STM32L4S7VIT6 - 120MHz Cortex-M4 2MB MCU | STMicroelectronics
MPN: STM32L4S7VIT6 ✓ AktifSTM32L4S7VIT6 Ringkasan
An ultra-low-power microcontroller is an embedded semiconductor designed to execute control, sensing, communications, and data-processing tasks while minimizing energy consumption. The STM32L4+ family combines the Arm Cortex-M4 core hierarchy of RISC processor, 32-bit microcontroller, embedded controller, and power-management-oriented system-on-chip. This makes the STM32L4S7VIT6 appropriate for industrial equipment, battery-powered instruments, USB-connected products, and low-power display or sensor systems.
Key features include a 120 MHz Cortex-M4 core with floating-point unit, 2 MB of Flash, 640 KB of SRAM, USB OTG, digital filter and sigma-delta modulator support, LCD-TFT controller capability, 12-bit ADCs, and hardware AES-256 and HASH functions. The combination of substantial internal memory and security peripherals reduces the need for external memory in compact embedded designs while supporting encrypted communication and data-handling workflows.
The device is based on the STM32L4+ architecture and includes a high-performance 32-bit Arm Cortex-M4 core. Its operating-voltage range supports low-voltage systems, while its 120 MHz maximum clock rate provides useful computational headroom for protocol handling, control loops, display management, and digital signal filtering. The 100-LQFP package exposes a broad set of GPIO and peripheral functions without requiring a fine-pitch BGA layout.
Typical applications include industrial sensor controllers, compact USB data loggers, medical and laboratory instruments, LCD-TFT user interfaces, low-power edge nodes, and DFSDM-based measurement systems. USB OTG supports USB-connected configuration and data transfer, while the LCD-TFT interface is useful for local graphical displays. The hardware AES-256 and HASH blocks are valuable in designs that require cryptographic acceleration without burdening the CPU.
PCB design should preserve clean supply decoupling and controlled signal routing around the 100-pin LQFP device. Place the required supply capacitors close to their power and ground pins, use short ground returns, and route high-speed or sensitive signals away from noisy switching nodes. Confirm every alternate-function assignment and peripheral pin against the manufacturer pin description before finalizing the schematic.
This page combines the manufacturer product specifications, exact package and memory details, sourcing guidance, compatible family choices, and practical design considerations. It is structured to help engineers identify the correct STM32L4S7VIT6 configuration, assess firmware and pin compatibility, and move confidently into schematic and PCB design.
Pilihan pengganti yang segera untuk STM32L4S7VIT6 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera STM32L4S7VIT6 (sama faktor bentuk dan kaki) — berbeza dalam Package, RoHS Status, Flash Memory, Operating Temperature Range, Processor Core.
STM32L4S5VIT6
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →STM32L4S9VIT6
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
STM32L476VIT6
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
STM32L496VIT6
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
STM32L4R7VIT6
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →STM32L4S7VIT6 Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | Arm Cortex-M4 with FPU |
| Maximum CPU Frequency | 120 MHz |
| Internal Flash Memory | 2 MB (2M x 8 bits) |
| SRAM | 640 KB |
| Operating Voltage Range | 1.71 V to 3.6 V |
| Gambaran Suhu Operasi | -40°C to +85°C |
| ADC Resolution | 12 bits |
| ADC Quantity | 2 |
| Kemasan | 100-pin LQFP (14 x 14 mm) |
| Jenis Pemasangan | Surface mount |
| USB Interface | USB OTG |
| Digital Filter Interface | DFSDM supported |
| Display Controller | LCD-TFT supported |
| Hardware Encryption | AES-256 |
| Hash Accelerator | HASH supported |
| Instruction Set | Arm 32-bit RISC |
| Status RoHS | Compliant |
Panduan Konfigurasi Pin STM32L4S7VIT6 100-pin lqfp (14 x 14 mm)
Konfigurasi pin untuk STM32L4S7VIT6 (100-pin lqfp (14 x 14 mm) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk STM32L4S7VIT6.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
STM32L4S7VIT6 patut untuk 6 aplikasis: Industrial Sensor Controller, USB Data Logger, Battery-Powered IoT Node, LCD-TFT Human Interface, DFSDM Precision Measurement, Secure Portable Instrument.
Industrial Sensor Controller
The STM32L4S7VIT6 fits industrial sensing designs that require a 120 MHz Cortex-M4 core, 2 MB of Flash, and 640 KB of SRAM on a 3.3 V-class supply. Its two 12-bit ADCs provide the basis for analog measurement, while the 1.71 V to 3.6 V operating range supports low-energy sensor conditioning and portable instrumentation. The device is placed directly on the main control board, where its Cortex-M4 processing capacity can run sampling, filtering, compensation, diagnostics, and communications concurrently. Compared with a smaller 8-bit controller, the 32-bit architecture and larger memory reserve improve algorithm headroom. The -40°C to +85°C rating also supports industrial enclosure conditions, although sensor accuracy and EMC performance still depend on the analog front end, layout, and calibration method.
Disebarkan
USB Data Logger
The STM32L4S7VIT6 is suitable for a USB-connected logger because it combines USB OTG, a 120 MHz Arm Cortex-M4 core, 2 MB of Flash, and 640 KB of SRAM. The microcontroller can collect sensor readings, format records, maintain timestamps, and expose data through USB while retaining enough memory for application code and buffering. Its 100-pin LQFP package also provides a broad selection of GPIO, communications, and timer connections for sensors and external storage. The 1.71 V to 3.6 V operating range allows integration with regulated low-voltage systems. During layout, place USB data lines as a controlled impedance pair, provide the required connector-side protection, and keep switching supplies and high-current peripherals away from the USB signal path to reduce data-integrity risk.
