STMicroelectronics

STM8S103F3U6TR - 16MHz 8KB Flash 8-Bit MCU | STMicroelectronics

MPN: STM8S103F3U6TR ✓ Aktif
2.95 V to 5.5 V Vdss 20-pin UFQFPN Package 16 MHz Speed 8 KB Memory
MOQ: 1 |

STM8S103F3U6TR Ringkasan

The STMicroelectronics STM8S103F3U6TR is an 8-bit STM8S-series access-line microcontroller operating at up to 16 MHz, with 8 KB of Flash program memory and integrated true data EEPROM in a 20-pin UFQFPN package. It combines a 10-bit ADC, three timers, UART, SPI, and I2C interfaces in a compact controller intended for cost-sensitive embedded systems.

A microcontroller is a programmable semiconductor that integrates a CPU, program memory, data memory, and peripherals on one device. The STM8 belongs to the STM8 access-line family within the broader hierarchy of embedded processors, embedded controllers, and semiconductor devices. By placing the core, analog conversion, serial communications, timers, and EEPROM into one package, it reduces the component count and board area required for compact control products.

The STM8S103F3U6TR provides 16 MHz maximum clock speed, 8 KB of Flash, and integrated true data EEPROM. Its 10-bit ADC supports analog sensing, while three timers support timing, input capture, output compare, and PWM-related functions. UART, SPI, and I2C interfaces allow the device to connect with sensors, memories, human-interface devices, actuators, and other embedded controllers. The operating supply range is 2.95 V to 5.5 V.

The STM8S architecture is designed for straightforward 8-bit embedded control. Its combination of EEPROM, ADC, timers, and serial interfaces allows a compact design to acquire measurements, retain calibration or configuration data, execute control algorithms, and communicate with external equipment without requiring separate data-memory ICs. The 16 MHz clock rate provides additional processing margin for protocol handling and control tasks.

Typical uses include compact appliance controllers, industrial sensing modules, keypad interfaces, motor-control peripherals, LED-control systems, and communication nodes. The MCU is particularly appropriate when designers need a conventional set of mixed-signal and serial peripherals in a small package rather than a high-performance Cortex-M processor with a large pin count.

PCB design should follow the manufacturer pinout and layout guidance exactly, especially for decoupling, oscillator routing, analog grounding, and exposed-pad thermal management. Confirm the programmed output configuration, reset behavior, unused-pin treatment, and input tolerances before production release. This page combines device specifications, sourcing guidance, interface details, and drop-in-replacement considerations into a focused engineering reference.

Pilihan pengganti yang segera untuk STM8S103F3U6TR — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera STM8S103F3U6TR (sama faktor bentuk dan kaki) — berbeza dalam ADC Resolution, Flash Program Memory, Package, Product Line, Product Type.

STMicroelectronics
ADC Resolution: 10 bit
Flash Program Memory: 8 KB (8K x 8)
Package: 20-pin UFQFPN, 3 x 3 mm
Bandingkan Dengan STM8S103F3U6TR →

Tiada pilihan pengganti yang segera untuk produk ini.

Minta Alternatif

STM8S103F3U6TR Penilaian maksimum & Ciri-ciri Elektrik

Product Type 8-bit access-line microcontroller
Maximum Clock Speed 16 MHz
Flash Program Memory 8 KB
Flash Organization 8K x 8 bits
Data EEPROM Integrated true data EEPROM
ADC Resolution 10 bits
Timer Count 3 timers
Serial Interfaces UART, SPI, and I2C
Supply Voltage Range 2.95 V to 5.5 V
I/O Port Count 16 I/O ports
Kemasan 20-pin UFQFPN
Jenis Pemasangan Surface mount
Architecture 8-bit STM8
Product Line STM8S103F3 access line
Lifecycle Stage Active
Program Memory Type Flash

Panduan Konfigurasi Pin STM8S103F3U6TR 20-pin ufqfpn

Konfigurasi pin untuk STM8S103F3U6TR (20-pin ufqfpn pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 20-pin ufqfpn untuk STM8S103F3U6TR

Tiada data garisan pin yang diperoleh untuk STM8S103F3U6TR.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

STM8S103F3U6TR patut untuk 6 aplikasis: Compact Appliance Control, Industrial Sensing Module, Motor and Actuator Interface, LED Lighting Controller, Communication and Protocol Bridge, Battery-Powered Embedded Sensor.

