Texas Instruments

TAS5026IPAG - 6-Channel Digital Audio PWM Processor | TI

料号: TAS5026IPAG ✓ 量产中
64-pin TQFP Package
最小起订量: 1 |

TAS5026IPAG 概述

Texas Instruments TAS5026IPAG is a six-channel digital audio PWM processor designed for high-fidelity digital audio interfacing, with operation across sample rates from 32 kHz to 192 kHz. The device supports I2C and I2S interfaces and is packaged in a 64-pin TQFP measuring 10 mm by 10 mm. Its architecture converts digital audio streams into six independently addressed PWM output channels for multichannel audio systems.

A digital audio PWM processor is an interface IC that accepts encoded digital audio data, processes that data internally, and generates PWM signals suitable for driving audio output stages. Within the signal chain, it sits between a digital audio source and the power amplifier or speaker-driver circuitry. Unlike a conventional audio DAC followed by a separate modulator, this integrated processor combines digital data handling and PWM generation in one device.

The principal features of the TAS5026IPAG include six audio channels, digital I2S input, I2C control, and support for sample rates spanning 32 kHz through 192 kHz. These capabilities make the processor relevant to home-theater systems, multichannel powered speakers, active speaker arrays, and automotive audio designs. The broad sample-rate range supports conventional CD-rate audio as well as high-resolution PCM streams.

Texas Instruments describes the TAS5026 as a PurePath Digital audio modulator IC. Its digital control interface allows an embedded controller or system-on-chip to configure operating behavior, while the I2S interface receives audio data from a digital source. Because PWM output generation is consolidated into the processor, system designers can evaluate the complete digital-to-PWM signal path before adding external amplification and loudspeaker stages.

Typical applications include six-channel powered speakers, surround-sound receivers, active subwoofers, multimedia speaker systems, automotive head units, and home-audio distribution products. A typical implementation places the processor after an I2S-compatible audio source, connects I2C control lines to the system controller, and routes six PWM outputs toward amplifier inputs or external bridge drivers.

PCB design must preserve the integrity of the digital audio and clock connections while keeping switching outputs away from sensitive analog and control paths. Decoupling should be placed close to the device pins, and ground-return paths should follow the manufacturer layout recommendations. The 10 mm by 10 mm TQFP footprint also requires adequate solderable area and careful inspection of fine-pitch joints after assembly.

This product page combines the device identity, package information, interface characteristics, lifecycle details, and procurement workflow into a design-oriented reference. It also distinguishes the documented TAS5026 order variant from similarly named components and provides actionable guidance for PCB layout, digital-audio integration, and drop-in replacement assessment.

直接替换替代料: TAS5026IPAG ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

TAS5026APAGR

✅ 直接替换
📦 64-pin TQFP (10 x 10 mm)
Same six-channel TAS5026A processor family and 64-pin TQFP footprint; the orderable suffix identifies a different device revision or packing option requiring final manufacturer-MPN confirmation.

📋 参考替代料(不在目录中)

TAS5026IPAG 最大额定值与电气特性

Product Type Six-channel digital audio PWM processor
Number of Audio Channels 6 channels
Minimum Supported Sample Rate 32 kHz
Maximum Supported Sample Rate 192 kHz
Digital Audio Interface I2S
Control Interface I2C
Package Type 64-pin TQFP
Package Body Size 10 mm x 10 mm
安装类型 Surface mount
Output Modulation PWM
RoHS 状态 Compliant
Moisture Sensitivity Level MSL1
Standard Pack Quantity 160 pieces

TAS5026IPAG 10 mm x 10 mm 引脚配置指南

TAS5026IPAG(10 mm x 10 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

TAS5026IPAG 的 10 mm x 10 mm 封装引脚图

暂无详细引脚数据: TAS5026IPAG.

请参阅 数据手册 以查看完整引脚配置。

典型应用

TAS5026IPAG 适用于 6 应用s: Multichannel Home Theater, Powered Surround Speakers, Automotive Audio Head Unit, Active Subwoofer Array, Digital Speaker Network, Multimedia Speaker System.

🎧

Multichannel Home Theater

The TAS5026IPAG fits a six-channel home-theater signal path because it accepts I2S digital audio and generates six PWM outputs for downstream amplification. Its 32 kHz to 192 kHz sample-rate range supports conventional 44.1 kHz and 48 kHz program material as well as higher-resolution sources. A practical design connects the processor to an I2S-capable source, uses I2C for setup, and routes each PWM channel toward a separate amplifier or bridge-driver input.

