STMicroelectronics

STM32G431CBY6TR - 170MHz Cortex-M4 128KB MCU | STMicroelectronics

MPN: STM32G431CBY6TR ✓ Aktif
49-WLCSP, 3.15 mm x 3.13 mm Package 170 MHz Speed 128 KB (128K x 8 bits) Memory
MOQ: 1 |

STM32G431CBY6TR Ringkasan

The STMicroelectronics STM32G431CBY6TR is a 170 MHz Arm Cortex-M4 microcontroller with FPU, math accelerator, 128 KB of Flash memory, and 32 KB of SRAM in a 49-WLCSP package measuring 3.15 mm by 3.13 mm. It combines 213 DMIPS processing performance with a compact package intended for space-constrained embedded systems.

A microcontroller is a programmable semiconductor that integrates a CPU, memory, peripherals, and communication interfaces on one device. The STM32G4 family belongs to the broader embedded-controller hierarchy: Arm Cortex-M4 core, 32-bit microcontroller, embedded processing IC, and semiconductor. This product combines general-purpose control with enhanced analog and math capabilities in an area-efficient surface-mount package.

The STM32G431CBY6TR operates at up to 170 MHz and provides 128 KB of Flash plus 32 KB of SRAM. Its Arm Cortex-M4 core includes a floating-point unit, while the on-chip math accelerator supports computational workloads that benefit from hardware acceleration. The 49-WLCSP format reduces PCB footprint compared with larger leaded microcontroller packages, making the device suitable for compact control boards.

The STM32G431 family provides rich analog peripherals according to the manufacturer datasheet. These resources can support industrial control, sensor acquisition, motor-control, power-conversion, and communications-oriented designs. The Cortex-M4 instruction set and FPU also provide a conventional embedded development path for control loops and signal-processing functions that do not require a higher-power application processor.

Typical uses include industrial sensor hubs, compact motor controllers, digital power modules, condition-monitoring equipment, and connected measurement instruments. In each case, the 170 MHz core provides processing margin, the 128 KB Flash supports firmware and configuration data, and the small WLCSP footprint supports dense board layouts.

PCB design requires careful attention to the WLCSP ball pitch, exposed-pad requirements, power routing, and decoupling. Confirm the exact ball map and recommended land pattern in the STMicroelectronics datasheet before routing, and reserve adequate copper and thermal management around the device. Firmware validation should also cover clock startup, peripheral pin multiplexing, and analog calibration.

This product page combines core specifications, practical application guidance, package considerations, and same-package replacement candidates for engineers evaluating the STM32G431CBY6TR. It is designed to accelerate schematic assignment, PCB footprint review, firmware preparation, and sourcing decisions without replacing the manufacturer’s complete technical documentation.

Pilihan pengganti yang segera untuk STM32G431CBY6TR — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera STM32G431CBY6TR (sama faktor bentuk dan kaki) — berbeza dalam Math Accelerator, Package, SRAM.

STMicroelectronics
Math Accelerator: CORDIC + FMAC hardware
Package: 48-pin UFQFPN (7x7 mm)
SRAM: 32 KB (plus 4 KB CCM-SRAM)
Bandingkan Dengan STM32G431CBY6TR →

STM32G431CBU6TR

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 49-WLCSP (3.15 mm x 3.13 mm)
Temperature-grade order code differs; core frequency changes by 0 MHz at 170 MHz, Flash changes by 0 KB at 128 KB, and SRAM changes by 0 KB at 32 KB

📋 Alternatif rujukan (tidak dalam katalog)

STM32G431CBU6

✅ Masuk Drop-In
STMicroelectronics
📦 49-WLCSP (3.15 mm x 3.13 mm)
Arm Cortex-M4F with FPU and DSP instructions · 170 MHz · 213 DMIPS · 128 KB · 32 KB (plus 4 KB CCM-SRAM) · 1.71 V to 3.6 V · -40 C to +85 C (grade 6) · 48-pin UFQFPN (7x7 mm)

Hubungi untuk harga

Lihat Datasheet →

STM32G431CBY3TR

✅ Masuk Drop-In
STMicroelectronics
📦 49-WLCSP (3.15 mm x 3.13 mm)
32-bit ARM Cortex-M4 Microcontroller · Arm Cortex-M4 with FPU · 170 MHz · 213 DMIPS · 128 KB · 128 KB (128K x 8 bits) · 32 KB · 32-bit

