STMicroelectronics

STM8L101K3U6TR - 8-Bit 16MHz Ultra-Low-Power MCU | STMicroelectronics

N.º da peça: STM8L101K3U6TR ✓ Ativo
1.65 V to 3.6 V Vdss 32-UFQFPN (5 mm x 5 mm) Package 16 MHz Speed 8 KB (8K x 8) Memory
MOQ: 1 |

STM8L101K3U6TR Visão geral

The STMicroelectronics STM8L101K3U6TR is an 8-bit ultra-low-power microcontroller with an enhanced STM8 CPU core, operation up to 16 MHz and performance up to 16 MIPS. It provides 8 KB of Flash memory and is offered in a 32-UFQFPN package measuring 5 mm by 5 mm. The component operates across a 1.65 V to 3.6 V supply range and is specified for temperatures from -40 °C to +85 °C.

An ultra-low-power microcontroller is designed to balance processing capability with restricted energy consumption. The STM8L101 family belongs to the STM8L low-power product line and combines a compact CISC architecture, efficient peripheral integration and low-voltage operation. This makes the family suitable for compact embedded products that perform local control, measurement or communication while spending substantial operating time in low-power states.

The STM8L101K3U6TR includes multifunction timers, comparators, USART, SPI and I2C interfaces. These peripherals allow a small system to consolidate several discrete functions and reduce board area. Its maximum clock frequency of 16 MHz supports responsive control tasks, while the enhanced STM8 core provides up to 16 MIPS. The 8 KB Flash configuration is intended for firmware focused on embedded control rather than data-heavy applications.

The device belongs to the STM8L101x1, STM8L101x2 and STM8L101x3 low-power family. Its CISC architecture provides direct addressing, compact instruction representation and a 24-bit linear addressing space. Combined with integrated serial interfaces and low-voltage operation, this architecture supports designs that need deterministic control behavior without the resource demands of a larger application processor.

Typical applications include battery-operated sensor nodes, compact industrial controllers, low-power remote controls, small household appliances and embedded measurement modules. USART and SPI support connection to sensors, transceivers or external memory, while I2C is suitable for low-pin-count peripheral buses. Comparators and timers can support direct sensing, timing and signal-conditioning tasks.

Designers should pay attention to the 1.65 V to 3.6 V operating range when selecting external components and level shifters. The 32-UFQFPN footprint also requires a compact, exposed-pad-aware PCB land pattern and careful thermal-via layout. Use the manufacturer pin description and package drawing when assigning tracks, programming the device and connecting its power rails.

This page combines the manufacturer family information, verified distributor specifications, package details and practical replacement guidance. It also highlights where identical package variants are appropriate and where software, peripheral or qualification differences require engineering review before substitution.

Alternativas drop-in para STM8L101K3U6TR — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com STM8L101K3U6TR (mesmo formato e footprint) — diferindo em Flash Memory, Package, Product Type, Package Dimensions, Serial Interfaces.

STMicroelectronics
Flash Memory: 4 KB (4K x 8)
Package: 28-pin UFQFPN
Package Dimensions: 4 x 4 mm
Comparar com STM8L101K3U6TR →
STMicroelectronics
Flash Memory: 8 KB
Package: 28-pin UFQFPN
Package Dimensions: 4 mm × 4 mm
Comparar com STM8L101K3U6TR →
STMicroelectronics
Flash Memory: 8 KB
Package: 32-LQFP, 7 x 7 mm
Product Type: 8-bit ultralow-power microcontroller
Comparar com STM8L101K3U6TR →

STM8L101K3T6TR

✅ Drop-In
STMicroelectronics
📦 32-UFQFPN (5 mm x 5 mm)
8-bit ultralow-power microcontroller · STM8L EnergyLite · 16 MHz · 8 KB · 1.65 V to 3.6 V · 18 · USART, SPI, I2C · Multifunction timers and comparators

Consulte o preço

Ver ficha técnica →

STM8L101G3U6TR

✅ Drop-In ⚠️ Especificações não verificadas
STMicroelectronics
📦 32-UFQFPN (5 mm x 5 mm)
8-bit ultra-low-power microcontroller · STM8L101x3 · 16 MHz · Up to 16 MIPS at 16 MHz · 8 KB · CISC · 24-bit linear addressing · 1.8 V, 2.5 V, or 3.3 V

Consulte o preço

Ver ficha técnica →

STM8L101G2U6TR

✅ Drop-In ⚠️ Especificações não verificadas
STMicroelectronics
📦 32-UFQFPN (5 mm x 5 mm)
8-bit ultra-low-power microcontroller · STMicroelectronics · 16 MHz · 16 MIPS at 16 MHz · 4 KB (4K x 8) · 1.65 V to 3.6 V · 18 ports · 28-pin UFQFPN

