Texas Instruments

TAS5624ADDV - 150W Stereo Class-D Power Stage | Texas Instruments

MPN: TAS5624ADDV ✓ Hoạt động
12 V to 38 V Vdss 44-pin HTSSOP with exposed pad Package
MOQ: 1 |

TAS5624ADDV Tóm tắt

The Texas Instruments TAS5624ADDV is a 150 W stereo, 400 W mono, PWM-input Class-D audio power-stage IC built around a thermally enhanced 44-pin HTSSOP package with an exposed pad. Its 12 V to 38 V operating range, digital PWM input architecture, and high output-power capability position it as the final amplification stage in multi-channel home-theater, powered-speaker, and professional audio systems.

A Class-D audio amplifier is a switching power stage that converts a PWM command signal into a filtered bridge-tied-bias speaker output. The TAS5624ADDV belongs to the PurePath HD family of high-performance audio power stages. Its architecture combines high-efficiency output switching, integrated thermal enhancement, and a thermally enhanced package to support demanding loudspeaker drive levels in compact equipment.

The primary operating ratings are a 12 V to 38 V supply range, up to 150 W stereo output, and up to 400 W mono output. The device accepts PWM input rather than analog line-level audio, allowing it to operate downstream of a digital audio processor or PWM modulator. Its 44-pin HTSSOP construction supports dense PCB layouts while providing a substantial exposed thermal pad for heat transfer.

The TAS5624A family is described by Texas Instruments as a thermally enhanced version of the TAS5614A architecture, using larger MOSFETs and a revised gate-drive approach to improve efficiency and reduce losses. Because the output is a switching power stage, filter and thermal design remain as important as signal routing. The manufacturer’s reference schematics and PCB layouts provide a practical starting point for power-stage routing, bypassing, and exposed-pad thermal implementation.

Typical applications include powered stereo speakers, home-theater amplifiers, professional active-monitor speakers, and compact high-output audio systems. In a multi-channel design, the PWM input can originate from a dedicated audio processor, while the power stage handles current amplification and speaker drive. Filter selection must preserve the intended audio bandwidth while suppressing the carrier waveform and associated switching harmonics.

The most important layout consideration is the relationship between the exposed pad, power-ground structure, output networks, and heat-spreading copper. Place input, supply, and output-capacitor connections according to the manufacturer reference layout, minimize high-current loop area, and provide copper area around the package rather than relying only on signal-trace geometry. Thermal performance depends on the PCB copper area, via pattern, enclosure airflow, and sustained output level.

This product record combines the manufacturer’s power and package ratings with practical guidance for implementation. It also distinguishes same-footprint family options from parts whose output ratings or electrical functions differ, helping engineers assess replacement suitability without confusing package similarity with guaranteed drop-in equivalence.

Bộ thay thế dễ dàng lắp đặt cho TAS5624ADDV — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với TAS5624ADDV (cùng hình factor và footprint) — khác nhau ở Mono Output Power, Output Topology, Stereo Output Power, Supply Voltage Range, Thermal Enhancement.

Texas Instruments
Mono Output Power: 250 W
Output Topology: Class-D
Stereo Output Power: 125 W
So sánh với TAS5624ADDV →

TAS5624ADDVR

✅ Drop-In
📦 44-pin HTSSOP with exposed pad
Identical electrical device and 44-pin HTSSOP footprint; delivery packing changes from ADDV to ADDVR, with output capability unchanged at 150 W stereo and 400 W mono

📋 Tham chiếu thay thế (không có trong danh mục)

TAS5614LADDV

✅ Drop-In
📦 44-pin HTSSOP with exposed pad
Uses the same 44-pin HTSSOP footprint and a similar high-power Class-D role, but the power stage and detailed electrical limits differ from the thermally enhanced TAS5624A architecture

📋 Tham chiếu thay thế (không có trong danh mục)

TAS5622ADDV

✅ Drop-In
Texas Instruments
📦 44-pin HTSSOP with exposed pad
Class-D audio power amplifier · 125 W · 250 W · 12 V to 34 V · PWM input · 1-channel mono or 2-channel stereo · Class-D · PurePath HD

Liên hệ để biết giá

Xem tài liệu →

TAS5624ADDV Tỷ lệ tối đa & tính chất điện

Product Type Class-D audio power amplifier
Amplifier Configuration 1-channel mono or 2-channel stereo
Stereo Output Power 150 W
Mono Output Power 400 W
Supply Voltage Range 12 V to 38 V
Input Signal Type PWM input
Technology Family PurePath HD
Output Topology Bridge-tied bias
Package Type 44-pin HTSSOP with exposed pad
Package Pin Count 44 pins
Kiểu lắp đặt Surface mount
Lead Form Gull wing
Temperature Grade Commercial
Thermal Enhancement Thermally enhanced
Output Device Large MOSFET power stage
Gate Drive Novel gate-drive scheme

Hướng dẫn cấu hình chân TAS5624ADDV 44 pins

Cấu hình chân cho TAS5624ADDV (44 pins gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 44 pins cho TAS5624ADDV

Không có dữ liệu chân cụ thể sẵn có cho TAS5624ADDV.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

TAS5624ADDV phù hợp cho 6 Áp dụngs: Powered Stereo Speaker, Home-Theater Power Amplifier, Professional Active Monitor, Multi-Channel Audio Amplifier, Digital Audio Speaker Power Stage, Compact High-Power Audio Amplifier.