Hubungi untuk harga

Lihat Datasheet →

STM32G431CBY3

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 49-WLCSP (3.15 mm x 3.13 mm)
Lower temperature-grade order code and non-tape-and-reel ordering form; core frequency changes by 0 MHz at 170 MHz, Flash changes by 0 KB at 128 KB, and SRAM changes by 0 KB at 32 KB

📋 Alternatif rujukan (tidak dalam katalog)

STM32G431CBU3TR

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 49-WLCSP (3.15 mm x 3.13 mm)
Temperature-grade order code differs; core frequency changes by 0 MHz at 170 MHz, Flash changes by 0 KB at 128 KB, and SRAM changes by 0 KB at 32 KB

📋 Alternatif rujukan (tidak dalam katalog)

STM32G431CBY6TR Penilaian maksimum & Ciri-ciri Elektrik

Product Type 32-bit ARM Cortex-M4 microcontroller
Maximum CPU Frequency 170 MHz
Core Architecture Arm Cortex-M4 with FPU
Peak Performance 213 DMIPS
Flash Memory 128 KB (128K x 8 bits)
SRAM 32 KB
Math Accelerator On-chip hardware math accelerator
Kemasan 49-WLCSP, 3.15 mm x 3.13 mm
Pin or Ball Count 49 balls
Jenis Pemasangan Surface mount

Panduan Konfigurasi Pin STM32G431CBY6TR 49-wlcsp, 3.15 mm x 3.13 mm

Konfigurasi pin untuk STM32G431CBY6TR (49-wlcsp, 3.15 mm x 3.13 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 49-wlcsp, 3.15 mm x 3.13 mm untuk STM32G431CBY6TR

Tiada data garisan pin yang diperoleh untuk STM32G431CBY6TR.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

STM32G431CBY6TR patut untuk 6 aplikasis: Industrial Sensor and Condition Monitoring, Compact Motor Control, Digital Power Conversion Control, Precision Measurement Equipment, Industrial Communication Gateway, Connected Test and Measurement.

🏭

Industrial Sensor and Condition Monitoring

The STM32G431CBY6TR fits compact condition-monitoring controllers that sample analog sensors, apply filtering, and maintain local control functions. Its 170 MHz Arm Cortex-M4 core provides processing margin for sensor fusion and diagnostic logic, while the hardware FPU supports calculations commonly encountered in vibration and thermal analysis. The 128 KB Flash accommodates firmware, calibration constants, and reference tables, and 32 KB of SRAM provides working space for acquisition buffers. Its 49-WLCSP footprint is particularly useful when the controller must fit beside a sensor array without dominating board area.

⚡

Compact Motor Control

The STM32G431CBY6TR is suitable for compact motor-control modules requiring fast control-loop execution and mixed signal and digital functions. Its 170 MHz Cortex-M4 core and hardware math accelerator can support current-loop calculations, commutation logic, and protection sequencing, while the floating-point unit assists with less intensive numeric operations. The 128 KB Flash is sufficient for embedded control firmware and parameter storage, and the 32 KB SRAM can support control variables and diagnostic data. The compact 49-WLCSP package also reduces the footprint available for power stages and sensors.

⚡

Digital Power Conversion Control

The STM32G431CBY6TR can serve as the supervisory controller in a digital power-conversion design, especially where the system needs a combination of control-loop performance and analog peripherals. The 170 MHz Cortex-M4 processor provides bandwidth for PWM-related control, state estimation, and supervisory functions, while the math accelerator accelerates eligible mathematical operations. Its 128 KB Flash and 32 KB SRAM accommodate control tables, calibration, and runtime state. The 49-WLCSP package is advantageous in power modules where available board area is limited but robust thermal and layout work is essential.

🔧

Precision Measurement Equipment

The STM32G431CBY6TR is appropriate for precision measurement instruments that combine data acquisition, calibration, communications, and local display or control functions. Its Cortex-M4 FPU supports real-time numeric processing, and the on-chip math accelerator can improve throughput for supported mathematical workloads. With 128 KB Flash and 32 KB SRAM, the device has useful capacity for embedded firmware, calibration coefficients, and acquisition data. The small 49-WLCSP footprint helps reduce instrument size, although analog layout, reference stability, and grounding remain central to achieving accurate measurements.

