STM32G431CBY6TR - 170MHz Cortex-M4 128KB MCU | STMicroelectronics
MPN: STM32G431CBY6TR ✓ Hoạt độngSTM32G431CBY6TR Tóm tắt
A microcontroller is a programmable semiconductor that integrates a CPU, memory, peripherals, and communication interfaces on one device. The STM32G4 family belongs to the broader embedded-controller hierarchy: Arm Cortex-M4 core, 32-bit microcontroller, embedded processing IC, and semiconductor. This product combines general-purpose control with enhanced analog and math capabilities in an area-efficient surface-mount package.
The STM32G431CBY6TR operates at up to 170 MHz and provides 128 KB of Flash plus 32 KB of SRAM. Its Arm Cortex-M4 core includes a floating-point unit, while the on-chip math accelerator supports computational workloads that benefit from hardware acceleration. The 49-WLCSP format reduces PCB footprint compared with larger leaded microcontroller packages, making the device suitable for compact control boards.
The STM32G431 family provides rich analog peripherals according to the manufacturer datasheet. These resources can support industrial control, sensor acquisition, motor-control, power-conversion, and communications-oriented designs. The Cortex-M4 instruction set and FPU also provide a conventional embedded development path for control loops and signal-processing functions that do not require a higher-power application processor.
Typical uses include industrial sensor hubs, compact motor controllers, digital power modules, condition-monitoring equipment, and connected measurement instruments. In each case, the 170 MHz core provides processing margin, the 128 KB Flash supports firmware and configuration data, and the small WLCSP footprint supports dense board layouts.
PCB design requires careful attention to the WLCSP ball pitch, exposed-pad requirements, power routing, and decoupling. Confirm the exact ball map and recommended land pattern in the STMicroelectronics datasheet before routing, and reserve adequate copper and thermal management around the device. Firmware validation should also cover clock startup, peripheral pin multiplexing, and analog calibration.
This product page combines core specifications, practical application guidance, package considerations, and same-package replacement candidates for engineers evaluating the STM32G431CBY6TR. It is designed to accelerate schematic assignment, PCB footprint review, firmware preparation, and sourcing decisions without replacing the manufacturer’s complete technical documentation.
Bộ thay thế dễ dàng lắp đặt cho STM32G431CBY6TR — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với STM32G431CBY6TR (cùng hình factor và footprint) — khác nhau ở Math Accelerator, Package, SRAM.
STM32G431CBU6TR
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32G431CBU6
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →STM32G431CBY3TR
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →STM32G431CBY3
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32G431CBU3TR
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32G431CBY6TR Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Maximum CPU Frequency | 170 MHz |
| Core Architecture | Arm Cortex-M4 with FPU |
| Peak Performance | 213 DMIPS |
| Flash Memory | 128 KB (128K x 8 bits) |
| SRAM | 32 KB |
| Math Accelerator | On-chip hardware math accelerator |
| Hộp | 49-WLCSP, 3.15 mm x 3.13 mm |
| Pin or Ball Count | 49 balls |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân STM32G431CBY6TR 49-wlcsp, 3.15 mm x 3.13 mm
Cấu hình chân cho STM32G431CBY6TR (49-wlcsp, 3.15 mm x 3.13 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho STM32G431CBY6TR.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
STM32G431CBY6TR phù hợp cho 6 Áp dụngs: Industrial Sensor and Condition Monitoring, Compact Motor Control, Digital Power Conversion Control, Precision Measurement Equipment, Industrial Communication Gateway, Connected Test and Measurement.
Industrial Sensor and Condition Monitoring
The STM32G431CBY6TR fits compact condition-monitoring controllers that sample analog sensors, apply filtering, and maintain local control functions. Its 170 MHz Arm Cortex-M4 core provides processing margin for sensor fusion and diagnostic logic, while the hardware FPU supports calculations commonly encountered in vibration and thermal analysis. The 128 KB Flash accommodates firmware, calibration constants, and reference tables, and 32 KB of SRAM provides working space for acquisition buffers. Its 49-WLCSP footprint is particularly useful when the controller must fit beside a sensor array without dominating board area.
Được đề xuất
Compact Motor Control
The STM32G431CBY6TR is suitable for compact motor-control modules requiring fast control-loop execution and mixed signal and digital functions. Its 170 MHz Cortex-M4 core and hardware math accelerator can support current-loop calculations, commutation logic, and protection sequencing, while the floating-point unit assists with less intensive numeric operations. The 128 KB Flash is sufficient for embedded control firmware and parameter storage, and the 32 KB SRAM can support control variables and diagnostic data. The compact 49-WLCSP package also reduces the footprint available for power stages and sensors.
Được đề xuất
Digital Power Conversion Control
The STM32G431CBY6TR can serve as the supervisory controller in a digital power-conversion design, especially where the system needs a combination of control-loop performance and analog peripherals. The 170 MHz Cortex-M4 processor provides bandwidth for PWM-related control, state estimation, and supervisory functions, while the math accelerator accelerates eligible mathematical operations. Its 128 KB Flash and 32 KB SRAM accommodate control tables, calibration, and runtime state. The 49-WLCSP package is advantageous in power modules where available board area is limited but robust thermal and layout work is essential.
