STMicroelectronics

STM32L011F3P6 - 32MHz Cortex-M0+ 8KB Flash MCU | ST

MPN: STM32L011F3P6 ✓ Aktif
1.8 V, 2.5 V, or 3.3 V Vdss 20-pin TSSOP Package 32 MHz Speed 8 KB (8K x 8) Memory
MOQ: 1 |

STM32L011F3P6 Ringkasan

The STMicroelectronics STM32L011F3P6 is an ultra-low-power 32-bit microcontroller built around an Arm Cortex-M0+ RISC core, operating at up to 32 MHz with 8 KB of Flash memory in a 20-pin TSSOP package. Its compact architecture supports 1.8 V, 2.5 V, and 3.3 V operating voltages, making it suitable for embedded controls, battery-powered instruments, connected sensors, and compact consumer equipment where board area and energy efficiency are important.

An ultra-low-power microcontroller is a semiconductor designed to execute application software while minimizing active energy consumption and sleep-state leakage. The STM32L0 family combines an Arm Cortex-M0+ processor, embedded memory, low-power peripherals, and reset and supply-management functions within one device. This places the MCU in the wider hierarchy of embedded processing components: Arm Cortex-M0+ core, 32-bit microcontroller, integrated circuit, and embedded semiconductor.

The STM32L011F3P6 provides a 32 MHz maximum CPU frequency and 8 KB of Flash program memory in the STM32L011x3 access-line family. The manufacturer describes the family as ultra-low-power and includes reset and supply-management functions. Its 1.8 V, 2.5 V, and 3.3 V operating-voltage options allow operation from common low-voltage rails. The 20-pin TSSOP format supports surface-mount assembly while reducing PCB footprint requirements compared with larger leaded packages.

The Arm Cortex-M0+ architecture provides a compact instruction set suited to control tasks, peripheral configuration, communication, and simple signal processing. The STM32L011F3P6 integrates the processor and application resources into a small device, reducing the number of external components needed for basic embedded systems. Firmware development can use the STM32 family ecosystem, while designers must confirm peripheral availability, pin multiplexing, and electrical limits against the manufacturer documentation before assigning a function to each package pin.

Typical applications include low-power sensor nodes, battery-operated measurement instruments, compact motor and actuator controllers, appliance controls, and small industrial control modules. The MCU is particularly relevant when a design needs more processing capability than a basic logic device but must retain a small package and low-voltage operation. For connected products, peripheral availability and communication requirements should be checked against the exact device variant before schematic capture.

PCB planning should reserve the manufacturer-specified decoupling capacitors, oscillator components when required, programming access, and exposed ground connections for the selected 20-pin TSSOP footprint. Power rails must remain within the supported voltage range, and unused inputs should be configured appropriately to avoid unintended current consumption. Firmware should exercise the low-power modes only after clocks, peripherals, and wake sources have been validated.

This product page organizes the key STM32L011F3P6 characteristics, sourcing information, package considerations, application guidance, and documented substitute constraints. It also distinguishes the target device from related STM32 variants so engineers can assess memory, package, voltage, and peripheral differences before committing a design to production.

Pilihan pengganti yang segera untuk STM32L011F3P6 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera STM32L011F3P6 (sama faktor bentuk dan kaki) — berbeza dalam Flash Memory, Package.

STMicroelectronics
Flash Memory: 16 KB
Package: 20-TSSOP
Bandingkan Dengan STM32L011F3P6 →

STM32L011F4P6TR

✅ Masuk Drop-In
📦 TSSOP-20
The F4 variant uses a different Flash-memory configuration from the target's 8 KB, so firmware memory requirements can differ while the 20-pin TSSOP family and core position remain compatible.

📋 Alternatif rujukan (tidak dalam katalog)

STM32L010F4P6TR

✅ Masuk Drop-In
📦 TSSOP-20
The L010 F4 candidate uses a different Flash-memory configuration from the target's 8 KB, requiring a memory-map and firmware check even though it is identified within the same STM32 cross-reference family.

📋 Alternatif rujukan (tidak dalam katalog)

STM32L011F3P6 Penilaian maksimum & Ciri-ciri Elektrik

Product Type 32-bit ultra-low-power microcontroller
Manufacturer STMicroelectronics
CPU Core Arm Cortex-M0+
Architecture 32-bit RISC
Maximum CPU Frequency 32 MHz
Flash Memory 8 KB (8K x 8)
Operating Voltage 1.8 V, 2.5 V, or 3.3 V
Kemasan 20-pin TSSOP
Jenis Pemasangan Surface mount
Product Family STM32L011x3/4 access line
Power Class Ultra-low-power
Supply Management Integrated reset and supply management

Panduan Konfigurasi Pin STM32L011F3P6 20-pin tssop

Konfigurasi pin untuk STM32L011F3P6 (20-pin tssop pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 20-pin tssop untuk STM32L011F3P6

Tiada data garisan pin yang diperoleh untuk STM32L011F3P6.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

STM32L011F3P6 patut untuk 6 aplikasis: Battery-Powered Sensor Nodes, Battery-Operated Measurement Instruments, Compact Appliance Controls, Small Motor and Actuator Controllers, Low-Power IoT Endpoint Controllers, Programmable Embedded Control Modules.