🌐

Industrial Communication Gateway

The STM32G431CBY6TR can form the control core of a compact industrial communication gateway that translates between field interfaces and an embedded host. The 170 MHz Cortex-M4 core provides capacity for protocol processing and system management, while 128 KB Flash supports gateway firmware and configuration storage. Its 32 KB SRAM supports message handling and communication buffers. The 49-WLCSP package helps achieve a dense gateway design. Selection of Ethernet, serial, or other interface components remains application-specific, and the communication interface list should be checked against the manufacturer datasheet.

🖥️

Connected Test and Measurement

The STM32G431CBY6TR fits compact automated test equipment where an embedded controller must orchestrate measurements, perform calculations, and exchange results with a host. Its 170 MHz Cortex-M4 core and FPU are useful for real-time filtering and numerical routines, while the hardware math accelerator handles suitable math operations. The 128 KB Flash can retain test programs and configuration, and 32 KB of SRAM can accommodate samples and intermediate values. The compact WLCSP package reduces controller footprint, but test accuracy still depends on carefully designed analog channels, references, and PCB isolation.

What is the STM32G431CBY6TR?
The STM32G431CBY6TR is a 170 MHz Arm Cortex-M4 32-bit microcontroller with FPU, math accelerator, 128 KB of Flash, and 32 KB of SRAM. According to the STMicroelectronics STM32G431x6/STM32G431x8/STM32G431xB datasheet, it reaches 213 DMIPS and is packaged in a compact 49-WLCSP measuring 3.15 mm by 3.13 mm.
How much Flash memory and SRAM does the STM32G431CBY6TR have?
The STM32G431CBY6TR provides 128 KB of Flash memory organized as 128K by 8 bits and 32 KB of SRAM. According to the STMicroelectronics STM32G431x6/STM32G431x8/STM32G431xB datasheet, this capacity supports embedded firmware, configuration tables, working data, and stack space within a compact control system.
What is the maximum clock frequency of STM32G431CBY6TR?
The STM32G431CBY6TR operates at up to 170 MHz and delivers a peak performance of 213 DMIPS. According to the STMicroelectronics STM32G431x6/STM32G431x8/STM32G431xB datasheet, the Arm Cortex-M4 core includes a floating-point unit, while the integrated math accelerator accelerates suitable mathematical operations.
What package does the STM32G431CBY6TR use?
The STM32G431CBY6TR uses a 49-WLCSP surface-mount package measuring 3.15 mm by 3.13 mm. The STMicroelectronics product listing identifies the package and its ball count, while the manufacturer datasheet provides the authoritative ball map and land-pattern requirements needed for PCB layout.
Where can I download the STM32G431CBY6TR datasheet PDF?
The official STM32G431CBY6TR datasheet PDF is available from STMicroelectronics at https://www.st.com/resource/en/datasheet/stm32g431c6.pdf. The document covers the STM32G431x6, STM32G431x8, and STM32G431xB families and should be used for the electrical characteristics, pin definitions, package drawings, and application information.
Where can I find the STM32G431CBY6TR pinout and WLCSP land pattern?
The STM32G431CBY6TR pinout and recommended land pattern are in the pin-definition and package-information sections of the STMicroelectronics STM32G431x6/STM32G431x8/STM32G431xB datasheet. Use its 49-ball assignment when assigning signals and do not infer the layout solely from the 3.15 mm by 3.13 mm package dimensions.
What can replace the STM32G431CBY6TR?
The closest same-family replacement candidates are STM32G431CBU6TR, STM32G431CBU6, STM32G431CBY3TR, STM32G431CBY3, and STM32G431CBU3TR. Each uses the 49-WLCSP format and retains the 170 MHz Cortex-M4, 128 KB Flash, and 32 KB SRAM configuration, but temperature-grade ordering codes and production conditions should be checked before substitution.
Is STM32G431CBY6TR a drop-in replacement for STM32G431CBY3TR?
The STM32G431CBY6TR is a pin-compatible same-package candidate for STM32G431CBY3TR because both use the 49-WLCSP format and share the 170 MHz Cortex-M4, 128 KB Flash, and 32 KB SRAM configuration. The order-code temperature grade differs, so verify the required ambient range and qualification conditions before approving the substitution.
Is STM32G431CBU6 a drop-in replacement for STM32G431CBY6TR?
