Texas Instruments

TAS5631PHD - 300W Stereo Class-D Amplifier | Texas Instruments

MPN: TAS5631PHD ✓ Aktif
50 V Vdss 64-pin HTQFP, 14 mm x 14 mm Package
MOQ: 1 |

TAS5631PHD Ringkasan

Texas Instruments TAS5631PHD is a PWM-input Class-D audio power amplifier with integrated closed-loop feedback, rated for up to 300 W stereo output into 4 Ω to 8 Ω speakers from a single 50 V supply. It supports mono or stereo operation and is housed in a 64-pin HTQFP package measuring 14 mm by 14 mm. The device uses PurePath HD feedback technology to combine Class-D efficiency with low total harmonic distortion.

A Class-D audio amplifier is a switching power stage in which the output transistor conducts only part of each signal cycle. This architecture belongs to the amplifier-IC hierarchy, where a Class-D amplifier converts a PWM command signal into a high-current speaker output. Compared with a conventional linear Class-AB output stage, the TAS5631PHD reduces power dissipation when driving high-power loudspeakers, while its integrated feedback is intended to preserve low distortion under real load conditions.

The principal features of the TAS5631PHD are its 300 W stereo capability, support for 4 Ω to 8 Ω speaker loads, 50 V supply operation, differential or single-ended input operation, and integrated PurePath HD feedback. The manufacturer states that PurePath HD can achieve total harmonic distortion below 0.03% while retaining the efficiency benefits of Class-D operation. These characteristics make the device suitable for high-power stereo audio, active speakers, home-theater amplification, professional audio systems, and powered subwoovers when the application can use a 50 V amplifier supply.

TAS5631PHD receives a PWM command signal rather than an analog audio waveform. A system-level audio processor must therefore generate the required PWM format before the amplifier drives the loudspeakers. The integrated feedback network provides closed-loop output control, but the external power stage, supply network, output filtering, speaker connections, thermal management, and protection implementation still require careful engineering for a reliable 300 W design.

Typical deployments include powered stereo speakers, multimedia speaker systems, active subwoofers, home-theater power amplifiers, and commercial audio installations. The 300 W rating describes the maximum stereo capability under specified test conditions, not a guarantee that every speaker, enclosure, supply, board layout, or thermal design can safely sustain that output. Impedance, channel configuration, thermal limits, supply capability, and signal-processing requirements determine the practical operating envelope.

Designers should follow the manufacturer datasheet for pin assignments, bootstrap-capacitor values, input filtering, output filtering, power-supply layout, and thermal implementation. The exposed thermal pad must be connected to the recommended thermal plane, and the high-current output paths require very low-inductance routing. This page combines the confirmed device characteristics, application guidance, and substitution constraints into an engineering-focused overview of the TAS5631PHD.

Pilihan pengganti yang segera untuk TAS5631PHD — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

TAS5631BPHD

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 64-pin HTQFP (14 mm x 14 mm)
Related TAS5631B 300 W stereo PWM-input Class-D device in the same 64-pin HTQFP family; automotive qualification details must be verified, while the core 300 W stereo and 50 V ratings align.

📋 Alternatif rujukan (tidak dalam katalog)

TAS5631PHD Penilaian maksimum & Ciri-ciri Elektrik

Device Type PWM-input Class-D audio power amplifier
Channel Configuration 1-channel mono or 2-channel stereo
Maximum Stereo Output Power 300 W
Stereo Speaker Impedance 4 Ω to 8 Ω
Maximum Mono Output Power 600 W
Power Supply Voltage 50 V
Feedback Architecture Integrated closed-loop PurePath HD feedback
Total Harmonic Distortion Less than 0.03%
Input Signal PWM input
Input Mode Differential or single-ended
Konfigurasi Output Differential or single-ended
Kemasan 64-pin HTQFP, 14 mm x 14 mm
Jenis Pemasangan Surface mount
Thermal Pad Exposed pad

Panduan Konfigurasi Pin TAS5631PHD 64-pin htqfp, 14 mm x 14 mm

Konfigurasi pin untuk TAS5631PHD (64-pin htqfp, 14 mm x 14 mm pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai 64-pin htqfp, 14 mm x 14 mm untuk TAS5631PHD

Tiada data garisan pin yang diperoleh untuk TAS5631PHD.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

TAS5631PHD patut untuk 6 aplikasis: High-Power Active Stereo Speakers, Home-Theater Power Amplifier, Active Subwoofer Amplifier, Digital Audio Speaker System, Professional Audio Power Module, Multi-Way Loudspeaker Power Stage.

