STMicroelectronics

STM8S103F3U3TR - 16MHz 8-Bit MCU with 8KB Flash | ST

MPN: STM8S103F3U3TR ✓ Aktif
20-pin UFQFPN, 3 x 3 mm Package 16 MHz Speed 8 KB (8K x 8) Memory
MOQ: 1 |

STM8S103F3U3TR Ringkasan

STMicroelectronics STM8S103F3U3TR is an 8-bit STM8S access-line microcontroller with a 16 MHz CPU, 8 KB of Flash program memory, integrated true data EEPROM, and a 20-pin UFQFPN 3 x 3 mm package. The device also provides a 10-bit ADC, three timers, UART, SPI, and I²C connectivity for compact embedded-control designs.

An access-line microcontroller is an 8-bit MCU category positioned between simple fixed-function controllers and more capable general-purpose processors. It combines a small instruction set, integrated serial interfaces, analog conversion, nonvolatile data storage, and low-cost peripheral integration on one device. This hierarchy—8-bit microcontroller, MCU, embedded controller, and semiconductor—makes the STM8S103F3 family appropriate for cost-sensitive products that need more than simple GPIO control but do not require a high-performance application processor.

The primary advantages of the STM8S103F3U3TR include its 16 MHz maximum clock, 8 KB Flash memory, integrated true data EEPROM, and 10-bit ADC. Three timers support timing and PWM tasks, while UART, SPI, and I²C support communication with sensors, memories, displays, and external controllers. The compact 20-pin UFQFPN package also includes an exposed thermal pad for improved heat spreading in space-constrained assemblies.

The STM8S architecture integrates the processor core, Flash, EEPROM, SRAM, timers, communications peripherals, and analog conversion functions into a single mixed-signal device. Its 10-bit ADC provides a practical resolution for measuring potentiometers, thermistors, dividers, and other slowly changing analog inputs. The three timers can be allocated among base timing, input capture, output compare, PWM generation, or other timing functions according to the product design.

Typical applications include compact industrial control modules, digital thermometers, environmental sensors, LED lighting controllers, appliance interfaces, motor-control auxiliaries, and low-cost serial bridges. The combination of UART, SPI, and I²C allows the MCU to supervise multiple peripheral types without requiring a separate communications controller. Its 8 KB Flash footprint is most appropriate for firmware with focused control logic rather than graphics-intensive or highly connected applications.

Designers should verify the exact pin assignment and exposed-pad connection against the manufacturer datasheet before PCB release. Place decoupling capacitors close to the supply pins, route sensitive analog inputs away from fast-switching nodes, and follow the package land pattern for the 3 x 3 mm UFQFPN footprint. Firmware changes between STM8 variants should also account for differences in peripheral availability and device identifiers.

This page combines the verified STM8S103F3U3TR product characteristics, package information, interfaces, sourcing context, drop-in alternatives, and practical implementation guidance. It helps engineers compare the device by memory, clock, package, ADC capability, and communications interfaces before assigning it to a new embedded-control design.

Pilihan pengganti yang segera untuk STM8S103F3U3TR — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera STM8S103F3U3TR (sama faktor bentuk dan kaki) — berbeza dalam ADC Resolution, Flash Program Memory, Package, Product Line, Product Type.

STMicroelectronics
ADC Resolution: 10 bits
Flash Program Memory: 8 KB
Package: 20-pin UFQFPN
Bandingkan Dengan STM8S103F3U3TR →

STM8S103F3U6ATR

✅ Masuk Drop-In
📦 20-pin UFQFPN, 3 x 3 mm
Ordering suffix changes the temperature grade and reel configuration; core rating remains 16 MHz with 8 KB Flash, 10-bit ADC, 3 timers, UART, SPI, and I²C.

📋 Alternatif rujukan (tidak dalam katalog)

STM8S003F3U6TR

✅ Masuk Drop-In
📦 20-pin UFQFPN, 3 x 3 mm
Related 16 MHz 8-bit MCU with 8 KB Flash but without the STM8S103F3's integrated true data EEPROM; timing-temperature and tape suffix differ.