The STM32G431CBU6 is a same-package, pin-compatible candidate for STM32G431CBY6TR, with the same 170 MHz Cortex-M4 core, 128 KB Flash, and 32 KB SRAM. Its order-code suffix indicates a different temperature-grade configuration, so it is suitable as a drop-in candidate only when that grade covers the required operating conditions.
When should I choose STM32G431CBY6TR instead of STM32G431CBU6TR?
Choose the STM32G431CBY6TR when the design requires its specific temperature-grade order code, while STM32G431CBU6TR is acceptable when the U6 grade meets the environmental requirements. Both retain the same 49-WLCSP footprint, 170 MHz Cortex-M4 core, 128 KB Flash, and 32 KB SRAM, so PCB and software migration is straightforward.
What is the best STMicroelectronics equivalent for STM32G431CBY6TR?
The closest STMicroelectronics equivalent is STM32G431CBU6TR because it retains the same 49-WLCSP package, 170 MHz Arm Cortex-M4 core, 128 KB Flash, 32 KB SRAM, FPU, and math accelerator. The principal decision is the order-code temperature grade rather than core or memory capacity, and the required ambient range must be confirmed.
Is STM32G431CBY6TR suitable for motor-control and digital power applications?
The STM32G431CBY6TR is suitable for compact motor-control and digital power designs that benefit from its 170 MHz Cortex-M4 core, FPU, hardware math accelerator, and rich analog resources. The manufacturer describes the STM32G431 family as combining a Cortex-M4 MCU with rich analog and math acceleration for demanding embedded applications.
What are the key specifications of STM32G431CBY6TR that engineers should know?
The key specifications are a 170 MHz Arm Cortex-M4 core, 213 DMIPS peak performance, FPU, hardware math accelerator, 128 KB Flash, 32 KB SRAM, and a 49-WLCSP package measuring 3.15 mm by 3.13 mm. These figures come from the STMicroelectronics family datasheet and establish the device’s compute, memory, and board-space capabilities.
Where can I buy STM32G431CBY6TR and check current lead time?
Use the Request a Quote form on this page to request STM32G431CBY6TR availability, current lead time, order quantity, and delivery requirements. The manufacturer lists the part for direct ordering, and the Request a Quote workflow avoids presenting a potentially stale stock status or fixed commercial figure.
What is the price of STM32G431CBY6TR?
Current STM32G431CBY6TR pricing should be requested through the Request a Quote form on this page. The commercial offer can reflect quantity, packaging, delivery location, and current inventory conditions, allowing the buyer to receive a current quotation rather than relying on a historical catalog amount.
Is STM32G431CBY6TR currently in stock?
Current STM32G431CBY6TR stock should be confirmed through the Request a Quote form on this page. Availability can change with regional inventory and order volume, so confirm the quantity and delivery schedule when requesting a quotation instead of relying on a distributor search result.
Does STM32G431CBY6TR meet RoHS and automotive qualification requirements?
RoHS, REACH, and AEC-Q100 status must be confirmed for the exact order code before release. The manufacturer family documentation should be consulted for material and environmental declarations, while an AEC-Q100-qualified ordering option should be selected when automotive qualification is a mandatory design requirement.

Data referensi kejuruteraan untuk STM32G431CBY6TR — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the STM32G431CBY6TR when the design requires the Y6 temperature grade and benefits from 170 MHz Cortex-M4 performance, an FPU, a hardware math accelerator, 128 KB Flash, and 32 KB SRAM in a 49-WLCSP package. It is particularly suitable for compact industrial, motor-control, digital-power, measurement, and communications products. Select STM32G431CBU6TR or STM32G431CBU6 when the U6 grade satisfies the environmental requirements and the procurement configuration better matches the assembly process. Consider STM32G431CBY3TR or STM32G431CBY3 when the lower Y3 grade is adequate and may offer a different supply path. STM32G431CBU3TR is another same-footprint family option for designs covered by the U3 grade. Before replacing the target, verify the complete pin map, temperature range, qualification status, supply status, and firmware assumptions; package equality alone does not establish functional approval.

