STMicroelectronics

STM32L073RZT3 - 32MHz Cortex-M0+ USB MCU | STMicroelectronics

Артикул: STM32L073RZT3 ✓ Активен
64-LQFP, 10 x 10 mm Package 32 MHz Speed 192 KB Memory
MOQ: 1 |

STM32L073RZT3 Обзор

STMicroelectronics STM32L073RZT3 is an ultra-low-power 32-bit Arm Cortex-M0+ microcontroller with a 32 MHz CPU, 192 KB of Flash memory, USB connectivity, LCD support, and a 64-LQFP 10 x 10 mm package. The device combines a compact embedded processing platform with analog and timing resources for cost-sensitive, low-power designs.

A microcontroller is a semiconductor integrated circuit that integrates a processor core, program memory, data memory, peripherals, and interface circuitry into one package. The STM32L0 series belongs to the Arm Cortex-M0+ microcontroller family and targets embedded control, battery-powered equipment, human-interface devices, sensors, and compact USB-connected products. Its small package also supports space-constrained industrial and consumer equipment.

The STM32L073RZT3 provides 192 KB of Flash and up to 32 MHz processing performance. Its analog resources include one 12-bit ADC with hardware oversampling, two DAC channels, and two ultra-low-power comparators. Timing and control resources include general-purpose 16-bit timers, basic timers, a low-power timer, an RTC, and SysTick. The connectivity feature set includes USB 2.0 crystal-less operation and LCD support.

Two independent watchdogs strengthen system reliability by helping detect runaway firmware and stalled operation. The STM32L0 architecture combines low-power processing with a broad peripheral set, allowing designers to consolidate functions that might otherwise require separate analog, timer, and communication devices. Firmware and software compatibility within the STM32L0 family can also simplify migration between suitable density and temperature-grade options.

Typical uses include compact USB data loggers, industrial sensing nodes, low-power LCD instruments, remote controls, access-control terminals, wearable accessories, and battery-powered measurement equipment. The 64-LQFP package provides accessible peripheral routing on a 10 x 10 mm footprint and is practical for designs built with conventional leaded-package assembly processes rather than the smallest possible land patterns.

Designers should select decoupling capacitors, clocks, programming interfaces, and USB routing according to the manufacturer application guidance. PCB signal integrity is particularly important for USB and high-frequency clock paths. Firmware migration also requires checking the exact pin assignments, peripheral availability, flash organization, SRAM allocation, and device-specific behavior before replacing another MCU.

This product page consolidates the manufacturer specifications, package information, commercial sourcing path, pinout status, and verified drop-in comparison into one engineering-focused reference. It also identifies where alternate density or temperature-grade parts require firmware and qualification review rather than assuming automatic interchangeability.

Аналоги без доработки для STM32L073RZT3 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с STM32L073RZT3 (тот же форм-фактор и посадочное место) — отличается по ADC, Comparators, DAC, Package.

STMicroelectronics
ADC: 1x 12-bit, 16 channels, with hardware oversampling
Comparators: 2
DAC: 2x 12-bit
Сравнить с STM32L073RZT3 →

STM32L073RZT6

✅ Прямая замена
STMicroelectronics
📦 64-LQFP 10x10 mm
ARM Cortex-M0+ · 32 MHz · 192 KB · 20 KB · 1.8 V to 3.6 V · LQFP-64 (10x10 mm) · 51 · 1x 12-bit, 16 channels, with hardware oversampling

Уточнить цену

Открыть даташит →

STM32L073RZT3 Максимальные параметры и электрические характеристики

Product Type 32-bit ultra-low-power microcontroller
CPU Core Arm Cortex-M0+
Maximum CPU Frequency 32 MHz
Architecture 32-bit ARM
Flash Memory 192 KB
Program Memory Organization 192K x 8
SRAM 20 KB
EEPROM 6 KB
ADC 1 x 12-bit ADC with hardware oversampling
DAC 2 x DAC channels
Comparators 2 x ultra-low-power comparators
General-Purpose Timers 4 x 16-bit timers
Basic Timers 2 x basic timers
Low-Power Timer 1 x LPTIM
Real-Time Clock 1 x RTC
Watchdogs 2 x watchdogs
USB Interface USB 2.0 crystal-less
LCD Support Supported
Корпус 64-LQFP, 10 x 10 mm
Число выводов 64 pins
Тип монтажа Surface mount

Руководство по цоколевке STM32L073RZT3 в корпусе 64-lqfp, 10 x 10 mm

Цоколевка для STM32L073RZT3 (корпус 64-lqfp, 10 x 10 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 64-lqfp, 10 x 10 mm для STM32L073RZT3

Нет подробных данных о распиновке для STM32L073RZT3.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

STM32L073RZT3 подходит для 6 применениеs: USB Data Loggers, Industrial Sensing Nodes, LCD Instruments, Battery-Powered Sensors, Access-Control Terminals, Portable Measurement Equipment.

