STM32L052R6T6 - 32MHz Cortex-M0+ USB MCU | STMicroelectronics
MPN: STM32L052R6T6 ✓ AktifSTM32L052R6T6 Ringkasan
An ultra-low-power microcontroller is a semiconductor designed to minimize energy consumption during active processing and standby operation. Within the product hierarchy, this device belongs to the STM32L0 family of 32-bit ARM Cortex-M0+ microcontrollers, combining a real-time microcontroller core, embedded nonvolatile memory, analog peripherals, and communication interfaces on one package. This integration allows a board to perform local sensing, control, and USB data transfer without adding a separate host controller.
Key features include a maximum CPU frequency of 32 MHz, 32 KB of Flash for firmware storage, and 8 KB of SRAM for working memory. The integrated USB 2.0 controller supports crystal-less operation, reducing the number of external timing components required in USB designs. The analog feature set includes an ADC and DAC, while the 2 KB EEPROM provides nonvolatile storage for calibration data, configuration parameters, or serial numbers.
The STM32L0 architecture is suited to applications where energy efficiency matters as much as processing capability. Its low-power feature set supports duty-cycled measurement systems in which the controller wakes, samples, processes, transmits data, and returns to a low-power state. USB connectivity enables configuration, logging, firmware update, and direct sensor-data transfer without requiring a separate communications processor.
Typical applications include compact USB-connected environmental monitors, industrial sensor nodes, low-power data loggers, portable measurement instruments, and USB-controlled peripheral boards. The 64-LQFP package provides a conventional leaded footprint that is easier to inspect and hand-prototype than a fine-pitch ball-grid-array package, while remaining suitable for automated surface-mount assembly.
PCB design should route USB D+ and D- as a controlled-impedance differential pair, place the 1.5 percent USB clock-crystal load capacitors close to the device, and provide the decoupling network specified in the manufacturer pinout and application guidance. Firmware development also requires confirming the low-power regulator settings, clock-tree configuration, and analog reference arrangement before reducing the operating frequency or disabling unused peripherals.
This page consolidates manufacturer and distributor information into an engineering-oriented reference covering connectivity, memory, analog capability, package details, application fit, and same-family replacement options. It also identifies where device-specific verification is still required, helping designers move from initial component selection to a defensible hardware and firmware design.
Pilihan pengganti yang segera untuk STM32L052R6T6 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera STM32L052R6T6 (sama faktor bentuk dan kaki) — berbeza dalam Flash Memory, Package, Product Type, ADC, Architecture.
STM32L051R6T6
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →STM32L053R6T6
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →STM32L152R6T6A
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →STM32L052R8T6
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →STM32L071R6T6
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
STM32L052R6T6 Penilaian maksimum & Ciri-ciri Elektrik
| Manufacturer | STMicroelectronics |
| Product Type | 32-bit ultra-low-power microcontroller |
| CPU Core | Arm Cortex-M0+ |
| Architecture | ARM 32-bit |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 32 KB (32K x 8) |
| SRAM | 8 KB |
| EEPROM | 2 KB |
| Tegangan Pemberi Arus | 3.3 V |
| USB Interface | USB 2.0 crystal-less |
| ADC | 12-bit ADC |
| DAC | Integrated DAC |
| Kemasan | 64-LQFP (10 x 10 mm) |
| Jenis Pemasangan | Surface Mount |
| Number of I/O Pins | 51 |
| Frekuensi Klock Maksimum | 32 MHz |
| Program Memory Type | Flash |
Panduan Konfigurasi Pin STM32L052R6T6 64-lqfp (10 x 10 mm)
Konfigurasi pin untuk STM32L052R6T6 (64-lqfp (10 x 10 mm) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk STM32L052R6T6.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
STM32L052R6T6 patut untuk 6 aplikasis: USB-Connected Environmental Sensor Node, Low-Power Industrial Data Logger, USB Programmable Control Panel, Portable Measurement Instrument, USB Firmware Update and Configuration Bridge, Battery-Powered Condition Monitoring Node.
USB-Connected Environmental Sensor Node
The STM32L052R6T6 fits a compact environmental sensor that periodically measures temperature, humidity, or air quality and exposes the results through USB. Its 32 MHz Arm Cortex-M0+ core provides enough performance for local filtering and sensor management, while the 12-bit ADC supports analog front-end conversion. The crystal-less USB 2.0 controller simplifies peripheral enumeration and removes the need for a dedicated USB interface IC. Duty-cycled operation can keep the MCU inactive between samples, so the system power budget should include sensor standby current, regulator quiescent current, and the USB pull-up state in addition to MCU sleep current.