📋 Alternatif rujukan (tidak dalam katalog)

STM8S103F3U6TR

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
STMicroelectronics
📦 20-pin UFQFPN, 3 x 3 mm
8-bit access-line microcontroller · 16 MHz · 8 KB · 8K x 8 bits · Integrated true data EEPROM · 10 bits · 3 timers · UART, SPI, and I2C

Hubungi untuk harga

Lihat Datasheet →

STM8S103F3U3TR Penilaian maksimum & Ciri-ciri Elektrik

Product Type 8-bit microcontroller
Manufacturer STMicroelectronics
Series STM8S access line
Maximum CPU Frequency 16 MHz
Flash Program Memory 8 KB (8K x 8)
Integrated Data EEPROM Present
ADC Resolution 10 bit
Timer Count 3
Serial Interfaces UART, SPI, I²C
Kemasan 20-pin UFQFPN, 3 x 3 mm
Jenis Pemasangan Surface mount
Product Line STM8S
Memory Architecture 8K x 8 Flash

Panduan Konfigurasi Pin STM8S103F3U3TR 20-pin ufqfpn, 3 x 3 mm

Konfigurasi pin untuk STM8S103F3U3TR (20-pin ufqfpn, 3 x 3 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 20-pin ufqfpn, 3 x 3 mm untuk STM8S103F3U3TR

Tiada data garisan pin yang diperoleh untuk STM8S103F3U3TR.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

STM8S103F3U3TR patut untuk 6 aplikasis: Industrial Sensor and Control Module, Environmental Monitoring Node, LED Lighting Controller, Digital Thermometer and Meter, Appliance Interface and Serial Bridge, Motor Control and PWM Auxiliary.

🏭

Industrial Sensor and Control Module

The STM8S103F3U3TR fits compact industrial sensor modules because its 16 MHz core provides useful timing margin while the 10-bit ADC handles divider-based sensing, thermistors, and basic process inputs. Three timers can support acquisition intervals, input capture, actuator timing, or PWM outputs, while UART, SPI, and I²C provide several paths to connect local sensors and a host controller. Place the MCU in a 20-pin UFQFPN 3 x 3 mm footprint to conserve board area. The main design limit is the 8 KB Flash capacity, so the firmware should focus on local acquisition and control rather than large protocol stacks.

🧩

Environmental Monitoring Node

The STM8S103F3U3TR is appropriate for an environmental monitoring node that combines analog measurements with low-power serial reporting. Its 10-bit ADC can read temperature, humidity, and light sensors implemented as resistive dividers, while I²C supports digital sensors and SPI can connect higher-speed external memory or radio components. UART provides a straightforward host interface for configuration and telemetry. With 8 KB of Flash, the node should use concise firmware and periodic data transmission rather than buffering extensive histories. Firmware must also manage the MCU's sleep and wake behavior to control standby consumption in a battery-powered installation.

💡

LED Lighting Controller

The STM8S103F3U3TR suits small LED lighting and dimming controllers because three timers provide dedicated resources for PWM generation, period timing, and input capture. The 10-bit ADC can monitor a potentiometer, current-sense signal, or button ladder, and UART or I²C can accept configuration commands from a room controller or display module. Its 3 x 3 mm UFQFPN package reduces the footprint of inline LED drivers and compact downlight electronics. The design should use the timers' PWM outputs directly where possible and keep high-current LED drive paths separate from sensitive analog and microcontroller ground returns.

💊

Digital Thermometer and Meter

The STM8S103F3U3TR is a practical control device for a digital thermometer or handheld meter because the 10-bit ADC supports resistive probes and voltage-divider inputs, while integrated EEPROM can preserve calibration or user settings. A display and keypad can be managed through serial peripherals or multiplexed GPIO, and the 16 MHz clock allows responsive sampling and debouncing. The compact 20-pin UFQFPN package helps minimize instrument size. Calibration data should be stored with an integrity scheme, and the analog input network should include suitable filtering to prevent switching noise from the display or keypad drive circuitry from affecting measurements.

🔧

Appliance Interface and Serial Bridge

The STM8S103F3U3TR can act as a compact appliance interface or protocol bridge because it combines UART, SPI, and I²C in one MCU. It can translate commands between an external host, a local EEPROM, a display, and a motor or sensor subsystem while three timers handle periodic status updates and actuator timing. The 8 KB Flash footprint suits bridge firmware with limited local storage, and integrated EEPROM provides a place for configuration values. Firmware should validate incoming frames and handle bus faults explicitly, while the PCB should isolate long external lines from the ADC and clock circuitry.