🔊

High-Power Active Stereo Speakers

The TAS5631PHD fits active stereo speakers that require up to 300 W per channel from a single 50 V amplifier supply. Its integrated PurePath HD feedback supports operation with 4 Ω to 8 Ω loads, while the stated total harmonic distortion of less than 0.03% targets high-fidelity playback. In this architecture, a digital audio processor produces the required PWM command signal, and the TAS5631PHD converts it into a high-current speaker output. The implementation should preserve the manufacturer-recommended bootstrap and output-filter networks. It must also provide a low-impedance supply path and a substantial exposed-pad thermal plane so that output capability is not limited by board heating.

🏠

Home-Theater Power Amplifier

The TAS5631PHD is suitable for a dedicated stereo home-theater power stage because it supports 300 W stereo output into 4 Ω to 8 Ω speakers from one 50 V rail. Its PWM interface favors systems that already include a digital audio processor, and integrated PurePath HD feedback is intended to reduce distortion while loudspeaker impedance varies. The amplifier board should separate sensitive PWM timing routes from switching outputs and use very low-inductance supply and speaker connections. A thermal design suitable for sustained cinematic playback is essential, because advertised amplifier power does not by itself establish safe continuous dissipation in a compact enclosure.

🔊

Active Subwoofer Amplifier

The TAS5631PHD can serve as the power stage in an active subwoofer or multiway speaker where a 600 W mono capability and 4 Ω to 8 Ω load range are useful. Its integrated closed-loop feedback supports accurate control during changing loudspeaker loads, while the Class-D topology is favorable for a power amplifier that must deliver high output with reduced conduction loss. The exact channel configuration must follow the manufacturer guidance, and the output network must be selected for the implemented topology. A 50 V supply, high-current output routing, output protection, and exposed-pad heat sinking are core implementation requirements.

🧩

Digital Audio Speaker System

The TAS5631PHD is well matched to a digital active-speaker system in which a PWM-capable signal chain directly commands the amplifier. Differential or single-ended input options allow the designer to align the interface with the upstream processor, and the 50 V architecture supports high-power speaker drive without an analog output stage at the loudspeaker. Because TAS5631PHD accepts PWM rather than conventional analog audio, timing and signal integrity must be controlled from the processor through the amplifier input. The system also benefits from integrated feedback, but the board still needs careful partitioning between digital control, high-voltage supply routing, and high-current audio outputs.

🎚️

Professional Audio Power Module

TAS5631PHD is suitable for a modular professional-audio power amplifier that combines high stereo output power with a compact surface-mount implementation. The 64-pin HTQFP package exposes its thermal pad for direct connection to the board copper plane, while integrated PurePath HD feedback targets low distortion across changing speaker loads. Professional installations may demand extended-temperature operation, so the temperature grade and derating requirements must be checked for the selected ordering variant. The power supply must be engineered for the 50 V operating rail and transient behavior, and output filtering, protection, and grounding must be verified for the intended installation.

🎧

Multi-Way Loudspeaker Power Stage

The TAS5631PHD can form the central high-power stage of a multi-way loudspeaker, driving compatible 4 Ω to 8 Ω drivers with up to 300 W stereo capability. Its integrated feedback allows the output stage to respond to load variation, while the high efficiency of a Class-D implementation reduces the heat associated with continuously carrying linear output current. The amplifier still requires dedicated output inductors or the network specified by the manufacturer, correct bootstrap components, and carefully controlled ground returns. Crosstalk and switching-noise mitigation depend on keeping sensitive input and timing traces away from the power stage and on using an appropriately partitioned power supply.

