STM8L101K3U6TR - 8-Bit 16MHz Ultra-Low-Power MCU | STMicroelectronics
MPN: STM8L101K3U6TR ✓ AktifSTM8L101K3U6TR Ringkasan
An ultra-low-power microcontroller is designed to balance processing capability with restricted energy consumption. The STM8L101 family belongs to the STM8L low-power product line and combines a compact CISC architecture, efficient peripheral integration and low-voltage operation. This makes the family suitable for compact embedded products that perform local control, measurement or communication while spending substantial operating time in low-power states.
The STM8L101K3U6TR includes multifunction timers, comparators, USART, SPI and I2C interfaces. These peripherals allow a small system to consolidate several discrete functions and reduce board area. Its maximum clock frequency of 16 MHz supports responsive control tasks, while the enhanced STM8 core provides up to 16 MIPS. The 8 KB Flash configuration is intended for firmware focused on embedded control rather than data-heavy applications.
The device belongs to the STM8L101x1, STM8L101x2 and STM8L101x3 low-power family. Its CISC architecture provides direct addressing, compact instruction representation and a 24-bit linear addressing space. Combined with integrated serial interfaces and low-voltage operation, this architecture supports designs that need deterministic control behavior without the resource demands of a larger application processor.
Typical applications include battery-operated sensor nodes, compact industrial controllers, low-power remote controls, small household appliances and embedded measurement modules. USART and SPI support connection to sensors, transceivers or external memory, while I2C is suitable for low-pin-count peripheral buses. Comparators and timers can support direct sensing, timing and signal-conditioning tasks.
Designers should pay attention to the 1.65 V to 3.6 V operating range when selecting external components and level shifters. The 32-UFQFPN footprint also requires a compact, exposed-pad-aware PCB land pattern and careful thermal-via layout. Use the manufacturer pin description and package drawing when assigning tracks, programming the device and connecting its power rails.
This page combines the manufacturer family information, verified distributor specifications, package details and practical replacement guidance. It also highlights where identical package variants are appropriate and where software, peripheral or qualification differences require engineering review before substitution.
Pilihan pengganti yang segera untuk STM8L101K3U6TR — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera STM8L101K3U6TR (sama faktor bentuk dan kaki) — berbeza dalam Flash Memory, Package, Product Type, Package Dimensions, Serial Interfaces.
STM8L101K3T6TR
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →STM8L101G3U6TR
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →STM8L101G2U6TR
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →STM8L101K3U6TR Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 8-bit ultra-low-power microcontroller |
| CPU Architecture | Enhanced STM8 CISC core |
| Word Size | 8 bit |
| Maximum CPU Frequency | 16 MHz |
| Maximum Performance | 16 MIPS at 16 MHz |
| Flash Memory | 8 KB (8K x 8) |
| Operating Voltage Range | 1.65 V to 3.6 V |
| Gambaran Suhu Operasi | -40 °C to +85 °C |
| Kemasan | 32-UFQFPN (5 mm x 5 mm) |
| Jenis Pemasangan | Surface mount |
| Integrated Timers | Multifunction timer |
| Integrated Comparators | Comparator |
| Serial Interface - USART | USART |
| Serial Interface - SPI | SPI |
| Serial Interface - I2C | I2C |
| Addressing Space | 24-bit linear address space |
| Shipping Format | Tape and reel |
Panduan Konfigurasi Pin STM8L101K3U6TR 32-ufqfpn (5 mm x 5 mm)
Konfigurasi pin untuk STM8L101K3U6TR (32-ufqfpn (5 mm x 5 mm) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk STM8L101K3U6TR.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
STM8L101K3U6TR patut untuk 6 aplikasis: Battery-Powered Sensor Nodes, Low-Power Industrial Control Modules, Smart Home Controls, Battery-Powered Remote Controls, Portable Measurement Instruments, Small Appliance Control Boards.
Battery-Powered Sensor Nodes
The STM8L101K3U6TR fits compact sensor nodes because its low-voltage 1.65 V to 3.6 V operating range complements energy-limited systems. The 16 MHz STM8 core can execute acquisition, filtering and control tasks, while the 8 KB Flash stores application firmware without requiring a larger memory device. I2C and SPI provide practical links to sensors and external converters. Designers should select the device operating mode, peripheral clocking and duty cycle around the battery load rather than treating the maximum CPU frequency as continuous power consumption.