⚡

Motor Control and PWM Auxiliary

The STM8S103F3U3TR is suitable for a compact motor-control auxiliary or mixed-signal control node where PWM, sequencing, and local sensing are more important than heavy computation. Its three timers can generate PWM, measure input capture events, and establish time bases, while the 10-bit ADC can monitor command or current-sense inputs. UART or I²C allows supervisory control from a main board. The MCU does not itself replace a dedicated gate driver or power stage, so designers should preserve adequate current margin and keep switching-node returns away from analog inputs. Firmware should include defined startup, disabled-state, and fault-response behavior for the actuator.

What is the STM8S103F3U3TR?
The STM8S103F3U3TR is an 8-bit STM8S access-line microcontroller from STMicroelectronics. It operates at up to 16 MHz and provides 8 KB of Flash program memory, integrated true data EEPROM, a 10-bit ADC, three timers, UART, SPI, and I²C in a 20-pin UFQFPN 3 x 3 mm package. According to the manufacturer product page, the STM8S103F2/x3 family combines compact control logic with integrated serial connectivity and analog measurement.
What are the key specifications of STM8S103F3U3TR that engineers should know?
The STM8S103F3U3TR combines a 16 MHz 8-bit CPU, 8 KB of Flash, integrated true data EEPROM, and a 10-bit ADC in a 20-pin UFQFPN package. Its three timers support timing and PWM functions, while UART, SPI, and I²C provide three common serial-interface options. STMicroelectronics describes the STM8S103F2/x3 family as an access-line MCU intended for compact embedded-control products.
Where can I download the STM8S103F3U3TR datasheet PDF?
The official STM8S103F3 documentation is available through the STMicroelectronics product page at https://www.st.com/en/microcontrollers-microprocessors/stm8s103f3.html. The family datasheet covers the STM8S103F2 and STM8S103F3 devices, including the 16 MHz clock, Flash, EEPROM, ADC, timers, UART, SPI, I²C, electrical characteristics, and package information. Use the manufacturer document for design decisions rather than a distributor-hosted copy.
Where can I find the STM8S103F3U3TR pinout?
The STM8S103F3U3TR pinout is documented in the pin-description and package drawings within the manufacturer datasheet for the STM8S103F2/x3 family. The device uses a 20-pin UFQFPN 3 x 3 mm package, and the exposed pad connection must also be followed exactly. Use the manufacturer package drawing when assigning tracks, thermal-pad vias, and test points to avoid connectivity errors.
Is the STM8S103F3U3TR suitable for sensor and IoT control applications?
Yes, the STM8S103F3U3TR is suitable for compact sensor-control and IoT endpoint designs that need more than GPIO control. Its 10-bit ADC can measure resistive or divider-based sensors, and UART, SPI, and I²C permit connection to external sensors, memory, and radios. The 8 KB Flash limit makes it most appropriate for focused control firmware rather than gateway software or large data buffering.
STM8S103F3U3TR vs STM8S003F3U6TR - which is better for a compact control board?
The STM8S103F3U3TR is the better choice when the design needs the STM8S103F3 family's 8 KB Flash and integrated true data EEPROM. The STM8S003F3U6TR is a related 8-bit access-line MCU that may serve cost-focused designs, but its peripheral and memory characteristics must be checked before substitution. According to the manufacturer family description, the STM8S103F2/x3 line explicitly includes true data EEPROM.
What can replace the STM8S103F3U3TR?
The closest identified replacement is STM8S103F3U6ATR, which retains the STM8S103F3 identity, 16 MHz class, 8 KB Flash, integrated EEPROM, and 20-pin UFQFPN footprint while changing the ordering suffix for the alternative temperature and packing configuration. A replacement is only drop-in after checking the temperature grade, reel orientation, exposed-pad implementation, firmware device identifier, and every peripheral used by the design.
