Texas Instruments

TAS5101IDAP - 15W Stereo Class-D Amplifier | Texas Instruments

MPN: TAS5101IDAP ✗ Akhir Hayat
3 V to 3.6 V Vdss 32-pin HTSSOP with exposed pad Package
MOQ: 1 |

TAS5101IDAP Ringkasan

The Texas Instruments TAS5101IDAP is a 15 W-per-channel stereo Class-D audio power amplifier with a PWM stereo power output stage, housed in a 32-pin HTSSOP package. It operates from a 3 V to 3.6 V supply and is specified for an industrial ambient-temperature range of -40°C to +85°C. The device is intended for compact audio systems that require efficient Class-D output stages without the efficiency penalty of a conventional linear amplifier.

A Class-D audio amplifier is a switching power amplifier whose output transistors operate at high frequency. Compared with a linear audio amplifier, the switching architecture can deliver greater power efficiency, although filtering and electromagnetic compatibility remain important design considerations. The TAS5101IDAP belongs to the broader hierarchy of audio amplifier IC, power amplifier IC, and power management semiconductor, with its PWM output stage intended to drive stereo speaker networks.

Key performance characteristics include greater-than-95-dB dynamic range in a typical digital audio amplifier system, 0.1% THD+N at 1 kHz while delivering 15 W RMS into 4 Ω, and greater-than-90% power efficiency into an 8 Ω load. These specifications make the device suitable for applications where output power, conversion efficiency, and integrated stereo amplification must coexist within a compact surface-mount design.

The TAS5101 uses a true digital stereo audio architecture with a PWM power output stage. Its single-ended output arrangement and 3 V to 3.6 V supply operation suit low-voltage portable and connected-audio systems. The exposed-pad HTSSOP construction is intended for board-level heat dissipation, but correct land-pattern implementation and thermal management remain essential when operating near the 15 W per-channel performance point.

Typical uses include compact stereo speakers, portable audio equipment, smart displays, sound bars, multimedia systems, and other products needing two amplified audio channels. The 32-pin HTSSOP package supports surface-mount assembly, while the 3 V to 3.6 V supply range is particularly suitable for systems powered from regulated low-voltage rails.

Designers should follow the manufacturer datasheet for pin assignments, output filtering, supply decoupling, exposed-pad layout, and thermal calculations. Particularly in portable systems, verify speaker impedance, peak channel power, and simultaneous-load dissipation before selecting inductors, capacitors, copper area, and output filters.

This product page organizes the documented electrical characteristics, package details, application guidance, comparison information, and practical design considerations into a design-focused reference for engineers evaluating the TAS5101IDAP.

Pilihan pengganti yang segera untuk TAS5101IDAP — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

TAS5101DAPRG4

✅ Masuk Drop-In
📦 32-pin HTSSOP with exposed pad
Same 32-pin HTSSOP exposed-pad format and consistent terminals; orderable suffix differs, with exact electrical and lifecycle equivalence still requiring datasheet confirmation

📋 Alternatif rujukan (tidak dalam katalog)

TAS5101IDAP Penilaian maksimum & Ciri-ciri Elektrik

Product Type Stereo Class-D audio power amplifier
Channel Count 2 channels
Konfigurasi Output Single-ended stereo PWM output
Rated Output Power 15 W RMS per channel into 4 Ω
THD+N 0.1% at 1 kHz, 15 W RMS into 4 Ω
Dynamic Range >95 dB in a typical digital audio amplifier system
Power Efficiency >90% into an 8 Ω load
Supply Voltage Range 3 V to 3.6 V
Gambaran Suhu Operasi -40°C to +85°C ambient
Temperature Grade Industrial
Kemasan 32-pin HTSSOP with exposed pad
Package Body Width 6.10 mm
Package Lead Pitch 0.240 in
Jenis Pemasangan Surface mount

Panduan Konfigurasi Pin TAS5101IDAP 0.240 in

Konfigurasi pin untuk TAS5101IDAP (0.240 in pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai 0.240 in untuk TAS5101IDAP

Tiada data garisan pin yang diperoleh untuk TAS5101IDAP.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

TAS5101IDAP patut untuk 6 aplikasis: Compact Stereo Speaker, Portable Audio System, Smart Display Audio, Soundbar and Home Theater, Multimedia Speaker Dock, Industrial Control Panel Audio.

