STM32F765NGH6 - 216MHz Cortex-M7 MCU | STMicroelectronics
MPN: STM32F765NGH6 ✓ AktifSTM32F765NGH6 Ringkasan
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces onto one package. The STM32F7 family belongs to the Arm Cortex-M microcontroller hierarchy, combining real-time embedded control, low-power operation, and extensive digital and analog peripherals. The STM32F765NGH6 is positioned for applications requiring greater processing throughput, external memory connectivity, and high-speed communications than typical entry-level Cortex-M devices.
The verified manufacturer data identifies an Arm Cortex-M7 32-bit RISC core, a maximum operating frequency of 216 MHz, and 1 MB of flash. The family documentation states a score of up to 462 DMIPS. Its 216-pin TFBGA package exposes substantially more I/O than smaller leaded packages, allowing simultaneous use of communications, control, analog, and memory interfaces. Operating voltage is listed as 3.3 V, while detailed RAM, peripheral, temperature, and timing limits require confirmation in the manufacturer datasheet.
Typical application areas include industrial automation, networked embedded equipment, data acquisition, human-machine interfaces, motor and motion control, and connected control systems. Its 216 MHz Cortex-M7 performance supports real-time signal processing and higher-level control tasks, while the large package provides extensive pin availability. Designers should confirm peripheral assignments, power requirements, and board-level interface support against the exact STM32F765NGH6 datasheet before layout release.
A critical design consideration is BGA assembly. The 13 x 13 mm TFBGA package requires a PCB with suitable escape routing, via-in-pad or via-under-ball construction where appropriate, appropriate copper thermal and power distribution, and a manufacturing process capable of inspecting the solder joints. A fine-pitch MCU also benefits from short, properly referenced clock and high-speed signal paths.
This page consolidates verified manufacturer and distributor facts, exact package information, commercial availability data, and same-family replacement candidates. It also distinguishes verified specifications from parameters that still require datasheet confirmation, helping engineers make a more reliable sourcing and design decision without treating generic STM32 family data as part-specific evidence.
Pilihan pengganti yang segera untuk STM32F765NGH6 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera STM32F765NGH6 (sama faktor bentuk dan kaki) — berbeza dalam Flash Memory, Package, CPU Architecture, Product Type.
STM32F745NGH6
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
STM32F746NGH6
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan✗ Stok Habis
$18.2955 / Unit
Lihat Datasheet →STM32F767NGH6
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →STM32F769NGH6
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
STM32F765NGH6 Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 32-bit microcontroller |
| Processor Core | Arm Cortex-M7 |
| CPU Architecture | 32-bit RISC |
| Maximum CPU Frequency | 216 MHz |
| Flash Memory | 1 MB |
| Flash Organization | 1M x 8 bits |
| Operating Voltage | 3.3 V |
| Kemasan | 216-TFBGA (13 x 13 mm) |
| Kiraan Pin | 216 pins |
| Packaging | Tray |
| Instruction Performance | Up to 462 DMIPS |
| Firmware Processor | FPU and DSP |
| Product Family | STM32F765xx |
| RoHS Compliance | unknown |
Panduan Konfigurasi Pin STM32F765NGH6 216-tfbga (13 x 13 mm)
Konfigurasi pin untuk STM32F765NGH6 (216-tfbga (13 x 13 mm) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk STM32F765NGH6.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
STM32F765NGH6 patut untuk 6 aplikasis: Industrial Automation Controllers, Connected Data Acquisition Systems, Motor and Motion Control, Human-Machine Interfaces, Networked Embedded Equipment, Portable Test and Measurement Instruments.
Industrial Automation Controllers
The STM32F765NGH6 fits industrial automation controllers that combine real-time sampling, communications, and supervisory logic. Its 216 MHz Arm Cortex-M7 core provides processing capacity for control algorithms, while FPU and DSP capability supports arithmetic-heavy signal processing. The verified 216-pin TFBGA also provides a large number of connections for encoders, digital I/O, communications, and analog-control interfaces. The 1 MB flash capacity is suitable for substantial firmware, drivers, and protocol stacks. Before schematic release, engineers should verify timer counts, communication peripherals, operating temperature, and safety requirements in the exact manufacturer datasheet.
Disebarkan
Connected Data Acquisition Systems
The STM32F765NGH6 is well matched to connected data-acquisition equipment where samples must be processed locally and transferred through one or more digital interfaces. Its Cortex-M7 processor can execute acquisition, filtering, buffering, and protocol tasks at up to 216 MHz, reducing dependence on an external processor. The 1 MB flash provides room for firmware and communication stacks, while the 216-TFBGA exposes many I/O options. Exact converter interfaces, timer channels, USB or Ethernet support, memory interfaces, and accuracy-related specifications are not present in the supplied evidence and must be checked before circuit design.
