STM32L072KBU7 - 32MHz Cortex-M0+ 128KB Flash | ST
MPN: STM32L072KBU7 ✓ AktifSTM32L072KBU7 Ringkasan
An ultra-low-power microcontroller is an integrated circuit optimized to minimize energy consumption during active operation, sleep, standby, and wake-up transitions. The STM32L0 Series belongs to the hierarchy microcontroller → 32-bit RISC microcontroller → ARM Cortex-M0+ microcontroller → ultra-low-power embedded MCU. This makes it suitable for battery-operated sensors, portable measurement equipment, connected accessories, and industrial devices that spend most of their operating time in a low-power state.
The verified configuration includes a 32 MHz ARM Cortex-M0+ core, 128 KB of flash memory, USB 2.0 crystal-less operation, and operation from 2.5 V or 3.3 V supply levels. The microcontroller is identified in a 32-UFQFPN 5 mm × 5 mm package with an exposed pad. Its 128 KB program memory provides room for application firmware, USB device firmware, communication stacks, and field-upgrade routines without requiring external program memory.
The STM32L072KBU7 is based on the STM32L072KB device family. STMicroelectronics describes the STM32L072xx line as combining ultra-low-power behavior with USB 2.0 crystal-less connectivity, allowing USB clock recovery without a discrete crystal when the board budget and clock-tolerance requirements permit. Because the supplied data does not enumerate RAM capacity, GPIO count, temperature limits, or individual peripheral ratings, those values are marked as data needed rather than inferred.
Typical uses include USB-connected sensor nodes, compact data loggers, low-energy industrial monitors, firmware-update gateways, and handheld measurement instruments. The compact package also suits USB accessories and embedded systems where board area is constrained. Firmware can use the USB interface for enumeration and data transfer while retaining the Cortex-M0+ ecosystem of development tools, peripheral libraries, and application support.
Designers should confirm the exact pin mapping, exposed-pad connection, decoupling requirements, and low-power current budgets against the STM32L072KB manufacturer documentation before layout release. The provided distributor summaries do not expose complete electrical or thermal tables, so no ADC accuracy, temperature range, or current-consumption value is asserted here. The exposed thermal pad should be evaluated as a potential ground and heat-spreading connection according to the manufacturer's land-pattern guidance.
This page consolidates verified distributor specifications, same-family drop-in candidates, application guidance, and design considerations that are not presented together on a typical distributor listing. Because no verified cross-brand pin-compatible substitute was identified in the supplied cross-reference results, the alternatives are limited to documented STM32L0 family variants rather than padding the list with mechanically similar but electrically different devices.
Pilihan pengganti yang segera untuk STM32L072KBU7 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
STM32L072KBU6
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
STM32L071KBU6
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
STM32L072KCU6
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
STM32L071KCU6
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
STM32L072KBU7 Penilaian maksimum & Ciri-ciri Elektrik
| Manufacturer | STMicroelectronics |
| Product Series | STM32L0 Series |
| Device Family | STM32L072xx |
| CPU Core | ARM Cortex-M0+ |
| Architecture | 32-bit RISC |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 128 KB (128K × 8) |
| Tegangan Pemberi Arus Operasi | 2.5 V or 3.3 V |
| USB Interface | USB 2.0 crystal-less |
| Kemasan | 32-pin UFQFPN (5 mm × 5 mm) |
| Exposed Pad | Present |
| Jenis Pemasangan | Surface Mount |
Panduan Konfigurasi Pin STM32L072KBU7 32-pin ufqfpn (5 mm × 5 mm)
Konfigurasi pin untuk STM32L072KBU7 (32-pin ufqfpn (5 mm × 5 mm) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk STM32L072KBU7.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
STM32L072KBU7 patut untuk 6 aplikasis: USB-Connected Sensor Node, Battery-Powered Environmental Monitor, USB Firmware-Update Gateway, Compact Industrial Data Logger, Low-Energy Wearable Monitor, Portable Medical Measurement Device.
USB-Connected Sensor Node
The STM32L072KBU7 fits compact USB sensor nodes because its 128 KB flash stores acquisition firmware and USB device code, while the 32 MHz Cortex-M0+ core handles digital conversion and control tasks. Crystal-less USB 2.0 operation can reduce discrete clock-component count and PCB area. The 32-pin UFQFPN package is only 5 mm × 5 mm, allowing the controller, USB connector, sensing circuitry, and power regulator to coexist on a dense board. Designers should validate USB clock-recovery margin, bus-length limits, and EMI with the final cable, connector, and enclosure because those system details determine compliance more than the MCU headline specification.
Disebarkan
Battery-Powered Environmental Monitor
The STM32L072KBU7 suits battery-powered environmental monitoring when low standby energy and fast peripheral processing are both important. Its 32 MHz Cortex-M0+ core can execute sampling, filtering, and local alarm logic, while the STM32L0 ultra-low-power architecture supports duty-cycled operation between measurement events. The 128 KB flash provides headroom for calibration tables, event logs, and field-update firmware. Because the verified excerpts do not provide active or sleep current, battery life must be calculated from manufacturer low-power figures plus sensor, regulator, and communications load; a battery life target should never be based on processor specifications alone.
