Texas Instruments

THS1207CDA - 12-Bit 6 MSPS Quad ADC | Texas Instruments

MPN: THS1207CDA ✓ Aktif
32-pin TSSOP Package
MOQ: 1 |

THS1207CDA Ringkasan

Texas Instruments THS1207CDA is a 12-bit, 6 MSPS, four-channel simultaneous-sampling analog-to-digital converter with a parallel DSP or microprocessor interface and channel auto-scan. The device is offered in a 32-pin TSSOP package. Its four-channel architecture acquires all four inputs during the same sampling interval, making it useful when phase-aligned measurements, synchronized sensing, or multiple channels must be captured at a consistent time reference.

An ADC is an interface component that converts an analog voltage into a digital number for processing by a microprocessor, DSP, FPGA, or embedded controller. The THS1207CDA belongs to the ADC and data-converter hierarchy, where simultaneous sampling means all four channels are captured during each conversion cycle. This differs from a multiplexer-based ADC that switches among inputs sequentially and can introduce timing differences between channel measurements.

The principal operating characteristics are 12-bit resolution, a 6 MSPS conversion rate, four simultaneously sampled inputs, and a parallel processor interface. The TI product description also identifies channel auto-scan as an additional operating feature. A 12-bit code provides 4096 quantization levels, while the 6 MSPS rate permits up to six million completed conversion results per second when the data interface and downstream processor can accept that throughput.

The pipelined conversion architecture separates sampling and resolution processing into internal stages. This supports the device's 6 MSPS throughput, but pipeline latency must be considered when aligning outputs with external events. The parallel interface is suited to systems with dedicated bus connections, rather than designs standardized around a serial converter. Because this package exposes numerous digital control and data lines, careful signal-integrity and layout work is important.

Typical uses include multichannel industrial measurement, process-control instrumentation, communications equipment, audio and vibration analysis, and other acquisition systems that need aligned samples. The same-device approach is especially helpful when comparing sensors, monitoring several power rails, or digitizing multiple inputs for real-time signal processing. In these systems, the four channels reduce the need for separate converters when their required timing can be shared.

PCB design should provide a stable reference and supply implementation, short analog input routes, and a controlled parallel-output interface. Input and reference networks require careful component selection because resistor and capacitor parasitics can affect acquisition accuracy. Designers should also confirm that downstream logic timing accommodates converter latency and that the 32-pin TSSOP footprint has adequate clearance under the assembly requirements of the board manufacturer.

This product summary combines the manufacturer specifications, ordering information, package details, and verified substitute research with practical guidance for signal routing, interface timing, and multichannel system design. It is intended to help engineers identify whether the THS1207CDA's simultaneous sampling, conversion rate, resolution, and package meet a new design or PCB-reuse requirement.

Pilihan pengganti yang segera untuk THS1207CDA — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

THS1207IDAG4

✅ Masuk Drop-In
📦 32-pin TSSOP
Same 12-bit, 6 MSPS, four-channel architecture and 32-TSSOP footprint; industrial temperature grade replaces the commercial grade of THS1207CDA.

📋 Alternatif rujukan (tidak dalam katalog)

THS1207CDAG4

✅ Masuk Drop-In
📦 32-pin TSSOP
Same 12-bit, 6 MSPS, four-channel architecture and 32-TSSOP footprint; primary functional difference is commercial temperature operation and ordering-code handling.

📋 Alternatif rujukan (tidak dalam katalog)

THS1207IDAR

✅ Masuk Drop-In
📦 32-pin TSSOP
Same 12-bit, 6 MSPS, four-channel architecture and 32-TSSOP footprint; industrial temperature grade is the primary difference from THS1207CDA.