Được đề xuất
Precision Measurement Equipment
The STM32G431CBY6TR is appropriate for precision measurement instruments that combine data acquisition, calibration, communications, and local display or control functions. Its Cortex-M4 FPU supports real-time numeric processing, and the on-chip math accelerator can improve throughput for supported mathematical workloads. With 128 KB Flash and 32 KB SRAM, the device has useful capacity for embedded firmware, calibration coefficients, and acquisition data. The small 49-WLCSP footprint helps reduce instrument size, although analog layout, reference stability, and grounding remain central to achieving accurate measurements.
Được đề xuất
Industrial Communication Gateway
The STM32G431CBY6TR can form the control core of a compact industrial communication gateway that translates between field interfaces and an embedded host. The 170 MHz Cortex-M4 core provides capacity for protocol processing and system management, while 128 KB Flash supports gateway firmware and configuration storage. Its 32 KB SRAM supports message handling and communication buffers. The 49-WLCSP package helps achieve a dense gateway design. Selection of Ethernet, serial, or other interface components remains application-specific, and the communication interface list should be checked against the manufacturer datasheet.
Được đề xuất
Connected Test and Measurement
The STM32G431CBY6TR fits compact automated test equipment where an embedded controller must orchestrate measurements, perform calculations, and exchange results with a host. Its 170 MHz Cortex-M4 core and FPU are useful for real-time filtering and numerical routines, while the hardware math accelerator handles suitable math operations. The 128 KB Flash can retain test programs and configuration, and 32 KB of SRAM can accommodate samples and intermediate values. The compact WLCSP package reduces controller footprint, but test accuracy still depends on carefully designed analog channels, references, and PCB isolation.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho STM32G431CBY6TR — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | STM32G431CBU6TR | STM32G431CBU6 | STM32G431CBY3TR | STM32G431CBY3 | STM32G431CBU3TR |
|---|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 49-WLCSP (3.15 mm x 3.13 mm) | 49-WLCSP (3.15 mm x 3.13 mm) | 49-WLCSP (3.15 mm x 3.13 mm) | 49-WLCSP (3.15 mm x 3.13 mm) | 49-WLCSP (3.15 mm x 3.13 mm) | 49-WLCSP (3.15 mm x 3.13 mm) |
| CPU Core | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU |
| Maximum CPU Frequency | 170 MHz | 170 MHz | 170 MHz | 170 MHz | 170 MHz | 170 MHz |
| Peak Performance | 213 DMIPS | 213 DMIPS | 213 DMIPS | 213 DMIPS | 213 DMIPS | 213 DMIPS |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| SRAM | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| Math Accelerator | Yes | Yes | Yes | Yes | Yes | Yes |
| Ordering-Code Temperature Grade | Y6 order code | U6 order code | U6 order code | Y3 order code | Y3 order code | U3 order code |
Bảo phân biệt quan trọng
- Combines a high-performance Cortex-M4 core with a compact 49-WLCSP footprint (vsSTM32G431CBU6TR)
- Extended temperature-grade order code supports designs requiring the Y6 grade (vsSTM32G431CBY3TR)
- Pin-compatible family transition without changing the PCB land pattern (vsSTM32G431CBU3TR)
Ghi chú thiết kế
Use the 49-ball pin map and recommended land pattern in the STMicroelectronics datasheet when routing the STM32G431CBY6TR. The 3.15 mm by 3.13 mm WLCSP has a much denser interconnect pattern than leaded packages, so inspect pad dimensions, solder-mask clearance, and courtyard boundaries in the PCB CAD library before release. Avoid substituting a generic QFN land pattern.
Place all required decoupling capacitors directly beside their associated power balls, with the shortest practical connection through low-impedance supply and ground planes. Separate sensitive analog supplies from digital return currents where the architecture allows it, and follow the manufacturer’s recommended capacitor values and startup sequence. Review the datasheet’s maximum supply and pin voltage limits against the complete power-tree design.
Treat the WLCSP solder mask and thermal behavior as a layout constraint rather than assuming that the small package dissipates little heat. Preserve the recommended ground-ball pattern and provide uninterrupted copper beneath and around the device where the package drawing permits it. Estimate worst-case junction temperature from actual switching and regulator dissipation, then verify it against the maximum operating temperature of the selected order code.
Do not treat same-package family variants as unconditional replacements. Although the listed candidates share the 49-WLCSP footprint and core, flash, SRAM, and clock configuration, their order-code temperature grades differ. Confirm the exact ambient range, pin mapping, qualification requirements, and programming documentation before substituting STM32G431CBU6, STM32G431CBY3, or related order codes.
Thông tin tuân thủ
Compliance declarations must be confirmed for the exact STM32G431CBY6TR order code in the manufacturer’s current product and environmental documentation.