STMicroelectronics

STM8S903F3U3TR - 8-Bit 16MHz MCU, 8KB Flash | STMicroelectronics

MPN: STM8S903F3U3TR ✓ فعال
2.95 V to 5.5 V Vdss 20-pin UFQFPN with exposed pad Package 16 MHz Speed 8 KB (8K x 8) Memory
MOQ: 1 |

STM8S903F3U3TR جائزہ

The STMicroelectronics STM8S903F3U3TR is an 8-bit STM8S-series microcontroller with a 16 MHz clock, 8 KB of Flash program memory, 1 KB of RAM, and 640 bytes of EEPROM. It operates from 2.95 V to 5.5 V and provides 16 I/O ports in a 20-pin UFQFPN package with an exposed pad. The device also integrates a 10-bit ADC, two timers, UART, SPI, and I²C interfaces.

An 8-bit microcontroller is a compact embedded-control component used to execute firmware, monitor inputs, and control outputs. The STM8S family belongs to the broader microcontroller and embedded-processing hierarchy, combining a CPU core, nonvolatile program memory, data memory, communications peripherals, and analog conversion functions in one package. The STM8S903 access line is aimed at small controllers that need useful connectivity and analog features without a higher-cost 32-bit architecture.

The principal advantages of the STM8S903F3U3TR include its 16 MHz operating clock, 8 KB Flash capacity, 1 KB RAM, 640-byte EEPROM, 16 available I/O positions, and 2.95 V to 5.5 V supply range. These characteristics support compact control products that must combine serial communications, timed outputs, and analog measurement. Its RoHS-compliant construction also makes it suitable for designs managed under modern environmental material requirements.

The device integrates separate communication and timing resources rather than relying entirely on external components. Two timers support periodic and timing-intensive control functions, while UART, SPI, and I²C interfaces allow connection to sensors, displays, memory devices, transceivers, and other embedded peripherals. The 10-bit ADC provides a practical interface for analog sensor inputs. Because this is an 8-bit architecture, firmware, interrupt handling, and signal-processing requirements should be evaluated against the limited arithmetic width of the STM8 core.

Typical uses include compact motor controllers, appliance control panels, small sensor nodes, communications modules, industrial accessories, and low-cost embedded instruments. Its 20-pin UFQFPN format supports dense PCB layouts, while the exposed thermal pad provides a direct connection path for heat dissipation. Applications that require extensive protocol handling, large data storage, high-resolution conversion, or complex graphics should consider a more capable microcontroller family.

PCB implementation requires careful decoupling and exposed-pad layout. Place the supply bypass capacitor close to the device power pins, route sensitive analog inputs away from fast-switching nodes, and use continuous ground-plane construction. Connect the exposed pad to the appropriate ground and thermal copper area using the manufacturer’s footprint and land-pattern guidance. Confirm all peripheral pin assignments against the pin-description table before final routing.

This product page combines the verified device characteristics with package-level implementation guidance, lifecycle information, sourcing instructions, and a conservative evaluation of drop-in replacement options. It is intended to help engineers confirm electrical fit, interface availability, PCB compatibility, and application suitability before committing the STM8S903F3U3TR to a new design.

کے لیے ڈراپ اِن متبادل STM8S903F3U3TR — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں STM8S903F3U3TR (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Package, ADC Resolution, Flash Program Memory, RAM, Package Dimensions.

STMicroelectronics
Package: 20-pin TSSOP
ADC Resolution: 10 bits
موازنہ کریں STM8S903F3U3TR →
STMicroelectronics
Package: 32-pin UFQFPN
Flash Program Memory: 8 Kbyte
RAM: 1 Kbyte
موازنہ کریں STM8S903F3U3TR →

اس پروڈکٹ کے لیے کوئی ڈراپ اِن متبادل دستیاب نہیں۔

متبادل کی درخواست کریں

STM8S903F3U3TR زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Product Type 8-bit microcontroller
Series STM8S
Core Architecture STM8 CISC
Maximum Clock Speed 16 MHz
Flash Program Memory 8 KB (8K x 8)
RAM 1 KB
EEPROM 640 bytes
Supply Voltage Range 2.95 V to 5.5 V
ADC Resolution 10-bit
Number of I/O Ports 16
Timer Count 2 timers
Serial Interfaces UART, SPI, and I²C
Additional Connectivity IrDA and LIN bus
پیکیج 20-pin UFQFPN with exposed pad
Package Dimensions 3 mm x 3 mm
Package Pitch 0.65 mm
ماؤنٹنگ ٹائپ Surface mount
Shipping Format Tape and reel
RoHS Compliance Compliant