🎧

Compact Stereo Speaker

The TAS5101IDAP fits compact stereo speakers that need substantial output from a low-voltage 3 V to 3.6 V system rail. Its documented 15 W RMS per channel into 4 Ω capability and 0.1% THD+N at 1 kHz provide a useful target for clean playback in desktop speakers, bookshelf speakers, and compact multimedia systems. Greater-than-90% efficiency into an 8 Ω load also reduces heat in portable or space-constrained enclosures. The 32-pin HTSSOP exposed pad must be connected to an effective PCB thermal area, and output-filter components should follow the manufacturer reference design.

📱

Portable Audio System

The TAS5101IDAP is appropriate for portable audio systems operating from a regulated 3 V to 3.6 V rail, including wireless speakers and connected portable products. Its greater-than-90% efficiency into an 8 Ω load improves the relationship between delivered audio power and battery consumption. The 15 W RMS per-channel rating into 4 Ω supports higher-power designs, while greater-than-95-dB dynamic range in a typical digital audio amplifier system preserves signal-to-noise margin. Designers should still model average playback power, peak thermal conditions, speaker impedance, and filter losses because those determine actual battery and enclosure performance.

📺

Smart Display Audio

The TAS5101IDAP can support stereo audio in smart displays where a 3 V to 3.6 V system rail and two amplified channels are available. Its 0.1% THD+N at 1 kHz under a 15 W RMS into 4 Ω condition provides a useful starting point for minimizing distortion in a compact acoustic enclosure. The 32-pin exposed-pad HTSSOP package is practical for multilayer PCB construction, provided the thermal pad receives adequate copper and vias. Input-format compatibility, speaker loading, startup behavior, and EMI filtering should be validated together in the complete display design.

🏠

Soundbar and Home Theater

The TAS5101IDAP suits compact soundbar or home-theater auxiliaries requiring two channels of efficient Class-D output from a 3 V to 3.6 V rail. Its 15 W RMS per-channel capability into 4 Ω is appropriate for compact speakers, while greater-than-90% efficiency into 8 Ω helps control amplifier heat. The device's greater-than-95-dB dynamic range in a typical digital audio amplifier system supports clean signal reproduction from digital sources. Soundbar designs should account for simultaneous full-scale playback, output-filter component loss, enclosure heat accumulation, and the amplifier's exposed-pad thermal path.

🔊

Multimedia Speaker Dock

The TAS5101IDAP is a practical fit for docking speakers and multimedia systems that combine digital audio input with passive speakers. Its two-channel single-ended Class-D architecture removes the need for separate left and right output amplifiers, and the 3 V to 3.6 V operating range aligns with common low-voltage system rails. The specified 15 W RMS into 4 Ω condition offers enough power for compact desktop enclosures, while the >90% efficiency target into 8 Ω reduces wasted power in continuously connected products. PCB layout should prioritize short power paths, robust decoupling, acoustic output filtering, and effective exposed-pad heat spreading.

🏭

Industrial Control Panel Audio

The TAS5101IDAP can provide stereo announcement and alarm audio in industrial control panels operating across the documented -40°C to +85°C ambient range. Its two 15 W RMS Class-D channels can simplify left-right or dual-speaker arrangements while retaining greater-than-90% efficiency into an 8 Ω load. The industrial temperature rating makes it relevant to enclosed equipment, but thermal qualification must include worst-case ambient temperature, continuous output duration, and enclosure heat rise. Use the exposed-pad land pattern for heat conduction, and verify that switching-node layout and output filters meet the product's EMI requirements.