⚡

Compact Appliance Control

The STM8S103F3U6TR fits compact appliance controllers that need direct sensing, timed outputs, and serial communication without a high-performance processor. Its 16 MHz 8-bit core provides execution margin for state machines, debouncing, and actuator sequencing, while the 10-bit ADC can read temperature, level, or switch-position signals. The three timers support periodic control and PWM-related functions, and UART, SPI, or I2C can connect a display, sensor, or external driver. Integrated true data EEPROM preserves configuration or calibration values across power cycles, reducing the need for a separate memory component. The 20-pin UFQFPN also limits board area, but the design must follow the manufacturer land pattern and exposed-pad requirements.

🏭

Industrial Sensing Module

The STM8S103F3U6TR is suitable for an industrial sensing module combining an analog front end with local processing and short-range communication. Its 10-bit ADC can digitize suitable sensor outputs within its specified analog limits, while the 16 MHz core handles filtering, calibration, threshold evaluation, and fault reporting. UART or I2C can connect the module to a controller, and SPI can support a higher-speed sensor or external memory when required. The 2.95 V to 5.5 V supply range supports 5 V industrial subsystems, although the exact regulator, isolation, transient protection, and environmental requirements remain application-specific. Integrated EEPROM is useful for storing calibration coefficients or sensor configuration.

⚡

Motor and Actuator Interface

The STM8S103F3U6TR can serve as the control MCU in a small motor-driver or actuator-interface module. Its three timers provide the timing resources needed for edge-aligned or center-aligned PWM generation, input capture, and periodic control, allowing an external MOSFET driver or H-bridge to receive deterministic control signals. The 10-bit ADC can monitor a current, position, or supply signal when the analog front end is designed appropriately, while UART provides a service or diagnostics interface. The MCU does not replace the power stage, so designers must still select the driver, perform current limiting, and validate stall and overvoltage behavior. The compact UFQFPN package helps reduce controller-board area.

💡

LED Lighting Controller

The STM8S103F3U6TR is appropriate for compact LED-control modules where accurate timing, local storage, and a low component count matter. Timer outputs can generate PWM dimming signals, while the 10-bit ADC can monitor a current-sense or supply-feedback signal after suitable signal conditioning. Integrated EEPROM allows lighting scenes, calibration values, or addressing information to survive power cycles. SPI can connect to an LED driver or serial LED device, and UART can provide commissioning or system-level control. The 16 MHz operating speed supports responsive user-interface updates and fault handling. Thermal performance of the LEDs and any external driver must be evaluated separately because MCU package dissipation does not represent the lighting system's thermal burden.

🌐

Communication and Protocol Bridge

The STM8S103F3U6TR can implement a compact protocol-conversion or connectivity-helper module when the design requires multiple serial interfaces. UART can connect to a host computer or field device, SPI can interface with a radio or storage device, and I2C can connect to sensors or configuration peripherals. The 8 KB Flash budget must be allocated carefully because bridging and protocol-conversion code can grow quickly, while the integrated EEPROM is useful for addresses, calibration, or persistent configuration. A 16 MHz 8-bit core is appropriate for modest protocol loads rather than high-throughput wireless processing. Production validation should include timing margins, bus fault recovery, bootloader behavior, and peripheral errata review.

🧩

Battery-Powered Embedded Sensor

The STM8S103F3U6TR can support a compact battery-powered sensing product where an 8-bit controller, EEPROM, ADC, and serial interfaces are sufficient. The device can measure an analog sensor, apply calibration stored in EEPROM, report readings through UART or I2C, and use timer interrupts for scheduled sampling or low-power wake-up. Its 2.95 V minimum operating voltage is relevant when designing a regulator or energy-harvesting front end. The low-power behavior, sleep currents, and analog accuracy must be verified in the system rather than inferred from the general feature list. Battery life depends heavily on sensor duty cycle, regulator quiescent current, and communication activity, none of which should be treated as fixed MCU specifications without the relevant datasheet values.