STM8S903F3U3TR 0.65 mm پن کنفیگریشن گائیڈ

STM8S903F3U3TR (0.65 mm پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

STM8S903F3U3TR کے لیے 0.65 mm پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں STM8S903F3U3TR.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

STM8S903F3U3TR کے لیے موزوں ہے 6 ایپلیکیشنs: Compact Motor Control, Industrial Sensor Node, Appliance Control Panel, UART Communication Module, Low-Cost Data Acquisition Board, Embedded Accessory Controller.

🏭

Compact Motor Control

The STM8S903F3U3TR is suitable for compact motor-control modules because its two timers, PWM capability, and 16 I/O ports provide the basic resources needed for command decoding, speed references, and actuator outputs. The 10-bit ADC can monitor a current or position-related analog signal, while UART, SPI, or I²C can connect to a host, sensor, or driver stage. Operating from 2.95 V to 5.5 V supports common industrial and appliance rails. Designers should calculate switching losses in the external driver separately, because the MCU itself controls the system rather than carrying motor current directly. Firmware must also account for the 8-bit architecture and 1 KB RAM when coordinating timing-critical routines.

🧩

Industrial Sensor Node

The STM8S903F3U3TR fits small industrial sensor nodes that combine analog measurement with short-range serial communications. Its 10-bit ADC can acquire a conditioned sensor signal, while the 16 available I/O positions handle alarm, status, and digital-input functions. The 640-byte EEPROM preserves calibration or configuration values, and the 8 KB Flash capacity supports a focused acquisition and communications firmware image. I²C is appropriate for small sensors, SPI for faster peripherals, and UART for a local service connection. The 2.95 V minimum supply supports industrial rails with suitable regulation. Deployment should include brown-out, watchdog, and power-on reset functions to improve behavior during supply disturbances and long-duration unattended operation.

🏭

Appliance Control Panel

The STM8S903F3U3TR can serve as the controller in an appliance panel containing buttons, indicators, a display interface, and several electromechanical outputs. Its 16 I/O ports cover typical user-interface and discrete-control requirements, while the timers support blinking, debouncing, scanning, and periodic maintenance tasks. UART, SPI, and I²C provide options for a display controller, external storage, or a communication transceiver. The 16 MHz clock is suitable for responsive menu and status logic, and the 8 KB Flash and 1 KB RAM fit a compact embedded user interface. The 2.95 V to 5.5 V range permits integration with either 3.3 V or 5 V subsystems. Firmware should include brown-out and watchdog reset handling for reliable operation around mains-derived power systems.

🌐

UART Communication Module

The STM8S903F3U3TR is appropriate for a small protocol-conversion or service module built around UART connectivity. The controller can frame messages, manage local commands, update status indicators, and bridge data to an SPI or I²C peripheral. Its 16 MHz operating speed and 8 KB Flash provide room for a focused protocol stack, while the 640-byte EEPROM can hold configuration parameters such as addresses or calibration settings. The 10-bit ADC adds an optional monitoring channel for supply or signal-health checks without another mixed-signal device. A 20-pin UFQFPN helps keep the module compact, although the exposed pad must be tied to ground and thermally connected according to the manufacturer land pattern. Firmware and bootloader requirements should be frozen before production because pin-compatible alternatives are not established.

📊

Low-Cost Data Acquisition Board

The STM8S903F3U3TR can form the center of a compact data-acquisition device when the measured signal does not require more than 10-bit resolution. The ADC, 16 I/O lines, and two timers support periodic sampling, trigger handling, and digital status capture. Flash stores firmware and small lookup tables, RAM supports working buffers, and EEPROM retains configuration across power cycles. SPI is useful for a higher-speed ADC or external storage device, while UART can export collected records to a host. The 2.95 V to 5.5 V operating range enables use with both common logic rails. For analog accuracy, separate sensitive sensor paths from digital and switching nodes, provide local reference and input conditioning, and calibrate the implemented system rather than assuming ideal converter behavior.