Disebarkan
Motor and Motion Control
The STM32F765NGH6 can serve as the real-time controller in a motor-drive, servo, or motion-control design. At up to 216 MHz, the Cortex-M7 core can execute current-control loops and supervisory functions, while its DSP and FPU capabilities benefit common filtering and transformation workloads. The large 216-pin package offers more I/O than small microcontroller packages, making it practical to distribute pulse-width-modulation outputs, capture inputs, position sensors, and communications. Designers must verify the required timer features, analog channels, encoder interfaces, PWM frequency, and control-loop timing in the manufacturer datasheet.
Disebarkan
Human-Machine Interfaces
The STM32F765NGH6 is suitable for human-machine interface controllers requiring responsive graphics or display-side logic alongside communications and control functions. Its 216 MHz Cortex-M7 core can manage interface state, input handling, communications, and application logic, while FPU and DSP support is useful for graphical and signal-processing workloads. The 1 MB flash can hold interface firmware and protocol code, and the 216-TFBGA offers numerous available contacts. However, the supplied data does not identify a display controller or supported graphics interface, so developers must confirm LCD, touch, camera, and external memory requirements before selecting the part.
Disebarkan
Networked Embedded Equipment
The STM32F765NGH6 can be used in connected embedded equipment requiring a high-performance control core and extensive peripheral connectivity. Its Cortex-M7 architecture operates up to 216 MHz, providing ample performance for protocol processing, local control, and real-time tasks, while the 1 MB flash supports a larger embedded codebase than many small-format MCUs. The 216-pin TFBGA provides a broad pin budget for network interfaces, status indicators, sensors, and local I/O. Ethernet MAC, USB, CAN, and other communications details are not established by the supplied search snippets and must be verified directly in the STM32F765xx documentation.
Disebarkan
Portable Test and Measurement Instruments
The STM32F765NGH6 is applicable to portable test and measurement products that combine sensor acquisition, numerical processing, display handling, and data transfer. The 216 MHz Cortex-M7 core with FPU and DSP capability supports fast filtering and control, while 1 MB flash provides storage for firmware, calibration data, and communication stacks. Its 216-TFBGA package makes external converters, precision interfaces, and communications accessible without relying on a very small package. Engineers must validate analog inputs, ADC performance, reference accuracy, timing, power budget, and battery-related requirements using the exact datasheet because those values were not included in the verified snippets.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk STM32F765NGH6 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | STM32F745NGH6 | STM32F746NGH6 | STM32F767NGH6 | STM32F769NGH6 |
|---|---|---|---|---|---|
| Package | 216-TFBGA (13 x 13 mm) | 216-TFBGA (13 x 13 mm) | 216-TFBGA (13 x 13 mm) | 216-TFBGA (13 x 13 mm) | 216-TFBGA (13 x 13 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Processor Core | Arm Cortex-M7, 32-bit RISC | Arm Cortex-M7, 32-bit RISC | Arm Cortex-M7, 32-bit RISC | Arm Cortex-M7, 32-bit RISC | Arm Cortex-M7, 32-bit RISC |
| Maximum Frequency | 216 MHz | 216 MHz | 216 MHz | 216 MHz | 216 MHz |
Penyeberangsung Jelas
- High-frequency Cortex-M7 processing (vsSTM32F745NGH6)
- Large-pin-count package for interface-rich designs (vsSTM32F746NGH6)
- Documented 1 MB embedded flash (vsSTM32F767NGH6)
Catatan Desain
The STM32F765NGH6 uses a 216-pin TFBGA in a 13 x 13 mm body. Confirm the manufacturer ball map and escape-routing strategy before schematic-to-layout conversion. Coordinate the PCB assembler early because fine-pitch BGA assembly can require via-in-pad structures, appropriate solder-mask and paste design, and inspection coverage. Do not rely on a generic BGA symbol because power, ground, and special-function balls must follow the exact datasheet.
Use the verified 3.3 V operating supply only with a regulator and decoupling plan that satisfies the manufacturer's voltage, current, sequencing, and transient requirements. The supplied data does not include the full electrical limits or recommended capacitor values, so those values must be taken from the official datasheet. Place bulk and high-frequency decoupling close to the relevant supply and ground balls, and verify the complete power budget under worst-case processor activity.
The small 13 x 13 mm TFBGA requires careful thermal design because high-performance Cortex-M7 operation can create localized heating. Provide uninterrupted ground-plane connections beneath and around the device, use thermal vias where the package guidance permits them, and minimize copper voids. Ambient temperature, junction-temperature limits, and package thermal data were not supplied, so the thermal analysis must use the manufacturer values rather than generic estimates.
Keep clock and other high-speed interfaces short, route them over continuous reference planes, and observe manufacturer guidance for decoupling and return paths. The verified evidence does not identify the external-memory or communications interfaces for this exact ordering code, so their voltage, timing, impedance, and topology requirements must be checked in the STM32F765xx datasheet before PCB sign-off.
Maklumat Kesediaan
The supplied verified snippets do not contain explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations for this exact ordering code. These fields remain unknown rather than being inferred from the manufacturer name or family.