Ringkasan Produk Disebarkan

TAS5631BPHD Related 300 W stereo Class-D amplifier for product-family evaluation Dipergunakan di: High-Power Active Stereo Speakers, Home-Theater Power Amplifier, Active Subwoofer Amplifier, Digital Audio Speaker System, Professional Audio Power Module, Multi-Way Loudspeaker Power Stage
What is the Texas Instruments TAS5631PHD?
The Texas Instruments TAS5631PHD is a PWM-input Class-D audio power amplifier with integrated PurePath HD closed-loop feedback. According to the manufacturer product page, it can deliver up to 300 W in stereo operation into 4 Ω to 8 Ω speakers from a single 50 V supply. The device is packaged in a 64-pin HTQFP measuring 14 mm by 14 mm and can also support mono operation at up to 600 W.
What are the key specifications of TAS5631PHD that engineers should know?
The TAS5631PHD is a 64-pin HTQFP audio amplifier rated for 300 W stereo or 600 W mono output. Its major electrical and functional characteristics include a 50 V power supply, 4 Ω to 8 Ω stereo speaker loading, PWM command input, differential or single-ended operation, and integrated PurePath HD feedback. Texas Instruments states that the architecture can maintain total harmonic distortion below 0.03% while retaining the efficiency advantages associated with Class-D amplification.
How does TAS5631PHD compare with a linear Class-AB amplifier?
The TAS5631PHD uses a PWM-input Class-D output stage, whereas a linear Class-AB amplifier directly amplifies an analog waveform. The Class-D architecture can reduce conduction loss because the output devices switch rather than carrying continuous linear current. Texas Instruments specifies less than 0.03% THD for the TAS5631PHD, but its system still requires PWM-compatible signal generation and carefully designed output filtering and power routing.
Can the TAS5631PHD drive 4-ohm and 8-ohm speakers?
Yes. Texas Instruments specifies the TAS5631PHD for 4 Ω to 8 Ω speaker loads in a 2-channel stereo configuration and identifies 300 W as the maximum stereo output capability from a single 50 V supply. Actual permissible power also depends on the channel configuration, supply voltage, thermal design, output network, and manufacturer test conditions. A speaker with a lower nominal impedance should not be connected without a proper load-matching design.
What input does TAS5631PHD require?
The TAS5631PHD requires a PWM command signal rather than a conventional analog audio input. Texas Instruments identifies differential and single-ended input modes for the device. The upstream audio processor must generate a compatible PWM waveform and maintain the signal amplitude and timing required by the amplifier. This makes the TAS5631PHD most appropriate in active-speaker and digital-audio architectures where a PWM audio processor is already present.
Where can I download the TAS5631PHD datasheet PDF?
The official TAS5631PHD technical documents are available through the Texas Instruments product page at https://www.ti.com/product/TAS5631. Use the datasheet link on that page for the definitive electrical characteristics, pin configuration, application circuit, thermal data, and ordering information. The pin description table and package outline in the manufacturer datasheet should be used directly when assigning PCB nets and designing the exposed-pad thermal connection.
Where can I find the TAS5631PHD pinout?
The TAS5631PHD pinout is documented in the pin-configuration section of the Texas Instruments TAS5631 datasheet. The component uses a 64-pin HTQFP package, so the schematic symbol and PCB footprint must be checked against the datasheet rather than inferred from a generic 64-pin drawing. Pay particular attention to supply pins, ground pins, power-stage outputs, PWM inputs, bootstrap nodes, and the exposed thermal pad.
Does TAS5631PHD support mono operation?
Yes. The TAS5631PHD can be configured for 1-channel mono or 2-channel stereo operation. Texas Instruments identifies a maximum mono capability of 600 W and a maximum stereo capability of 300 W from a single 50 V supply. In a mono design, the amplifier channel allocation and output-filter arrangement must follow the manufacturer application guidance, and the power supply and thermal system must be sized for the selected operating mode.
What is PurePath HD in the TAS5631PHD?
PurePath HD is Texas Instruments' integrated closed-loop feedback technology for the TAS5631PHD Class-D output stage. The feedback system monitors output behavior and corrects the amplifier drive, helping the device maintain low distortion as loudspeaker load conditions change. According to the manufacturer product page, the approach can achieve total harmonic distortion below 0.03% while preserving the power-efficiency benefits typical of Class-D amplification.
What thermal design is needed for a TAS5631PHD 300 W design?
A TAS5631PHD design intended for high output power requires the exposed thermal pad connected to a substantial copper thermal plane and an enclosure strategy that limits junction temperature. Estimated: power dissipated by the power stage equals the difference between DC supply power and delivered audio output power, with the exact dissipation depending on the switching topology, output waveform, efficiency, and channel loading. Use the manufacturer thermal data and application guidance for the final copper area and thermal design.
What PCB layout practices are important for TAS5631PHD?
Route the high-current speaker outputs and power-supply connections with very low loop area and impedance. Keep the input and PWM timing paths away from output switching nodes, use the application-recommended bootstrap and filtering networks, and provide a continuous thermal connection beneath the exposed pad. Broad copper improves electrical performance and heat spreading, while careful via placement prevents excessive inductance from degrading switching behavior or creating EMI problems.
Where can I buy TAS5631PHD online and what is its price?
Use the Request a Quote form on this page to request current TAS5631PHD pricing, stock confirmation, and lead time. The quote form provides a direct purchasing route without publishing a potentially stale price figure in the technical description. Confirm the exact 64-pin HTQFP ordering suffix and required reel or tray packing when submitting the request.
What is the current lead time for TAS5631PHD?
The current lead time for TAS5631PHD should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, package packing option, production allocation, and current inventory. Provide the required quantity, target package, and anticipated delivery schedule with the request so the commercial response reflects the actual production requirement.
Is TAS5631PHD in stock?
Current TAS5631PHD stock status should be confirmed through the Request a Quote form on this page. Include the required quantity and preferred 64-pin HTQFP packing format in the request. A confirmed factory or authorized-channel allocation is preferable to relying on an unqualified marketplace listing because the amplifier is a high-power component with package, grade, and traceable-source considerations.
What is the best drop-in replacement for TAS5631PHD?
No replacement should be called a drop-in for TAS5631PHD unless its exact 64-pin HTQFP pinout, electrical ratings, thermal limits, and PWM interface have been verified. The identified TAS5631PHDR is the tape-and-reel ordering form of the same device rather than an engineering alternative, while TAS5631BPHD is a closely related device whose automotive-grade details must be checked. Validate the complete datasheet before substituting either option into an existing design.
Can TAS5631BPHD replace TAS5631PHD?
TAS5631BPHD is the closest same-family candidate identified for TAS5631PHD, but replacement requires a final pin-by-pin and electrical comparison against the manufacturer datasheets. It is associated with the same 300 W stereo Class-D function and a 64-pin HTQFP family, but automotive qualification and other ordering details may differ. Confirm supply limits, feedback configuration, thermal data, and every external connection before approving the substitution.
What can replace TAS5631PHD in a powered speaker?
The strongest candidate is a functionally equivalent TI Class-D amplifier that uses the same 64-pin HTQFP footprint and the same PWM input and power-stage connections. TAS5631BPHD is the principal related part found, while TAS5631PHDR is only the reel-pack form of TAS5631PHD. Do not substitute candidates with smaller packages or different input architectures without redesigning the PCB, supply, output filter, thermal structure, and control interface.
Is TAS5631PHD the same as TAS5631PHDR?
TAS5631PHD and TAS5631PHDR identify the same TAS5631 amplifier with different ordering or packing suffixes, with the R suffix commonly denoting a reel-packed shipping configuration. They are not functionally different replacement devices. Confirm the package dimensions, exposed-pad requirements, tape orientation, and orderable quantity against the manufacturer ordering information before assigning either suffix in the BOM.
What is the best Texas Instruments equivalent for TAS5631PHD?
TAS5631BPHD is the leading Texas Instruments equivalent candidate because it is identified as a related 300 W, two-channel PWM-input Class-D amplifier using the same 64-pin HTQFP family. It should be treated as a qualified-family alternative only after checking its complete pin map, automotive qualifications, supply constraints, and thermal characteristics. TAS5631PHDR is the same electrical device in a different orderable suffix.

