TAS5624ADDV - 150W Stereo Class-D Power Stage | Texas Instruments
MPN: TAS5624ADDV ✓ AktifTAS5624ADDV Ringkasan
A Class-D audio amplifier is a switching power stage that converts a PWM command signal into a filtered bridge-tied-bias speaker output. The TAS5624ADDV belongs to the PurePath HD family of high-performance audio power stages. Its architecture combines high-efficiency output switching, integrated thermal enhancement, and a thermally enhanced package to support demanding loudspeaker drive levels in compact equipment.
The primary operating ratings are a 12 V to 38 V supply range, up to 150 W stereo output, and up to 400 W mono output. The device accepts PWM input rather than analog line-level audio, allowing it to operate downstream of a digital audio processor or PWM modulator. Its 44-pin HTSSOP construction supports dense PCB layouts while providing a substantial exposed thermal pad for heat transfer.
The TAS5624A family is described by Texas Instruments as a thermally enhanced version of the TAS5614A architecture, using larger MOSFETs and a revised gate-drive approach to improve efficiency and reduce losses. Because the output is a switching power stage, filter and thermal design remain as important as signal routing. The manufacturer’s reference schematics and PCB layouts provide a practical starting point for power-stage routing, bypassing, and exposed-pad thermal implementation.
Typical applications include powered stereo speakers, home-theater amplifiers, professional active-monitor speakers, and compact high-output audio systems. In a multi-channel design, the PWM input can originate from a dedicated audio processor, while the power stage handles current amplification and speaker drive. Filter selection must preserve the intended audio bandwidth while suppressing the carrier waveform and associated switching harmonics.
The most important layout consideration is the relationship between the exposed pad, power-ground structure, output networks, and heat-spreading copper. Place input, supply, and output-capacitor connections according to the manufacturer reference layout, minimize high-current loop area, and provide copper area around the package rather than relying only on signal-trace geometry. Thermal performance depends on the PCB copper area, via pattern, enclosure airflow, and sustained output level.
This product record combines the manufacturer’s power and package ratings with practical guidance for implementation. It also distinguishes same-footprint family options from parts whose output ratings or electrical functions differ, helping engineers assess replacement suitability without confusing package similarity with guaranteed drop-in equivalence.
Pilihan pengganti yang segera untuk TAS5624ADDV — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera TAS5624ADDV (sama faktor bentuk dan kaki) — berbeza dalam Mono Output Power, Output Topology, Stereo Output Power, Supply Voltage Range, Thermal Enhancement.
TAS5624ADDVR
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
TAS5614LADDV
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
TAS5622ADDV
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →TAS5624ADDV Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | Class-D audio power amplifier |
| Amplifier Configuration | 1-channel mono or 2-channel stereo |
| Stereo Output Power | 150 W |
| Mono Output Power | 400 W |
| Supply Voltage Range | 12 V to 38 V |
| Input Signal Type | PWM input |
| Technology Family | PurePath HD |
| Output Topology | Bridge-tied bias |
| Package Type | 44-pin HTSSOP with exposed pad |
| Package Pin Count | 44 pins |
| Jenis Pemasangan | Surface mount |
| Lead Form | Gull wing |
| Temperature Grade | Commercial |
| Thermal Enhancement | Thermally enhanced |
| Output Device | Large MOSFET power stage |
| Gate Drive | Novel gate-drive scheme |
Panduan Konfigurasi Pin TAS5624ADDV 44 pins
Konfigurasi pin untuk TAS5624ADDV (44 pins pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.
Tiada data garisan pin yang diperoleh untuk TAS5624ADDV.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
TAS5624ADDV patut untuk 6 aplikasis: Powered Stereo Speaker, Home-Theater Power Amplifier, Professional Active Monitor, Multi-Channel Audio Amplifier, Digital Audio Speaker Power Stage, Compact High-Power Audio Amplifier.
Powered Stereo Speaker
The TAS5624ADDV fits a high-output powered-speaker design requiring a PWM drive stage rather than an analog-input amplifier. Its stated capability of 150 W in stereo bridge-tied-bias mode allows each channel to drive a passive loudspeaker from a shared Class-D architecture. A suitable upstream PWM processor can handle decoding, volume, and channel routing. The design must provide 12 V to 38 V supply rails, speaker filters, output-network protection, and a PCB thermal structure that uses the exposed pad effectively.
Disebarkan
Home-Theater Power Amplifier
A home-theater power amplifier can use the TAS5624ADDV as a high-current Class-D output stage behind a digital audio processor. The 400 W mono capability is relevant to demanding loudspeaker loads, while the 150 W stereo rating supports conventional left and right speaker channels. The part accepts PWM commands directly, which can simplify the signal path between the processor and power stage. Care is required in choosing the LC output filters and grounding the high-current outputs according to the reference layout.
Disebarkan
Professional Active Monitor
The TAS5624ADDV can serve as the power stage in an active studio monitor when the system uses a digital signal chain and requires high output power in a compact amplifier enclosure. Its PWM input supports direct connection to a compatible audio processor, while the exposed thermal pad assists heat transfer into the amplifier chassis. Thermal performance still depends on sustained monitoring level, enclosure airflow, copper area, and speaker impedance. The 12 V to 38 V supply range must be reconciled with the required clean headroom.
Disebarkan
Multi-Channel Audio Amplifier
The TAS5624ADDV is suitable for a multi-channel amplifier architecture that uses repeated power stages driven from a central PWM audio processor. Its stereo and mono operating modes allow designers to allocate channels according to speaker topology while retaining a common Class-D output architecture. The key engineering constraints are synchronized PWM routing, independent output filters, channel-specific gain settings, and adequate supply decoupling. A multi-channel board also requires careful partitioning of sensitive signal paths from high-current switching outputs to minimize unwanted coupling.
Disebarkan
Digital Audio Speaker Power Stage
In a digital speaker architecture, the TAS5624ADDV can perform the final PWM-to-current power conversion after upstream decoding and processing. Its 150 W stereo rating makes it appropriate for high-output digital speakers, provided the speaker impedance, amplifier voltage, and PWM modulation remain within the device specifications. The 44-pin HTSSOP exposed pad is central to managing switching-stage losses, so the implementation should follow the manufacturer reference PCB rather than use a generic thermal-via arrangement.
Disebarkan
Compact High-Power Audio Amplifier
The TAS5624ADDV fits compact high-power amplifiers where Class-D efficiency and integration are more important than a simple analog-output device. Its thermally enhanced 44-pin HTSSOP package concentrates the power stage into a small footprint while retaining 150 W stereo capability under the manufacturer’s specified conditions. The enclosure should provide a deliberate thermal path from the exposed pad through PCB copper to chassis or heat-spreading surfaces. Output transformers are not required for the digital command path, but passive speaker filters and protection remain essential.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk TAS5624ADDV — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | TAS5624ADDVR | TAS5614LADDV | TAS5622ADDV |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 44-pin HTSSOP with exposed pad | 44-pin HTSSOP with exposed pad | 44-pin HTSSOP with exposed pad | 44-pin HTSSOP with exposed pad |
Penyeberangsung Jelas
- Higher stated mono output power (vsTAS5622ADDV)
- Thermally enhanced power-stage architecture (vsTAS5614LADDV)
- Exact electrical-equivalent packing option (vsTAS5624ADDVR)
Catatan Desain
Treat the exposed pad as the primary thermal path rather than as an optional copper feature. Implement the manufacturer reference PCB with a continuous ground-and-thermal copper region, a dense via array, and the specified output and supply layout. Validate the hottest expected operating condition because the 150 W stereo and 400 W mono ratings are conditional on thermal conditions, speaker impedance, supply voltage, and signal level.
Separate PWM inputs and control signals from high-current speaker outputs and power-supply nodes. Keep the PWM traces short and controlled, place the required bypass capacitors close to their associated pins, and route high-current output loops with minimal area. Do not improvise the exposed-pad via pattern or output-filter placement because these details affect switching behavior, EMI, and thermal performance.
Confirm that the 12 V to 38 V supply requirement includes adequate transient margin for the selected operating point and load. The amplifier is a switching power stage, so supply impedance and decoupling affect both output integrity and device stress. Use the manufacturer output-filter and power-supply recommendations, and include appropriate speaker protection against startup transients and abnormal load conditions.
Do not substitute a same-package amplifier solely because the land pattern appears identical. A valid replacement also requires matching pin functions, PWM polarity and timing expectations, supply limits, output power, thermal limits, output-network requirements, and exposed-pad construction. In particular, distinguish TAS5624ADDV from TAS5624ADDVR by delivery packing rather than treating the reel variant as a different electrical design.
Maklumat Kesediaan
The product is identified as a commercial-grade component, but no explicit RoHS, REACH, halogen-free, conflict-minerals, or automotive-qualification declaration was established. AEC-Q100 is recorded as not applicable because the part is not identified as an automotive-qualified variant.