TAS5026IPAG - 6-Channel Digital Audio PWM Processor | TI
MPN: TAS5026IPAG ✓ AktifTAS5026IPAG Ringkasan
A digital audio PWM processor is an interface IC that accepts encoded digital audio data, processes that data internally, and generates PWM signals suitable for driving audio output stages. Within the signal chain, it sits between a digital audio source and the power amplifier or speaker-driver circuitry. Unlike a conventional audio DAC followed by a separate modulator, this integrated processor combines digital data handling and PWM generation in one device.
The principal features of the TAS5026IPAG include six audio channels, digital I2S input, I2C control, and support for sample rates spanning 32 kHz through 192 kHz. These capabilities make the processor relevant to home-theater systems, multichannel powered speakers, active speaker arrays, and automotive audio designs. The broad sample-rate range supports conventional CD-rate audio as well as high-resolution PCM streams.
Texas Instruments describes the TAS5026 as a PurePath Digital audio modulator IC. Its digital control interface allows an embedded controller or system-on-chip to configure operating behavior, while the I2S interface receives audio data from a digital source. Because PWM output generation is consolidated into the processor, system designers can evaluate the complete digital-to-PWM signal path before adding external amplification and loudspeaker stages.
Typical applications include six-channel powered speakers, surround-sound receivers, active subwoofers, multimedia speaker systems, automotive head units, and home-audio distribution products. A typical implementation places the processor after an I2S-compatible audio source, connects I2C control lines to the system controller, and routes six PWM outputs toward amplifier inputs or external bridge drivers.
PCB design must preserve the integrity of the digital audio and clock connections while keeping switching outputs away from sensitive analog and control paths. Decoupling should be placed close to the device pins, and ground-return paths should follow the manufacturer layout recommendations. The 10 mm by 10 mm TQFP footprint also requires adequate solderable area and careful inspection of fine-pitch joints after assembly.
This product page combines the device identity, package information, interface characteristics, lifecycle details, and procurement workflow into a design-oriented reference. It also distinguishes the documented TAS5026 order variant from similarly named components and provides actionable guidance for PCB layout, digital-audio integration, and drop-in replacement assessment.
Pilihan pengganti yang segera untuk TAS5026IPAG — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
TAS5026APAGR
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
TAS5026IPAG Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | Six-channel digital audio PWM processor |
| Number of Audio Channels | 6 channels |
| Minimum Supported Sample Rate | 32 kHz |
| Maximum Supported Sample Rate | 192 kHz |
| Digital Audio Interface | I2S |
| Control Interface | I2C |
| Package Type | 64-pin TQFP |
| Package Body Size | 10 mm x 10 mm |
| Jenis Pemasangan | Surface mount |
| Output Modulation | PWM |
| Status RoHS | Compliant |
| Moisture Sensitivity Level | MSL1 |
| Standard Pack Quantity | 160 pieces |
Panduan Konfigurasi Pin TAS5026IPAG 10 mm x 10 mm
Konfigurasi pin untuk TAS5026IPAG (10 mm x 10 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk TAS5026IPAG.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
TAS5026IPAG patut untuk 6 aplikasis: Multichannel Home Theater, Powered Surround Speakers, Automotive Audio Head Unit, Active Subwoofer Array, Digital Speaker Network, Multimedia Speaker System.
Multichannel Home Theater
The TAS5026IPAG fits a six-channel home-theater signal path because it accepts I2S digital audio and generates six PWM outputs for downstream amplification. Its 32 kHz to 192 kHz sample-rate range supports conventional 44.1 kHz and 48 kHz program material as well as higher-resolution sources. A practical design connects the processor to an I2S-capable source, uses I2C for setup, and routes each PWM channel toward a separate amplifier or bridge-driver input.
Disebarkan
Powered Surround Speakers
In an active surround-speaker system, the TAS5026IPAG can receive a digital audio stream and provide six independently controlled PWM channels before power amplification. This architecture reduces the need for separate digital-to-analog conversion stages when the speaker platform is designed around digital input. The 64-pin TQFP keeps the processor compact, while I2S and I2C separate signal transport from configuration and simplify control by the system processor.