🧩

Battery-Powered Sensor Nodes

The STM32L011F3P6 fits compact sensor nodes because its Arm Cortex-M0+ core operates at up to 32 MHz while the STM32L011x3/4 family is positioned for ultra-low-power operation. The 8 KB of Flash can hold a focused acquisition and communication routine, while operation from 1.8 V, 2.5 V, or 3.3 V supports common energy-harvesting and battery rails. Place the MCU beside the sensor interface, route the ground plane beneath the device, and validate the sleep-mode current, wake sources, and duty-cycle budget on the assembled board.

⚡

Battery-Operated Measurement Instruments

A portable meter or simple data logger can use the STM32L011F3P6 for control, scaling, local status handling, and measurement-system supervision. Its 32-bit Cortex-M0+ processor provides more general-purpose capability than a basic logic controller, while 8 KB of Flash supports a deliberately compact firmware image. The 20-pin TSSOP package reduces board width in handheld products. Engineering teams should confirm that the selected pin assignments expose the required ADC, timer, serial interface, and reset functions before freezing the enclosure and PCB design.

🏭

Compact Appliance Controls

The STM32L011F3P6 is appropriate for appliance subassemblies that coordinate buttons, indicators, sensors, and small actuators. Its 32 MHz Cortex-M0+ core can handle a real-time control loop and peripheral interrupts, while the low-power family positioning supports battery or efficient line-powered operation. The three listed operating voltages permit integration with mixed-voltage control boards. Keep high-current switching devices away from the MCU area, provide local supply decoupling, and define a safe firmware state for every input and output during reset or firmware faults.

🔧

Small Motor and Actuator Controllers

For compact motor or actuator modules, the STM32L011F3P6 can manage command decoding, limit sensing, timing, and status reporting through its embedded control resources. The 32-bit Cortex-M0+ architecture is suitable for deterministic supervisory tasks, and the 20-pin TSSOP package can be mounted close to the controlled mechanism. The design must verify the exact timer outputs, capture inputs, and alternate functions in the package pin table. Use transistor drivers and protection networks rather than driving inductive loads directly from MCU pins.

🌐

Low-Power IoT Endpoint Controllers

The STM32L011F3P6 can serve as the local endpoint controller in a small IoT product when the radio or network module handles high-bandwidth communication and the MCU manages sensing, configuration, and power management. Its 1.8 V, 2.5 V, and 3.3 V operation supports common interface levels, and the 32-pin-independent TSSOP-20 footprint simplifies compact board assembly. Confirm UART, SPI, or I2C availability and pin multiplexing in the manufacturer documentation. Synchronization and wake latency should be measured with the complete radio, regulator, and sensor load.

🖥️

Programmable Embedded Control Modules

The STM32L011F3P6 fits small programmable modules that consolidate sensing, control, and serial configuration into one board. Its 8 KB of Flash and 32 MHz Cortex-M0+ execution support focused embedded firmware, and the 20-pin TSSOP package allows a compact module outline. Designers should reserve the documented programming interface, decoupling positions, and all power pins. Validate boot behavior, reset thresholds, and firmware update workflows on production hardware because package pin assignment and memory configuration determine whether an existing module can be reused without modification.