What is the Texas Instruments TAS5101IDAP?
The Texas Instruments TAS5101IDAP is a two-channel, 15 W-per-channel Class-D audio power amplifier with a PWM stereo output stage. The device operates from a 3 V to 3.6 V supply and is packaged in a 32-pin HTSSOP with an exposed pad. According to the manufacturer description, it is intended for efficient digital stereo audio amplification.
How much power can the TAS5101IDAP deliver?
The TAS5101IDAP can deliver 15 W RMS per channel into a 4 Ω load at 1 kHz. Its documented total harmonic distortion plus noise is 0.1% under that operating condition. Power capability depends on supply voltage, speaker impedance, thermal conditions, and the implemented output-filter and PCB layout, so those conditions should be checked together rather than treated independently.
What is the output efficiency of the TAS5101IDAP?
The TAS5101IDAP provides greater than 90% power efficiency when operating into an 8 Ω load. The manufacturer datasheet describes the device as a true digital stereo audio amplifier using a PWM stereo power output stage. This efficiency figure is especially useful when comparing thermal dissipation and battery consumption against a conventional Class-AB output stage.
What is the dynamic range of the TAS5101IDAP?
The TAS5101IDAP provides greater than 95 dB dynamic range in a typical digital audio amplifier system. This specification describes the signal-to-noise performance of the demonstrated system configuration and should not be confused with the 0.1% THD+N figure specified at 1 kHz and 15 W RMS into 4 Ω. System-level signal-chain gain also influences the measured result.
What package does the TAS5101IDAP use?
The TAS5101IDAP uses a 32-pin HTSSOP package with an exposed pad and gull-wing leads. The package is identified as approximately 6.10 mm wide with 0.240 in lead pitch. The exposed pad provides the primary thermal connection, so PCB copper and solder assembly should follow the manufacturer land-pattern requirements.
Where can I download the TAS5101IDAP datasheet PDF?
The TAS5101IDAP datasheet is available through the Texas Instruments product documentation and the linked datasheet index for this exact MPN. Use the manufacturer document for the authoritative pin descriptions, electrical characteristics, output-filter guidance, exposed-pad layout, and recommended application circuit. The datasheet index also links to a PDF copy suitable for offline engineering reference.
Where can I find the TAS5101IDAP pinout?
The TAS5101IDAP pin assignments are documented in the manufacturer datasheet under the pin-configuration and pin-description tables. The device uses a 32-pin HTSSOP package, including the exposed thermal pad as a separate connection defined by the package drawing. Use that table when assigning supply, ground, digital-audio, PWM-output, and thermal-pad PCB nets.
Is the TAS5101IDAP suitable for portable audio products?
The TAS5101IDAP is suitable for portable and connected-audio products that require stereo output from a 3 V to 3.6 V rail. Its greater-than-90% efficiency into an 8 Ω load reduces power loss compared with a linear amplifier. Battery life still depends on average playback level, channel loading, output filtering, thermal design, and the efficiency of the surrounding power supply.
TAS5101IDAP vs TAS5101DAPRG4 - which is the direct replacement?
TAS5101DAPRG4 is the closest documented same-family alternative to the TAS5101IDAP because it uses the same 32-pin HTSSOP exposed-pad format and is described as having consistent terminals and functional characteristics. The manufacturer packing suffix and orderable codes differ, so confirm the exact pin configuration, supply requirements, production status, and footprint against both datasheets before approving a substitution.
When should I choose the TAS5101IDAP instead of another stereo Class-D amplifier?
Choose the TAS5101IDAP when the design needs two 15 W RMS Class-D channels, a 3 V to 3.6 V supply, and a 32-pin HTSSOP exposed-pad implementation. It is particularly suitable when greater-than-90% efficiency into 8 Ω and 0.1% THD+N at 15 W RMS into 4 Ω are useful design targets. Select another amplifier when its voltage, thermal, filter, or control interface better matches the system.
What is the best drop-in replacement for the TAS5101IDAP?
TAS5101DAPRG4 is the best supported drop-in candidate identified for the TAS5101IDAP because it shares the 32-pin HTSSOP exposed-pad package and has consistent terminals and functional characteristics. It is not an exact identical orderable code, so qualification must include pin-level comparison, thermal verification, acoustic testing, and confirmation of the required operating range.
Can TAS5101DAPRG4 replace TAS5101IDAP without PCB changes?
TAS5101DAPRG4 can be considered for TAS5101IDAP replacement without obvious PCB changes because both use a 32-pin HTSSOP exposed-pad package and the comparison information describes consistent terminals. Final approval still requires reviewing each pin function, exposed-pad requirements, supply limits, thermal performance, and production ordering details in the manufacturer datasheets.
What is the best equivalent from another manufacturer for the TAS5101IDAP?
No cross-manufacturer drop-in equivalent can be established from the available technical records. Pin-compatible replacement requires a matching 32-pin HTSSOP exposed-pad land pattern, compatible 3 V to 3.6 V operation, comparable output-power capability, and compatible digital-audio and PWM-output interfaces. A cross-reference result alone is not sufficient to approve a different manufacturer's amplifier.
How should heat be removed from the TAS5101IDAP?
Heat should be removed through the exposed pad into a properly designed PCB copper area, with the package soldering and thermal via arrangement following the manufacturer land pattern. Thermal performance depends on board area, copper layers, adjacent heat sources, load duration, and ambient temperature. Evaluate the worst-case two-channel dissipation at the intended 15 W RMS operating point.
Where can I buy TAS5101IDAP and what is its lead time?
Use the Request a Quote form on this page to request current TAS5101IDAP availability, pricing, minimum order quantity, and lead time for the required quantity and packaging. Quote timing can vary with order volume, component availability, and production status, so confirm the commercial terms at the time of quotation rather than relying on a historical catalog value.
What are the key specifications of TAS5101IDAP that engineers should know?
The key TAS5101IDAP specifications are 15 W RMS per channel into 4 Ω, 0.1% THD+N at 1 kHz, greater-than-95-dB dynamic range, greater-than-90% efficiency into 8 Ω, a 3 V to 3.6 V supply range, and an industrial temperature range of -40°C to +85°C. It is a single-ended, two-channel Class-D amplifier in a 32-pin HTSSOP package with an exposed pad.