🔧

USB Data Loggers

The STM32L073RZT3 fits compact USB data loggers because its 32 MHz Arm Cortex-M0+ core can supervise acquisition and storage while USB 2.0 crystal-less connectivity provides a direct device interface. The 192 KB of Flash supports application code, communication firmware, and configuration data, while 20 KB of SRAM accommodates working buffers. Its one 12-bit ADC with hardware oversampling supports analog sensor channels, and two DAC channels can provide stimulus or control signals. Keep USB routing compact, provide the specified transceiver support components, and validate enumeration behavior across the intended host environment.

🏭

Industrial Sensing Nodes

For industrial sensing nodes, the STM32L073RZT3 combines a 12-bit oversampling ADC, two comparators, multiple timers, and independent watchdog functions in a low-power MCU. The comparators can perform threshold detection while the timers handle sampling intervals or sensor timing, and the RTC supports time-based records. Its 64-LQFP package keeps the design within a conventional 10 x 10 mm footprint. Designers should confirm analog input ranges and operating voltage limits, maintain separation between sensing and digital return paths, and verify temperature-grade requirements for the installation environment.

📺

LCD Instruments

The STM32L073RZT3 is suitable for compact LCD instruments because the MCU combines LCD support with a 32 MHz Cortex-M0+ processor and extensive timing peripherals. General-purpose 16-bit timers can drive displays or control acquisition timing, while the RTC can maintain timestamps for portable meters and laboratory instruments. The 192 KB of Flash provides room for a graphical interface, calibration tables, and USB firmware. Select the correct LCD segment or controller interface from the pin tables and validate timing, biasing, and contrast behavior on the assembled board.

🔋

Battery-Powered Sensors

The STM32L073RZT3 fits battery-powered sensors that need more processing capability than a basic eight-bit controller without adopting a high-power application processor. Its ultra-low-power family positioning, LPTIM, RTC, low-power comparators, and selectable clock resources support duty-cycled measurement designs. The 20 KB of SRAM and 192 KB of Flash are useful for local filtering, event storage, and firmware updates. Determine actual operating current from the complete sleep, wake-up, and analog-conversion sequence, then size the battery from measured duty-cycle behavior rather than a single headline current figure.

🔐

Access-Control Terminals

The STM32L073RZT3 can serve as the controller in an access-control terminal requiring local logic, a serial interface, and optional USB connectivity. Its 192 KB of Flash supports protocol handlers and device firmware, while the RTC and two watchdogs improve timestamp reliability and fault recovery. The LCD support may simplify local status displays, and the comparators or ADC can monitor simple external sensor lines. Security-sensitive designs should add the required authentication and communication protections, and firmware updates must include rollback or recovery procedures appropriate to the product risk level.

📊

Portable Measurement Equipment

The STM32L073RZT3 is well matched to portable measurement equipment because it integrates a 32-bit CPU, oversampling ADC, two DAC channels, comparators, precise timers, and USB in one compact package. The DAC channels can generate calibration or excitation signals, while the ADC and comparators support acquisition channels and threshold events. Its 64-LQFP package simplifies assembly compared with ultra-small leadless packages. For accurate measurements, follow the datasheet's ADC reference and layout recommendations, separate analog and digital supplies where practical, and calibrate the analog front end over the intended temperature range.