Can STM8S003F3U6TR replace STM8S103F3U3TR in an existing design?
STM8S003F3U6TR can be considered as a redesign candidate, but it should not be assumed to be a drop-in replacement for STM8S103F3U3TR. The STM8S003 family lacks the STM8S103F3's 8 KB Flash and integrated true data EEPROM, so code size, persistent-data handling, and device-specific peripheral usage can prevent a direct substitution. Validate the footprint, clock setup, ADC behavior, timer assignments, and boot/debug behavior before releasing a replacement.
When should I choose STM8S103F3U3TR over STM8S003F3U6TR?
Choose STM8S103F3U3TR when the design benefits from 8 KB of Flash and integrated true data EEPROM. Select STM8S003F3U6TR only when its lower-resource architecture satisfies the firmware and data-storage requirements and the board has been validated against its pin and peripheral behavior. The STM8S103F3U3TR also offers a clear functional path for applications using UART, SPI, I²C, multiple timers, and the 10-bit ADC.
Is STM8S103F3U3TR suitable for industrial control and automation equipment?
Yes, the STM8S103F3U3TR can serve as the compact control MCU in industrial modules, provided its electrical limits and environmental qualifications match the installation. The device integrates a 10-bit ADC, three timers, UART, SPI, and I²C, covering common sensing, actuator-control, and communications needs. The compact 3 x 3 mm UFQFPN package also suits densely populated control boards.
Where can I buy STM8S103F3U3TR online?
Use the Request a Quote form on this page to request STM8S103F3U3TR availability, lead time, and an order quote for the exact 20-pin UFQFPN ordering configuration. The part is identified by STMicroelectronics as an STM8S103F3 8-bit, 16 MHz MCU with 8 KB Flash and integrated EEPROM. Confirm that the quoted suffix and tape-and-reel configuration match the device already approved in your design.
What is the price of STM8S103F3U3TR?
Use the Request a Quote form on this page for current STM8S103F3U3TR pricing and quantity availability. Pricing depends on order quantity, sourcing channel, and the exact STMicroelectronics ordering suffix. The request should specify the 20-pin UFQFPN package, STM8S103F3U3TR MPN, and required reel configuration so the supplier can quote the correct assembly.
What is the lead time and stock status for STM8S103F3U3TR?
Current stock and lead time for STM8S103F3U3TR should be requested through the Request a Quote form on this page. The manufacturer lists the STM8S103F3 family as an active product line, while production planning depends on the ordered quantity and package configuration. State the required delivery schedule and reel quantity when requesting the quotation.
Does STM8S103F3U3TR support the communication interfaces needed for a sensor hub?
Yes, the STM8S103F3U3TR includes UART, SPI, and I²C interfaces, allowing one MCU to connect multiple kinds of peripherals. I²C suits common sensors and EEPROM devices, SPI supports higher-throughput flash and display components, and UART handles simple host or module communication. The 10-bit ADC handles local analog inputs, but software buffering remains important if the application also handles substantial network data.
Is STM8S103F3U3TR the same as STM8S103F3U6ATR?
No, the STM8S103F3U3TR and STM8S103F3U6ATR are related STM8S103F3 devices rather than literally identical order codes. Both are associated with the 16 MHz, 8 KB Flash, integrated-Ethernet? no integrated-Ethernet is not a feature of this MCU; the relevant common features are the 10-bit ADC, three timers, UART, SPI, and I²C. Confirm temperature grade, reel orientation, and exact manufacturer ordering details before treating one as a drop-in replacement.