Data referensi kejuruteraan untuk TAS5101IDAP — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the TAS5101IDAP for a low-voltage stereo audio design that needs 15 W RMS per channel into 4 Ω from a 3 V to 3.6 V rail and uses a 32-pin HTSSOP exposed-pad footprint. Its documented >90% efficiency into 8 Ω, >95-dB dynamic range in a typical digital audio amplifier system, and 0.1% THD+N condition provide clear design targets. TAS5101DAPRG4 is the supported same-family candidate when its exact electrical data, production status, and orderable configuration meet the project requirements. No cross-manufacturer substitution is recommended without a complete pin, interface, thermal, and electrical comparison. Avoid selecting the target solely by package name: input format, speaker impedance, supply headroom, filter design, EMI limits, and enclosure thermal performance can determine whether the device is suitable.

Perbandingan dengan Gantian

Parametr Produk Ini TAS5101DAPRG4
Package 32-pin HTSSOP with exposed pad 32-pin HTSSOP with exposed pad
Brand Texas Instruments Texas Instruments
Product Type Stereo Class-D audio power amplifier Stereo audio amplifier
Channel Count 2 channels 2 channels
Output Power 15 W RMS per channel into 4 Ω 15 W

Penyeberangsung Jelas

  • Integrated dual-channel 15 W Class-D output stage (vsTAS5101DAPRG4)
  • Low-voltage supply compatibility (vsTAS5101DAPRG4)
  • Documented efficiency target (vsTAS5101DAPRG4)
  • Documented distortion performance (vsTAS5101DAPRG4)

Catatan Desain

Use the exposed pad as the primary thermal path and implement the manufacturer land pattern with adequate copper and thermal vias. Estimated: two channels at 15 W RMS into 4 Ω represent 30 W of delivered audio power before considering losses, but the actual amplifier dissipation depends on supply voltage, load, output filtering, and signal waveform. Validate the worst-case case with the intended PCB and enclosure rather than using output power alone as the heat estimate.

Keep the amplifier supply connections, decoupling capacitors, exposed pad, and output-filter components positioned according to the manufacturer reference layout. The PWM outputs can produce high-frequency electromagnetic activity, so route sensitive input and control traces away from switching-node copper. A compact ground-return path from the exposed pad to the supply-decoupling point helps reduce voltage excursions and radiated emissions.

Do not select the speaker interface from the device headline rating alone. Confirm the 3 V to 3.6 V supply range, allowed load impedance, output-filter topology, and whether the 15 W RMS figure applies per channel under the specified 4 Ω and 1 kHz condition. Also verify that the alternative device is an orderable, lifecycle-current part with matching exposed-pad and lead-pattern requirements.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The component is an industrial-temperature audio amplifier rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer product documentation or declaration.

Data disahkan pada: 2026-11-15 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

TAS5101IDAP datasheet TAS5101IDAP pinout TAS5101IDAP datasheet pdf TAS5101IDAP equivalent TAS5101IDAP replacement TAS5101IDAP cross reference TAS5101IDAP vs TAS5101DAPRG4 TAS5101IDAP price TAS5101IDAP stock Texas Instruments TAS5101IDAP TAS5101IDAP 15W Class-D amplifier TAS5101IDAP 32-pin HTSSOP TAS5101IDAP stereo audio application What can replace TAS5101IDAP? Is TAS5101IDAP suitable for portable audio?

Komponen dan Tanda berkaitan

Texas Instruments TAS5101IDAP TAS5101DAPRG4 Class-D amplifier stereo audio amplifier digital audio amplifier PWM power output stage audio amplifier IC power management semiconductor single-ended output THD+N dynamic range power efficiency speaker load 32-pin HTSSOP HTSSOP family surface mount exposed pad 3 V to 3.6 V supply -40°C to +85°C operating range industrial audio portable audio smart display audio Texas Instruments datasheet RoHS REACH
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