🔊

Powered Surround Speakers

In an active surround-speaker system, the TAS5026IPAG can receive a digital audio stream and provide six independently controlled PWM channels before power amplification. This architecture reduces the need for separate digital-to-analog conversion stages when the speaker platform is designed around digital input. The 64-pin TQFP keeps the processor compact, while I2S and I2C separate signal transport from configuration and simplify control by the system processor.

🚗

Automotive Audio Head Unit

The TAS5026IPAG is applicable to a multichannel automotive audio head unit that receives digital audio from a source processor and drives six external amplifier channels. Support for 32 kHz to 192 kHz sampling accommodates multiple digital source rates, while I2C allows the vehicle head-unit controller to configure the processor. Designers should complete thermal, automotive-qualification, EMC, and transient-voltage reviews for the final vehicle platform before production release.

🔉

Active Subwoofer Array

A multi-amplifier subwoofer architecture can use the TAS5026IPAG where six digital audio channels must be decoded and converted into PWM signals before low-level amplification. The processor’s six-channel organization allows one digital audio interface to serve several amplifier channels. Its sample-rate range supports common streaming and disc sources, and the I2C control path permits centralized setup from the subwoofer’s main controller.

🌐

Digital Speaker Network

The TAS5026IPAG is well suited to a networked speaker endpoint that receives digital audio over an internal transport and converts it into six PWM outputs. Placing the processor near the speaker amplification section can preserve a digital signal path until the final power-conversion stage. The I2S interface carries audio data, I2C handles configuration, and the 32 kHz to 192 kHz range supports common network-audio sample formats.

💻

Multimedia Speaker System

The TAS5026IPAG can serve as the digital audio front end of a multimedia speaker system requiring multiple synchronized output channels. Its I2S input accepts PCM audio, its I2C interface allows a host controller to configure operating conditions, and six PWM outputs feed the amplifier section. The implementation should preserve continuous ground references beneath the fine-pitch TQFP and keep high-current amplifier routing separate from sensitive clock and data paths.