Data referensi kejuruteraan untuk STM8S103F3U3TR — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the STM8S103F3U3TR for compact designs that require a 16 MHz 8-bit MCU, 8 KB of Flash, integrated true data EEPROM, a 10-bit ADC, three timers, and UART, SPI, and I²C in a 3 x 3 mm UFQFPN package. STM8S103F3U6ATR is the closest identified drop-in candidate when its temperature grade, reel orientation, and ordering configuration are acceptable. STM8S103F3U6TR offers the same core function under another suffix and should be selected only after confirming the environmental and packing requirements. STM8S003F3U6TR is the lower-resource option and is appropriate when true data EEPROM is unnecessary. Before releasing any substitute, validate firmware size, EEPROM use, ADC behavior, timer channels, pin multiplexing, boot options, and exposed-pad layout.

Perbandingan dengan Gantian

Parametr Produk Ini STM8S103F3U6ATR STM8S003F3U6TR STM8S103F3U6TR
Package 20-pin UFQFPN, 3 x 3 mm 20-pin UFQFPN, 3 x 3 mm 20-pin UFQFPN, 3 x 3 mm 20-pin UFQFPN, 3 x 3 mm
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
CPU Architecture 8-bit STM8 8-bit STM8 8-bit STM8 8-bit STM8
Maximum CPU Frequency 16 MHz 16 MHz 16 MHz 16 MHz
Flash Program Memory 8 KB 8 KB 8 KB 8 KB
Integrated True Data EEPROM Present Present Absent Present
ADC Resolution 10 bit 10 bit 10 bit 10 bit
Timer Count 3 3 3 3
Serial Interfaces UART, SPI, I²C UART, SPI, I²C UART, SPI, I²C UART, SPI, I²C
Ordering Suffix U3TR U6ATR U6TR U6TR

Penyeberangsung Jelas

  • Integrated true data EEPROM (vsSTM8S003F3U6TR)
  • Same 20-pin compact footprint (vsSTM8S103F3U6ATR)
  • Broad serial-interface integration (vsSTM8S003F3U6TR)
  • Three integrated timers for embedded control (vsSTM8S103F3U6ATR)

Catatan Desain

Use the 20-pin UFQFPN 3 x 3 mm land pattern and follow the manufacturer package drawing for exposed-pad dimensions and copper. Place input and output decoupling capacitors immediately adjacent to their associated supply pins, and provide thermal-pad vias according to the recommended pattern. Confirm the pin-1 orientation and exposed-pad net on the final footprint because an incorrect orientation can connect power or communications signals to the wrong pads.

Route the 10-bit ADC inputs away from PWM outputs, clock edges, and high-current switching returns. Use a quiet analog ground region where appropriate, connect analog ground to the main ground at a controlled point, and keep the sensor input network close to the MCU. Filtering capacitors can reduce sampled noise, but their values and source impedance should be checked against the acquisition time required by the selected ADC channel.

Do not treat related STM8 suffixes as automatically interchangeable. Before replacing STM8S103F3U3TR, compare temperature grade, tape orientation, Flash size, true data EEPROM availability, peripheral assignments, device identifiers, option bytes, boot behavior, and pin multiplexing. In particular, a design that stores calibration or configuration in the STM8S103F3's integrated EEPROM requires code and migration planning before moving to an MCU without that feature.

Follow the manufacturer guidance for supply voltage, decoupling, and startup behavior. Keep the MCU's analog and digital return paths organized so current from the 10-bit ADC or serial interfaces does not share a narrow path with external actuator currents. If the module also drives relays, solenoids, or motors, use separate return routing and protection so transients are not injected into the MCU's supply pins.

The 8 KB Flash capacity is the principal firmware constraint for this part. Plan the code-size budget during component selection, include the bootloader and interrupt handlers, and avoid adding large libraries after the PCB layout is frozen. Use the integrated EEPROM for small persistent parameters rather than reserving additional Flash for simple configuration data, and implement wear-aware update procedures for frequently changed values.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

Compliance status was not established for the exact ordering configuration. Use the STM8S103F2/x3 manufacturer product page and current manufacturer declarations for production qualification.

Pencarian Berhubungan

STM8S103F3U3TR datasheet STM8S103F3U3TR datasheet pdf STM8S103F3U3TR pinout STM8S103F3U3TR specifications STM8S103F3U3TR price STM8S103F3U3TR stock STM8S103F3U3TR equivalent STM8S103F3U3TR replacement STM8S103F3U3TR cross reference STM8S103F3U3TR vs STM8S003F3U6TR STM8S103F3 20 pin UFQFPN STM8S103F3 16MHz 8KB Flash STM8S103F3U3TR sensor controller STMicroelectronics STM8S103F3U3TR

Komponen dan Tanda berkaitan

STMicroelectronics STM8S103F3U3TR STM8S103F3U6ATR STM8S003F3U6TR STM8S103F3U6TR STM8S STM8S103F2/x3 8-bit microcontroller MCU embedded controller semiconductor Access line 16 MHz 8 KB Flash true data EEPROM 10-bit ADC UART SPI I²C 3 timers 20-pin UFQFPN QFN family surface mount industrial control environmental monitoring
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