What are the key specifications of STM8S103F3U6TR that engineers should know?
The STM8S103F3U6TR is a 16 MHz, 8-bit access-line microcontroller with 8 KB of Flash, integrated true data EEPROM, a 10-bit ADC, three timers, and UART, SPI, and I2C interfaces in a 20-pin UFQFPN package. According to the STMicroelectronics STM8S103F3 product page, the device belongs to the STM8S103F2/x3 access line. Its 2.95 V to 5.5 V operating range makes it suitable for compact embedded-control systems, while EEPROM allows nonvolatile parameter storage without a separate memory component.
Where can I download the STM8S103F3U6TR datasheet PDF?
The official STM8S103F3U6TR technical documentation begins on STMicroelectronics' STM8S103F3 product page at https://www.st.com/en/microcontrollers-microprocessors/stm8s103f3.html. Use the product page to access the manufacturer datasheet, reference manual, and device documentation for the STM8S103F2/x3 family. The ordering code STM8S103F3U6TR identifies the 8 KB Flash, UFQFPN-20, industrial-temperature device variant, so confirm the relevant ordering-information table when matching a document to the exact suffix.
Where can I find the STM8S103F3U6TR pinout?
The STM8S103F3U6TR pinout is documented in the manufacturer's STM8S103F2/x3 datasheet and package information on the official STMicroelectronics product page. The device uses a 20-pin UFQFPN package with 16 I/O ports. Use the manufacturer pin-description table when assigning tracks because alternate-function roles and unused-pin requirements must follow the exact datasheet. The package drawing also determines the exposed-pad treatment and recommended land pattern for the PCB footprint.
What is the STM8S103F3U6TR operating voltage range?
The STM8S103F3U6TR operates from 2.95 V to 5.5 V. This range is identified in the STM8S103F3U6TR specifications and is consistent with the STM8S103F2/x3 access-line family's 5 V-oriented embedded-control positioning. When designing the power circuit, account for startup and operating tolerances, ensure every connected I/O remains within its permitted voltage limits, and place the decoupling network close to the device according to the manufacturer's layout guidance.
How much Flash memory does STM8S103F3U6TR have?
The STM8S103F3U6TR contains 8 KB of Flash program memory organized as 8K x 8 bits. STMicroelectronics describes the STM8S103F3 device as an access-line 8-bit MCU with integrated true data EEPROM. The program Flash stores firmware, while the EEPROM can retain configuration or calibration information. Firmware sizing should also account for the bootloader, vector table, interrupt handlers, linker allocation, and any application libraries placed into program memory.
What peripherals does the STM8S103F3U6TR include?
The STM8S103F3U6TR includes a 10-bit ADC, three timers, UART, SPI, and I2C interfaces. These peripherals support analog measurement, periodic timing, PWM-related control, and serial communication with sensors, memories, displays, and other controllers. The product-family description identifies these functions for the STM8S103F2/x3 access line. Exact pin multiplexing, timer channels, and peripheral operating modes must be assigned from the manufacturer datasheet and reference manual for the selected package.
Is STM8S103F3U6TR suitable for a low-voltage embedded-control design?
The STM8S103F3U6TR is suitable for 5 V-class embedded-control designs because its specified operating range is 2.95 V to 5.5 V. At 16 MHz it provides more processing margin than many simple 8-bit control tasks require, while its ADC, timers, EEPROM, UART, SPI, and I2C peripherals reduce the need for external components. Verify regulator startup, I/O levels, clock setup, and analog-reference requirements in the complete design.
STM8S103F3U6TR vs STM8S103F3P3TR — which package fits an existing PCB?
STM8S103F3U6TR is ordered in a 20-pin UFQFPN package, while STM8S103F3P3TR is associated with a different package ordering variant and cannot be assumed to fit the same land pattern. A replacement is only drop-in when its package dimensions, pad layout, pin numbering, and electrical functions match. Compare the manufacturer package drawings and pin tables directly; do not substitute solely because both devices use the STM8S103F3 base product family.
