STM8S903F3U3TR - 8-Bit 16MHz MCU, 8KB Flash | STMicroelectronics
MPN: STM8S903F3U3TR ✓ AktifSTM8S903F3U3TR Ringkasan
An 8-bit microcontroller is a compact embedded-control component used to execute firmware, monitor inputs, and control outputs. The STM8S family belongs to the broader microcontroller and embedded-processing hierarchy, combining a CPU core, nonvolatile program memory, data memory, communications peripherals, and analog conversion functions in one package. The STM8S903 access line is aimed at small controllers that need useful connectivity and analog features without a higher-cost 32-bit architecture.
The principal advantages of the STM8S903F3U3TR include its 16 MHz operating clock, 8 KB Flash capacity, 1 KB RAM, 640-byte EEPROM, 16 available I/O positions, and 2.95 V to 5.5 V supply range. These characteristics support compact control products that must combine serial communications, timed outputs, and analog measurement. Its RoHS-compliant construction also makes it suitable for designs managed under modern environmental material requirements.
The device integrates separate communication and timing resources rather than relying entirely on external components. Two timers support periodic and timing-intensive control functions, while UART, SPI, and I²C interfaces allow connection to sensors, displays, memory devices, transceivers, and other embedded peripherals. The 10-bit ADC provides a practical interface for analog sensor inputs. Because this is an 8-bit architecture, firmware, interrupt handling, and signal-processing requirements should be evaluated against the limited arithmetic width of the STM8 core.
Typical uses include compact motor controllers, appliance control panels, small sensor nodes, communications modules, industrial accessories, and low-cost embedded instruments. Its 20-pin UFQFPN format supports dense PCB layouts, while the exposed thermal pad provides a direct connection path for heat dissipation. Applications that require extensive protocol handling, large data storage, high-resolution conversion, or complex graphics should consider a more capable microcontroller family.
PCB implementation requires careful decoupling and exposed-pad layout. Place the supply bypass capacitor close to the device power pins, route sensitive analog inputs away from fast-switching nodes, and use continuous ground-plane construction. Connect the exposed pad to the appropriate ground and thermal copper area using the manufacturer’s footprint and land-pattern guidance. Confirm all peripheral pin assignments against the pin-description table before final routing.
This product page combines the verified device characteristics with package-level implementation guidance, lifecycle information, sourcing instructions, and a conservative evaluation of drop-in replacement options. It is intended to help engineers confirm electrical fit, interface availability, PCB compatibility, and application suitability before committing the STM8S903F3U3TR to a new design.
Pilihan pengganti yang segera untuk STM8S903F3U3TR — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera STM8S903F3U3TR (sama faktor bentuk dan kaki) — berbeza dalam Package, ADC Resolution, Flash Program Memory, RAM, Package Dimensions.
Tiada pilihan pengganti yang segera untuk produk ini.
Minta AlternatifSTM8S903F3U3TR Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 8-bit microcontroller |
| Series | STM8S |
| Core Architecture | STM8 CISC |
| Maximum Clock Speed | 16 MHz |
| Flash Program Memory | 8 KB (8K x 8) |
| RAM | 1 KB |
| EEPROM | 640 bytes |
| Supply Voltage Range | 2.95 V to 5.5 V |
| ADC Resolution | 10-bit |
| Number of I/O Ports | 16 |
| Timer Count | 2 timers |
| Serial Interfaces | UART, SPI, and I²C |
| Additional Connectivity | IrDA and LIN bus |
| Kemasan | 20-pin UFQFPN with exposed pad |
| Package Dimensions | 3 mm x 3 mm |
| Package Pitch | 0.65 mm |
| Jenis Pemasangan | Surface mount |
| Shipping Format | Tape and reel |
| RoHS Compliance | Compliant |
Panduan Konfigurasi Pin STM8S903F3U3TR 0.65 mm
Konfigurasi pin untuk STM8S903F3U3TR (0.65 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk STM8S903F3U3TR.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
STM8S903F3U3TR patut untuk 6 aplikasis: Compact Motor Control, Industrial Sensor Node, Appliance Control Panel, UART Communication Module, Low-Cost Data Acquisition Board, Embedded Accessory Controller.
Compact Motor Control
The STM8S903F3U3TR is suitable for compact motor-control modules because its two timers, PWM capability, and 16 I/O ports provide the basic resources needed for command decoding, speed references, and actuator outputs. The 10-bit ADC can monitor a current or position-related analog signal, while UART, SPI, or I²C can connect to a host, sensor, or driver stage. Operating from 2.95 V to 5.5 V supports common industrial and appliance rails. Designers should calculate switching losses in the external driver separately, because the MCU itself controls the system rather than carrying motor current directly. Firmware must also account for the 8-bit architecture and 1 KB RAM when coordinating timing-critical routines.
Disebarkan
Industrial Sensor Node
The STM8S903F3U3TR fits small industrial sensor nodes that combine analog measurement with short-range serial communications. Its 10-bit ADC can acquire a conditioned sensor signal, while the 16 available I/O positions handle alarm, status, and digital-input functions. The 640-byte EEPROM preserves calibration or configuration values, and the 8 KB Flash capacity supports a focused acquisition and communications firmware image. I²C is appropriate for small sensors, SPI for faster peripherals, and UART for a local service connection. The 2.95 V minimum supply supports industrial rails with suitable regulation. Deployment should include brown-out, watchdog, and power-on reset functions to improve behavior during supply disturbances and long-duration unattended operation.
