STMicroelectronics

STM32L011D4P7 - 32MHz 16KB Flash Cortex-M0+ MCU | STMicroelectronics

MPN: STM32L011D4P7 ✓ Aktif
1.8 V, 2.5 V or 3.3 V Vdss 14-pin TSSOP Package 32 MHz Speed 16 KB (16K x 8) Memory
MOQ: 1 |

STM32L011D4P7 Ringkasan

The STMicroelectronics STM32L011D4P7 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M0+ core, operating up to 32 MHz with 16 KB of Flash memory and housed in a 14-pin TSSOP package. It belongs to the STM32L0 access-line family, combining a compact footprint, low-power operation and a Cortex-M0+ instruction set for compact control systems.

A microcontroller is an integrated circuit that combines a processor core, program memory, data memory and peripheral interfaces into one programmable device. The STM32L0 family sits within the broader hierarchy of embedded processors, where the Cortex-M0+ core provides a small, efficient architecture for cost-sensitive control, sensing and communication applications.

The STM32L011D4P7 provides 16 KB of Flash memory and runs at up to 32 MHz. Its 14-TSSOP package is suitable for compact PCB layouts, while the STM32L011x3/4 family is positioned for low-power embedded applications. The exact RAM size, peripheral complement, voltage range and temperature limits require confirmation in the manufacturer datasheet.

The Cortex-M0+ core supports efficient control-oriented firmware rather than high-compute workloads. STM32L0 devices are commonly used for low-power sensor nodes, simple user interfaces, small motor-control functions and compact battery-powered products. The manufacturer describes the STM32L011x3/4 family as an access-line ultra-low-power family with reset and supply-management features.

Typical designs use the microcontroller to supervise sensors, drive indicators, manage a communications interface or sequence power rails. Designers should account for the device's operating voltage, peripheral requirements and pin multiplexing before laying out a board. The 14-pin TSSOP footprint should be checked against the exact pin assignment in the manufacturer datasheet.

The main engineering trade-off is that the STM32L011D4P7 prioritizes a small, low-power MCU with limited Flash capacity rather than a high-pin-count or high-memory device. Applications requiring larger firmware images, more GPIO or faster arithmetic may need another member of the STM32 family. This page focuses on the specified 14-TSSOP STM32L011D4P7 configuration and provides practical sourcing and design guidance.

This product summary combines the manufacturer product-page information, distributor technical listings and structured engineering guidance. It helps engineers confirm the 32 MHz Cortex-M0+ architecture, 16 KB Flash configuration, TSSOP package and low-power positioning before requesting a quote or beginning a schematic and PCB layout review.

Pilihan pengganti yang segera untuk STM32L011D4P7 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera STM32L011D4P7 (sama faktor bentuk dan kaki) — berbeza dalam Flash Memory, Package, Architecture, Product Type.

STMicroelectronics
Flash Memory: 8 KB (8K x 8)
Package: 14-TSSOP
Architecture: 32-bit RISC
Bandingkan Dengan STM32L011D4P7 →
STMicroelectronics
Flash Memory: 16 KB
Package: TSSOP-14
Bandingkan Dengan STM32L011D4P7 →

STM32L011D4P6

✅ Masuk Drop-In
STMicroelectronics
📦 14-TSSOP
32-bit ultra-low-power microcontroller · Arm Cortex-M0+ · 32 MHz · 16 KB (16K x 8) · 16K x 8 bits · 14-pin TSSOP · 14 pins · 12 GPIO pins

Hubungi untuk harga

Lihat Datasheet →

STM32L011D3P6

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
STMicroelectronics
📦 14-TSSOP
32-bit ultra-low-power microcontroller · Arm Cortex-M0+ · 32-bit RISC · 32 MHz · 8 KB (8K x 8) · 14-TSSOP · 14 pins

Hubungi untuk harga

Lihat Datasheet →

STM32L011D3P7

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 14-TSSOP
Same STM32L011 family and package footprint, with lower Flash capacity than the 16 KB STM32L011D4P7; the exact difference is approximately 25%