🎧

Powered Stereo Speaker

The TAS5624ADDV fits a high-output powered-speaker design requiring a PWM drive stage rather than an analog-input amplifier. Its stated capability of 150 W in stereo bridge-tied-bias mode allows each channel to drive a passive loudspeaker from a shared Class-D architecture. A suitable upstream PWM processor can handle decoding, volume, and channel routing. The design must provide 12 V to 38 V supply rails, speaker filters, output-network protection, and a PCB thermal structure that uses the exposed pad effectively.

📺

Home-Theater Power Amplifier

A home-theater power amplifier can use the TAS5624ADDV as a high-current Class-D output stage behind a digital audio processor. The 400 W mono capability is relevant to demanding loudspeaker loads, while the 150 W stereo rating supports conventional left and right speaker channels. The part accepts PWM commands directly, which can simplify the signal path between the processor and power stage. Care is required in choosing the LC output filters and grounding the high-current outputs according to the reference layout.

🎚️

Professional Active Monitor

The TAS5624ADDV can serve as the power stage in an active studio monitor when the system uses a digital signal chain and requires high output power in a compact amplifier enclosure. Its PWM input supports direct connection to a compatible audio processor, while the exposed thermal pad assists heat transfer into the amplifier chassis. Thermal performance still depends on sustained monitoring level, enclosure airflow, copper area, and speaker impedance. The 12 V to 38 V supply range must be reconciled with the required clean headroom.

🏭

Multi-Channel Audio Amplifier

The TAS5624ADDV is suitable for a multi-channel amplifier architecture that uses repeated power stages driven from a central PWM audio processor. Its stereo and mono operating modes allow designers to allocate channels according to speaker topology while retaining a common Class-D output architecture. The key engineering constraints are synchronized PWM routing, independent output filters, channel-specific gain settings, and adequate supply decoupling. A multi-channel board also requires careful partitioning of sensitive signal paths from high-current switching outputs to minimize unwanted coupling.

🔊

Digital Audio Speaker Power Stage

In a digital speaker architecture, the TAS5624ADDV can perform the final PWM-to-current power conversion after upstream decoding and processing. Its 150 W stereo rating makes it appropriate for high-output digital speakers, provided the speaker impedance, amplifier voltage, and PWM modulation remain within the device specifications. The 44-pin HTSSOP exposed pad is central to managing switching-stage losses, so the implementation should follow the manufacturer reference PCB rather than use a generic thermal-via arrangement.

⚡

Compact High-Power Audio Amplifier

The TAS5624ADDV fits compact high-power amplifiers where Class-D efficiency and integration are more important than a simple analog-output device. Its thermally enhanced 44-pin HTSSOP package concentrates the power stage into a small footprint while retaining 150 W stereo capability under the manufacturer’s specified conditions. The enclosure should provide a deliberate thermal path from the exposed pad through PCB copper to chassis or heat-spreading surfaces. Output transformers are not required for the digital command path, but passive speaker filters and protection remain essential.

