TAS5631PHD - 300W Stereo Class-D Amplifier | Texas Instruments
MPN: TAS5631PHD ✓ 啟用中TAS5631PHD 概覽
A Class-D audio amplifier is a switching power stage in which the output transistor conducts only part of each signal cycle. This architecture belongs to the amplifier-IC hierarchy, where a Class-D amplifier converts a PWM command signal into a high-current speaker output. Compared with a conventional linear Class-AB output stage, the TAS5631PHD reduces power dissipation when driving high-power loudspeakers, while its integrated feedback is intended to preserve low distortion under real load conditions.
The principal features of the TAS5631PHD are its 300 W stereo capability, support for 4 Ω to 8 Ω speaker loads, 50 V supply operation, differential or single-ended input operation, and integrated PurePath HD feedback. The manufacturer states that PurePath HD can achieve total harmonic distortion below 0.03% while retaining the efficiency benefits of Class-D operation. These characteristics make the device suitable for high-power stereo audio, active speakers, home-theater amplification, professional audio systems, and powered subwoovers when the application can use a 50 V amplifier supply.
TAS5631PHD receives a PWM command signal rather than an analog audio waveform. A system-level audio processor must therefore generate the required PWM format before the amplifier drives the loudspeakers. The integrated feedback network provides closed-loop output control, but the external power stage, supply network, output filtering, speaker connections, thermal management, and protection implementation still require careful engineering for a reliable 300 W design.
Typical deployments include powered stereo speakers, multimedia speaker systems, active subwoofers, home-theater power amplifiers, and commercial audio installations. The 300 W rating describes the maximum stereo capability under specified test conditions, not a guarantee that every speaker, enclosure, supply, board layout, or thermal design can safely sustain that output. Impedance, channel configuration, thermal limits, supply capability, and signal-processing requirements determine the practical operating envelope.
Designers should follow the manufacturer datasheet for pin assignments, bootstrap-capacitor values, input filtering, output filtering, power-supply layout, and thermal implementation. The exposed thermal pad must be connected to the recommended thermal plane, and the high-current output paths require very low-inductance routing. This page combines the confirmed device characteristics, application guidance, and substitution constraints into an engineering-focused overview of the TAS5631PHD.
直接替換替代品,適用於 TAS5631PHD — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
TAS5631BPHD
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
TAS5631PHD 最大額定值與電氣特性
| Device Type | PWM-input Class-D audio power amplifier |
| Channel Configuration | 1-channel mono or 2-channel stereo |
| Maximum Stereo Output Power | 300 W |
| Stereo Speaker Impedance | 4 Ω to 8 Ω |
| Maximum Mono Output Power | 600 W |
| Power Supply Voltage | 50 V |
| Feedback Architecture | Integrated closed-loop PurePath HD feedback |
| Total Harmonic Distortion | Less than 0.03% |
| Input Signal | PWM input |
| Input Mode | Differential or single-ended |
| 輸出配置 | Differential or single-ended |
| 封裝 | 64-pin HTQFP, 14 mm x 14 mm |
| 安裝類型 | Surface mount |
| Thermal Pad | Exposed pad |
TAS5631PHD 64-pin htqfp, 14 mm x 14 mm 腳位配置指南
TAS5631PHD(64-pin htqfp, 14 mm x 14 mm 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: TAS5631PHD.
請參閱 資料表 以查看完整腳位配置。
典型應用
TAS5631PHD 適用於 6 應用s: High-Power Active Stereo Speakers, Home-Theater Power Amplifier, Active Subwoofer Amplifier, Digital Audio Speaker System, Professional Audio Power Module, Multi-Way Loudspeaker Power Stage.
High-Power Active Stereo Speakers
The TAS5631PHD fits active stereo speakers that require up to 300 W per channel from a single 50 V amplifier supply. Its integrated PurePath HD feedback supports operation with 4 Ω to 8 Ω loads, while the stated total harmonic distortion of less than 0.03% targets high-fidelity playback. In this architecture, a digital audio processor produces the required PWM command signal, and the TAS5631PHD converts it into a high-current speaker output. The implementation should preserve the manufacturer-recommended bootstrap and output-filter networks. It must also provide a low-impedance supply path and a substantial exposed-pad thermal plane so that output capability is not limited by board heating.
推薦
Home-Theater Power Amplifier
The TAS5631PHD is suitable for a dedicated stereo home-theater power stage because it supports 300 W stereo output into 4 Ω to 8 Ω speakers from one 50 V rail. Its PWM interface favors systems that already include a digital audio processor, and integrated PurePath HD feedback is intended to reduce distortion while loudspeaker impedance varies. The amplifier board should separate sensitive PWM timing routes from switching outputs and use very low-inductance supply and speaker connections. A thermal design suitable for sustained cinematic playback is essential, because advertised amplifier power does not by itself establish safe continuous dissipation in a compact enclosure.
推薦
Active Subwoofer Amplifier
The TAS5631PHD can serve as the power stage in an active subwoofer or multiway speaker where a 600 W mono capability and 4 Ω to 8 Ω load range are useful. Its integrated closed-loop feedback supports accurate control during changing loudspeaker loads, while the Class-D topology is favorable for a power amplifier that must deliver high output with reduced conduction loss. The exact channel configuration must follow the manufacturer guidance, and the output network must be selected for the implemented topology. A 50 V supply, high-current output routing, output protection, and exposed-pad heat sinking are core implementation requirements.