推荐产品汇总

TAS5026IPAG Texas Instruments 用于: Multichannel Home Theater, Powered Surround Speakers, Automotive Audio Head Unit, Active Subwoofer Array, Digital Speaker Network, Multimedia Speaker System TAS5062 Digital audio power amplifier family 用于: Multichannel Home Theater, Powered Surround Speakers, Automotive Audio Head Unit, Active Subwoofer Array, Digital Speaker Network, Multimedia Speaker System PCM1794A stereo audio DAC for source-side conversion 用于: Multichannel Home Theater, Multimedia Speaker System
What is the TAS5026IPAG?
The TAS5026IPAG is a Texas Instruments six-channel digital audio PWM processor for high-fidelity audio interfaces. According to the manufacturer datasheet, it accepts digital audio through I2S, supports I2C control, operates from 32 kHz to 192 kHz sample rates, and generates six PWM audio channels. It is housed in a 64-pin TQFP package measuring 10 mm by 10 mm.
Which audio interfaces does the TAS5026IPAG support?
The TAS5026IPAG supports I2S for digital audio data and I2C for configuration and control. According to the Texas Instruments datasheet, the I2S connection accepts digital PCM audio while the I2C interface provides a separate control path to a host controller. This division supports a clean architecture in which an audio source streams samples while a microcontroller manages device configuration.
What sample rates are supported by the TAS5026IPAG?
The TAS5026IPAG supports sample rates from 32 kHz through 192 kHz. According to the Texas Instruments product information and datasheet, this range accommodates 44.1 kHz and 48 kHz consumer-audio streams as well as 96 kHz, 128 kHz, and 192 kHz high-resolution formats. The chosen system clock and source format must satisfy the device configuration requirements.
Where can I download the TAS5026IPAG datasheet PDF?
The TAS5026IPAG datasheet PDF is available through the Texas Instruments document linked on this page and through the manufacturer-hosted copy listed in the product resources. The document is titled for the TAS5026A six-channel digital audio PWM processor and includes the device description, electrical characteristics, register information, and application guidance. Use the manufacturer PDF for authoritative pin names and timing limits.
Where can I find the TAS5026IPAG pinout?
The TAS5026IPAG pinout is published in the pin-configuration section of the Texas Instruments manufacturer datasheet. The device uses a 64-pin TQFP package, so the package drawing contains 64 numbered terminals around the body. Assign PCB nets directly from the datasheet pin table and preserve the exposed-pad and thermal-layout requirements specified for this package.
What is the TAS5026IPAG package?
The TAS5026IPAG is packaged in a 64-pin TQFP with a 10 mm by 10 mm body. According to the Texas Instruments product documentation, the package is designed for surface-mount assembly. Its 64-pin footprint must be laid out using the manufacturer drawing, including the recommended land pattern, solder mask, and thermal-via arrangement where applicable.
Can the TAS5026IPAG be used for multichannel home theater systems?
Yes, the TAS5026IPAG is suitable for multichannel home-theater audio paths that require six digital PWM channels. Its 32 kHz to 192 kHz sample-rate support accommodates common digital-audio formats, while I2S carries audio data and I2C handles configuration. The processor is designed to work upstream of amplifier or bridge-driver stages rather than driving a loudspeaker directly.
How does the TAS5026IPAG fit into a powered-speaker design?
The TAS5026IPAG can sit between an I2S audio source and the power-amplifier section of a six-channel powered speaker. The I2S interface receives digital samples, the processor generates six PWM outputs, and external circuitry supplies the required power amplification and speaker drive. According to the Texas Instruments datasheet, its six-channel architecture makes it appropriate for active surround-speaker and multimedia systems.
When should I choose the TAS5026IPAG over another digital audio modulator?
Choose the TAS5026IPAG when the design requires six digital PWM audio channels, I2S audio transfer, I2C configuration, and a 64-pin TQFP footprint. Its documented support for sample rates from 32 kHz to 192 kHz also makes it suitable for both conventional and high-resolution audio. Select another modulator only when a different channel count, interface, package, or output architecture better matches the amplifier chain.
TAS5026IPAG vs TAS5026APAGR - which one should be selected?
The TAS5026IPAG and TAS5026APAGR both appear in Texas Instruments ordering information for the 64-pin TAS5026A six-channel digital audio PWM processor family. The Texas Instruments datasheet is the controlling document for device revisions and orderable suffix differences. Confirm the required revision, temperature grade, packing code, and regulatory status in the current manufacturer part information before treating either MPN as a substitute.
What is the best drop-in replacement for the TAS5026IPAG?
The closest documented drop-in candidate is the TAS5026APAGR, which is associated with the same 64-pin TAS5026A processor family. A valid replacement must match the 64-pin TQFP footprint, six-channel PWM architecture, I2S data interface, I2C control interface, and electrical characteristics. Use the Request a Quote form on this page to confirm the exact orderable MPN, availability, and manufacturing traceability.
Can another manufacturer replace the TAS5026IPAG without a PCB redesign?
A cross-manufacturer replacement should be treated as unavailable until a candidate is documented as pin-to-pin compatible with the 64-pin TQFP footprint and matches the I2S, I2C, PWM, clocking, voltage, and timing requirements. No cross-brand drop-in equivalent is established here. An engineer should use the manufacturer cross-reference search and compare the complete datasheets before approving a second-source part.
Where can I buy the TAS5026IPAG online?
The TAS5026IPAG can be requested through the Request a Quote form on this page. Submit the required quantity, target reel or tray configuration, and any date-code or traceability requirements with the request. The form provides a direct purchasing path without embedding a volatile price or inventory claim that may change independently of the device.
What is the price of the TAS5026IPAG?
The current commercial price for the TAS5026IPAG is shown through the Request a Quote form on this page. Submit the required quantity and packaging preferences to receive a current quotation. Pricing can vary with order quantity, production volume, traceability requirements, and component availability, so the quotation form is the appropriate source for a purchasing decision.
What is the lead time and stock status for the TAS5026IPAG?
Current stock status and lead time should be confirmed through the Request a Quote form on this page. Include the required quantity, date-code tolerance, and target delivery date in the request. This approach provides a transaction-specific availability response instead of relying on a distributor listing that may not reflect current factory and logistics conditions.
What key specifications of the TAS5026IPAG should engineers know?
The TAS5026IPAG is a six-channel digital audio PWM processor with I2S audio input, I2C control, and support for 32 kHz to 192 kHz sample rates. According to the Texas Instruments datasheet, it is packaged in a 64-pin, 10 mm by 10 mm TQFP. Its primary design roles are receiving digital PCM audio, configuring six output channels, and generating PWM signals for downstream amplification.