📋 Alternatif rujukan (tidak dalam katalog)

STM32L011D2P6

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 14-TSSOP
Same STM32L011 family and package footprint, with approximately 50% less Flash than the 16 KB STM32L011D4P7

📋 Alternatif rujukan (tidak dalam katalog)

STM32L011D2P7

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 14-TSSOP
Same STM32L011 family and package footprint, with approximately 50% less Flash than the 16 KB STM32L011D4P7

📋 Alternatif rujukan (tidak dalam katalog)

STM32L011D4P7 Penilaian maksimum & Ciri-ciri Elektrik

Product Type 32-bit microcontroller
Core Arm Cortex-M0+
Maximum CPU Frequency 32 MHz
Flash Memory 16 KB (16K x 8)
Architecture 32-bit
Family STM32L011x3/4
Series STM32L0
Product Positioning Access line ultra-low-power
Kemasan 14-pin TSSOP
Jenis Pemasangan Surface Mount
Supply Voltage Options 1.8 V, 2.5 V or 3.3 V
Status RoHS unknown
REACH Status unknown
AEC-Q100 Qualification unknown
Lead-Free Status unknown
Halogen-Free Status unknown

Panduan Konfigurasi Pin STM32L011D4P7 14-pin tssop

Konfigurasi pin untuk STM32L011D4P7 (14-pin tssop pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 14-pin tssop untuk STM32L011D4P7

Tiada data garisan pin yang diperoleh untuk STM32L011D4P7.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

STM32L011D4P7 patut untuk 6 aplikasis: Battery-Powered Sensor Node, Industrial Sensor Interface, Smart Home Sensor and Controller, Compact Data Acquisition Module, Low-Power IoT Endpoint, Embedded Control and Power Sequencing.

🔋

Battery-Powered Sensor Node

STM32L011D4P7 fits compact, battery-powered sensor nodes because it combines a 32-bit Arm Cortex-M0+ core, 16 KB of Flash and the STM32L011 family's ultra-low-power positioning. The 14-TSSOP package leaves more board area than a larger leaded or high-pin-count MCU. The device can sample sensors, run a light control loop and wake periodically from a low-power state. Because the verified snippets do not quantify active, sleep or standby current, engineers should review the manufacturer power-management tables before sizing the battery. Use the exact STM32L011D4P7 pin assignments and decoupling recommendations from the manufacturer datasheet when laying out the PCB.

🏭

Industrial Sensor Interface

STM32L011D4P7 is appropriate for small industrial sensor interfaces where a 32 MHz Cortex-M0+ core is sufficient for control logic but board space and power consumption matter. Its 16 KB of Flash supports compact firmware for conditioning, thresholding, status reporting and local diagnostics. The 14-TSSOP package can be placed on compact controller boards while preserving the same STM32L0 software ecosystem. Verify the exact operating-voltage limits, peripheral pin multiplexing and industrial temperature requirements in the manufacturer documentation. Production designs should also confirm EMC layout guidance and the required reset and supply-decoupling network.

🏠

Smart Home Sensor and Controller

STM32L011D4P7 can serve as the local controller in a smart-home sensor or actuator module because it provides 16 KB of Flash, a 32 MHz Cortex-M0+ processor and a compact 14-TSSOP footprint. The MCU can manage debounced inputs, LED indication, timing functions and a simple communications peripheral while keeping the board electrically manageable. Its ultra-low-power family positioning is beneficial for devices that spend most of their time idle. Exact UART, SPI or I2C availability and pin assignments should be checked against the device datasheet. Select external interface components with voltage levels and signal characteristics compatible with the chosen STM32L011D4P7 configuration.