What is the STM32L073RZT3?
The STM32L073RZT3 is an ultra-low-power, 32-bit Arm Cortex-M0+ microcontroller from STMicroelectronics with a 32 MHz CPU, 192 KB of Flash, 20 KB of SRAM, and 6 KB of EEPROM. According to the manufacturer datasheet, it also includes one 12-bit ADC, two DAC channels, two comparators, USB 2.0 crystal-less connectivity, LCD support, and extensive timer resources in a 64-LQFP package.
What are the key specifications of STM32L073RZT3 that engineers should know?
The STM32L073RZT3 combines a 32 MHz Arm Cortex-M0+ core with 192 KB of Flash, 20 KB of SRAM, and 6 KB of EEPROM. The manufacturer datasheet identifies one 12-bit ADC with hardware oversampling, two DAC channels, two ultra-low-power comparators, four 16-bit general-purpose timers, two basic timers, one LPTIM, one RTC, two watchdogs, USB 2.0 crystal-less operation, and LCD support in a 64-LQFP 10 x 10 mm package.
Where can I download the STM32L073RZT3 datasheet PDF?
The official STM32L073RZT3 datasheet is available from the STMicroelectronics product page at https://www.st.com/resource/en/datasheet/stm32l073rz.pdf. It covers the STM32L073x8, STM32L073xB, and STM32L073xZ families, including electrical characteristics, memory, peripherals, pin definitions, package information, and application guidance. Use the pin-description and package drawings for PCB implementation.
Where can I find the STM32L073RZT3 pinout?
The STM32L073RZT3 pinout is documented in the pin-description section and package drawings of the manufacturer datasheet. The device uses a 64-LQFP 10 x 10 mm package, so the board design must follow the 64-pin numbering shown in those drawings rather than assigning functions from a different STM32L0 density. Confirm every alternate-function mapping against the exact device and firmware configuration before routing the PCB.
What peripherals are integrated into the STM32L073RZT3?
The STM32L073RZT3 integrates one 12-bit ADC with hardware oversampling, two DAC channels, two ultra-low-power comparators, four general-purpose 16-bit timers, two basic timers, one low-power timer, one RTC, SysTick, and two watchdogs. The manufacturer datasheet also identifies USB 2.0 crystal-less connectivity and LCD support, giving the device a broad peripheral set for compact embedded and low-power control systems.
Is the STM32L073RZT3 suitable for USB-connected embedded devices?
The STM32L073RZT3 is suitable for compact USB-connected embedded devices because it includes USB 2.0 crystal-less connectivity and a 32 MHz Arm Cortex-M0+ core. Its 192 KB of Flash supports substantially more firmware than a basic USB controller, while the ADC, DACs, comparators, timers, and LCD support reduce the need for external components in instrument and control designs.
STM32L073RZT3 vs STM32L073RZT6 - which is better for my design?
The STM32L073RZT3 and STM32L073RZT6 share the STM32L073RZ device family and 64-LQFP format, but the temperature-grade suffix must be checked against the operating environment. The manufacturer ordering information distinguishes the grade and qualification conditions. Choose the exact suffix whose specified temperature range and qualification requirements match the product rather than assuming interchangeability from package similarity alone.
When should I choose the STM32L073RZT3 over another STM32L0 microcontroller?
Choose the STM32L073RZT3 when a design needs 192 KB of Flash, 20 KB of SRAM, USB 2.0 crystal-less connectivity, LCD support, and a compact 64-LQFP assembly footprint. Select a lower-density member when those resources are unnecessary, or a higher-density member when more memory or additional peripherals are required. Verify software support, pin availability, clock configuration, and board compatibility before changing MCU order codes.
What can replace the STM32L073RZT3?
The closest identified drop-in candidate is the STM32L073RZT6 because it belongs to the same STM32L073RZ family and uses the same 64-LQFP package. The manufacturer ordering information must be checked for the exact temperature grade and operating conditions before substitution. Parts with different density, package, pinout, or firmware requirements should not be treated as drop-in replacements without a full board and software review.
Is the STM32L073RZT6 a drop-in replacement for the STM32L073RZT3?
The STM32L073RZT6 is a same-family, same-package candidate for the STM32L073RZT3, but final interchangeability depends on the ordering-grade temperature range and the target product's environmental requirements. Both use the STM32L073RZ family and 64-LQFP format. Confirm the complete manufacturer ordering information, exposed-pin requirements, firmware configuration, and production qualification before approving a substitution.
What is the best STMicroelectronics equivalent for the STM32L073RZT3?
The best identified STMicroelectronics equivalent is the STM32L073RZT6 because it retains the STM32L073RZ family construction and 64-LQFP package while occupying the same key device class. No verified cross-manufacturer pin-identical substitute was established for the complete 64-pin USB microcontroller. A different vendor's MCU should therefore be treated as a new design unless its complete pinout, electrical limits, memory map, and firmware requirements are independently proven equivalent.
Where can I buy the STM32L073RZT3?
The STM32L073RZT3 can be requested through the Request a Quote form on this page, where the exact suffix, quantity, delivery schedule, and packaging requirements should be stated. The manufacturer product page is https://www.st.com/en/microcontrollers-microprocessors/stm32l073rz.html. Confirm current availability and lead time through the quote form rather than relying on a static distributor listing or an unconfirmed inventory quantity.
What is the price of the STM32L073RZT3?
Use the Request a Quote form on this page for the current STM32L073RZT3 price, minimum order quantity, and quantity-break structure. Pricing for this exact 64-LQFP suffix can change with market conditions, order quantity, and requested delivery terms. The structured pricing section on this page is the appropriate place to review any current quote-based offering.
What is the lead time and stock status for the STM32L073RZT3?
Request the current STM32L073RZT3 lead time and stock status through the Request a Quote form on this page, including the required quantity and target delivery date. Do not treat a distributor search result or an approximate inventory count as a firm allocation. STMicroelectronics' STM32L073RZ product page can be used to confirm the product family and obtain official contact options.
How should STM32L073RZT3 be designed for USB and low-noise analog operation?
Route USB data and clock signals as short, continuous traces with a controlled impedance and place the USB transceiver network components where the manufacturer reference layout specifies. For analog measurements, use separate analog and digital return paths, keep ADC inputs away from switching nodes, and provide local decoupling at supply pins. The ADC's hardware oversampling can improve effective resolution, but it does not remove the need for careful grounding and filtering.

Справочные инженерные данные для STM32L073RZT3 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the STM32L073RZT3 for compact embedded products that require USB connectivity, LCD support, a 12-bit oversampling ADC, two DAC channels, and enough memory for 192 KB of firmware and 20 KB of SRAM. Its 64-LQFP 10 x 10 mm package is especially useful when the assembly process is better suited to leaded packages than to very small leadless land patterns. The STM32L073RZT6 is the closest identified same-family drop-in candidate when its ordering-grade temperature conditions suit the application. Do not approve that substitution until the exact grade and environmental requirements are confirmed. Neither part should be replaced by a different-density STM32L0 device without reviewing memory, pin availability, and firmware support. For cross-manufacturer sourcing, require a complete pin, electrical, clock, and software compatibility review rather than relying only on package similarity.

Сравнение с аналогами

Параметр Этот товар STM32L073RZT6
Brand STMicroelectronics STMicroelectronics
Package 64-LQFP 10x10 mm 64-LQFP 10x10 mm

Ключевые отличия

  • Integrated USB connectivity in a compact 64-LQFP device (против STM32L073RZT6)
  • Substantial analog integration reduces external component count (против STM32L073RZT6)
  • Comprehensive timing and fault-monitoring resources (против STM32L073RZT6)

Заметки по проектированию

Route the USB data and clock nets as short, continuous traces with a geometry that maintains the required controlled impedance. Place USB transceiver support components and their passive networks close to the MCU pins. Keep the USB path away from antenna, switching-power, and high-current actuator routing. A compact ground reference beneath the interface section improves return-path continuity and reduces susceptibility to radiated and conducted interference.

Preserve the analog signal path specified in the manufacturer application guidance. Place the 12-bit ADC input network close to the MCU, use a continuous ground reference beneath the analog section, and keep digital clocks and switching nodes away from sensitive inputs. The ADC's hardware oversampling can improve effective resolution under suitable noise conditions, but it does not correct incorrect grounding, impedance, or reference design.

Do not treat equal package dimensions as proof that two MCU order codes are interchangeable. For the STM32L073RZT3 and STM32L073RZT6, confirm the ordering-code temperature grade, exposed-pin requirements, electrical limits, and exact peripheral assignments in the manufacturer information. Also verify that the firmware image supports the selected device identifier and that production programming, watchdog behavior, and boot options remain unchanged.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

Compliance declarations were not stated in the manufacturer page excerpts or datasheet snippet. The automotive qualification status for the exact order code must be confirmed from STMicroelectronics before use in an automotive design.

Данные проверены: 2026-11-14 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

STM32L073RZT3 datasheet STM32L073RZT3 pinout STM32L073RZT3 datasheet pdf STMicroelectronics STM32L073RZT3 STM32L073RZT3 32MHz Cortex-M0+ STM32L073RZT3 64-LQFP pinout STM32L073RZT3 USB microcontroller STM32L073RZT3 vs STM32L073RZT6 STM32L073RZT3 equivalent STM32L073RZT3 replacement STM32L073RZT3 price STM32L073RZT3 stock STM32L073RZT3 application circuit

Связанные компоненты & термины

STMicroelectronics STM32L073RZT3 STM32L073RZT6 STM32L073RZ Arm Cortex-M0+ microcontroller MCU embedded microcontroller semiconductor 32-bit architecture USB 2.0 USB LCD controller 12-bit ADC hardware oversampling digital-to-analog converter ultra-low-power comparator low-power timer real-time clock watchdog 64-LQFP LQFP package surface-mount package 192 KB Flash 20 KB SRAM
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