Consulte o preço

Ver ficha técnica →

STM8L101K3U6TR Classificações máximas e características elétricas

Product Type 8-bit ultra-low-power microcontroller
CPU Architecture Enhanced STM8 CISC core
Word Size 8 bit
Maximum CPU Frequency 16 MHz
Maximum Performance 16 MIPS at 16 MHz
Flash Memory 8 KB (8K x 8)
Operating Voltage Range 1.65 V to 3.6 V
Faixa de temperatura de operação -40 °C to +85 °C
Encapsulamento 32-UFQFPN (5 mm x 5 mm)
Tipo de montagem Surface mount
Integrated Timers Multifunction timer
Integrated Comparators Comparator
Serial Interface - USART USART
Serial Interface - SPI SPI
Serial Interface - I2C I2C
Addressing Space 24-bit linear address space
Shipping Format Tape and reel

Guia de Configuração de Pinos do STM8L101K3U6TR 32-ufqfpn (5 mm x 5 mm)

Configuração de pinos para STM8L101K3U6TR (pacote 32-ufqfpn (5 mm x 5 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.

Diagrama de pinagem do pacote 32-ufqfpn (5 mm x 5 mm) para STM8L101K3U6TR

Nenhum dado detalhado de pinagem disponível para STM8L101K3U6TR.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

STM8L101K3U6TR é adequado para 6 aplicaçãos: Battery-Powered Sensor Nodes, Low-Power Industrial Control Modules, Smart Home Controls, Battery-Powered Remote Controls, Portable Measurement Instruments, Small Appliance Control Boards.

🧩

Battery-Powered Sensor Nodes

The STM8L101K3U6TR fits compact sensor nodes because its low-voltage 1.65 V to 3.6 V operating range complements energy-limited systems. The 16 MHz STM8 core can execute acquisition, filtering and control tasks, while the 8 KB Flash stores application firmware without requiring a larger memory device. I2C and SPI provide practical links to sensors and external converters. Designers should select the device operating mode, peripheral clocking and duty cycle around the battery load rather than treating the maximum CPU frequency as continuous power consumption.

🏭

Low-Power Industrial Control Modules

The STM8L101K3U6TR can serve as the local controller in a small industrial sensing or actuation module. Its multifunction timers support periodic measurement and output generation, while comparators can perform threshold detection on external analog signals. USART, SPI and I2C allow connection to remote sensors, communication transceivers or expansion devices from the same 32-UFQFPN controller. The -40 °C to +85 °C rating supports industrial temperature conditions, but designers must still control board temperature and apply proper grounding and isolation practices.

🏠

Smart Home Controls

The STM8L101K3U6TR is appropriate for compact smart-home endpoints such as environmental controllers, door controls or appliance interfaces. Its 8-bit architecture and 8 KB Flash are well matched to simple state machines, button handling and periodic sensor updates, while I2C supports low-speed peripherals. The device can remain in a low-power state between interactions to conserve energy. Firmware should define wake conditions and debounce timing carefully, because repeated peripheral activity can consume more energy than the processor's idle state alone.

📱

Battery-Powered Remote Controls

The STM8L101K3U6TR can implement a low-energy remote-control transmitter using its compact package and low-voltage operation. The enhanced STM8 core at up to 16 MHz can scan inputs, encode commands and manage low-power sleep intervals, while USART can connect to a radio or communications module. Compared with a larger microcontroller, the 8 KB Flash option emphasizes firmware economy. RF carrier timing, button wake-up behavior and battery leakage should be evaluated together because the MCU may not be the dominant power consumer in the finished transmitter.

🔧

Portable Measurement Instruments

The STM8L101K3U6TR is suitable for compact handheld measurement instruments that combine local sensing, display control and serial data transfer. Its integrated comparators can support threshold and waveform-detection functions, while timers can improve repetitive measurement timing. SPI can connect to higher-speed converters or memory, and I2C is suitable for slower sensors or displays. Because the MCU has only 8 KB of Flash, buffering and complex user-interface code must be sized carefully; external memory or a higher-density family member may be preferable for data-heavy instruments.

⚡

Small Appliance Control Boards

The STM8L101K3U6TR can control compact household or commercial appliances where the required logic includes timing, button input, motor or heater control, and status communication. Its multifunction timers and comparators reduce the need for separate support ICs, and the 32-UFQFPN package limits board footprint. The 1.65 V to 3.6 V operating range requires compatible power regulation and signal levels. Safety-critical loads must use suitable isolation and protection because the MCU itself is not a substitute for independent thermal or overcurrent protection.