What is the TAS5624ADDV?
The TAS5624ADDV is a Texas Instruments PWM-input Class-D audio power-stage IC rated for 150 W stereo output and 400 W mono output. It operates from 12 V to 38 V and is packaged in a thermally enhanced 44-pin HTSSOP with an exposed pad. According to the manufacturer product page and datasheet, it is intended for high-output audio systems requiring efficient digital-input power amplification.
What is the output power of TAS5624ADDV?
The TAS5624ADDV supports up to 150 W in stereo bridge-tied-bias operation and up to 400 W in mono operation. These are the principal power ratings stated by Texas Instruments for the TAS5624A family. Actual continuous output depends on supply voltage, speaker impedance, cooling, PCB thermal design, signal conditions, and the output-filter configuration.
What supply voltage does TAS5624ADDV require?
The TAS5624ADDV operates from 12 V to 38 V. According to the Texas Instruments TAS5624A product page, this range supports high-power Class-D speaker drive while remaining below the device’s absolute maximum limits. A designer should retain adequate decoupling and ensure that the selected supply voltage, output power, and thermal conditions all remain within the datasheet operating area.
Where can I download the TAS5624ADDV datasheet PDF?
The official TAS5624ADDV datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/tas5624a.pdf. The manufacturer datasheet contains the electrical characteristics, pin descriptions, application information, output-filter guidance, thermal information, and reference layouts. Use the pin-description table when assigning PCB tracks and verify all values against the latest manufacturer document before releasing a production design.
Where is the TAS5624ADDV pinout?
The TAS5624ADDV pinout is shown in the pin-configuration and pin-description sections of the Texas Instruments TAS5624A datasheet. The device uses a 44-pin HTSSOP with an exposed thermal pad, and the exposed pad is a PCB land pattern requirement rather than a normal numbered signal pin. Assign every supply, PWM input, ground, and output connection from the manufacturer table.
Can TAS5614LADDV replace TAS5624ADDV?
TAS5614LADDV is a same-brand, same-package candidate that can be considered for a redesign, but it is not automatically guaranteed as a drop-in replacement. The cross-reference material identifies the shared HTSSOP-44 format and similar power class, while the target and source devices still require comparison of pin functions, electrical limits, thermal conditions, PWM requirements, and recommended output networks before substitution.
TAS5624ADDV vs TAS5622ADDV — which is better for a high-power speaker?
Choose the TAS5624ADDV when the design specifically targets its 150 W stereo and 400 W mono ratings. TAS5622ADDV may be useful as a lower-power family alternative, but its output limits, thermal performance, and detailed electrical characteristics must be checked against the intended speaker impedance and supply. Package similarity alone does not establish identical output capability or guaranteed drop-in status.
When should I choose TAS5624ADDV over TAS5614LADDV?
Choose TAS5624ADDV when the design is based on the thermally enhanced TAS5624A architecture and its stated 150 W stereo or 400 W mono capability. Consider TAS5614LADDV when a lower-complexity same-package alternative meets the required output power and its complete pin and electrical specification aligns with the PCB. A PCB respin should be assumed unless the manufacturer data proves the relevant functions and limits match.
What is the best drop-in replacement for TAS5624ADDV?
No fully verified drop-in replacement is established by the available cross-reference information. TAS5614LADDV and TAS5622ADDV use the same 44-pin HTSSOP family format and are useful engineering candidates, but exact pin compatibility, electrical limits, thermal performance, and output-filter requirements still require verification. Treat them as redesign candidates rather than guaranteed substitutions.
Is TAS5624ADDV suitable for home-theater and powered-speaker systems?
Yes, the TAS5624ADDV is suitable for home-theater and powered-speaker power stages when its 12 V to 38 V supply range and 150 W stereo rating satisfy the system requirements. Its PWM input makes it appropriate downstream of a digital audio processor. Speaker impedance, amplifier filtering, PCB cooling, and sustained thermal conditions must be evaluated for every channel.
Does TAS5624ADDV require an external digital audio processor?
The TAS5624ADDV accepts a PWM command signal and therefore requires a PWM source upstream for normal operation. A digital audio processor or dedicated PWM modulator can provide that signal and handle volume, channel mapping, delay, and system control. The device performs the high-current power-amplification stage rather than decoding a digital audio stream itself.
How much thermal management does TAS5624ADDV need?
The TAS5624ADDV needs a thermal design matched to its sustained output power because the 44-pin HTSSOP exposes a large thermal pad. Texas Instruments states that the TAS5624A is a thermally enhanced Class-D stage, but package construction alone does not determine junction temperature. Use the exposed pad, via array, copper area, airflow, and enclosure design specified by the manufacturer reference layout.
What is the TAS5624ADDV packaging format?
The TAS5624ADDV is offered in a surface-mount 44-pin HTSSOP construction with gull-wing leads and an exposed thermal pad. The exposed pad must be connected to the PCB thermal and ground structure shown in the manufacturer layout. Use the package information in the datasheet for land pattern dimensions, solder-mask details, and the exposed-pad footprint.
Is TAS5624ADDV RoHS compliant and automotive qualified?
The TAS5624ADDV is a commercial-grade audio power stage, but its exact RoHS, REACH, halogen-free, and conflict-minerals declarations must be confirmed from the manufacturer orderable-part information. The product is not identified as an AEC-Q100 automotive-qualified variant in the available manufacturer description. Do not infer automotive suitability from its high-power audio capability.
Where to buy TAS5624ADDV and what is its price?
Use the Request a Quote form on this page to request TAS5624ADDV pricing, current stock, minimum order quantity, and lead time. The form routes the request to XAIPART without requiring a static price that may quickly become obsolete. Confirm the exact ADDV orderable suffix, 44-pin HTSSOP package, and tube or reel delivery requirements when submitting the request.
What are the key specifications of TAS5624ADDV that engineers should know?
The key TAS5624ADDV specifications are 150 W stereo output, 400 W mono output, a 12 V to 38 V supply range, PWM input, and a 44-pin HTSSOP package with an exposed pad. Texas Instruments describes the TAS5624A as a thermally enhanced PurePath HD Class-D power stage. The architecture uses large MOSFETs and a revised gate-drive scheme to improve efficiency and reduce losses.
What is the best Texas Instruments equivalent for TAS5624ADDV?
TAS5614LADDV is the closest same-brand family candidate identified for the TAS5624ADDV because it shares the HTSSOP-44 format and a similar high-power audio role. It should not be treated as an automatic drop-in replacement: verify every pin, the maximum and minimum supply limits, PWM logic, thermal limits, output-filter network, and power ratings before approving a substitution.

