STM32L052R6T6 - 32MHz Cortex-M0+ USB MCU | STMicroelectronics
部品番号: STM32L052R6T6 ✓ 生産中STM32L052R6T6 概要
An ultra-low-power microcontroller is a semiconductor designed to minimize energy consumption during active processing and standby operation. Within the product hierarchy, this device belongs to the STM32L0 family of 32-bit ARM Cortex-M0+ microcontrollers, combining a real-time microcontroller core, embedded nonvolatile memory, analog peripherals, and communication interfaces on one package. This integration allows a board to perform local sensing, control, and USB data transfer without adding a separate host controller.
Key features include a maximum CPU frequency of 32 MHz, 32 KB of Flash for firmware storage, and 8 KB of SRAM for working memory. The integrated USB 2.0 controller supports crystal-less operation, reducing the number of external timing components required in USB designs. The analog feature set includes an ADC and DAC, while the 2 KB EEPROM provides nonvolatile storage for calibration data, configuration parameters, or serial numbers.
The STM32L0 architecture is suited to applications where energy efficiency matters as much as processing capability. Its low-power feature set supports duty-cycled measurement systems in which the controller wakes, samples, processes, transmits data, and returns to a low-power state. USB connectivity enables configuration, logging, firmware update, and direct sensor-data transfer without requiring a separate communications processor.
Typical applications include compact USB-connected environmental monitors, industrial sensor nodes, low-power data loggers, portable measurement instruments, and USB-controlled peripheral boards. The 64-LQFP package provides a conventional leaded footprint that is easier to inspect and hand-prototype than a fine-pitch ball-grid-array package, while remaining suitable for automated surface-mount assembly.
PCB design should route USB D+ and D- as a controlled-impedance differential pair, place the 1.5 percent USB clock-crystal load capacitors close to the device, and provide the decoupling network specified in the manufacturer pinout and application guidance. Firmware development also requires confirming the low-power regulator settings, clock-tree configuration, and analog reference arrangement before reducing the operating frequency or disabling unused peripherals.
This page consolidates manufacturer and distributor information into an engineering-oriented reference covering connectivity, memory, analog capability, package details, application fit, and same-family replacement options. It also identifies where device-specific verification is still required, helping designers move from initial component selection to a defensible hardware and firmware design.
ドロップイン代替品: STM32L052R6T6 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: STM32L052R6T6 (同一形状・フットプリント) — 相違点: Flash Memory, Package, Product Type, ADC, Architecture.
STM32L051R6T6
✅ ドロップイン価格はお問い合わせください
データシートを見る →STM32L053R6T6
✅ ドロップイン価格はお問い合わせください
データシートを見る →STM32L152R6T6A
✅ ドロップイン価格はお問い合わせください
データシートを見る →STM32L052R8T6
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →STM32L071R6T6
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
STM32L052R6T6 最大定格&電気的特性
| Manufacturer | STMicroelectronics |
| Product Type | 32-bit ultra-low-power microcontroller |
| CPU Core | Arm Cortex-M0+ |
| Architecture | ARM 32-bit |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 32 KB (32K x 8) |
| SRAM | 8 KB |
| EEPROM | 2 KB |
| 電源電圧 | 3.3 V |
| USB Interface | USB 2.0 crystal-less |
| ADC | 12-bit ADC |
| DAC | Integrated DAC |
| パッケージ | 64-LQFP (10 x 10 mm) |
| 実装タイプ | Surface Mount |
| Number of I/O Pins | 51 |
| 最大クロック周波数 | 32 MHz |
| Program Memory Type | Flash |
STM32L052R6T6 64-lqfp (10 x 10 mm) ピン配置ガイド
STM32L052R6T6 (64-lqfp (10 x 10 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: STM32L052R6T6.
詳細は データシート をご参照ください。
主な用途
STM32L052R6T6 の用途: 6 件s: USB-Connected Environmental Sensor Node, Low-Power Industrial Data Logger, USB Programmable Control Panel, Portable Measurement Instrument, USB Firmware Update and Configuration Bridge, Battery-Powered Condition Monitoring Node.
USB-Connected Environmental Sensor Node
The STM32L052R6T6 fits a compact environmental sensor that periodically measures temperature, humidity, or air quality and exposes the results through USB. Its 32 MHz Arm Cortex-M0+ core provides enough performance for local filtering and sensor management, while the 12-bit ADC supports analog front-end conversion. The crystal-less USB 2.0 controller simplifies peripheral enumeration and removes the need for a dedicated USB interface IC. Duty-cycled operation can keep the MCU inactive between samples, so the system power budget should include sensor standby current, regulator quiescent current, and the USB pull-up state in addition to MCU sleep current.