🔧

Embedded Accessory Controller

The STM8S903F3U3TR fits small accessories that need local control, serial communication, and a few analog or digital inputs. Examples include environmental monitors, actuator interfaces, cable controls, and programmable indicator blocks. The 10-bit ADC can sample a light, temperature-derived, or resistive sensor signal; I²C and SPI cover common sensor and display peripherals; and UART supports a simple host connection. Sixteen I/O positions leave useful control headroom in a 20-pin package, while two timers can implement periodic sampling or output timing. Its 8 KB Flash and 1 KB RAM require disciplined code organization for protocol-heavy products, but they are sufficient for focused firmware. Robust startup, brown-out monitoring, and watchdog use are recommended when the accessory must recover safely after an interrupted power supply.

What are the key specifications of STM8S903F3U3TR that engineers should know?
The STM8S903F3U3TR is an active 8-bit STM8S microcontroller operating up to 16 MHz with 8 KB of Flash, 1 KB of RAM, and 640 bytes of EEPROM. According to the STMicroelectronics STM8S903F3 product page, the access-line family includes integrated true data EEPROM, while device listings identify 16 I/O ports, a 10-bit ADC, two timers, and UART, SPI, and I²C interfaces. It accepts a 2.95 V to 5.5 V supply and is packaged in a 20-pin, 3 mm by 3 mm UFQFPN with an exposed pad.
What is the operating voltage of STM8S903F3U3TR?
The STM8S903F3U3TR operates from 2.95 V to 5.5 V. The manufacturer and distributor device records identify this supply range for the STM8S903F3 family. This range supports both 3.3 V and 5 V system architectures, although the design must maintain the input voltage within the specified limits during startup, reset, and normal operation. Use the pin-description table in the manufacturer datasheet to identify the supply and ground pins before laying out the power network.
How much Flash memory and RAM does STM8S903F3U3TR have?
The STM8S903F3U3TR provides 8 KB of Flash program memory, 1 KB of RAM, and 640 bytes of EEPROM. According to the STMicroelectronics product-page summary, the STM8S903 access line includes integrated true data EEPROM. These memory resources are appropriate for compact embedded control tasks using the 8-bit STM8 architecture. Firmware capacity should be checked after accounting for the bootloader, interrupt routines, communication stacks, and application logic.
Where can I download the STM8S903F3U3TR datasheet PDF?
The official STM8S903F3 documentation is available through the STMicroelectronics product page at https://www.st.com/en/microcontrollers-microprocessors/stm8s903f3.html. The product page provides access to the manufacturer documentation and device-support resources. Use that documentation for the authoritative pin description, electrical characteristics, package drawings, flash programming information, and errata before completing the hardware design.
Where can I find the STM8S903F3U3TR pinout?
The STM8S903F3U3TR pinout is identified in the pin-description table of the manufacturer datasheet. The exact package is a 20-pin UFQFPN measuring 3 mm by 3 mm and includes an exposed thermal pad. Because a complete pin-number-to-function list is not present in the accessible device summaries, use the manufacturer pin table to assign every package terminal, including the exposed pad. Do not infer pin functions from similar STM8 devices.
What peripherals are integrated into STM8S903F3U3TR?
The STM8S903F3U3TR integrates a 10-bit ADC, two timers, UART, SPI, I²C, IrDA, and LIN bus connectivity. According to the device specifications, it also includes brown-out detection and reset, power-on reset, PWM, and a watchdog timer. This combination supports compact products that acquire analog measurements, communicate with external sensors and displays, and generate periodic control outputs without requiring separate interface devices.
Is STM8S903F3U3TR suitable for motor control and industrial control products?