What is the STM32L011F3P6?
The STM32L011F3P6 is an ultra-low-power 32-bit microcontroller from STMicroelectronics with an Arm Cortex-M0+ RISC core, a maximum operating frequency of 32 MHz, and 8 KB of Flash memory. According to the STMicroelectronics STM32L011F3 product page, it belongs to the STM32L011x3/4 access-line family and incorporates reset and supply-management functions. The device is offered in a compact 20-pin TSSOP package for low-voltage embedded-control applications.
What are the key specifications of STM32L011F3P6?
The STM32L011F3P6 combines a 32-bit Arm Cortex-M0+ core, 32 MHz maximum CPU frequency, 8 KB of Flash memory, and support for 1.8 V, 2.5 V, and 3.3 V operation in a 20-pin TSSOP package. The STMMicroelectronics STM32L011F3 product page identifies the device as part of the ultra-low-power STM32L011x3/4 family. RAM, GPIO, timers, analog peripherals, and extended temperature limits should be selected from the manufacturer data for the exact ordering code.
What is the operating voltage of STM32L011F3P6?
The STM32L011F3P6 supports 1.8 V, 2.5 V, and 3.3 V operation according to the STM32L011F3P6 product listing. These rails are suitable for low-voltage embedded systems and are particularly useful in battery-operated designs. The manufacturer documentation should be used to determine the exact voltage tolerances, regulator configurations, and operating limits for internal and external supply paths before the PCB is released.
How much Flash memory does STM32L011F3P6 have?
The STM32L011F3P6 contains 8 KB of Flash memory organized as 8K x 8. This memory capacity is confirmed in the STM32L011F3P6 manufacturer and distributor product descriptions. Firmware size must include application code, interrupt routines, boot logic, configuration data, and any update mechanism. RAM requirements are not stated in the cited product summary and should be checked against the manufacturer device documentation.
Where can I download the STM32L011F3P6 datasheet PDF?
The official STM32L011F3 product page is the primary location for the STM32L011F3 family documentation and product resources. It is available at https://www.st.com/en/microcontrollers-microprocessors/stm32l011f3.html. Use the datasheets, reference manual, and errata associated with the STM32L011x3/4 family. The manufacturer page also links to ordering information and lifecycle resources needed during component qualification.
Where can I find the STM32L011F3P6 pinout?
The STM32L011F3P6 pin assignments, alternate functions, and package drawings are defined in the pin-definition section of the STM32L011x3/4 manufacturer documentation. The device uses a 20-pin TSSOP package, but individual signal names and alternate-function assignments must be read from the official table rather than inferred from another STM32 member. Use the package drawing to verify pin-1 orientation and the physical PCB footprint before layout release.
Where can I buy STM32L011F3P6 online?
The STM32L011F3P6 can be requested through the Request a Quote form on this page, where the exact ordering code and required quantity can be included in the inquiry. The manufacturer lists the device through its official eStore, while authorized distribution listings also identify the part as orderable. Confirm the package suffix, delivery format, stock status, and current lead time during quotation.
What is the price of STM32L011F3P6?
The current commercial price for STM32L011F3P6 is obtained through the Request a Quote form on this page. The quotation should state whether the requirement is one unit, production volume, tube packaging, or another delivery format. Because distributor price breaks and inventory can change, engineers should request a current quote for the exact MPN rather than rely on a historical listing or an unqualified starting-price reference.
What is the lead time for STM32L011F3P6?
Use the Request a Quote form on this page to request the current lead time and minimum order quantity for STM32L011F3P6. Lead time depends on supplier inventory, order volume, and the selected delivery format, so it should be confirmed for the production schedule. The STM32L011F3P6 is listed as an orderable STM32L011x3/4 family member, but an orderable listing does not establish a guaranteed delivery interval.
Is STM32L011F3P6 in stock?
Current inventory for STM32L011F3P6 should be confirmed through the Request a Quote form on this page. The product is actively offered by STMicroelectronics and appears in multiple distributor catalogs, but catalog presence does not guarantee stock for a specific quantity. Include your required quantity, target date, tube packaging preference, and acceptable shipment destination in the request so the fulfillment team can provide a precise response.
What is the best drop-in replacement for STM32L011F3P6?
The best drop-in replacement is the compatible STM32 variant that preserves the 20-pin TSSOP footprint, supported supply voltages, Arm Cortex-M0+ architecture, and required peripheral assignments. STM32L011F4P6TR and STM32L010F4P6TR are identified as related cross-reference candidates, but Flash-memory differences must be checked before production substitution. No verified cross-manufacturer drop-in equivalent is identified, so firmware, pin multiplexing, timing, and qualification reviews remain essential.
Can STM32L011F4P6TR replace STM32L011F3P6?
STM32L011F4P6TR is a related same-family candidate, but it should not be treated as an unconditional substitution. According to the STM32L011F3P6TR cross-reference listing, the part is listed among known equivalents; the STM32 family naming indicates that the F4 option differs from the F3 target in Flash-memory configuration. Verify the memory map, boot behavior, peripherals, pin functions, and application firmware against the manufacturer documentation before approving it.
STM32L011F3P6 vs STM32L010F4P6TR - which is better?
STM32L011F3P6 is preferable when the design specifically targets 8 KB of Flash memory and the STM32L011x3 access line. STM32L010F4P6TR is a related candidate for designs requiring the F4 memory configuration, subject to pinout and peripheral validation. Both are listed as alternatives in the STM32L011F3P6TR cross-reference results. Choose based on verified Flash capacity, peripheral availability, supply range, qualification needs, and firmware compatibility rather than the MPN suffix alone.
When should I choose STM32L011F3P6 over another STM32L0 microcontroller?
Choose STM32L011F3P6 when an Arm Cortex-M0+ system needs 32 MHz operation, 8 KB of Flash, 1.8 V to 3.3 V support, and a compact 20-pin TSSOP package. Select another STM32L0 device when the design requires more Flash, additional RAM, a different peripheral mix, a larger package, or an extended qualification profile. The STM32L011F3 product page confirms the core, frequency, memory class, voltage options, and family positioning used for this decision.
Is there a verified cross-brand equivalent for STM32L011F3P6?
No verified cross-brand drop-in equivalent is established for the STM32L011F3P6. The cross-reference results advise checking electrical specifications, pin compatibility, and package dimensions, but they do not identify a qualifying pin-to-pin part from another manufacturer. A second source should therefore be treated as a new design qualification involving footprint, interrupt mapping, memory map, peripheral behavior, toolchain support, firmware changes, and production validation.