Disebarkan
Automotive Audio Head Unit
The TAS5026IPAG is applicable to a multichannel automotive audio head unit that receives digital audio from a source processor and drives six external amplifier channels. Support for 32 kHz to 192 kHz sampling accommodates multiple digital source rates, while I2C allows the vehicle head-unit controller to configure the processor. Designers should complete thermal, automotive-qualification, EMC, and transient-voltage reviews for the final vehicle platform before production release.
Disebarkan
Active Subwoofer Array
A multi-amplifier subwoofer architecture can use the TAS5026IPAG where six digital audio channels must be decoded and converted into PWM signals before low-level amplification. The processor’s six-channel organization allows one digital audio interface to serve several amplifier channels. Its sample-rate range supports common streaming and disc sources, and the I2C control path permits centralized setup from the subwoofer’s main controller.
Disebarkan
Digital Speaker Network
The TAS5026IPAG is well suited to a networked speaker endpoint that receives digital audio over an internal transport and converts it into six PWM outputs. Placing the processor near the speaker amplification section can preserve a digital signal path until the final power-conversion stage. The I2S interface carries audio data, I2C handles configuration, and the 32 kHz to 192 kHz range supports common network-audio sample formats.
Disebarkan
Multimedia Speaker System
The TAS5026IPAG can serve as the digital audio front end of a multimedia speaker system requiring multiple synchronized output channels. Its I2S input accepts PCM audio, its I2C interface allows a host controller to configure operating conditions, and six PWM outputs feed the amplifier section. The implementation should preserve continuous ground references beneath the fine-pitch TQFP and keep high-current amplifier routing separate from sensitive clock and data paths.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk TAS5026IPAG — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | TAS5026APAGR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 64-pin TQFP (10 x 10 mm) | 64-pin TQFP (10 x 10 mm) - same |
| Product Type | Six-channel digital audio PWM processor | Six-channel digital audio PWM processor |
| Number of Audio Channels | 6 channels | 6 channels |
| Digital Audio Interface | I2S | I2S |
| Control Interface | I2C | I2C |
| Sample-Rate Range | 32 kHz to 192 kHz | 32 kHz to 192 kHz |
| Output Modulation | PWM | PWM |
Penyeberangsung Jelas
- Six-channel digital PWM processing in one interface IC (vsTAS5026APAGR)
- Wide digital-audio sample-rate coverage (vsTAS5026APAGR)
- Separate digital audio and control paths (vsTAS5026APAGR)
Catatan Desain
Route the I2S data, clock, and I2C control signals as compact, continuous paths, and place input and output decoupling capacitors close to their designated package pins. Keep the 64-pin TQFP footprint within the manufacturer land-pattern tolerances, including the exposed-pad connection and thermal-via recommendation. Preserve a continuous ground reference beneath the device so switching current from the six PWM outputs does not disturb the digital interfaces.
Use the manufacturer clocking and digital-audio timing recommendations when connecting an external PCM source. I2S data, bit clock, and word-clock lines should have controlled impedance, short return paths, and minimal stubs. If the source uses a different sample rate or clock arrangement, verify the required configuration and supported clock relationship in the Texas Instruments datasheet before enabling all six output channels.
Calculate the supply requirements from the documented operating voltage and current limits before finalizing the power architecture. Place bulk and high-frequency decoupling at the regulator and the device according to the recommended application circuit. The exact capacitor values and stability requirements are not reproduced on this page; use the manufacturer datasheet values and account for startup sequencing across the audio source, processor, and external amplifier stages.
Do not treat the TAS5026APAGR ordering suffix as proof of drop-in interchangeability without checking the device revision and orderable status table. Confirm the 64-pin TQFP footprint, I2S and I2C interface behavior, electrical limits, temperature grade, and packing code. The processor generates PWM signals and still requires suitable downstream amplification; it is not a direct loudspeaker-power stage.
Maklumat Kesediaan
RoHS-compliant status and MSL1 packaging are documented in the product listing. Automotive qualification, REACH status, lead-free status, halogen-free status, and conflict-minerals status require confirmation from the current manufacturer product information.