Data referensi kejuruteraan untuk TAS5631PHD — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose TAS5631PHD for a 300 W stereo or 600 W mono Class-D design that uses a 50 V supply, requires a PWM command interface, and benefits from integrated PurePath HD feedback. It is particularly appropriate when the 64-pin HTQFP package and exposed-pad thermal approach fit an existing power-amplifier PCB. TAS5631BPHD is the closest same-family candidate and should be considered when its automotive-related grade is required, but every pin, protection threshold, thermal limit, and external component must be verified before substitution. TAS5631PHDR is the reel-packed ordering form of the same device, not a distinct functional alternative. Reject other listed candidates when they use a different package, input architecture, or power-stage topology. In every case, confirm the 50 V supply design, speaker impedance, output network, exposed-pad cooling, and conducted-emissions requirements before production release.

Perbandingan dengan Gantian

Parametr Produk Ini TAS5631BPHD
Brand Texas Instruments Texas Instruments
Package 64-pin HTQFP (14 mm x 14 mm) 64-pin HTQFP (14 mm x 14 mm)
Device Type PWM-input Class-D audio power amplifier PWM-input Class-D audio power amplifier
Maximum Stereo Output Power 300 W 300 W
Speaker Impedance 4 Ω to 8 Ω 4 Ω to 8 Ω
Power Supply Voltage 50 V 50 V
Feedback Architecture Integrated PurePath HD closed-loop feedback Integrated PurePath HD closed-loop feedback
Channel Configuration 1-channel mono or 2-channel stereo 2-channel stereo
Input Signal PWM input PWM input

Penyeberangsung Jelas

  • High integrated stereo output capability (vsTAS5631BPHD)
  • Mono and stereo operating flexibility (vsTAS5631BPHD)
  • Integrated closed-loop feedback (vsTAS5631BPHD)
  • Single 50 V power-supply architecture (vsTAS5631BPHD)

Catatan Desain

Treat the exposed thermal pad as the primary heat-transfer path rather than an optional electrical connection. Estimated: the power stage dissipation is approximately PVD = VIN x IOUT_DC - POUT, with the actual values dependent on channel loading, efficiency, and signal content. Compare that dissipation with the manufacturer's thermal-resistance data, then connect the pad to an uninterrupted copper plane and provide conduction to the enclosure when sustained high-power output is expected.

Use the shortest possible paths for the 50 V supply and speaker outputs. High di/dt in these conductors creates voltage spikes, EMI, and audible instability if loop inductance is excessive. Place input, bootstrap, and compensation components close to their associated pins; keep switching-node copper away from sensitive PWM and feedback routing; and use multiple vias where the datasheet or reference layout specifies them. Confirm the PCB stack-up and exposed-pad via pattern against the manufacturer footprint.

The power supply must support the 50 V rail, sustained channel dissipation, startup current, and output-filter charging without causing rail collapse or protection oscillation. Use low-ESR bulk and local decoupling capacitors according to the reference design. Verify the supply's ability to absorb the amplifier's dynamic current demand at low frequencies, because a laboratory voltage source can satisfy a nominal 50 V level while still failing during high-power audio transients.

Preserve PWM timing and edge quality from the audio processor to the amplifier. Route the differential input as a tightly coupled pair when differential mode is selected, provide the input filtering specified by the datasheet, and keep the PWM path isolated from power-stage switching nodes. Incorrect timing, inadequate input filtering, or unstable grounding can manifest as clipping, oscillation, EMI, or protection trips even when the 50 V supply and speaker load are correct.

Do not treat the 300 W or 600 W ratings as unconditional continuous output limits. Operating mode, load impedance, supply voltage, thermal conditions, and the manufacturer's test definition determine valid performance. Also avoid assuming that a similarly rated amplifier is a drop-in replacement: PWM timing, bootstrap polarity, feedback topology, exposed-pad connections, output filtering, and protection thresholds must match. Validate every pin and external component before releasing a substitution to production.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

Compliance status was not stated in the available product-page and distributor summaries. Verify current declarations and the exact orderable suffix with Texas Instruments.

Pencarian Berhubungan

TAS5631PHD datasheet TAS5631PHD pinout TAS5631PHD datasheet pdf TAS5631PHD equivalent TAS5631PHD replacement TAS5631PHD vs TAS5631BPHD TAS5631PHD footprint TAS5631PHD price TAS5631PHD stock Texas Instruments TAS5631PHD TAS5631PHD 300W stereo amplifier TAS5631PHD 50V power supply TAS5631PHD active speaker application TAS5631PHD 64-pin HTQFP pinout

Komponen dan Tanda berkaitan

Texas Instruments TAS5631PHD TAS5631BPHD TAS5631PHDR PWM-input Class-D amplifier Class-D power amplifier audio amplifier IC PurePath HD closed-loop feedback 300 W stereo output 600 W mono output 50 V power supply 4 ohm speaker 8 ohm speaker total harmonic distortion THD differential input single-ended input 64-pin HTQFP 14 mm by 14 mm package exposed thermal pad PurePath HD technology PWM audio active loudspeaker power management IC
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