📊

Compact Data Acquisition Module

STM32L011D4P7 is suitable for a compact data-acquisition front end when the application needs local control, buffering and status reporting rather than high-end signal processing. The 32 MHz Cortex-M0+ core can supervise an external ADC, maintain communication and execute configuration logic, while 16 KB of Flash constrains the firmware to a focused embedded workload. The 14-TSSOP package supports compact, surface-mount assembly. Use an ADC whose resolution, input range, interface and sampling requirements match the system, and budget firmware space carefully. The manufacturer datasheet must be used to confirm pin multiplexing, analog-support features and exact electrical limits before finalizing the schematic.

📡

Low-Power IoT Endpoint

STM32L011D4P7 is a practical fit for an IoT endpoint that performs local sensing and control before transmitting periodic results. The STM32L011 family's ultra-low-power positioning helps systems that spend substantial time between active events, while the 32 MHz Cortex-M0+ core handles protocol tasks and control logic. The 16 KB Flash limit makes efficient firmware organization important, especially when a network stack is included. Confirm the supported communication peripherals, low-power modes and wake-up sources in the manufacturer documentation. A compact 14-TSSOP layout also helps reduce board area, but antenna and radio isolation still require careful placement.

⚡

Embedded Control and Power Sequencing

STM32L011D4P7 can coordinate power sequencing, monitoring and fault handling in a small embedded-control system. Its 32 MHz Cortex-M0+ core is suitable for deterministic supervisory logic, and the STM32L011 family includes reset and supply-management features identified by the manufacturer. The 14-TSSOP package is practical for a compact control PCB with multiple status inputs and relay or indicator outputs. Use the pin description table to assign control and monitor functions, and add appropriate interface isolation for loads that exceed MCU GPIO limits. Before release, verify brownout behavior, reset timing, operating-temperature limits and the exact set of timers and communication interfaces required by the power system.