Dữ liệu tham khảo kỹ thuật cho TAS5624ADDV — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose TAS5624ADDV when the design requires a PWM-input Class-D stage with up to 150 W stereo or 400 W mono output, a 12 V to 38 V supply range, and a thermally enhanced 44-pin HTSSOP implementation. Select TAS5624ADDVR when the same electrical device is needed in the alternative delivery format represented by that orderable suffix. Consider TAS5614LADDV when its lower-complexity power-stage architecture meets the output, thermal, and electrical requirements, but verify pin functions and limits before treating it as a drop-in choice. Consider TAS5622ADDV only after confirming that its output rating and PWM interface satisfy the system requirement. For any substitution, compare the manufacturer datasheets, pin descriptions, output filters, supply limits, thermal data, and exposed-pad layout rather than relying on package appearance alone.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này TAS5624ADDVR TAS5614LADDV TAS5622ADDV
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 44-pin HTSSOP with exposed pad 44-pin HTSSOP with exposed pad 44-pin HTSSOP with exposed pad 44-pin HTSSOP with exposed pad

Bảo phân biệt quan trọng

  • Higher stated mono output power (vsTAS5622ADDV)
  • Thermally enhanced power-stage architecture (vsTAS5614LADDV)
  • Exact electrical-equivalent packing option (vsTAS5624ADDVR)

Ghi chú thiết kế

Treat the exposed pad as the primary thermal path rather than as an optional copper feature. Implement the manufacturer reference PCB with a continuous ground-and-thermal copper region, a dense via array, and the specified output and supply layout. Validate the hottest expected operating condition because the 150 W stereo and 400 W mono ratings are conditional on thermal conditions, speaker impedance, supply voltage, and signal level.

Separate PWM inputs and control signals from high-current speaker outputs and power-supply nodes. Keep the PWM traces short and controlled, place the required bypass capacitors close to their associated pins, and route high-current output loops with minimal area. Do not improvise the exposed-pad via pattern or output-filter placement because these details affect switching behavior, EMI, and thermal performance.

Confirm that the 12 V to 38 V supply requirement includes adequate transient margin for the selected operating point and load. The amplifier is a switching power stage, so supply impedance and decoupling affect both output integrity and device stress. Use the manufacturer output-filter and power-supply recommendations, and include appropriate speaker protection against startup transients and abnormal load conditions.

Do not substitute a same-package amplifier solely because the land pattern appears identical. A valid replacement also requires matching pin functions, PWM polarity and timing expectations, supply limits, output power, thermal limits, output-network requirements, and exposed-pad construction. In particular, distinguish TAS5624ADDV from TAS5624ADDVR by delivery packing rather than treating the reel variant as a different electrical design.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The product is identified as a commercial-grade component, but no explicit RoHS, REACH, halogen-free, conflict-minerals, or automotive-qualification declaration was established. AEC-Q100 is recorded as not applicable because the part is not identified as an automotive-qualified variant.

Dữ liệu được xác minh vào: 2026-11-20 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

TAS5624ADDV datasheet TAS5624ADDV pinout TAS5624ADDV datasheet pdf TAS5624ADDV equivalent TAS5624ADDV replacement TAS5624ADDV HTSSOP-44 Texas Instruments TAS5624ADDV TAS5624ADDV vs TAS5614LADDV TAS5624ADDV vs TAS5622ADDV TAS5624ADDV 150W stereo TAS5624ADDV 400W mono TAS5624ADDV price TAS5624ADDV stock TAS5624A PWM input amplifier TAS5624ADDV powered speaker application

Các bộ phận và thuật ngữ liên quan

Texas Instruments TAS5624ADDV TAS5624A TAS5624ADDVR TAS5614LADDV TAS5622ADDV TAS5614A Class-D amplifier digital audio power amplifier PWM input PurePath HD bridge-tied bias power MOSFET audio power stage 150 W stereo output 400 W mono output 12 V to 38 V power supply HTSSOP-44 QFN family surface mount exposed pad thermal enhancement speaker output filter home theater amplifier powered stereo speaker
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