STM32L011D4P7 - 32MHz 16KB Flash Cortex-M0+ MCU | STMicroelectronics
N.º da peça: STM32L011D4P7 ✓ AtivoSTM32L011D4P7 Visão geral
A microcontroller is an integrated circuit that combines a processor core, program memory, data memory and peripheral interfaces into one programmable device. The STM32L0 family sits within the broader hierarchy of embedded processors, where the Cortex-M0+ core provides a small, efficient architecture for cost-sensitive control, sensing and communication applications.
The STM32L011D4P7 provides 16 KB of Flash memory and runs at up to 32 MHz. Its 14-TSSOP package is suitable for compact PCB layouts, while the STM32L011x3/4 family is positioned for low-power embedded applications. The exact RAM size, peripheral complement, voltage range and temperature limits require confirmation in the manufacturer datasheet.
The Cortex-M0+ core supports efficient control-oriented firmware rather than high-compute workloads. STM32L0 devices are commonly used for low-power sensor nodes, simple user interfaces, small motor-control functions and compact battery-powered products. The manufacturer describes the STM32L011x3/4 family as an access-line ultra-low-power family with reset and supply-management features.
Typical designs use the microcontroller to supervise sensors, drive indicators, manage a communications interface or sequence power rails. Designers should account for the device's operating voltage, peripheral requirements and pin multiplexing before laying out a board. The 14-pin TSSOP footprint should be checked against the exact pin assignment in the manufacturer datasheet.
The main engineering trade-off is that the STM32L011D4P7 prioritizes a small, low-power MCU with limited Flash capacity rather than a high-pin-count or high-memory device. Applications requiring larger firmware images, more GPIO or faster arithmetic may need another member of the STM32 family. This page focuses on the specified 14-TSSOP STM32L011D4P7 configuration and provides practical sourcing and design guidance.
This product summary combines the manufacturer product-page information, distributor technical listings and structured engineering guidance. It helps engineers confirm the 32 MHz Cortex-M0+ architecture, 16 KB Flash configuration, TSSOP package and low-power positioning before requesting a quote or beginning a schematic and PCB layout review.
Alternativas drop-in para STM32L011D4P7 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com STM32L011D4P7 (mesmo formato e footprint) — diferindo em Flash Memory, Package, Architecture, Product Type.
STM32L011D4P6
✅ Drop-InConsulte o preço
Ver ficha técnica →STM32L011D3P6
✅ Drop-In ⚠️ Especificações não verificadasConsulte o preço
Ver ficha técnica →STM32L011D3P7
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
STM32L011D2P6
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
STM32L011D2P7
✅ Drop-In ⚠️ Especificações não verificadas📋 Alternativa de referência (fora do catálogo)
STM32L011D4P7 Classificações máximas e características elétricas
| Product Type | 32-bit microcontroller |
| Core | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 16 KB (16K x 8) |
| Architecture | 32-bit |
| Family | STM32L011x3/4 |
| Series | STM32L0 |
| Product Positioning | Access line ultra-low-power |
| Encapsulamento | 14-pin TSSOP |
| Tipo de montagem | Surface Mount |
| Supply Voltage Options | 1.8 V, 2.5 V or 3.3 V |
| Status RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
| Lead-Free Status | unknown |
| Halogen-Free Status | unknown |
Guia de Configuração de Pinos do STM32L011D4P7 14-pin tssop
Configuração de pinos para STM32L011D4P7 (pacote 14-pin tssop). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para STM32L011D4P7.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
STM32L011D4P7 é adequado para 6 aplicaçãos: Battery-Powered Sensor Node, Industrial Sensor Interface, Smart Home Sensor and Controller, Compact Data Acquisition Module, Low-Power IoT Endpoint, Embedded Control and Power Sequencing.
Battery-Powered Sensor Node
STM32L011D4P7 fits compact, battery-powered sensor nodes because it combines a 32-bit Arm Cortex-M0+ core, 16 KB of Flash and the STM32L011 family's ultra-low-power positioning. The 14-TSSOP package leaves more board area than a larger leaded or high-pin-count MCU. The device can sample sensors, run a light control loop and wake periodically from a low-power state. Because the verified snippets do not quantify active, sleep or standby current, engineers should review the manufacturer power-management tables before sizing the battery. Use the exact STM32L011D4P7 pin assignments and decoupling recommendations from the manufacturer datasheet when laying out the PCB.
Recomendado
Industrial Sensor Interface
STM32L011D4P7 is appropriate for small industrial sensor interfaces where a 32 MHz Cortex-M0+ core is sufficient for control logic but board space and power consumption matter. Its 16 KB of Flash supports compact firmware for conditioning, thresholding, status reporting and local diagnostics. The 14-TSSOP package can be placed on compact controller boards while preserving the same STM32L0 software ecosystem. Verify the exact operating-voltage limits, peripheral pin multiplexing and industrial temperature requirements in the manufacturer documentation. Production designs should also confirm EMC layout guidance and the required reset and supply-decoupling network.