What are the key specifications of STM32L011D4P7 that engineers should know?
The STM32L011D4P7 is a 32-bit Arm Cortex-M0+ microcontroller with a maximum CPU frequency of 32 MHz, 16 KB of Flash memory and a 14-pin TSSOP package. The STM32L011x3/4 family is positioned as an access-line ultra-low-power family. RAM size, exact GPIO count and detailed timing limits should be confirmed in the manufacturer datasheet.
What is the operating voltage range of STM32L011D4P7?
The STM32L011D4P7 is identified in distributor listings as supporting 1.8 V, 2.5 V and 3.3 V supply options. Exact minimum and maximum voltage limits, including current consumption and power-management modes, are [DATA_NEEDED: complete operating voltage range] and should be checked in the manufacturer datasheet before schematic design.
Where can I find the STM32L011D4P7 datasheet and pinout?
The manufacturer product page for the STM32L011D4 family is available at https://www.st.com/en/microcontrollers-microprocessors/stm32l011d4.html. The verified results do not include a complete numbered pin description table, so use the package drawing and pin-definition section in the manufacturer datasheet when assigning the 14 TSSOP connections. The public listing confirms the 14-pin TSSOP package.
Where can I buy STM32L011D4P7 and what is the current lead time?
Use the Request a Quote form on this page to request current STM32L011D4P7 availability, order quantity and lead time from XAIPART. The verified distributor snippets confirm that the part is catalogued for ordering, but they do not provide a qualifying quantity-break price table or a guaranteed inventory quantity for this response.
How much does STM32L011D4P7 cost?
Current unit pricing for STM32L011D4P7 should be obtained through the Request a Quote form on this page. The verified listings identify the exact MPN and its 14-TSSOP configuration, but the retrieved content does not expose explicit quantity-break prices that can be copied accurately. Requesting a quote keeps the commercial response tied to the exact suffix and packaging configuration.
Is STM32L011D4P7 in stock?
Stock status for STM32L011D4P7 should be confirmed through the Request a Quote form on this page. A distributor listing alone does not establish current inventory, so engineers should request the exact MPN, tube packaging and required quantity. The target is the STM32L011D4P7 in 14-pin TSSOP form, not a related STM32L011 variant.
What can replace STM32L011D4P7?
The closest verified same-family candidate is STM32L011D4P6, which appears in a direct comparison with STM32L011D4P7. Other STM32L011-family devices may provide alternate Flash or temperature grades, but a safe replacement must retain the 14-TSSOP footprint and the required Cortex-M0+, memory, voltage and peripheral functions. Verify the exact suffix before approving a substitution.
Is STM32L011D4P7 the same as STM32L011D4P6?
STM32L011D4P7 and STM32L011D4P6 are related STM32L011D4 variants listed for direct comparison, but they are not automatically identical. The suffix difference can indicate a different qualification, temperature or ordering configuration, so confirm the manufacturer ordering-information table, electrical limits and package marking before treating one as a drop-in replacement for the other.
STM32L011D4P7 vs STM32L011D4P6 - which is better for a low-power sensor node?
Choose the STM32L011D4P7 when the design specification calls for that exact suffix, and choose STM32L011D4P6 when its documented qualification or commercial configuration better matches the product. Both belong to the STM32L011D4 family, but the retrieved comparison page does not expose the complete differentiating fields. Review the manufacturer ordering information and temperature-grade requirements before selection.
When should I choose STM32L011D4P7 over STM32L011D4P6?
Select STM32L011D4P7 when the BOM specifies that exact orderable part or when its documented suffix configuration provides the required lifecycle or qualification conditions. Select STM32L011D4P6 only after confirming that its electrical, temperature and ordering characteristics satisfy the same requirements. Both should be evaluated in the same 14-TSSOP footprint for a physical replacement.
Is STM32L011D4P7 suitable for battery-powered sensor applications?
STM32L011D4P7 is suitable for many battery-powered sensor-node designs because it belongs to STMicroelectronics' ultra-low-power STM32L011x3/4 access-line family and uses a compact 14-TSSOP package. The actual battery-life design depends on the selected operating mode, active current, sleep current, wake-up sources and peripheral activity, which are not quantified in the verified snippets.
What is the STM32L011D4P7 CPU architecture?
The STM32L011D4P7 uses a 32-bit Arm Cortex-M0+ processor core and reaches a maximum clock frequency of 32 MHz. The Cortex-M0+ architecture is intended for compact embedded control rather than workstation-class computation. Firmware designers should use a Cortex-M0+-compatible Arm toolchain and confirm peripheral definitions against the STM32Cube device support for STM32L011.
How much Flash memory does STM32L011D4P7 have?
STM32L011D4P7 has 16 KB of Flash memory, described by the distributor listing as 16K x 8. This capacity suits compact control firmware, but applications with large protocol stacks, graphical interfaces or extensive libraries should estimate linker-map memory use and startup-code overhead before selecting the device. RAM and EEPROM capacity are separate resources and must be checked independently.
Is STM32L011D4P7 RoHS compliant and automotive qualified?
The RoHS, REACH, lead-free, halogen-free and AEC-Q100 status of STM32L011D4P7 are unknown because the verified snippets do not state those compliance claims. Do not assume automotive qualification from the suffix alone. Request the current manufacturer product-page declarations or the relevant material-compliance documentation for the exact orderable MPN before releasing a regulated or automotive design.
How do I design a PCB around STM32L011D4P7?
Use the manufacturer's 14-pin TSSOP land pattern and follow the exact pin-description table when assigning power, ground, reset, clock and GPIO functions. Place required decoupling capacitors close to their associated supply pins, route the reset network away from noisy sources, and use a clean ground-return path. The verified data confirms the package but does not include a pin-by-pin layout, so consult the datasheet before fabrication.

Data referensi kejuruteraan untuk STM32L011D4P7 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose STM32L011D4P7 when the design needs the exact 16 KB-Flash STM32L011D4 configuration, a 32 MHz Arm Cortex-M0+ core and a compact 14-TSSOP footprint for a low-power embedded-control product. Choose STM32L011D4P6 when that suffix provides a better documented qualification or ordering configuration for the same D4 memory class, after confirming its temperature and suffix differences. Consider STM32L011D3 variants only when their lower Flash capacity is sufficient and can preserve firmware margin; the D3 configuration provides approximately 25% less Flash than the target. Lower-density D2 variants save memory but provide approximately 50% less Flash, making them suitable only for tightly bounded firmware. Every candidate must retain the 14-TSSOP footprint and satisfy the required supply voltage, temperature, peripheral and qualification constraints before release.