STM8S103F3U6TR vs STM8S103F3M6TR — is M6TR a direct replacement?
STM8S103F3M6TR is not automatically a drop-in replacement for STM8S103F3U6TR because the ordering suffix denotes a different package option. Although both belong to the STM8S103F3 family, PCB compatibility depends on matching UFQFPN-20 land geometry, exposed-pad construction, pin numbering, and signal assignments. Treat M6TR as a redesign candidate unless its package drawing is proven identical to the U6TR footprint and its temperature and qualification requirements meet the application.
When should I choose STM8S103F3U6TR over another STM8 controller?
Choose STM8S103F3U6TR when a design needs an 8-bit controller with 16 MHz operation, 8 KB Flash, integrated EEPROM, a 10-bit ADC, three timers, and UART, SPI, and I2C in a compact 20-pin surface-mount package. It is a strong fit for conventional embedded control rather than high-performance connectivity. Choose a larger-memory or more highly integrated MCU when firmware growth, USB, CAN, high-resolution ADC accuracy, or extensive connectivity requirements exceed the STM8S103F3 feature set.
What is the best drop-in replacement for STM8S103F3U6TR?
No confirmed drop-in replacement for STM8S103F3U6TR is established because the available cross-reference results do not identify a pin-compatible 20-pin UFQFPN device with matching electrical functions. A valid replacement must match the footprint, pinout, supply range, memory organization, EEPROM behavior, ADC, timers, and communication peripherals, and it must also pass firmware and timing validation. Use the Request a Quote form for sourcing support while the original STMicroelectronics part is the controlled baseline.
What can replace STM8S103F3U6TR without redesigning the PCB?
A PCB-compatible replacement for STM8S103F3U6TR must be an exact or qualified pin-to-pin match for its 20-pin UFQFPN footprint. Generic search tools and family members with different ordering suffixes do not establish drop-in compatibility. The only defensible procedure is to compare the candidate's package drawing, complete pin table, electrical limits, clock behavior, peripherals, memory map, and errata, then perform firmware and hardware regression testing. No such confirmed replacement is identified here.
Where can I buy STM8S103F3U6TR online?
Use the Request a Quote form on this XAIPART product page to request STM8S103F3U6TR availability, current lead time, and order quantities. The exact ordering code is important because package and temperature suffixes define different STM8S103F3 variants. The manufacturer product page is the appropriate reference for lifecycle and configuration confirmation, while formal purchasing should use the exact full MPN shown in the product listing.
What is the price of STM8S103F3U6TR?
Current STM8S103F3U6TR pricing is best obtained through the Request a Quote form on this page because commercial pricing changes with quantity, inventory, and order conditions. The structured pricing section records the latest directly printed unit-price reference for the exact MPN without treating it as a guaranteed quotation. Submit the required quantity, delivery location, and target date with your request to obtain a current, order-specific response.
What is the lead time and stock status for STM8S103F3U6TR?
The STM8S103F3U6TR is listed as active, but current stock and delivery timing should be confirmed through the Request a Quote form on this page. The exact MPN, requested quantity, and delivery destination are needed for an order-specific response. Do not interpret an active lifecycle designation as a guarantee of immediate inventory; production planning should use the confirmed allocation and lead time returned with the quotation.
Is STM8S103F3U6TR RoHS compliant and qualified for automotive use?
The RoHS, REACH, AEC-Q100, lead-free, and halogen-free classifications for STM8S103F3U6TR are not established by the technical summary, so this page marks them as unknown rather than making an assumption. The industrial-temperature ordering suffix alone does not constitute AEC-Q100 qualification. Before deployment, request the manufacturer declaration, material compliance report, and product qualification documentation for the exact ordering code and verify whether your application requires automotive qualification.

