STM32L073RZT3 - 32MHz Cortex-M0+ USB MCU | STMicroelectronics
MPN: STM32L073RZT3 ✓ AktifSTM32L073RZT3 Ringkasan
A microcontroller is a semiconductor integrated circuit that integrates a processor core, program memory, data memory, peripherals, and interface circuitry into one package. The STM32L0 series belongs to the Arm Cortex-M0+ microcontroller family and targets embedded control, battery-powered equipment, human-interface devices, sensors, and compact USB-connected products. Its small package also supports space-constrained industrial and consumer equipment.
The STM32L073RZT3 provides 192 KB of Flash and up to 32 MHz processing performance. Its analog resources include one 12-bit ADC with hardware oversampling, two DAC channels, and two ultra-low-power comparators. Timing and control resources include general-purpose 16-bit timers, basic timers, a low-power timer, an RTC, and SysTick. The connectivity feature set includes USB 2.0 crystal-less operation and LCD support.
Two independent watchdogs strengthen system reliability by helping detect runaway firmware and stalled operation. The STM32L0 architecture combines low-power processing with a broad peripheral set, allowing designers to consolidate functions that might otherwise require separate analog, timer, and communication devices. Firmware and software compatibility within the STM32L0 family can also simplify migration between suitable density and temperature-grade options.
Typical uses include compact USB data loggers, industrial sensing nodes, low-power LCD instruments, remote controls, access-control terminals, wearable accessories, and battery-powered measurement equipment. The 64-LQFP package provides accessible peripheral routing on a 10 x 10 mm footprint and is practical for designs built with conventional leaded-package assembly processes rather than the smallest possible land patterns.
Designers should select decoupling capacitors, clocks, programming interfaces, and USB routing according to the manufacturer application guidance. PCB signal integrity is particularly important for USB and high-frequency clock paths. Firmware migration also requires checking the exact pin assignments, peripheral availability, flash organization, SRAM allocation, and device-specific behavior before replacing another MCU.
This product page consolidates the manufacturer specifications, package information, commercial sourcing path, pinout status, and verified drop-in comparison into one engineering-focused reference. It also identifies where alternate density or temperature-grade parts require firmware and qualification review rather than assuming automatic interchangeability.
Pilihan pengganti yang segera untuk STM32L073RZT3 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera STM32L073RZT3 (sama faktor bentuk dan kaki) — berbeza dalam ADC, Comparators, DAC, Package.
STM32L073RZT6
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →STM32L073RZT3 Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 32-bit ultra-low-power microcontroller |
| CPU Core | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz |
| Architecture | 32-bit ARM |
| Flash Memory | 192 KB |
| Program Memory Organization | 192K x 8 |
| SRAM | 20 KB |
| EEPROM | 6 KB |
| ADC | 1 x 12-bit ADC with hardware oversampling |
| DAC | 2 x DAC channels |
| Comparators | 2 x ultra-low-power comparators |
| General-Purpose Timers | 4 x 16-bit timers |
| Basic Timers | 2 x basic timers |
| Low-Power Timer | 1 x LPTIM |
| Real-Time Clock | 1 x RTC |
| Watchdogs | 2 x watchdogs |
| USB Interface | USB 2.0 crystal-less |
| LCD Support | Supported |
| Kemasan | 64-LQFP, 10 x 10 mm |
| Kiraan Pin | 64 pins |
| Jenis Pemasangan | Surface mount |
Panduan Konfigurasi Pin STM32L073RZT3 64-lqfp, 10 x 10 mm
Konfigurasi pin untuk STM32L073RZT3 (64-lqfp, 10 x 10 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk STM32L073RZT3.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
STM32L073RZT3 patut untuk 6 aplikasis: USB Data Loggers, Industrial Sensing Nodes, LCD Instruments, Battery-Powered Sensors, Access-Control Terminals, Portable Measurement Equipment.
USB Data Loggers
The STM32L073RZT3 fits compact USB data loggers because its 32 MHz Arm Cortex-M0+ core can supervise acquisition and storage while USB 2.0 crystal-less connectivity provides a direct device interface. The 192 KB of Flash supports application code, communication firmware, and configuration data, while 20 KB of SRAM accommodates working buffers. Its one 12-bit ADC with hardware oversampling supports analog sensor channels, and two DAC channels can provide stimulus or control signals. Keep USB routing compact, provide the specified transceiver support components, and validate enumeration behavior across the intended host environment.