Disebarkan
Low-Power Industrial Data Logger
The STM32L052R6T6 is appropriate for a battery-powered logger that records process variables, event counters, and alarm timestamps. Its 32 KB of Flash provides a defined firmware-storage budget, while 8 KB of SRAM supports buffering and protocol formatting. The DAC can generate a reference or test signal where analog output is needed, and the ADC handles sensor conditioning. For long unattended operation, configure the low-power modes carefully and validate the leakage contribution of pull-ups, analog switches, memory chips, and the power regulator rather than relying only on the MCU current specification.
Disebarkan
USB Programmable Control Panel
The STM32L052R6T6 can serve as the controller in a USB-connected panel that accepts commands, controls actuators, and reports diagnostic status. Its 51 available I/O pins and integrated analog peripherals allow a single device to handle digital control, setpoints, and analog monitoring without a separate programmable logic device. USB crystal-less operation simplifies the physical connection to a host computer. Firmware should implement command validation and watchdog recovery, and the PCB should separate sensitive analog inputs from switching nodes to reduce coupling during operation.
Disebarkan
Portable Measurement Instrument
The STM32L052R6T6 fits portable instruments that combine a sensor, local display or control interface, and USB connectivity for configuration or data export. The Cortex-M0+ core can handle sampling, calibration tables, and communications while the 2 KB EEPROM stores device settings. The 64-LQFP package exposes enough I/O for buttons, indicators, and external converters while remaining practical for surface-mount assembly. Use the DAC for excitation or self-test signals where appropriate, and calibrate the analog path across the full operating temperature range rather than relying on a single-point adjustment.
Disebarkan
USB Firmware Update and Configuration Bridge
The STM32L052R6T6 can act as a USB-connected configuration and firmware-update endpoint for a larger control system. The 32 MHz Cortex-M0+ core is sufficient for boot verification, flash programming, device identification, and transfer of configuration blocks, while the crystal-less USB controller supports direct host communication. Designers should implement a robust bootloader with version control, signature verification where security requirements apply, and recovery through a separate hardware path. Validate USB enumeration across the host operating systems and cable lengths used in the target product.
Disebarkan
Battery-Powered Condition Monitoring Node
The STM32L052R6T6 supports remote vibration, temperature, or equipment-condition monitoring where each node must operate for extended periods without frequent maintenance. Its ultra-low-power STM32L0 architecture allows the controller to wake on a timer, acquire measurements, analyze local thresholds, and return to sleep. The 12-bit ADC and DAC support transducer interface and test-signal generation, while USB provides a convenient configuration path during installation. A complete battery calculation must include regulator efficiency, sensor leakage, pull networks, and the frequency of USB attachment.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk STM32L052R6T6 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | STM32L051R6T6 | STM32L053R6T6 | STM32L152R6T6 | STM32L052R8T6 | STM32L071R6T6 |
|---|---|---|---|---|---|---|
| Package | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
Penyeberangsung Jelas
- USB connectivity without a separate interface controller (vsSTM32L051R6T6)
- Larger firmware image option in the same family (vsSTM32L052R8T6)
- Consolidated low-power sensing and USB control (vsSTM32L053R6T6)
Catatan Desain
Route USB D+ and D- as a short, symmetric differential pair with continuous reference-plane support, and place the required crystal-less USB load capacitors close to their assigned pins. Keep analog inputs away from USB clocks, switching regulators, and fast digital nets. The pin-description and layout sections in the manufacturer datasheet should be treated as the authority for exact pin assignments and decoupling requirements.
Build the current budget from the MCU operating state, analog peripherals, external sensors, pull networks, and regulator quiescent current rather than from the processor current alone. If USB is disconnected or the device spends most of its time in sleep, confirm the effect of USB pull-up states and board leakage. Use the manufacturer minimum and maximum supply recommendations and decoupling values to select the power architecture.
Do not treat a family member with the same LQFP outline as automatically interchangeable. Confirm the exact pin functions, alternate-function mapping, boot configuration, memory organization, USB clock arrangement, security features, and peripheral interrupt vectors. After changing devices, rebuild the startup code and linker configuration, then repeat timing, low-power, analog-accuracy, and USB enumeration tests.
Separate analog and digital return currents where possible and keep the ADC input network physically short and away from high-current switching paths. The DAC output may require buffering when driving a higher-impedance or capacitive load. Validate the reference voltage, source impedance, sampling time, and acquisition-cycle settings in firmware because acquisition timing and source impedance can materially affect conversion accuracy.
Maklumat Kesediaan
The manufacturer product information identifies the STM32L052R6 family and USB functionality but does not provide explicit per-MPN RoHS, REACH, halogen-free, conflict-minerals, or AEC-Q100 statements in the available material. Confirm the exact orderable-part declarations and qualification documents before production release.