Data referensi kejuruteraan untuk STM8S103F3U6TR — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose STM8S103F3U6TR for compact embedded-control products that need an 8-bit MCU operating at 16 MHz with 8 KB Flash, integrated EEPROM, a 10-bit ADC, three timers, and UART, SPI, and I2C. It is especially useful when a 20-pin UFQFPN footprint, a 2.95 V to 5.5 V supply, and a moderate firmware footprint meet the system requirements. The integrated EEPROM and ADC can reduce external component count in sensing and appliance-control products. Choose a different STM8S103F3 ordering code only after verifying its package footprint and temperature details. Do not use the smaller-memory STM8S103F2 devices as drop-in options unless firmware and compatibility analysis proves the memory reduction acceptable. For high-speed connectivity, larger firmware, USB, CAN, or more advanced analog performance, select a higher-end MCU family rather than forcing this access-line device beyond its intended role.

Perbandingan dengan Gantian

Parametr Produk Ini
Package 20-pin UFQFPN
Brand STMicroelectronics
Architecture 8-bit STM8
Maximum Clock Speed 16 MHz
Flash Program Memory 8 KB
Data Memory Integrated true data EEPROM
ADC Resolution 10 bits
Timer Count 3 timers
Serial Interfaces UART, SPI, and I2C
Supply Voltage Range 2.95 V to 5.5 V
I/O Port Count 16 I/O ports
Lifecycle Stage Active

Penyeberangsung Jelas

  • Compact integration of memory, conversion, timing, and serial interfaces (vsDiscrete 8-bit MCU designs using separate EEPROM and ADC devices)
  • 16 MHz clock provides control headroom for mixed embedded tasks (vsLower-clock 8-bit microcontroller implementations)
  • Single 2.95 V to 5.5 V supply range supports compact 5 V systems (vsControllers requiring narrower supply ranges)
  • 16 general-purpose I/O ports in a compact surface-mount package (vsLarger-package microcontrollers with fewer usable I/O pins)

Catatan Desain

Implement the 20-pin UFQFPN footprint directly from the STM8S103F2/x3 manufacturer package drawing, including the exposed-pad geometry, pad dimensions, and paste pattern. Place the main decoupling capacitor close to the corresponding supply and ground pins, and provide additional local bypass capacitance where multiple supply pins are present. Confirm the land pattern against the IPC-compatible fabrication capability of the PCB supplier rather than scaling a generic QFN drawing.

Design the supply path for a 2.95 V to 5.5 V operating range and account for startup voltage, regulator tolerance, transient response, and the actual peripheral load. Use the manufacturer pin-description table to distinguish supply pins from I/O pins before applying external voltage. Do not assume that a 5 V signal is safe on every I/O when the system operates near the lower supply limit; verify input and injected-current limits in the datasheet.

Keep analog-sensing routes short and separated from fast-switching or high-current paths. For accurate ADC results, use a quiet ground reference, minimize shared copper impedance between the sensor return and MCU ground, and place analog input filtering close to the source when possible. If an external clock or sensitive communication lines are used, route them away from the switching stage and follow the reference-manual layout recommendations.

Do not substitute another STM8S103F3 package suffix solely because the base family name matches. The U6TR ordering code identifies a 20-pin UFQFPN configuration, while other package orderings can require a different footprint, pad arrangement, or pin assignment. Verify the exact package drawing, complete pin table, temperature grade, and qualification requirements before treating any alternative as a drop-in replacement.

Establish the clock and reset implementation exactly as described in the manufacturer reference manual. Confirm startup behavior, reset release timing, external-clock limits, and debug or programming access before final routing. For UART, SPI, and I2C, use the recommended pull-up arrangements where required, keep rise and fall times within the connected devices' specifications, and include signal conditioning when cable lengths or slow peripheral drivers could create timing or ringing problems.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The technical summary confirms active lifecycle status but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals classifications. Obtain compliance declarations for the exact ordering code from STMicroelectronics.

Data disahkan pada: 2026-11-15 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

STM8S103F3U6TR datasheet STM8S103F3U6TR pinout STM8S103F3U6TR datasheet pdf STM8S103F3U6TR specifications STM8S103F3U6TR equivalent STM8S103F3U6TR replacement STM8S103F3U6TR footprint STM8S103F3U6TR price STM8S103F3U6TR stock STMicroelectronics STM8S103F3U6TR STM8S103F3 UFQFPN-20 pinout STM8S103F3 application circuit

Komponen dan Tanda berkaitan

STMicroelectronics STM8S103F3U6TR STM8S103F3 STM8S103F2/x3 STM8 8-bit microcontroller embedded controller semiconductor 16 MHz 8 KB Flash true data EEPROM 10-bit ADC UART SPI I2C 20-pin UFQFPN QFN package family surface mount SMD 2.95 V to 5.5 V 16 I/O ports industrial control appliance controller sensor module
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