What is the STM8L101K3U6TR?
The STM8L101K3U6TR is an STMicroelectronics 8-bit ultra-low-power microcontroller based on the enhanced STM8 CISC core. According to the STM8L101K3 manufacturer product page, it reaches 16 MHz and up to 16 MIPS, includes 8 KB of Flash, and provides timers, comparators, USART, SPI and I2C in a 32-UFQFPN package.
What is the operating voltage of STM8L101K3U6TR?
The STM8L101K3U6TR operates from 1.65 V to 3.6 V. The LCSC product listing identifies this 1.65 V to 3.6 V operating range, while the STMicroelectronics STM8L101K3 family page describes the device as a low-voltage member of the STM8L ultra-low-power family. External interface levels and passive components should be selected for this voltage range.
What is the maximum clock frequency of STM8L101K3U6TR?
The STM8L101K3U6TR supports a maximum clock frequency of 16 MHz. According to the STMicroelectronics STM8L101K3 product page, the enhanced STM8 CPU core can deliver up to 16 MIPS at that clock rate. This provides deterministic control performance while retaining the low-power characteristics required by embedded designs.
How much Flash memory does STM8L101K3U6TR have?
The STM8L101K3U6TR contains 8 KB of Flash memory, organized as 8K x 8. The DigiKey product listing identifies the device as an 8-bit, 16 MHz STM8L EnergyLite microcontroller with 8 KB of Flash. The exact RAM capacity is not stated in the product listing and should be confirmed in the manufacturer datasheet.
Which peripherals are integrated into STM8L101K3U6TR?
The STM8L101K3U6TR integrates multifunction timers, comparators, USART, SPI and I2C. These interfaces are identified in the manufacturer datasheet description and DigiKey listing. They allow the MCU to handle timing, analog comparisons and multiple serial-bus functions without requiring separate interface devices on a compact board.
What package does STM8L101K3U6TR use?
The STM8L101K3U6TR uses a 32-UFQFPN surface-mount package measuring 5 mm by 5 mm. The package includes an exposed pad according to the component description. Use the manufacturer package drawing and land-pattern guidance when assigning PCB pads, and follow the exposed-pad thermal and soldering recommendations.
Where can I download the STM8L101K3U6TR datasheet PDF?
The official STM8L101K3 product page is the appropriate starting point for the STM8L101K3U6TR datasheet and family documentation. Manufacturer-linked PDF copies are also indexed by Octopart and AllDataSheet. Use the STMicroelectronics document for final pin definitions, electrical limits, flash programming procedures and package dimensions.
Where can I find the STM8L101K3U6TR pinout?
The STM8L101K3U6TR pinout is defined in the manufacturer pin-description table and package drawing for the 32-UFQFPN device. The 32-UFQFPN footprint includes an exposed pad, so the PCB layout must distinguish the exposed thermal connection from numbered pins. Use the manufacturer documentation when routing tracks and programming test fixtures.
Where can I buy STM8L101K3U6TR online?
Use the Request a Quote form on this page to request STM8L101K3U6TR availability, current commercial terms and a shipment quotation. The part is listed in active distributor channels as an 8-bit, 16 MHz, 8 KB Flash microcontroller in a 32-UFQFPN package. The quote form provides the appropriate route for a current order.
What is the price of STM8L101K3U6TR?
The current commercial price for STM8L101K3U6TR is handled through the Request a Quote form on this page. This avoids presenting a potentially stale unit or volume figure as a firm quotation. When requesting a quote, identify the required quantity, tape-and-reel packaging, delivery location and any target production schedule.
What is the lead time and stock status for STM8L101K3U6TR?
Current stock and lead-time commitments for STM8L101K3U6TR should be requested through the Request a Quote form on this page. The manufacturer family page and distributor listings show the device as a cataloged STM8L101K3 variant, but a production delivery promise depends on quantity, packaging and scheduling. State the required build horizon with the request.
STM8L101K3U6TR vs STM8L101K3T6TR - which is the drop-in choice?
STM8L101K3T6TR is the closest same-package alternative identified for the STM8L101K3U6TR and may preserve the 32-UFQFPN board footprint. The exact suffix and temperature-grade implications must be checked against the manufacturer ordering information before substitution. A footprint match alone does not replace verification of pin functions, firmware settings and qualification.
Can STM8L101G3U6TR replace STM8L101K3U6TR?
The STM8L101G3U6TR is a same-family STMicroelectronics option associated with the 32-UFQFPN package, but it is not guaranteed to be a direct replacement without checking its pinout and memory organization. Use it when the manufacturer ordering table confirms compatible pins, clocking, peripherals and firmware configuration. A PCB footprint match alone is insufficient.
What is the best drop-in replacement for STM8L101K3U6TR?
STM8L101K3T6TR is the leading same-brand drop-in candidate because it belongs to the same STM8L101K3 family and shares the 32-UFQFPN format used by the target. Before replacing the component, compare the ordering suffixes, pin definitions, temperature range and device identification in the manufacturer documentation. No verified cross-brand pin-identical replacement was identified.
Is STM8L101K3U6TR suitable for battery-operated sensor devices?
The STM8L101K3U6TR is suitable for compact, battery-operated sensor designs that require low-voltage operation and integrated serial interfaces. Its 1.65 V to 3.6 V supply range, 16 MHz STM8 CPU core, USART, SPI and I2C support local sensing, configuration and communication. The final battery life still depends on the selected operating mode, duty cycle and sensor load.