Low-Power Industrial Control Modules
The STM8L101K3U6TR can serve as the local controller in a small industrial sensing or actuation module. Its multifunction timers support periodic measurement and output generation, while comparators can perform threshold detection on external analog signals. USART, SPI and I2C allow connection to remote sensors, communication transceivers or expansion devices from the same 32-UFQFPN controller. The -40 °C to +85 °C rating supports industrial temperature conditions, but designers must still control board temperature and apply proper grounding and isolation practices.
Smart Home Controls
The STM8L101K3U6TR is appropriate for compact smart-home endpoints such as environmental controllers, door controls or appliance interfaces. Its 8-bit architecture and 8 KB Flash are well matched to simple state machines, button handling and periodic sensor updates, while I2C supports low-speed peripherals. The device can remain in a low-power state between interactions to conserve energy. Firmware should define wake conditions and debounce timing carefully, because repeated peripheral activity can consume more energy than the processor's idle state alone.
Battery-Powered Remote Controls
The STM8L101K3U6TR can implement a low-energy remote-control transmitter using its compact package and low-voltage operation. The enhanced STM8 core at up to 16 MHz can scan inputs, encode commands and manage low-power sleep intervals, while USART can connect to a radio or communications module. Compared with a larger microcontroller, the 8 KB Flash option emphasizes firmware economy. RF carrier timing, button wake-up behavior and battery leakage should be evaluated together because the MCU may not be the dominant power consumer in the finished transmitter.
Portable Measurement Instruments
The STM8L101K3U6TR is suitable for compact handheld measurement instruments that combine local sensing, display control and serial data transfer. Its integrated comparators can support threshold and waveform-detection functions, while timers can improve repetitive measurement timing. SPI can connect to higher-speed converters or memory, and I2C is suitable for slower sensors or displays. Because the MCU has only 8 KB of Flash, buffering and complex user-interface code must be sized carefully; external memory or a higher-density family member may be preferable for data-heavy instruments.
Small Appliance Control Boards
The STM8L101K3U6TR can control compact household or commercial appliances where the required logic includes timing, button input, motor or heater control, and status communication. Its multifunction timers and comparators reduce the need for separate support ICs, and the 32-UFQFPN package limits board footprint. The 1.65 V to 3.6 V operating range requires compatible power regulation and signal levels. Safety-critical loads must use suitable isolation and protection because the MCU itself is not a substitute for independent thermal or overcurrent protection.
Data referensi kejuruteraan untuk STM8L101K3U6TR — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | STM8L101K3T6TR | STM8L101G3U6TR | STM8L101G2U6TR |
|---|---|---|---|---|
| Package | 32-UFQFPN (5 mm x 5 mm) | 32-UFQFPN (5 mm x 5 mm) | 32-UFQFPN (5 mm x 5 mm) | 32-UFQFPN (5 mm x 5 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Product Family | STM8L101K3 | STM8L101K3 | STM8L101G3 | STM8L101G2 |
Penyeberangsung Jelas
- Direct same-package family alternative (vsSTM8L101K3T6TR)
- Low-voltage operation in a compact package (vsSTM8L101G3U6TR)
- Integration reduces support-component count (vsSTM8L101G2U6TR)
Catatan Desain
Use the manufacturer land pattern for the 32-UFQFPN package and verify pin 1 orientation against the PCB silkscreen. Keep the exposed pad connected to the appropriate ground plane as directed in the package documentation, and place thermal vias within the recommended land pattern. Short power and ground connections help minimize voltage drop during rapid switching of the digital peripherals.
Design the supply network for the documented 1.65 V to 3.6 V operating range, including tolerance, startup behavior and the voltage required by every attached peripheral. Place the required bypass capacitors close to the device supply pins and keep the exposed-pad return path low impedance. Review the internal regulator and external component configuration in the manufacturer reference design when power-gating is used.
Route USART, SPI and I2C signals away from switching nodes and noisy analog inputs. I2C requires suitable pull-up placement, while SPI clock routing should account for slave-device trace length and loading. For low-energy designs, disable unused peripherals and peripheral clocks where permitted to reduce switching activity and improve the effective standby and active-current budget.
Do not assume that another STM8L101 ordering code is interchangeable solely because it uses the same 32-UFQFPN footprint. Check the exact pin table, Flash and RAM density, peripheral allocation, temperature range, option-byte configuration and device identifier. After substitution, retest startup, clock switching, low-power wake-up and every peripheral connected to the affected pins.
Maklumat Kesediaan
The manufacturer product page and distributor listings do not state the requested environmental, automotive or material-compliance classifications.