Recomendado
Smart Home Sensor and Controller
STM32L011D4P7 can serve as the local controller in a smart-home sensor or actuator module because it provides 16 KB of Flash, a 32 MHz Cortex-M0+ processor and a compact 14-TSSOP footprint. The MCU can manage debounced inputs, LED indication, timing functions and a simple communications peripheral while keeping the board electrically manageable. Its ultra-low-power family positioning is beneficial for devices that spend most of their time idle. Exact UART, SPI or I2C availability and pin assignments should be checked against the device datasheet. Select external interface components with voltage levels and signal characteristics compatible with the chosen STM32L011D4P7 configuration.
Recomendado
Compact Data Acquisition Module
STM32L011D4P7 is suitable for a compact data-acquisition front end when the application needs local control, buffering and status reporting rather than high-end signal processing. The 32 MHz Cortex-M0+ core can supervise an external ADC, maintain communication and execute configuration logic, while 16 KB of Flash constrains the firmware to a focused embedded workload. The 14-TSSOP package supports compact, surface-mount assembly. Use an ADC whose resolution, input range, interface and sampling requirements match the system, and budget firmware space carefully. The manufacturer datasheet must be used to confirm pin multiplexing, analog-support features and exact electrical limits before finalizing the schematic.
Recomendado
Low-Power IoT Endpoint
STM32L011D4P7 is a practical fit for an IoT endpoint that performs local sensing and control before transmitting periodic results. The STM32L011 family's ultra-low-power positioning helps systems that spend substantial time between active events, while the 32 MHz Cortex-M0+ core handles protocol tasks and control logic. The 16 KB Flash limit makes efficient firmware organization important, especially when a network stack is included. Confirm the supported communication peripherals, low-power modes and wake-up sources in the manufacturer documentation. A compact 14-TSSOP layout also helps reduce board area, but antenna and radio isolation still require careful placement.
Recomendado
Embedded Control and Power Sequencing
STM32L011D4P7 can coordinate power sequencing, monitoring and fault handling in a small embedded-control system. Its 32 MHz Cortex-M0+ core is suitable for deterministic supervisory logic, and the STM32L011 family includes reset and supply-management features identified by the manufacturer. The 14-TSSOP package is practical for a compact control PCB with multiple status inputs and relay or indicator outputs. Use the pin description table to assign control and monitor functions, and add appropriate interface isolation for loads that exceed MCU GPIO limits. Before release, verify brownout behavior, reset timing, operating-temperature limits and the exact set of timers and communication interfaces required by the power system.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para STM32L011D4P7 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | STM32L011D4P6 | STM32L011D3P6 | STM32L011D3P7 | STM32L011D2P6 | STM32L011D2P7 |
|---|---|---|---|---|---|---|
| Package | 14-TSSOP | 14-TSSOP | 14-TSSOP | 14-TSSOP | 14-TSSOP | 14-TSSOP |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Product Family | STM32L011x3/4 | STM32L011x3/4 | STM32L011x3/4 | STM32L011x3/4 | STM32L011x3/4 | STM32L011x3/4 |
| Application Positioning | Access line ultra-low-power MCU | Access line ultra-low-power MCU | Access line ultra-low-power MCU | Access line ultra-low-power MCU | Access line ultra-low-power MCU | Access line ultra-low-power MCU |
| Price Tier | Request a Quote | Request a Quote | Request a Quote | Request a Quote | Request a Quote | Request a Quote |
Principais diferenciais
- Higher Flash capacity than lower-density STM32L011 alternatives (vs STM32L011D2P6)
- 32 MHz Cortex-M0+ processing capability (vs STM32L011D2P7)
- Specific D4 configuration with 16 KB Flash (vs STM32L011D3P6)
Notas de projeto
Use the manufacturer 14-pin TSSOP footprint and verify every net against the STM32L011D4P7 pin-definition table before routing. Place the required input and output decoupling capacitors close to the associated supply pins, keep the return path short and connect the exposed analog or reference functions exactly as specified. A footprint-compatible substitution is not sufficient if the alternate suffix changes peripheral mapping or qualification.
Estimated: the MCU's supply requirements should be calculated from the actual rail voltage, I/O loading and peripheral activity rather than from CPU frequency alone. Use the manufacturer operating-mode current tables to compare active, sleep, stop and standby consumption, then size the battery and regulator with margin for startup and peak load. No current values are asserted here because the verified snippets do not provide them.
Do not select a lower-Flash family member merely because it appears in the same 14-TSSOP footprint. STM32L011D4P7 provides 16 KB of Flash, while lower-density variants can reduce firmware headroom by roughly 25% or 50%. Confirm the linker map, bootloader requirements, stack usage and all peripheral assignments before approving a replacement.
Keep clock, reset and high-speed communication traces away from noisy switching nodes and maintain a continuous ground reference beneath the device where the package allows it. If the design includes RF communication, separate the antenna region from the MCU and sensitive analog paths. Use the manufacturer's reference schematic and layout guidance as the authority for final placement.
Informações de conformidade
The verified product-page and distributor snippets do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free or conflict-minerals declarations. Confirm the current compliance documentation for the exact STM32L011D4P7 orderable part before production release.