Dados de referência de engenharia para STM8L101K3U6TR — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the STM8L101K3U6TR when a design needs a compact 8-bit controller with 8 KB Flash, operation up to 16 MHz, a 1.65 V to 3.6 V supply range and integrated USART, SPI and I2C in a 32-UFQFPN package. STM8L101K3T6TR is the first option to evaluate when the board must remain unchanged and the required suffix conditions are confirmed. Consider STM8L101G3U6TR when its memory and peripheral allocation meet the application, but verify every pin and device option before using it as a drop-in part. STM8L101G2U6TR is most appropriate when its lower density still satisfies the firmware and peripheral requirements. A cross-brand substitution should be considered only after its exact package, pinout, clock tree, memory map, interrupt vector behavior and peripheral electrical characteristics have been proven equivalent. For battery-powered products, final selection must also be based on measured operating current, wake-up time and standby behavior rather than CPU frequency alone.

Comparação com alternativas

Parâmetro Este produto STM8L101K3T6TR STM8L101G3U6TR STM8L101G2U6TR
Package 32-UFQFPN (5 mm x 5 mm) 32-UFQFPN (5 mm x 5 mm) 32-UFQFPN (5 mm x 5 mm) 32-UFQFPN (5 mm x 5 mm)
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Product Family STM8L101K3 STM8L101K3 STM8L101G3 STM8L101G2

Principais diferenciais

  • Direct same-package family alternative (vs STM8L101K3T6TR)
  • Low-voltage operation in a compact package (vs STM8L101G3U6TR)
  • Integration reduces support-component count (vs STM8L101G2U6TR)

Notas de projeto

Use the manufacturer land pattern for the 32-UFQFPN package and verify pin 1 orientation against the PCB silkscreen. Keep the exposed pad connected to the appropriate ground plane as directed in the package documentation, and place thermal vias within the recommended land pattern. Short power and ground connections help minimize voltage drop during rapid switching of the digital peripherals.

Design the supply network for the documented 1.65 V to 3.6 V operating range, including tolerance, startup behavior and the voltage required by every attached peripheral. Place the required bypass capacitors close to the device supply pins and keep the exposed-pad return path low impedance. Review the internal regulator and external component configuration in the manufacturer reference design when power-gating is used.

Route USART, SPI and I2C signals away from switching nodes and noisy analog inputs. I2C requires suitable pull-up placement, while SPI clock routing should account for slave-device trace length and loading. For low-energy designs, disable unused peripherals and peripheral clocks where permitted to reduce switching activity and improve the effective standby and active-current budget.

Do not assume that another STM8L101 ordering code is interchangeable solely because it uses the same 32-UFQFPN footprint. Check the exact pin table, Flash and RAM density, peripheral allocation, temperature range, option-byte configuration and device identifier. After substitution, retest startup, clock switching, low-power wake-up and every peripheral connected to the affected pins.

Informações de conformidade

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

The manufacturer product page and distributor listings do not state the requested environmental, automotive or material-compliance classifications.

Dados verificados em: 2026-11-15 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

STM8L101K3U6TR datasheet STM8L101K3U6TR pinout STM8L101K3U6TR datasheet pdf STM8L101K3U6TR price STM8L101K3U6TR stock STMicroelectronics STM8L101K3U6TR STM8L101K3U6TR equivalent STM8L101K3U6TR replacement STM8L101K3U6TR footprint STM8L101K3U6TR application circuit STM8L101K3U6TR 16MHz 8KB STM8L101K3U6TR 32 UFQFPN STM8L101K3T6TR vs STM8L101K3U6TR STM8L101G3U6TR vs STM8L101K3U6TR STM8L101K3U6TR low power microcontroller

Componentes & termos relacionados

STMicroelectronics STM8L101K3U6TR STM8L101K3T6TR STM8L101G3U6TR STM8L101G2U6TR STM8L101K3 STM8L EnergyLite STM8 CPU core CISC architecture ultra-low-power microcontroller 8-bit microcontroller 16 MHz 16 MIPS 8 KB Flash 1.65 V to 3.6 V USART SPI I2C multifunction timer comparator 32-UFQFPN QFN package family surface-mount technology battery-powered sensor node industrial control module
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