direct PC connection, while the Cortex-M0 core handles real-time sampling and control tasks. Confirm analog-channel requirements, USB electrical implementation, operating-temperature limits, and firmware size in the manufacturer datasheet.
What can replace STM32F070F6P6?
The closest documented drop-in candidates are STM32F031F6P7, STM32F050F6P7, and STM32G030F6P6TR, all associated with the STM32F0 or STM32G0 families and the 20-pin TSSOP format. None should be treated as an automatic firmware-compatible substitution. Review USB availability, memory size, peripheral mapping, interrupt behavior, clock tree, electrical limits, and startup code before approving a replacement.
Is STM32G030F6P6TR the same as STM32F070F6P6?
No, the STM32G030F6P6TR is related but not identical to the STM32F070F6P6. It uses a Cortex-M0+ core and belongs to the newer STM32G0 family, whereas the STM32F070F6P6 uses a Cortex-M0 core from the STM32F0 family. The 20-pin TSSOP footprint supports board-level substitution, but USB features, timing, peripheral functions, register organization, and firmware must be revalidated before production use.

נתוני עזר הנדסיים עבור STM32F070F6P6 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the STM32F070F6P6 when a compact design needs USB connectivity, a 48 MHz Arm Cortex-M0 core, 32 KB of Flash, and 6 KB of SRAM in a 20-pin TSSOP package. It is particularly suitable for USB industrial controls, data-acquisition fronts ends, PC peripherals, and compact instrumentation. Choose the STM32F031F6P7 when its family-specific resources satisfy the design and USB support remains essential. Choose the STM32F050F6P7 for a USB-free design that fits its 4 KB SRAM and peripheral configuration. Consider the STM32G030F6P6TR for a greenfield Cortex-M0+ design needing its newer timing and power-management features, but budget for firmware and peripheral validation. The STM32F070F6P6TR preserves the target device's electrical and functional characteristics, so select it when its permitted packing format matches the assembly process.

השוואה עם חלופות

פרמטר מוצר זה STM32F031F6P7 STM32F050F6P7 STM32G030F6P6TR STM32F070F6P6TR
Package 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Processor Core Arm Cortex-M0 Arm Cortex-M0 Arm Cortex-M0 Arm Cortex-M0+ Arm Cortex-M0
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz 64 MHz 48 MHz
Flash Memory 32 KB 32 KB 32 KB 32 KB 32 KB
SRAM 6 KB 8 KB 4 KB 8 KB 6 KB
USB Support Yes Yes No Yes Yes
Operating Supply Range 2.5 V to 3.3 V 2.5 V to 3.3 V 2.5 V to 3.3 V 2.5 V to 3.3 V 2.5 V to 3.3 V
Automotive Qualification Not applicable Not applicable Not applicable Not applicable Not applicable

מבדילים עיקריים

  • Combines USB connectivity with a compact 20-pin TSSOP footprint (לעומתSTM32F050F6P7)
  • Maintains the established STM32F0 Cortex-M0 platform (לעומתSTM32G030F6P6TR)
  • Provides 6 KB of SRAM for a balance of working memory and footprint (לעומתSTM32F050F6P7)
  • Matches the core frequency and Flash capacity of the closest STM32F0 alternatives (לעומתSTM32F031F6P7)

הערות תכנון

Place the required input and output capacitors directly beside their associated supply pins, and keep the USB D+ and D- traces short, length-matched, and referenced to a continuous ground plane. Route these differential nets away from switching nodes and high-current return paths. Before fabrication, compare the schematic pin assignments with the 20-pin TSSOP land pattern and check that the USB transceiver and clock connections match the manufacturer pin-description table.

Design the board around a stable 3.3 V supply within the documented 2.5 V to 3.3 V operating range. Confirm startup and brownout behavior, USB bus-power requirements, and the maximum operating current for the selected configuration. Separate analog, digital, and USB return paths where practical, and use the manufacturer application diagram as the basis for decoupling placement rather than relying on general-purpose supply-layout conventions.

Do not treat a shared TSSOP footprint as proof of complete drop-in equivalence. The STM32F031F6P7, STM32F050F6P7, and STM32G030F6P6TR use different feature combinations, memory capacities, clock behavior, or processor architectures. Before replacing the STM32F070F6P6, verify USB mode and pin mapping, peripheral availability, interrupt vectors, startup code, linker memory regions, clock initialization, and all electrical limits.

Keep sensitive analog and communication traces away from the MCU and USB connector when layout permits, and provide a quiet ground reference for the USB data pair. Match the USB trace geometry to the board's calculated stack-up impedance rather than using an arbitrary rule of thumb. Include accessible test points for supply, ground, reset, boot, clock, and USB signals to simplify firmware bring-up and production diagnostics.

מידע על תאימות

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

RoHS compliance and MSL 3 are identified in the published component documentation. AEC-Q100 status is not applicable to the standard industrial STM32F070F6P6 ordering code.

הנתונים אומתו בתאריך: 2026-11-15 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

stm32f070f6p6 usb STM32F070F6P6 datasheet STM32F070F6P6 datasheet pdf STM32F070F6P6 pinout STM32F070F6P6 specifications STM32F070F6P6 price STM32F070F6P6 stock STM32F070F6P6 equivalent STM32F070F6P6 replacement STM32F070F6P6 vs STM32F031F6P7 STM32F070F6P6 vs STM32G030F6P6TR STMicroelectronics STM32F070F6P6 STM32F070F6 TSSOP 20 application circuit STM32F070F6P6 cross reference

רכיבים ומונחים קשורים

STMicroelectronics STM32F070F6P6 STM32F031F6P7 STM32F050F6P7 STM32G030F6P6TR STM32F070F6P6TR Arm Cortex-M0 Arm Cortex-M0+ 32-bit microcontroller embedded control USB USB device controller STM32F0 STM32G0 32 KB Flash memory 6 KB SRAM 48 MHz clock 20-pin TSSOP TSSOP package family surface mount industrial control USB data acquisition PC peripheral programmable logic controller Moisture Sensitivity Level 3
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר