TAS5101IDAP - 15W Stereo Class-D Amplifier | Texas Instruments
料号: TAS5101IDAP ✗ 停产TAS5101IDAP 概述
A Class-D audio amplifier is a switching power amplifier whose output transistors operate at high frequency. Compared with a linear audio amplifier, the switching architecture can deliver greater power efficiency, although filtering and electromagnetic compatibility remain important design considerations. The TAS5101IDAP belongs to the broader hierarchy of audio amplifier IC, power amplifier IC, and power management semiconductor, with its PWM output stage intended to drive stereo speaker networks.
Key performance characteristics include greater-than-95-dB dynamic range in a typical digital audio amplifier system, 0.1% THD+N at 1 kHz while delivering 15 W RMS into 4 Ω, and greater-than-90% power efficiency into an 8 Ω load. These specifications make the device suitable for applications where output power, conversion efficiency, and integrated stereo amplification must coexist within a compact surface-mount design.
The TAS5101 uses a true digital stereo audio architecture with a PWM power output stage. Its single-ended output arrangement and 3 V to 3.6 V supply operation suit low-voltage portable and connected-audio systems. The exposed-pad HTSSOP construction is intended for board-level heat dissipation, but correct land-pattern implementation and thermal management remain essential when operating near the 15 W per-channel performance point.
Typical uses include compact stereo speakers, portable audio equipment, smart displays, sound bars, multimedia systems, and other products needing two amplified audio channels. The 32-pin HTSSOP package supports surface-mount assembly, while the 3 V to 3.6 V supply range is particularly suitable for systems powered from regulated low-voltage rails.
Designers should follow the manufacturer datasheet for pin assignments, output filtering, supply decoupling, exposed-pad layout, and thermal calculations. Particularly in portable systems, verify speaker impedance, peak channel power, and simultaneous-load dissipation before selecting inductors, capacitors, copper area, and output filters.
This product page organizes the documented electrical characteristics, package details, application guidance, comparison information, and practical design considerations into a design-focused reference for engineers evaluating the TAS5101IDAP.
直接替换替代料: TAS5101IDAP ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
TAS5101DAPRG4
✅ 直接替换📋 参考替代料(不在目录中)
TAS5101IDAP 最大额定值与电气特性
| Product Type | Stereo Class-D audio power amplifier |
| Channel Count | 2 channels |
| 输出配置 | Single-ended stereo PWM output |
| Rated Output Power | 15 W RMS per channel into 4 Ω |
| THD+N | 0.1% at 1 kHz, 15 W RMS into 4 Ω |
| Dynamic Range | >95 dB in a typical digital audio amplifier system |
| Power Efficiency | >90% into an 8 Ω load |
| Supply Voltage Range | 3 V to 3.6 V |
| 工作温度范围 | -40°C to +85°C ambient |
| Temperature Grade | Industrial |
| 封装 | 32-pin HTSSOP with exposed pad |
| Package Body Width | 6.10 mm |
| Package Lead Pitch | 0.240 in |
| 安装类型 | Surface mount |
TAS5101IDAP 0.240 in 引脚配置指南
TAS5101IDAP(0.240 in 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: TAS5101IDAP.
请参阅 数据手册 以查看完整引脚配置。
典型应用
TAS5101IDAP 适用于 6 应用s: Compact Stereo Speaker, Portable Audio System, Smart Display Audio, Soundbar and Home Theater, Multimedia Speaker Dock, Industrial Control Panel Audio.
Compact Stereo Speaker
The TAS5101IDAP fits compact stereo speakers that need substantial output from a low-voltage 3 V to 3.6 V system rail. Its documented 15 W RMS per channel into 4 Ω capability and 0.1% THD+N at 1 kHz provide a useful target for clean playback in desktop speakers, bookshelf speakers, and compact multimedia systems. Greater-than-90% efficiency into an 8 Ω load also reduces heat in portable or space-constrained enclosures. The 32-pin HTSSOP exposed pad must be connected to an effective PCB thermal area, and output-filter components should follow the manufacturer reference design.
推荐
Portable Audio System
The TAS5101IDAP is appropriate for portable audio systems operating from a regulated 3 V to 3.6 V rail, including wireless speakers and connected portable products. Its greater-than-90% efficiency into an 8 Ω load improves the relationship between delivered audio power and battery consumption. The 15 W RMS per-channel rating into 4 Ω supports higher-power designs, while greater-than-95-dB dynamic range in a typical digital audio amplifier system preserves signal-to-noise margin. Designers should still model average playback power, peak thermal conditions, speaker impedance, and filter losses because those determine actual battery and enclosure performance.