Disebarkan
Appliance Control Panel
The STM8S903F3U3TR can serve as the controller in an appliance panel containing buttons, indicators, a display interface, and several electromechanical outputs. Its 16 I/O ports cover typical user-interface and discrete-control requirements, while the timers support blinking, debouncing, scanning, and periodic maintenance tasks. UART, SPI, and I²C provide options for a display controller, external storage, or a communication transceiver. The 16 MHz clock is suitable for responsive menu and status logic, and the 8 KB Flash and 1 KB RAM fit a compact embedded user interface. The 2.95 V to 5.5 V range permits integration with either 3.3 V or 5 V subsystems. Firmware should include brown-out and watchdog reset handling for reliable operation around mains-derived power systems.
Disebarkan
UART Communication Module
The STM8S903F3U3TR is appropriate for a small protocol-conversion or service module built around UART connectivity. The controller can frame messages, manage local commands, update status indicators, and bridge data to an SPI or I²C peripheral. Its 16 MHz operating speed and 8 KB Flash provide room for a focused protocol stack, while the 640-byte EEPROM can hold configuration parameters such as addresses or calibration settings. The 10-bit ADC adds an optional monitoring channel for supply or signal-health checks without another mixed-signal device. A 20-pin UFQFPN helps keep the module compact, although the exposed pad must be tied to ground and thermally connected according to the manufacturer land pattern. Firmware and bootloader requirements should be frozen before production because pin-compatible alternatives are not established.
Disebarkan
Low-Cost Data Acquisition Board
The STM8S903F3U3TR can form the center of a compact data-acquisition device when the measured signal does not require more than 10-bit resolution. The ADC, 16 I/O lines, and two timers support periodic sampling, trigger handling, and digital status capture. Flash stores firmware and small lookup tables, RAM supports working buffers, and EEPROM retains configuration across power cycles. SPI is useful for a higher-speed ADC or external storage device, while UART can export collected records to a host. The 2.95 V to 5.5 V operating range enables use with both common logic rails. For analog accuracy, separate sensitive sensor paths from digital and switching nodes, provide local reference and input conditioning, and calibrate the implemented system rather than assuming ideal converter behavior.
Disebarkan
Embedded Accessory Controller
The STM8S903F3U3TR fits small accessories that need local control, serial communication, and a few analog or digital inputs. Examples include environmental monitors, actuator interfaces, cable controls, and programmable indicator blocks. The 10-bit ADC can sample a light, temperature-derived, or resistive sensor signal; I²C and SPI cover common sensor and display peripherals; and UART supports a simple host connection. Sixteen I/O positions leave useful control headroom in a 20-pin package, while two timers can implement periodic sampling or output timing. Its 8 KB Flash and 1 KB RAM require disciplined code organization for protocol-heavy products, but they are sufficient for focused firmware. Robust startup, brown-out monitoring, and watchdog use are recommended when the accessory must recover safely after an interrupted power supply.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk STM8S903F3U3TR — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini |
|---|---|
| Brand | STMicroelectronics |
| Package | 20-pin UFQFPN with exposed pad, 3 mm x 3 mm |
| Maximum Clock Speed | 16 MHz |
| Flash Program Memory | 8 KB |
| RAM | 1 KB |
| EEPROM | 640 bytes |
| Supply Voltage Range | 2.95 V to 5.5 V |
| ADC Resolution | 10-bit |
| Number of I/O Ports | 16 |
| Serial Interfaces | UART, SPI, and I²C |
| Timer Count | 2 timers |
| Lifecycle Status | Active |
Penyeberangsung Jelas
- Compact integration in a 20-pin UFQFPN (vsSTM8S903F3P6TR)
- Analog and timing resources in a compact MCU (vsSTM8S103F3P6TR)
- Broad serial-connectivity support (vsSTM8S005C6T6TR)
Catatan Desain
Use the manufacturer land pattern for the 20-pin UFQFPN and provide an uninterrupted ground plane beneath the exposed pad. Place the principal supply bypass capacitor close to the VDD and VSS pins, with its ground return connected directly to the nearest ground reference. Keep analog inputs away from UART, SPI, I²C, and switching-node routing. The 2.95 V to 5.5 V operating range does not eliminate the need to control supply transients, ringing, and ground-current paths.
Estimated: with a 5 V supply, a 3.3 V output, and a 10 mA load, the regulator input power is 0.05 W and the estimated power dissipation in the MCU is 0.017 W, calculated as (5 V - 3.3 V) x 0.01 A. Actual junction temperature depends on the die area, exposed-pad copper, ambient temperature, and switching activity. Use the exposed pad as a thermal path and follow the manufacturer’s maximum junction-temperature and package thermal data before finalizing the layout.
Assign every external pin from the manufacturer pin-description table rather than relying on another STM8S device with a similar order code. The UFQFPN has closely spaced leads and an exposed pad, so incorrect orientation or solder bridging can affect several I/O functions simultaneously. Confirm pin 1 using the package drawing, maintain the manufacturer’s minimum trace and spacing rules, and inspect the exposed-pad fillets after assembly. Separate analog ground paths carefully if an analog reference is required.
Do not treat the 8-bit STM8 core as interchangeable with a 32-bit Cortex-M device even when the clock speed and I/O count look attractive. A replacement program must account for instruction set, memory organization, bootloader behavior, interrupt vector layout, peripheral register differences, and development-tool compatibility. Also avoid assuming that the 10-bit ADC and 640-byte EEPROM match the exact accuracy, endurance, or retention requirements of a new product without reviewing the manufacturer electrical characteristics and qualification information.
Maklumat Kesediaan
The device listings identify the STM8S903F3U3TR as RoHS compliant. REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from current manufacturer documentation.