Data referensi kejuruteraan untuk STM32L011F3P6 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose STM32L011F3P6 when the design requires an Arm Cortex-M0+ controller at up to 32 MHz, exactly 8 KB of Flash, operation from 1.8 V, 2.5 V, or 3.3 V, and a compact TSSOP-20 footprint. It is well matched to focused low-power controls, portable instruments, sensor nodes, and compact appliance modules. Consider STM32L011F4P6TR when the related F4 configuration provides sufficient memory and its other device parameters meet the design, while retaining the same package family. Consider STM32L010F4P6TR only after confirming memory-map, peripheral, and pin-function compatibility. No cross-manufacturer substitute is established, so a second source should be treated as a fresh hardware and firmware qualification rather than a routine drop-in change.

Perbandingan dengan Gantian

Parametr Produk Ini STM32L011F4P6TR STM32L010F4P6TR
Package TSSOP-20 TSSOP-20 TSSOP-20
Brand STMicroelectronics STMicroelectronics STMicroelectronics
Product Family STM32L011x3/4 access line STM32L011x3/4 family STM32L010 family
Delivery Format Tube Tape and reel Tape and reel

Penyeberangsung Jelas

  • Exact 8 KB target configuration (vsSTM32L011F4P6TR)
  • Targeted STM32L011 access-line positioning (vsSTM32L010F4P6TR)
  • Compact 20-pin surface-mount implementation (vsSTM32L011F4P6TR)

Catatan Desain

Use the manufacturer STM32L011x3/4 package drawing and land pattern when laying out the 20-pin TSSOP footprint. Verify pin-1 orientation against the PCB library, maintain the specified power and ground connections, and place the required decoupling capacitors immediately adjacent to their corresponding pins. Keep the analog or sensitive signal path away from switching nodes and provide a continuous ground reference beneath the device.

Design the supply network for the STM32L011F3P6's supported 1.8 V, 2.5 V, and 3.3 V operating conditions. Select the rail used by the complete board rather than assuming every peripheral shares the same voltage. Check startup, reset thresholds, brownout behavior, and regulator quiescent current against the power budget. For battery applications, include the MCU sleep current and peripheral leakage in the calculated operating life rather than using active-current figures alone.

Do not infer pin compatibility from the Cortex-M0+ core name alone. A substitution can differ in Flash size, memory map, peripheral availability, alternate functions, and startup behavior. When evaluating STM32L011F4P6TR or STM32L010F4P6TR, compare the exact ordering code, package drawing, pin-definition table, device features, and firmware assumptions. Rebuild and test the production PCB whenever a component change affects the BOM.

Keep oscillator and timing-sensitive routes short, and avoid routing high-current switching paths beneath or immediately beside the MCU. Separate sensitive analog inputs from digital control signals where practical, provide a low-impedance ground return, and use test points for supply, reset, programming, and selected communication interfaces. If the application relies on low-power operation, inspect leakage paths from external pull-ups, LEDs, level shifters, and connected peripherals.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The cited product descriptions do not state a specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these requirements using the current manufacturer product documentation and applicable customer qualification records.

Data disahkan pada: 2026-11-19 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

STM32L011F3P6 datasheet STM32L011F3P6 datasheet pdf STM32L011F3P6 pinout STM32L011F3P6 specifications STM32L011F3P6 TSSOP-20 footprint STM32L011F3P6 equivalent STM32L011F3P6 replacement STM32L011F3P6 cross reference STM32L011F3P6 vs STM32L011F4P6TR STM32L011F3P6 price STMicroelectronics STM32L011F3P6 STM32L011F3P6 32MHz 8KB flash

Komponen dan Tanda berkaitan

STMicroelectronics STM32L011F3P6 STM32L011F3 STM32L011F4P6TR STM32L010F4P6TR Arm Cortex-M0+ 32-bit RISC core ultra-low-power microcontroller embedded microcontroller integrated circuit semiconductor 32 MHz 8 KB Flash 1.8 V 2.5 V 3.3 V TSSOP-20 TSSOP package family surface mount SMD Arm Cortex-M0+ ecosystem STM32L011x3/4 low-power sensor node battery-powered measurement instrument embedded control module
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