工程参考数据: TAS5026IPAG ——对比、设计指导和合规信息。

选型指南

Choose the TAS5026IPAG when the design requires a six-channel digital audio PWM processor with I2S audio input, I2C control, and support for sample rates from 32 kHz to 192 kHz in a 64-pin TQFP. It is particularly suitable for powered speakers, home-theater products, active subwoofers, and digital multimedia speakers that use a downstream power-amplifier stage. The TAS5026APAGR belongs to the same documented processor family and may be preferable when the current Texas Instruments ordering table designates it as the required revision or packing option. No cross-brand drop-in substitute should be selected without a complete pin, electrical, timing, and functional comparison. In every case, verify the exact orderable MPN, operating-temperature grade, footprint, lifecycle status, and availability before committing the PCB or production BOM.

与替代料对比

参数 本产品 TAS5026APAGR
Brand Texas Instruments Texas Instruments
Package 64-pin TQFP (10 x 10 mm) 64-pin TQFP (10 x 10 mm) - same
Product Type Six-channel digital audio PWM processor Six-channel digital audio PWM processor
Number of Audio Channels 6 channels 6 channels
Digital Audio Interface I2S I2S
Control Interface I2C I2C
Sample-Rate Range 32 kHz to 192 kHz 32 kHz to 192 kHz
Output Modulation PWM PWM

关键差异点

  • Six-channel digital PWM processing in one interface IC (对比 TAS5026APAGR)
  • Wide digital-audio sample-rate coverage (对比 TAS5026APAGR)
  • Separate digital audio and control paths (对比 TAS5026APAGR)

设计说明

Route the I2S data, clock, and I2C control signals as compact, continuous paths, and place input and output decoupling capacitors close to their designated package pins. Keep the 64-pin TQFP footprint within the manufacturer land-pattern tolerances, including the exposed-pad connection and thermal-via recommendation. Preserve a continuous ground reference beneath the device so switching current from the six PWM outputs does not disturb the digital interfaces.

Use the manufacturer clocking and digital-audio timing recommendations when connecting an external PCM source. I2S data, bit clock, and word-clock lines should have controlled impedance, short return paths, and minimal stubs. If the source uses a different sample rate or clock arrangement, verify the required configuration and supported clock relationship in the Texas Instruments datasheet before enabling all six output channels.

Calculate the supply requirements from the documented operating voltage and current limits before finalizing the power architecture. Place bulk and high-frequency decoupling at the regulator and the device according to the recommended application circuit. The exact capacitor values and stability requirements are not reproduced on this page; use the manufacturer datasheet values and account for startup sequencing across the audio source, processor, and external amplifier stages.

Do not treat the TAS5026APAGR ordering suffix as proof of drop-in interchangeability without checking the device revision and orderable status table. Confirm the 64-pin TQFP footprint, I2S and I2C interface behavior, electrical limits, temperature grade, and packing code. The processor generates PWM signals and still requires suitable downstream amplification; it is not a direct loudspeaker-power stage.

合规信息

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

RoHS-compliant status and MSL1 packaging are documented in the product listing. Automotive qualification, REACH status, lead-free status, halogen-free status, and conflict-minerals status require confirmation from the current manufacturer product information.

相关搜索

TAS5026IPAG datasheet TAS5026IPAG specifications TAS5026IPAG pinout TAS5026IPAG datasheet pdf TAS5026IPAG application circuit TAS5026IPAG replacement TAS5026IPAG equivalent TAS5026IPAG cross reference TAS5026IPAG vs TAS5026APAGR Texas Instruments TAS5026IPAG TAS5026IPAG price TAS5026IPAG stock

相关元器件 & 术语

Texas Instruments TAS5026IPAG TAS5026APAGR TAS5026A PurePath Digital digital audio PWM processor audio modulator IC digital signal processing integrated circuit I2S I2C PCM audio PWM six-channel audio 32 kHz 48 kHz 192 kHz 64-pin TQFP 10 mm by 10 mm package surface mount RoHS MSL1 powered speaker home theater automotive audio
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情