Disebarkan
USB Firmware-Update Gateway
The STM32L072KBU7 is appropriate for a USB firmware-update gateway that receives field upgrades, validates image integrity, and coordinates a controlled reboot. Its 128 KB flash provides room for a bootloader, USB communication firmware, and application code, and its USB 2.0 crystal-less capability can simplify the interface. The 32 MHz Cortex-M0+ core is fast enough to perform transfer orchestration and basic checksum work. The exact update protocol should include authenticated images, power-loss recovery, and version rollback; those security and resilience features are more important than replacing the MCU with a higher-frequency part.
Disebarkan
Compact Industrial Data Logger
The STM32L072KBU7 can serve as the control processor in a compact industrial data logger that records sensor readings, timestamps events, and transfers data through USB. The 32 MHz Cortex-M0+ core provides sufficient performance for protocol handling and data formatting, and 128 KB of flash can hold firmware and nonvolatile configuration. Its small 5 mm × 5 mm UFQFPN package leaves board area for storage and interface components. Designers should use the exposed pad according to the manufacturer land pattern, provide the recommended supply bypassing, and separate sensitive analog or high-current sections to prevent logger activity from disturbing measurements.
Disebarkan
Low-Energy Wearable Monitor
The STM32L072KBU7 is suitable for a low-energy wearable monitor because the STM32L0 family targets ultra-low-power embedded processing and the 5 mm × 5 mm UFQFPN package minimizes board area. The 128-bit-wide flash configuration described as 128K × 8 provides 128 KB of code storage for movement algorithms, event classification, and communication firmware. A wearable design should keep the radio and analog front end switched except during measurement intervals rather than treating the MCU as the only power consumer. Skin-contact safety, battery protection, antenna coexistence, and regulatory limits remain system-level requirements that the controller specification alone cannot satisfy.
Disebarkan
Portable Medical Measurement Device
The STM32L072KBU7 can control a portable medical measurement device that combines sensor acquisition, a local display or status indicator, and USB data export. Its 32 MHz Cortex-M0+ core supports real-time sampling and control, and 128 KB of flash accommodates measurement routines and a USB interface. Crystal-less USB can reduce board size in a handheld enclosure, although medical designs must validate electrical isolation, leakage current, alarm behavior, and risk controls independently. The MCU grade and temperature limits should also be checked against the intended ambient range before it is used in a clinical accessory where measurement accuracy and fault handling are critical.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk STM32L072KBU7 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | STM32L072KBU6 | STM32L071KBU6 | STM32L072KCU6 | STM32L071KCU6 |
|---|---|---|---|---|---|
| Package | 32-UFQFPN (5x5) | 32-UFQFPN (5x5) - same | 32-UFQFPN (5x5) - same | 32-UFQFPN (5x5) - same | 32-UFQFPN (5x5) - same |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 128 KB | 128 KB | 128 KB | 64 KB (-50%) | 64 KB (-50%) |
| Temperature Grade | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
Penyeberangsung Jelas
- Retains full 128 KB program memory during pin-compatible substitution (vsSTM32L072KCU6)
- Broader temperature grade than the U6 package variant (vsSTM32L072KBU6)
- Uses the STM32L072 feature set rather than the reduced STM32L071 family (vsSTM32L071KBU6)
- Doubles the available flash memory of the 64 KB STM32L072 option (vsSTM32L072KCU6)
Catatan Desain
Route the USB differential pair as a controlled-impedance pair, keep the connector and transceiver path away from switching nodes, and follow the manufacturer layout and exposed-pad guidance. Place input and output bypass capacitors close to their corresponding supply pins and minimize loop area. Crystal-less USB can reduce component count, but it does not eliminate the need for careful return-path planning, connector placement, or EMI validation on the finished board.
Budget the power tree from the complete system rather than the 32 MHz CPU frequency. Select the regulator so its dropout and efficiency meet the 2.5 V or 3.3 V operating requirement across the minimum load, while retaining headroom for the USB transceiver and sensor analog circuitry. Validate active, sleep, and standby current using the manufacturer low-power tables; those values were not included in the verified excerpts and must not be estimated from the MCU clock rate alone.
Do not substitute a 64 KB flash variant without checking the firmware image size and RAM assumptions, because STM32L072KCU6 and STM32L071KCU6 provide 50% less flash than the STM32L072KBU7. Also verify temperature-grade requirements before using a U6 variant. Pin compatibility alone does not guarantee regulatory, peripheral, timing, or firmware compatibility, so each substitution requires a manufacturer-document review.
Use the exposed pad as directed by the manufacturer's package drawing and land-pattern guidance. Its thermal and electrical role must be confirmed rather than assumed, and the copper connection should follow the recommended pattern for both stability and heat spreading. The supplied data contains no power dissipation, junction temperature, or thermal resistance figures, so thermal performance should be calculated from actual utilization and the published package data.
Maklumat Kesediaan
The verified distributor snippets do not provide compliance declarations. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status must be confirmed from the current STMicroelectronics product documentation before qualification.