Industrial Sensing Nodes
For industrial sensing nodes, the STM32L073RZT3 combines a 12-bit oversampling ADC, two comparators, multiple timers, and independent watchdog functions in a low-power MCU. The comparators can perform threshold detection while the timers handle sampling intervals or sensor timing, and the RTC supports time-based records. Its 64-LQFP package keeps the design within a conventional 10 x 10 mm footprint. Designers should confirm analog input ranges and operating voltage limits, maintain separation between sensing and digital return paths, and verify temperature-grade requirements for the installation environment.
LCD Instruments
The STM32L073RZT3 is suitable for compact LCD instruments because the MCU combines LCD support with a 32 MHz Cortex-M0+ processor and extensive timing peripherals. General-purpose 16-bit timers can drive displays or control acquisition timing, while the RTC can maintain timestamps for portable meters and laboratory instruments. The 192 KB of Flash provides room for a graphical interface, calibration tables, and USB firmware. Select the correct LCD segment or controller interface from the pin tables and validate timing, biasing, and contrast behavior on the assembled board.
Battery-Powered Sensors
The STM32L073RZT3 fits battery-powered sensors that need more processing capability than a basic eight-bit controller without adopting a high-power application processor. Its ultra-low-power family positioning, LPTIM, RTC, low-power comparators, and selectable clock resources support duty-cycled measurement designs. The 20 KB of SRAM and 192 KB of Flash are useful for local filtering, event storage, and firmware updates. Determine actual operating current from the complete sleep, wake-up, and analog-conversion sequence, then size the battery from measured duty-cycle behavior rather than a single headline current figure.
Access-Control Terminals
The STM32L073RZT3 can serve as the controller in an access-control terminal requiring local logic, a serial interface, and optional USB connectivity. Its 192 KB of Flash supports protocol handlers and device firmware, while the RTC and two watchdogs improve timestamp reliability and fault recovery. The LCD support may simplify local status displays, and the comparators or ADC can monitor simple external sensor lines. Security-sensitive designs should add the required authentication and communication protections, and firmware updates must include rollback or recovery procedures appropriate to the product risk level.
Portable Measurement Equipment
The STM32L073RZT3 is well matched to portable measurement equipment because it integrates a 32-bit CPU, oversampling ADC, two DAC channels, comparators, precise timers, and USB in one compact package. The DAC channels can generate calibration or excitation signals, while the ADC and comparators support acquisition channels and threshold events. Its 64-LQFP package simplifies assembly compared with ultra-small leadless packages. For accurate measurements, follow the datasheet's ADC reference and layout recommendations, separate analog and digital supplies where practical, and calibrate the analog front end over the intended temperature range.
Data referensi kejuruteraan untuk STM32L073RZT3 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | STM32L073RZT6 |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Package | 64-LQFP 10x10 mm | 64-LQFP 10x10 mm |
Penyeberangsung Jelas
- Integrated USB connectivity in a compact 64-LQFP device (vsSTM32L073RZT6)
- Substantial analog integration reduces external component count (vsSTM32L073RZT6)
- Comprehensive timing and fault-monitoring resources (vsSTM32L073RZT6)
Catatan Desain
Route the USB data and clock nets as short, continuous traces with a geometry that maintains the required controlled impedance. Place USB transceiver support components and their passive networks close to the MCU pins. Keep the USB path away from antenna, switching-power, and high-current actuator routing. A compact ground reference beneath the interface section improves return-path continuity and reduces susceptibility to radiated and conducted interference.
Preserve the analog signal path specified in the manufacturer application guidance. Place the 12-bit ADC input network close to the MCU, use a continuous ground reference beneath the analog section, and keep digital clocks and switching nodes away from sensitive inputs. The ADC's hardware oversampling can improve effective resolution under suitable noise conditions, but it does not correct incorrect grounding, impedance, or reference design.
Do not treat equal package dimensions as proof that two MCU order codes are interchangeable. For the STM32L073RZT3 and STM32L073RZT6, confirm the ordering-code temperature grade, exposed-pin requirements, electrical limits, and exact peripheral assignments in the manufacturer information. Also verify that the firmware image supports the selected device identifier and that production programming, watchdog behavior, and boot options remain unchanged.
Maklumat Kesediaan
Compliance declarations were not stated in the manufacturer page excerpts or datasheet snippet. The automotive qualification status for the exact order code must be confirmed from STMicroelectronics before use in an automotive design.