The STM8S903F3U3TR is suitable for compact motor-control, appliance, accessory, and industrial-control designs that fit its 8-bit processing and memory limits. Its two timers, PWM capability, 10-bit ADC, 16 I/O ports, and multiple serial interfaces provide useful control resources. For safety-critical or automotive systems, verify qualification requirements and use the appropriate qualified device rather than assuming the commercial-grade part meets them.
STM8S903F3U3TR vs STM8S103F3P6TR: which MCU should be selected?
The STM8S903F3U3TR and STM8S103F3P6TR are not verified as drop-in replacements because their package order codes identify different physical formats: UFQFPN for the U3TR part and TSSOP for the P6TR part. The STM8S903 family provides a 10-bit ADC, two timers, UART, SPI, and I²C, while the STM8S103 family requires separate verification of its peripheral set. Choose according to the required footprint and complete peripheral specification, not simply the shared STM8 family name.
STM8S903F3U3TR vs STM8S903F3U3: are both the same device?
STM8S903F3U3TR and STM8S903F3U3 identify the same electrical device family but use different order-code suffixes for packaging or shipping format. The TR suffix denotes tape-and-reel presentation, while the base U3 device is specified without that reel suffix. This distinction affects procurement and incoming-reel handling, not the core 16 MHz, 8 KB Flash, 1 KB RAM, and 640-byte EEPROM device configuration.
When should I choose STM8S903F3U3TR instead of another STM8 microcontroller?
Choose STM8S903F3U3TR when a design needs an 8-bit controller with 16 MHz operation, 8 KB Flash, 1 KB RAM, 640 bytes of EEPROM, 16 I/O ports, a 10-bit ADC, two timers, and multiple serial interfaces in a compact UFQFPN package. Select another STM8 member when its exact memory size, package, ADC channels, timer resources, or pin assignments provide a better match. The complete manufacturer pin and peripheral tables should drive the final selection.
What is the best drop-in replacement for STM8S903F3U3TR?
No drop-in replacement has been established for the STM8S903F3U3TR from the available cross-reference results. A valid replacement must use the same 20-pin UFQFPN footprint, preserve pin-to-pin function assignments, and provide compatible 16 MHz performance, 8 KB Flash, 1 KB RAM, 640-byte EEPROM, ADC, timer, and serial-interface resources. Similar STM8 devices in other packages or with different peripheral configurations are not drop-in substitutes and may require a PCB redesign.
Can another manufacturer replace STM8S903F3U3TR without changing the PCB?
A cross-manufacturer drop-in replacement has not been verified for the STM8S903F3U3TR. The target uses a proprietary STM8 core and toolchain, so binary compatibility, bootloader behavior, peripheral mapping, and electrical timing must all be established before substituting another manufacturer’s device. The available cross-reference results do not establish a pin-compatible second source. Treat any cross-vendor proposal as a new design requiring board-level and firmware validation.
Where can I buy STM8S903F3U3TR and check current availability?
Use the Request a Quote form on this page to ask for STM8S903F3U3TR availability, order quantity, lead time, and shipment format. The exact reel quantity and current allocation should be confirmed for the factory packing code before releasing a production order. The manufacturer lists the STM8S903F3 family as active, while current market availability can vary by region, quantity, and supply chain conditions.
How much does STM8S903F3U3TR cost?
The current commercial price is best obtained through the Request a Quote form on this page. Pricing for this microcontroller depends on order quantity, factory packing format, required lifecycle assurance, and market conditions. The structured pricing area is designed to refresh transaction data without embedding a potentially stale price in the engineering description, so buyers should use the quote form for the amount applicable to their order.
What is the lead time for STM8S903F3U3TR?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. The manufacturer identifies the STM8S903F3 family as active, but production allocation and delivery timing can change with order size and inventory conditions. For scheduled production, request a written lead-time commitment for the exact STM8S903F3U3TR order code and specify the required tape-and-reel format.