推荐
Smart Display Audio
The TAS5101IDAP can support stereo audio in smart displays where a 3 V to 3.6 V system rail and two amplified channels are available. Its 0.1% THD+N at 1 kHz under a 15 W RMS into 4 Ω condition provides a useful starting point for minimizing distortion in a compact acoustic enclosure. The 32-pin exposed-pad HTSSOP package is practical for multilayer PCB construction, provided the thermal pad receives adequate copper and vias. Input-format compatibility, speaker loading, startup behavior, and EMI filtering should be validated together in the complete display design.
推荐
Soundbar and Home Theater
The TAS5101IDAP suits compact soundbar or home-theater auxiliaries requiring two channels of efficient Class-D output from a 3 V to 3.6 V rail. Its 15 W RMS per-channel capability into 4 Ω is appropriate for compact speakers, while greater-than-90% efficiency into 8 Ω helps control amplifier heat. The device's greater-than-95-dB dynamic range in a typical digital audio amplifier system supports clean signal reproduction from digital sources. Soundbar designs should account for simultaneous full-scale playback, output-filter component loss, enclosure heat accumulation, and the amplifier's exposed-pad thermal path.
推荐
Multimedia Speaker Dock
The TAS5101IDAP is a practical fit for docking speakers and multimedia systems that combine digital audio input with passive speakers. Its two-channel single-ended Class-D architecture removes the need for separate left and right output amplifiers, and the 3 V to 3.6 V operating range aligns with common low-voltage system rails. The specified 15 W RMS into 4 Ω condition offers enough power for compact desktop enclosures, while the >90% efficiency target into 8 Ω reduces wasted power in continuously connected products. PCB layout should prioritize short power paths, robust decoupling, acoustic output filtering, and effective exposed-pad heat spreading.
推荐
Industrial Control Panel Audio
The TAS5101IDAP can provide stereo announcement and alarm audio in industrial control panels operating across the documented -40°C to +85°C ambient range. Its two 15 W RMS Class-D channels can simplify left-right or dual-speaker arrangements while retaining greater-than-90% efficiency into an 8 Ω load. The industrial temperature rating makes it relevant to enclosed equipment, but thermal qualification must include worst-case ambient temperature, continuous output duration, and enclosure heat rise. Use the exposed-pad land pattern for heat conduction, and verify that switching-node layout and output filters meet the product's EMI requirements.
推荐
工程参考数据: TAS5101IDAP ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | TAS5101DAPRG4 |
|---|---|---|
| Package | 32-pin HTSSOP with exposed pad | 32-pin HTSSOP with exposed pad |
| Brand | Texas Instruments | Texas Instruments |
| Product Type | Stereo Class-D audio power amplifier | Stereo audio amplifier |
| Channel Count | 2 channels | 2 channels |
| Output Power | 15 W RMS per channel into 4 Ω | 15 W |
关键差异点
- Integrated dual-channel 15 W Class-D output stage (对比 TAS5101DAPRG4)
- Low-voltage supply compatibility (对比 TAS5101DAPRG4)
- Documented efficiency target (对比 TAS5101DAPRG4)
- Documented distortion performance (对比 TAS5101DAPRG4)
设计说明
Use the exposed pad as the primary thermal path and implement the manufacturer land pattern with adequate copper and thermal vias. Estimated: two channels at 15 W RMS into 4 Ω represent 30 W of delivered audio power before considering losses, but the actual amplifier dissipation depends on supply voltage, load, output filtering, and signal waveform. Validate the worst-case case with the intended PCB and enclosure rather than using output power alone as the heat estimate.
Keep the amplifier supply connections, decoupling capacitors, exposed pad, and output-filter components positioned according to the manufacturer reference layout. The PWM outputs can produce high-frequency electromagnetic activity, so route sensitive input and control traces away from switching-node copper. A compact ground-return path from the exposed pad to the supply-decoupling point helps reduce voltage excursions and radiated emissions.
Do not select the speaker interface from the device headline rating alone. Confirm the 3 V to 3.6 V supply range, allowed load impedance, output-filter topology, and whether the 15 W RMS figure applies per channel under the specified 4 Ω and 1 kHz condition. Also verify that the alternative device is an orderable, lifecycle-current part with matching exposed-pad and lead-pattern requirements.
合规信息
The component is an industrial-temperature audio amplifier rather than an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer product documentation or declaration.