Perbandingan dengan Gantian

Parametr Produk Ini STM32G431CBU6TR STM32G431CBU6 STM32G431CBY3TR STM32G431CBY3 STM32G431CBU3TR
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 49-WLCSP (3.15 mm x 3.13 mm) 49-WLCSP (3.15 mm x 3.13 mm) 49-WLCSP (3.15 mm x 3.13 mm) 49-WLCSP (3.15 mm x 3.13 mm) 49-WLCSP (3.15 mm x 3.13 mm) 49-WLCSP (3.15 mm x 3.13 mm)
CPU Core Arm Cortex-M4 with FPU Arm Cortex-M4 with FPU Arm Cortex-M4 with FPU Arm Cortex-M4 with FPU Arm Cortex-M4 with FPU Arm Cortex-M4 with FPU
Maximum CPU Frequency 170 MHz 170 MHz 170 MHz 170 MHz 170 MHz 170 MHz
Peak Performance 213 DMIPS 213 DMIPS 213 DMIPS 213 DMIPS 213 DMIPS 213 DMIPS
Flash Memory 128 KB 128 KB 128 KB 128 KB 128 KB 128 KB
SRAM 32 KB 32 KB 32 KB 32 KB 32 KB 32 KB
Math Accelerator Yes Yes Yes Yes Yes Yes
Ordering-Code Temperature Grade Y6 order code U6 order code U6 order code Y3 order code Y3 order code U3 order code

Penyeberangsung Jelas

  • Combines a high-performance Cortex-M4 core with a compact 49-WLCSP footprint (vsSTM32G431CBU6TR)
  • Extended temperature-grade order code supports designs requiring the Y6 grade (vsSTM32G431CBY3TR)
  • Pin-compatible family transition without changing the PCB land pattern (vsSTM32G431CBU3TR)

Catatan Desain

Use the 49-ball pin map and recommended land pattern in the STMicroelectronics datasheet when routing the STM32G431CBY6TR. The 3.15 mm by 3.13 mm WLCSP has a much denser interconnect pattern than leaded packages, so inspect pad dimensions, solder-mask clearance, and courtyard boundaries in the PCB CAD library before release. Avoid substituting a generic QFN land pattern.

Place all required decoupling capacitors directly beside their associated power balls, with the shortest practical connection through low-impedance supply and ground planes. Separate sensitive analog supplies from digital return currents where the architecture allows it, and follow the manufacturer’s recommended capacitor values and startup sequence. Review the datasheet’s maximum supply and pin voltage limits against the complete power-tree design.

Treat the WLCSP solder mask and thermal behavior as a layout constraint rather than assuming that the small package dissipates little heat. Preserve the recommended ground-ball pattern and provide uninterrupted copper beneath and around the device where the package drawing permits it. Estimate worst-case junction temperature from actual switching and regulator dissipation, then verify it against the maximum operating temperature of the selected order code.

Do not treat same-package family variants as unconditional replacements. Although the listed candidates share the 49-WLCSP footprint and core, flash, SRAM, and clock configuration, their order-code temperature grades differ. Confirm the exact ambient range, pin mapping, qualification requirements, and programming documentation before substituting STM32G431CBU6, STM32G431CBY3, or related order codes.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

Compliance declarations must be confirmed for the exact STM32G431CBY6TR order code in the manufacturer’s current product and environmental documentation.

Pencarian Berhubungan

STM32G431CBY6TR STM32G431CBY6TR datasheet STM32G431CBY6TR datasheet pdf STM32G431CBY6TR pinout STM32G431CBY6TR footprint STM32G431CBY6TR equivalent STM32G431CBY6TR replacement STM32G431CBY6TR price STM32G431CBY6TR stock STMicroelectronics STM32G431CBY6TR STM32G431CBY6TR vs STM32G431CBU6TR STM32G431 49-WLCSP microcontroller STM32G431CBY6TR motor control STM32G431CBY6TR digital power What can replace STM32G431CBY6TR?

Komponen dan Tanda berkaitan

STMicroelectronics STM32G431CBY6TR STM32G431CBU6TR STM32G431CBU6 STM32G431CBY3TR STM32G431CBY3 STM32G431CBU3TR STM32G4 Arm Cortex-M4 ARM Cortex-M4 MCU 32-bit microcontroller microcontroller embedded processing IC semiconductor floating-point unit FPU math accelerator DMIPS Flash memory SRAM 49-WLCSP WLCSP family surface mount industrial control motor control digital power conversion condition monitoring precision measurement RoHS REACH AEC-Q100
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