کے لیے انجینئرنگ ریفرنس ڈیٹا STM8S903F3U3TR — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the STM8S903F3U3TR for a compact 8-bit embedded design that needs 16 MHz operation, 8 KB Flash, 1 KB RAM, 640 bytes of EEPROM, a 10-bit ADC, two timers, and UART, SPI, and I²C connectivity. Its 20-pin UFQFPN package is attractive for space-constrained boards, but the exposed-pad layout must be implemented carefully. Consider STM8S903F3P6TR only after comparing package dimensions and PCB compatibility because its P6 suffix denotes a different physical package. Choose STM8S103-family devices when their exact memory, ADC, timer, and interface mix is sufficient and their package is preferable. Choose STM8S207-class devices when application code, RAM, Flash, or peripheral requirements exceed the STM8S903F3U3TR limits. No unqualified drop-in replacement should be selected: verify the footprint, pin functions, electrical limits, firmware dependencies, and lifecycle requirements before approving a substitution.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ
Brand STMicroelectronics
Package 20-pin UFQFPN with exposed pad, 3 mm x 3 mm
Maximum Clock Speed 16 MHz
Flash Program Memory 8 KB
RAM 1 KB
EEPROM 640 bytes
Supply Voltage Range 2.95 V to 5.5 V
ADC Resolution 10-bit
Number of I/O Ports 16
Serial Interfaces UART, SPI, and I²C
Timer Count 2 timers
Lifecycle Status Active

اہم امتیازی خصوصیات

  • Compact integration in a 20-pin UFQFPN (بمقابلہSTM8S903F3P6TR)
  • Analog and timing resources in a compact MCU (بمقابلہSTM8S103F3P6TR)
  • Broad serial-connectivity support (بمقابلہSTM8S005C6T6TR)

ڈیزائن نوٹس

Use the manufacturer land pattern for the 20-pin UFQFPN and provide an uninterrupted ground plane beneath the exposed pad. Place the principal supply bypass capacitor close to the VDD and VSS pins, with its ground return connected directly to the nearest ground reference. Keep analog inputs away from UART, SPI, I²C, and switching-node routing. The 2.95 V to 5.5 V operating range does not eliminate the need to control supply transients, ringing, and ground-current paths.

Estimated: with a 5 V supply, a 3.3 V output, and a 10 mA load, the regulator input power is 0.05 W and the estimated power dissipation in the MCU is 0.017 W, calculated as (5 V - 3.3 V) x 0.01 A. Actual junction temperature depends on the die area, exposed-pad copper, ambient temperature, and switching activity. Use the exposed pad as a thermal path and follow the manufacturer’s maximum junction-temperature and package thermal data before finalizing the layout.

Assign every external pin from the manufacturer pin-description table rather than relying on another STM8S device with a similar order code. The UFQFPN has closely spaced leads and an exposed pad, so incorrect orientation or solder bridging can affect several I/O functions simultaneously. Confirm pin 1 using the package drawing, maintain the manufacturer’s minimum trace and spacing rules, and inspect the exposed-pad fillets after assembly. Separate analog ground paths carefully if an analog reference is required.

Do not treat the 8-bit STM8 core as interchangeable with a 32-bit Cortex-M device even when the clock speed and I/O count look attractive. A replacement program must account for instruction set, memory organization, bootloader behavior, interrupt vector layout, peripheral register differences, and development-tool compatibility. Also avoid assuming that the 10-bit ADC and 640-byte EEPROM match the exact accuracy, endurance, or retention requirements of a new product without reviewing the manufacturer electrical characteristics and qualification information.

تعمیل کی معلومات

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The device listings identify the STM8S903F3U3TR as RoHS compliant. REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from current manufacturer documentation.

متعلقہ تلاشیں

STM8S903F3U3TR datasheet STM8S903F3U3TR datasheet pdf STM8S903F3U3TR pinout STM8S903F3U3TR specifications STM8S903F3U3TR equivalent STM8S903F3U3TR replacement STM8S903F3U3TR price STM8S903F3U3TR stock STMicroelectronics STM8S903F3U3TR STM8S903F3 16MHz 8KB flash STM8S903F3 20 UFQFPN STM8S903F3U3TR vs STM8S103F3P6TR STM8S903F3U3TR application circuit STM8S903F3U3TR schematic

متعلقہ اجزاء اور اصطلاحات

STMicroelectronics STM8S903F3U3TR STM8S903F3 STM8S903F3P6TR STM8S103F3P6TR STM8S STM8 core 8-bit microcontroller embedded controller semiconductor 16 MHz clock 8 KB Flash 1 KB RAM 640-byte EEPROM 10-bit ADC UART SPI I²C IrDA LIN bus UFQFPN-20 QFN family surface mount SMD RoHS motor control industrial sensor node
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں