SY88973VEY - 3.2Gbps CML Limiting Amplifier | Microchip
MPN: SY88973VEY ✓ AktifSY88973VEY Ringkasan
A limiting postamplifier is a special-purpose high-speed amplifier stage that increases the amplitude of small electrical signals recovered from an optical receiver while shaping and limiting them into a digital output suitable for clock-and-data recovery, multiplexing, or other high-speed logic. In the device hierarchy, it belongs to the broader categories of amplifier IC, interface IC, signal-conditioning IC, and high-speed communication component.
The principal operating characteristics are multi-rate operation to 3.2 Gbps, 38 dB differential gain, and a 2 GHz 3 dB bandwidth. Its outputs are designed for CML inputs or AC-coupled PECL inputs, with 50 Ω CML data outputs and an output swing of 800 mVPP. Edge rates of 60 ps and typical random jitter of 5 ps RMS help preserve signal integrity in high-speed optical links. A TTL loss-of-signal function is also identified in the device description.
The SY88973V architecture combines wide bandwidth, high gain, and low noise in a compact surface-mount package. The 10-lead MSOP with exposed pad provides a practical thermal path on a PCB, while the single-supply operation supports both 3.3 V and 5 V system rails. The exposed-pad construction is particularly useful when the amplifier is operated continuously near its upper data-rate capability.
Typical uses include SONET optical-network receiver paths, optical-module signal conditioning, 3.2 Gbps backplane links, high-speed clock recovery front ends, and CML-to-PECL interface stages. The limiting function is appropriate when the receiver requires a consistent digital output amplitude from small, variable-amplitude input signals.
PCB implementation requires careful treatment of the exposed thermal pad, supply bypassing, high-speed differential routing, and output termination. Place the device close to the receiver or decision-circuit node to minimize trace loss, keep input and output return paths short, and use the manufacturer’s recommended resistor and capacitor values around the device.
This product page combines the manufacturer-device description with practical interface guidance, pin-package details, verified sourcing links, and a focused engineering comparison. It is designed to help engineers evaluate signal integrity, thermal handling, PCB implementation, and drop-in availability without relying on a generic distributor summary alone.
Pilihan pengganti yang segera untuk SY88973VEY — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Tiada pilihan pengganti yang segera untuk produk ini.
Minta AlternatifSY88973VEY Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | Limiting postamplifier IC |
| Maximum Data Rate | 3.2 Gbps |
| Minimum Amplified Signal Size | 10 mVPP |
| Differential Gain | 38 dB |
| 3 dB Bandwidth | 2 GHz |
| Low-Voltage Supply | +3.3 V ±10% |
| High-Voltage Supply | +5 V ±10% |
| Gambaran Suhu Operasi | -40°C to +85°C |
| Konfigurasi Output | 50 Ω CML data outputs |
| Output Swing | 800 mVPP |
| Compatible Receiver Inputs | CML inputs or AC-coupled PECL inputs |
| Edge Rate | 60 ps |
| Typical Random Jitter | 5 psRMS |
| Maximum Peak-to-Peak Jitter | 15 psPP |
| Kemasan | 10-MSOP with exposed pad, 3.00 mm width |
| Jenis Pemasangan | Surface mount |
Panduan Konfigurasi Pin SY88973VEY 10-msop with exposed pad, 3.00 mm width
Konfigurasi pin untuk SY88973VEY (10-msop with exposed pad, 3.00 mm width pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.
Tiada data garisan pin yang diperoleh untuk SY88973VEY.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
SY88973VEY patut untuk 6 aplikasis: SONET Optical Receiver Signal Conditioning, CML-to-AC-Coupled-PECL Interface, 3.2 Gbps Backplane Receiver, Optical Module Receive Path, Clock-and-Data-Recovery Front End, High-Speed Instrumentation Signal Conditioning.
SONET Optical Receiver Signal Conditioning
The SY88973VEY fits the receiver-side limiting-amplifier stage of a high-speed SONET optical link because it supports operation to 3.2 Gbps, applies 38 dB of differential gain, and accepts signals as small as 10 mVPP. Its 50 Ω CML outputs with 800 mVPP swing can feed a clock-and-data-recovery decision device or downstream digital interface. The 2 GHz 3 dB bandwidth provides margin above the maximum supported data rate, while 60 ps edges and 5 psRMS typical random jitter help preserve timing margin. Layout the amplifier close to the photodetector or receiver front end to minimize loss and noise before amplification.
Disebarkan
CML-to-AC-Coupled-PECL Interface
The SY88973VEY can bridge a high-speed CML-based receiver stage to an AC-coupled PECL interface because its outputs are specified as 50 Ω CML and its input signal range extends down to 10 mVPP. The 38 dB differential gain restores amplitude lost in optical or electrical channels, while the 800 mVPP output swing provides a usable signal level for the downstream comparator. A 3.3 V or 5 V single supply simplifies rail selection. The coupling network must preserve the required bias, impedance, and edge-rate behavior described in the manufacturer application circuit.