おすすめ
Low-Power Industrial Data Logger
The STM32L052R6T6 is appropriate for a battery-powered logger that records process variables, event counters, and alarm timestamps. Its 32 KB of Flash provides a defined firmware-storage budget, while 8 KB of SRAM supports buffering and protocol formatting. The DAC can generate a reference or test signal where analog output is needed, and the ADC handles sensor conditioning. For long unattended operation, configure the low-power modes carefully and validate the leakage contribution of pull-ups, analog switches, memory chips, and the power regulator rather than relying only on the MCU current specification.
おすすめ
USB Programmable Control Panel
The STM32L052R6T6 can serve as the controller in a USB-connected panel that accepts commands, controls actuators, and reports diagnostic status. Its 51 available I/O pins and integrated analog peripherals allow a single device to handle digital control, setpoints, and analog monitoring without a separate programmable logic device. USB crystal-less operation simplifies the physical connection to a host computer. Firmware should implement command validation and watchdog recovery, and the PCB should separate sensitive analog inputs from switching nodes to reduce coupling during operation.
おすすめ
Portable Measurement Instrument
The STM32L052R6T6 fits portable instruments that combine a sensor, local display or control interface, and USB connectivity for configuration or data export. The Cortex-M0+ core can handle sampling, calibration tables, and communications while the 2 KB EEPROM stores device settings. The 64-LQFP package exposes enough I/O for buttons, indicators, and external converters while remaining practical for surface-mount assembly. Use the DAC for excitation or self-test signals where appropriate, and calibrate the analog path across the full operating temperature range rather than relying on a single-point adjustment.
おすすめ
USB Firmware Update and Configuration Bridge
The STM32L052R6T6 can act as a USB-connected configuration and firmware-update endpoint for a larger control system. The 32 MHz Cortex-M0+ core is sufficient for boot verification, flash programming, device identification, and transfer of configuration blocks, while the crystal-less USB controller supports direct host communication. Designers should implement a robust bootloader with version control, signature verification where security requirements apply, and recovery through a separate hardware path. Validate USB enumeration across the host operating systems and cable lengths used in the target product.
おすすめ
Battery-Powered Condition Monitoring Node
The STM32L052R6T6 supports remote vibration, temperature, or equipment-condition monitoring where each node must operate for extended periods without frequent maintenance. Its ultra-low-power STM32L0 architecture allows the controller to wake on a timer, acquire measurements, analyze local thresholds, and return to sleep. The 12-bit ADC and DAC support transducer interface and test-signal generation, while USB provides a convenient configuration path during installation. A complete battery calculation must include regulator efficiency, sensor leakage, pull networks, and the frequency of USB attachment.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: STM32L052R6T6 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | STM32L051R6T6 | STM32L053R6T6 | STM32L152R6T6 | STM32L052R8T6 | STM32L071R6T6 |
|---|---|---|---|---|---|---|
| Package | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
主な差別化要因
- USB connectivity without a separate interface controller (vs STM32L051R6T6)
- Larger firmware image option in the same family (vs STM32L052R8T6)
- Consolidated low-power sensing and USB control (vs STM32L053R6T6)
設計ノート
Route USB D+ and D- as a short, symmetric differential pair with continuous reference-plane support, and place the required crystal-less USB load capacitors close to their assigned pins. Keep analog inputs away from USB clocks, switching regulators, and fast digital nets. The pin-description and layout sections in the manufacturer datasheet should be treated as the authority for exact pin assignments and decoupling requirements.
Build the current budget from the MCU operating state, analog peripherals, external sensors, pull networks, and regulator quiescent current rather than from the processor current alone. If USB is disconnected or the device spends most of its time in sleep, confirm the effect of USB pull-up states and board leakage. Use the manufacturer minimum and maximum supply recommendations and decoupling values to select the power architecture.
Do not treat a family member with the same LQFP outline as automatically interchangeable. Confirm the exact pin functions, alternate-function mapping, boot configuration, memory organization, USB clock arrangement, security features, and peripheral interrupt vectors. After changing devices, rebuild the startup code and linker configuration, then repeat timing, low-power, analog-accuracy, and USB enumeration tests.
Separate analog and digital return currents where possible and keep the ADC input network physically short and away from high-current switching paths. The DAC output may require buffering when driving a higher-impedance or capacitive load. Validate the reference voltage, source impedance, sampling time, and acquisition-cycle settings in firmware because acquisition timing and source impedance can materially affect conversion accuracy.
コンプライアンス情報
The manufacturer product information identifies the STM32L052R6 family and USB functionality but does not provide explicit per-MPN RoHS, REACH, halogen-free, conflict-minerals, or AEC-Q100 statements in the available material. Confirm the exact orderable-part declarations and qualification documents before production release.