推薦
Digital Audio Speaker System
The TAS5631PHD is well matched to a digital active-speaker system in which a PWM-capable signal chain directly commands the amplifier. Differential or single-ended input options allow the designer to align the interface with the upstream processor, and the 50 V architecture supports high-power speaker drive without an analog output stage at the loudspeaker. Because TAS5631PHD accepts PWM rather than conventional analog audio, timing and signal integrity must be controlled from the processor through the amplifier input. The system also benefits from integrated feedback, but the board still needs careful partitioning between digital control, high-voltage supply routing, and high-current audio outputs.
推薦
Professional Audio Power Module
TAS5631PHD is suitable for a modular professional-audio power amplifier that combines high stereo output power with a compact surface-mount implementation. The 64-pin HTQFP package exposes its thermal pad for direct connection to the board copper plane, while integrated PurePath HD feedback targets low distortion across changing speaker loads. Professional installations may demand extended-temperature operation, so the temperature grade and derating requirements must be checked for the selected ordering variant. The power supply must be engineered for the 50 V operating rail and transient behavior, and output filtering, protection, and grounding must be verified for the intended installation.
推薦
Multi-Way Loudspeaker Power Stage
The TAS5631PHD can form the central high-power stage of a multi-way loudspeaker, driving compatible 4 Ω to 8 Ω drivers with up to 300 W stereo capability. Its integrated feedback allows the output stage to respond to load variation, while the high efficiency of a Class-D implementation reduces the heat associated with continuously carrying linear output current. The amplifier still requires dedicated output inductors or the network specified by the manufacturer, correct bootstrap components, and carefully controlled ground returns. Crosstalk and switching-noise mitigation depend on keeping sensitive input and timing traces away from the power stage and on using an appropriately partitioned power supply.
推薦
推薦產品摘要
工程參考資料,適用於 TAS5631PHD — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | TAS5631BPHD |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 64-pin HTQFP (14 mm x 14 mm) | 64-pin HTQFP (14 mm x 14 mm) |
| Device Type | PWM-input Class-D audio power amplifier | PWM-input Class-D audio power amplifier |
| Maximum Stereo Output Power | 300 W | 300 W |
| Speaker Impedance | 4 Ω to 8 Ω | 4 Ω to 8 Ω |
| Power Supply Voltage | 50 V | 50 V |
| Feedback Architecture | Integrated PurePath HD closed-loop feedback | Integrated PurePath HD closed-loop feedback |
| Channel Configuration | 1-channel mono or 2-channel stereo | 2-channel stereo |
| Input Signal | PWM input | PWM input |
主要差異化特點
- High integrated stereo output capability (對比TAS5631BPHD)
- Mono and stereo operating flexibility (對比TAS5631BPHD)
- Integrated closed-loop feedback (對比TAS5631BPHD)
- Single 50 V power-supply architecture (對比TAS5631BPHD)
設計說明
Treat the exposed thermal pad as the primary heat-transfer path rather than an optional electrical connection. Estimated: the power stage dissipation is approximately PVD = VIN x IOUT_DC - POUT, with the actual values dependent on channel loading, efficiency, and signal content. Compare that dissipation with the manufacturer's thermal-resistance data, then connect the pad to an uninterrupted copper plane and provide conduction to the enclosure when sustained high-power output is expected.
Use the shortest possible paths for the 50 V supply and speaker outputs. High di/dt in these conductors creates voltage spikes, EMI, and audible instability if loop inductance is excessive. Place input, bootstrap, and compensation components close to their associated pins; keep switching-node copper away from sensitive PWM and feedback routing; and use multiple vias where the datasheet or reference layout specifies them. Confirm the PCB stack-up and exposed-pad via pattern against the manufacturer footprint.
The power supply must support the 50 V rail, sustained channel dissipation, startup current, and output-filter charging without causing rail collapse or protection oscillation. Use low-ESR bulk and local decoupling capacitors according to the reference design. Verify the supply's ability to absorb the amplifier's dynamic current demand at low frequencies, because a laboratory voltage source can satisfy a nominal 50 V level while still failing during high-power audio transients.
Preserve PWM timing and edge quality from the audio processor to the amplifier. Route the differential input as a tightly coupled pair when differential mode is selected, provide the input filtering specified by the datasheet, and keep the PWM path isolated from power-stage switching nodes. Incorrect timing, inadequate input filtering, or unstable grounding can manifest as clipping, oscillation, EMI, or protection trips even when the 50 V supply and speaker load are correct.
Do not treat the 300 W or 600 W ratings as unconditional continuous output limits. Operating mode, load impedance, supply voltage, thermal conditions, and the manufacturer's test definition determine valid performance. Also avoid assuming that a similarly rated amplifier is a drop-in replacement: PWM timing, bootstrap polarity, feedback topology, exposed-pad connections, output filtering, and protection thresholds must match. Validate every pin and external component before releasing a substitution to production.
合規資訊
Compliance status was not stated in the available product-page and distributor summaries. Verify current declarations and the exact orderable suffix with Texas Instruments.