Perbandingan dengan Gantian

Parametr Produk Ini STM32L011D4P6 STM32L011D3P6 STM32L011D3P7 STM32L011D2P6 STM32L011D2P7
Package 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Product Family STM32L011x3/4 STM32L011x3/4 STM32L011x3/4 STM32L011x3/4 STM32L011x3/4 STM32L011x3/4
Application Positioning Access line ultra-low-power MCU Access line ultra-low-power MCU Access line ultra-low-power MCU Access line ultra-low-power MCU Access line ultra-low-power MCU Access line ultra-low-power MCU
Price Tier Request a Quote Request a Quote Request a Quote Request a Quote Request a Quote Request a Quote

Penyeberangsung Jelas

  • Higher Flash capacity than lower-density STM32L011 alternatives (vsSTM32L011D2P6)
  • 32 MHz Cortex-M0+ processing capability (vsSTM32L011D2P7)
  • Specific D4 configuration with 16 KB Flash (vsSTM32L011D3P6)

Catatan Desain

Use the manufacturer 14-pin TSSOP footprint and verify every net against the STM32L011D4P7 pin-definition table before routing. Place the required input and output decoupling capacitors close to the associated supply pins, keep the return path short and connect the exposed analog or reference functions exactly as specified. A footprint-compatible substitution is not sufficient if the alternate suffix changes peripheral mapping or qualification.

Estimated: the MCU's supply requirements should be calculated from the actual rail voltage, I/O loading and peripheral activity rather than from CPU frequency alone. Use the manufacturer operating-mode current tables to compare active, sleep, stop and standby consumption, then size the battery and regulator with margin for startup and peak load. No current values are asserted here because the verified snippets do not provide them.

Do not select a lower-Flash family member merely because it appears in the same 14-TSSOP footprint. STM32L011D4P7 provides 16 KB of Flash, while lower-density variants can reduce firmware headroom by roughly 25% or 50%. Confirm the linker map, bootloader requirements, stack usage and all peripheral assignments before approving a replacement.

Keep clock, reset and high-speed communication traces away from noisy switching nodes and maintain a continuous ground reference beneath the device where the package allows it. If the design includes RF communication, separate the antenna region from the MCU and sensitive analog paths. Use the manufacturer's reference schematic and layout guidance as the authority for final placement.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The verified product-page and distributor snippets do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free or conflict-minerals declarations. Confirm the current compliance documentation for the exact STM32L011D4P7 orderable part before production release.

Data disahkan pada: 2026-11-19 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

STM32L011D4P7 STM32L011D4P7 datasheet STM32L011D4P7 datasheet pdf STM32L011D4P7 pinout STM32L011D4P7 schematic STM32L011D4P7 equivalent STM32L011D4P7 replacement STM32L011D4P7 cross reference STM32L011D4P7 vs STM32L011D4P6 STM32L011D4P7 footprint STM32L011D4P7 price STM32L011D4P7 stock STMicroelectronics STM32L011D4P7 STM32L011D4 14-TSSOP pinout STM32L011D4 application circuit

Komponen dan Tanda berkaitan

STMicroelectronics STM32L011D4P7 STM32L011D4P6 STM32L011D3P6 STM32L011D3P7 STM32L011D2P6 STM32L011D2P7 Arm Cortex-M0+ microcontroller embedded processor semiconductor STM32L0 STM32L011x3/4 ultra-low-power MCU 14-TSSOP TSSOP package family surface-mount package 32-bit RISC core 16 KB Flash 32 MHz reset and supply management sensor node industrial control IoT endpoint
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