Disebarkan
3.2 Gbps Backplane Receiver
The SY88973VEY is appropriate for a 3.2 Gbps backplane receiver when the incoming differential signal is small and requires limiting before digital processing. Its 38 dB gain and 2 GHz 3 dB bandwidth give substantial amplification without narrowing the usable bandwidth near the target data rate. The 60 ps edge rate supports high-speed signaling, and 5 psRMS typical random jitter is valuable in a link with limited timing margin. Place the device near the receive connector or transceiver, maintain continuous reference planes, and use the recommended CML or AC-coupled PECL termination scheme.
Disebarkan
Optical Module Receive Path
In a compact optical module, the SY88973VEY can condition a weak differential signal recovered from a photodiode or transimpedance stage before it reaches the module’s clock-and-data-recovery circuitry. The minimum 10 mVPP input capability and 38 dB gain help recover amplitude, while the limiting action produces a consistent digital signal. Its 10-lead MSOP exposed-pad package supports dense module layouts, and operation from either +3.3 V or +5 V accommodates common optical-module rails. Thermal-pad layout, via-in-pad use, bypass placement, and high-speed return-path control are especially important in compact module construction.
Disebarkan
Clock-and-Data-Recovery Front End
The SY88973VEY can serve as the analog gain-and-limiting stage immediately preceding a clock-and-data-recovery circuit in a 3.2 Gbps interface. A small receiver signal of 10 mVPP is increased by the device’s 38 dB differential gain, and the 800 mVPP CML output swing gives the downstream circuitry a defined signal level. Its 2 GHz 3 dB bandwidth accommodates the operating data rate, while the listed jitter characteristics help preserve timing performance. Keep the path between the amplifier and recovery device short and use controlled impedances to avoid additional reflections.
Disebarkan
High-Speed Instrumentation Signal Conditioning
The SY88973VEY can be used in instrumentation that evaluates or regenerates differential signals operating at multi-gigabit rates. Its 38 dB gain and 2 GHz bandwidth make it useful when a small measured signal must be converted into a stable high-speed output, while the limiting function supports repeatable digital-level observations. The 3.3 V or 5 V supply range simplifies integration with mixed laboratory and embedded systems. Nevertheless, the amplifier is optimized for CML-family signaling rather than general-purpose analog measurement, so probe loading, jitter-sensitive routing, and differential impedance control require careful evaluation.
Disebarkan
Data referensi kejuruteraan untuk SY88973VEY — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini |
|---|---|
| Package | 10-MSOP with exposed pad |
| Brand | Microchip Technology |
| Product Type | Limiting postamplifier IC |
| Maximum Data Rate | 3.2 Gbps |
| Differential Gain | 38 dB |
| 3 dB Bandwidth | 2 GHz |
| Supply Voltage | +3.3 V ±10% or +5 V ±10% |
| Output Configuration | 50 Ω CML |
| Output Swing | 800 mVPP |
| Operating Temperature | -40°C to +85°C |
| Minimum Input Signal | 10 mVPP |
| Edge Rate | 60 ps |
Penyeberangsung Jelas
- Purpose-built receiver amplification (vsGeneral-purpose amplifier)
- Direct high-speed CML output capability (vsAC-coupled PECL-only interface design)
- Flexible single-rail supply operation (vsFixed-rail amplifier option)
Catatan Desain
Use the exposed pad as the principal thermal path for the 10-MSOP package. Provide the recommended solderable land beneath the pad, control thermal-via placement to balance conductivity and solderability, and connect the pad exactly as directed by the manufacturer datasheet. Good copper spreading limits junction-temperature rise during continuous 3.2 Gbps operation. Inspect assembled joints for voiding because excessive voids under an exposed pad can impair both heat transfer and mechanical reliability.
Keep the SY88973VEY close to the source of the small differential signal and avoid long stub branches between the device, terminations, and downstream receiver. Preserve continuous return paths under the high-speed pairs, use the manufacturer-recommended CML or AC-coupled PECL interface values, and place bypass capacitors close to the supply pins. Differential impedance and reference-plane discontinuities can otherwise degrade the useful edge rate and increase jitter beyond the nominal device characteristics.
Do not select a replacement solely because it is labeled a 3.2 Gbps limiting amplifier. Confirm the 10-lead MSOP pin assignments, exposed-pad connection, 3.3 V or 5 V supply behavior, output impedance and swing, gain-bandwidth product, jitter, loss-of-signal function, and termination requirements. Also distinguish SY88973VEY from the SY88973VEY-TR tape-and-reel ordering code: they are ordering representations of the same device family rather than distinct engineering alternatives.
Maklumat Kesediaan
No specific environmental or material-compliance declarations were included in the technical material for this device. The -40°C to +85°C industrial operating-temperature range does not by itself establish AEC-Q100 qualification.