Disebarkan
Battery-Powered IoT Node
The STM32L4S7VIT6 supports compact IoT nodes that must balance processing capability with low-voltage operation and energy-conscious design. Its STM32L4+ architecture provides a 120 MHz Cortex-M4 core for protocol and sensor-processing tasks, while the 1.71 V to 3.6 V range permits direct use of suitably regulated low-energy supplies. The 2 MB of Flash can hold substantial application firmware, and the hardware AES-256 and HASH blocks accelerate security operations that would otherwise consume processor time. Designers should still select the appropriate low-power mode, disable unused peripherals, and manage sensor duty cycles because the microcontroller specification alone does not determine battery life. A compact LQFP-100 implementation also requires careful decoupling and exposed-ground planning to keep radio or sensor circuitry free from switching noise.
Disebarkan
LCD-TFT Human Interface
The STM32L4S7VIT6 is well matched to compact LCD-TFT interfaces because the manufacturer identifies LCD-TFT support alongside a 120 MHz Cortex-M4 core and 2 MB of Flash. The controller can drive local graphical content, process touch or control inputs, and manage device-state logic without relying on a separate display processor. Its 640 KB of SRAM provides room for graphics buffers and application state, while two 12-bit ADCs can support analog controls or sensor inputs around the display. The 100-pin LQFP exposes GPIO and communication resources needed for buttons, encoders, and external controllers. In implementation, match the LCD interface voltage, timing, and pin mapping to the manufacturer documentation, and keep pixel-clock traces short and properly terminated to reduce visible artifacts or data errors.
Disebarkan
DFSDM Precision Measurement
The STM32L4S7VIT6 is appropriate for measurement systems using the DFSDM digital filter interface. DFSDM is designed to pair sigma-delta modulators with digital filtering, allowing analog front ends to be sampled by a microcontroller without implementing the complete modulator and filter in discrete logic. The 120 MHz Cortex-M4 core can supervise acquisition, perform system corrections, and handle communications, while 2 MB of Flash accommodates acquisition and filtering firmware. The two 12-bit ADCs provide additional measurement channels for supervisory or diagnostic functions. Board design should pay close attention to analog and digital grounding, modulator clock routing, and isolation between sensitive sensor paths and high-current outputs. Use the exact DFSDM pin mapping and recommended external-network values from the manufacturer documentation before releasing the layout.
Disebarkan
Secure Portable Instrument
The STM32L4S7VIT6 fits portable laboratory, medical, and diagnostic instruments that need responsive control alongside hardware-assisted security. Its 120 MHz Arm Cortex-M4 core with FPU supports signal processing and responsive user-interface logic, while AES-256 and HASH offload cryptographic workloads. The 2 MB of Flash and 640 KB of SRAM allow substantial firmware and working data to remain on-chip, helping simplify a compact portable architecture. The 100-pin LQFP package provides mixed-signal connectivity for sensors, displays, and communications, and the -40°C to +85°C rating supports industrial and controlled clinical-instrument environments. Designers should isolate sensitive analog paths, validate firmware update and key-storage procedures, and confirm that the intended USB and wireless interfaces are correctly assigned in the exact package pin table.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk STM32L4S7VIT6 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | STM32L4S5VIT6 | STM32L4S9VIT6 | STM32L476VIT6 | STM32L496VIT6 |
|---|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) |
| CPU Core | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU | Arm Cortex-M4 with FPU |
Penyeberangsung Jelas
- Higher internal memory in the selected STM32L4+ configuration (vsSTM32L4S5VIT6)
- Same 120 MHz Cortex-M4 performance class with broader S9 feature potential (vsSTM32L4S9VIT6)
- Explicit 2 MB Flash capacity supports larger embedded applications (vsSTM32L476VIT6)
Catatan Desain
Design the 1.71 V to 3.6 V supply rail so it remains within the STM32L4S7VIT6 operating limits during startup, load transitions, and peripheral operation. Place the manufacturer-recommended input and bulk capacitors directly beside their corresponding power and ground pins, with short, low-inductance connections. Separate sensitive analog supplies from switching or high-current outputs where the pin architecture permits it. Verify the complete regulator tolerance, startup ramp, and total rail droop rather than checking only the nominal 3.3 V level.
Use the exact 100-pin LQFP pin table and land pattern when assigning nets and defining the footprint. A matching package name alone does not guarantee that two related STM32L4+ devices expose identical peripheral functions on every lead. Route USB, DFSDM, LCD-TFT, and timer signals according to their signal-class requirements, preserve ground-plane continuity under the device, and place decoupling before fanout into long traces. A PCB assembly review should compare every programmed pin against the selected device's alternate-function table.
Do not treat the STM32L4S7VIT6 as a universal STM32L4 substitution merely because related devices use an LQFP-100 package. Memory density, USB configuration, security peripherals, DFSDM support, LCD functions, boot behavior, and firmware initialization can differ across the STM32L4, STM32L4+, STM32G4, and other Cortex-M4 families. Before changing the BOM, compare the exact pin table, electrical limits, peripheral feature set, startup sequence, and device-family software support for every affected board.
Keep crystal, ADC, DFSDM, and other timing-sensitive networks close to their associated controller pins, and keep their return paths within a continuous ground region. USB differential pairs should maintain consistent geometry and be routed away from switching nodes and high-current return paths. For analog measurements, partition the board according to signal type and provide a deliberate return-current path beneath sensitive interconnects. These layout practices are especially important in a 14 x 14 mm LQFP design where the pin escape can otherwise create long, tightly coupled routes.
Maklumat Kesediaan
RoHS compliance is identified in the exact component listing. REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statuses were not identified and therefore remain unknown.