📋 Alternatif rujukan (tidak dalam katalog)

THS1207CDA Penilaian maksimum & Ciri-ciri Elektrik

ADC Resolution 12 bit
kadar sampling 6 MSPS
Number of Input Channels 4 channels
Sampling Architecture Simultaneous sampling
Conversion Architecture Pipelined
Digital Interface Parallel DSP/microprocessor interface
Channel Auto-Scan Supported
Number of Quantization Levels 4096 levels
Kemasan 32-pin TSSOP
Package Type TSSOP, gull-wing, rectangular
Jenis Pemasangan Surface mount
Temperature Grade Commercial
Gambaran Suhu Operasi 0 °C to +70 °C
Number of Terminals 32 terminals

Panduan Konfigurasi Pin THS1207CDA tssop, gull-wing, rectangular

Konfigurasi pin untuk THS1207CDA (tssop, gull-wing, rectangular pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai tssop, gull-wing, rectangular untuk THS1207CDA

Tiada data garisan pin yang diperoleh untuk THS1207CDA.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

THS1207CDA patut untuk 6 aplikasis: Synchronized Industrial Process Measurement, Communications Signal Monitoring, Audio Channel Acquisition, Vibration and Mechanical Analysis, Power Rail Monitoring, Automated Test Equipment.

🏭

Synchronized Industrial Process Measurement

The THS1207CDA suits process instrumentation that must compare four sensor or control signals against a common time reference. Its four channels are sampled simultaneously, preventing multiplexer-style timing offsets between measurements, while the 6 MSPS conversion rate supports fast process dynamics. The 12-bit code provides 4096 quantization levels for representing each sampled voltage. Place the converter near the analog inputs, use a low-noise reference network, and connect its parallel output to a DSP or processor capable of accepting the resulting data throughput. Because this is a 32-pin TSSOP device, route sensitive inputs away from digital clock and data lines and verify acquisition settling against the final PCB layout.

🌐

Communications Signal Monitoring

The THS1207CDA can support communications monitoring when four related analog nodes must be captured at the same instant. Its simultaneous-sampling architecture is useful for comparing in-phase and quadrature channels, observing signal quality, or collecting baseband waveforms around a common trigger. The 6 MSPS rate is appropriate for many low- and intermediate-band monitoring tasks, subject to the converter's input bandwidth and SNR. Use short, impedance-controlled analog paths and a stable reference, then transfer each parallel conversion through appropriate bus timing. Validate clock jitter, bus contention, and processor latency because simultaneous sampling alone does not remove timing uncertainty introduced elsewhere in the acquisition chain.

🎧

Audio Channel Acquisition

The THS1207CDA can acquire four audio-related channels with a shared sampling instant, making it useful for comparison, calibration, and multichannel playback monitoring. Its 12-bit resolution and 6 MSPS rate can represent signals up to roughly 3 MHz under ideal Nyquist conditions, although practical bandwidth, distortion, SNR, and anti-alias requirements determine usable audio range. Place input filters close to the converter, maintain a low-noise reference, and isolate the parallel digital bus from the audio input paths. For conventional oversampled audio, confirm that 12-bit performance and the converter's full-scale range meet the system requirement before finalizing the signal chain.

🔧

Vibration and Mechanical Analysis

The THS1207CDA is appropriate for multichannel vibration testing where accelerometers, strain gauges, or other transducers must be sampled concurrently. Four simultaneous channels allow phase relationships between mechanical responses to be evaluated without the sequential channel offset of a multiplexed converter. The 6 MSPS rate supports analysis of a useful portion of the mechanical spectrum, while the 12-bit resolution affects dynamic range and noise floor. Use matched input-conditioning networks, careful grounding, and differential or single-ended routing appropriate to the sensor interface. PCB validation should measure channel skew, noise coupling, and settling because sensor excitation and transducer bandwidth can constrain the practical measurement performance.

⚡

Power Rail Monitoring

The THS1207CDA can monitor four power-related voltages when a controller or data logger requires a simultaneous snapshot of multiple rails. Sampling the channels together reduces the uncertainty caused by measuring rails at different moments and supports rapid detection of sequencing faults or transients. The 6 MSPS rate is fast enough for many monitoring loops, but the usable bandwidth and response depend on the input network, reference stability, and acquisition software. Choose resistor dividers that preserve the required full-scale range, add protection appropriate to the rails, and keep high-current switching nodes physically separated from the analog inputs. Calibrate gain and offset over the expected rail and temperature range.

📺

Automated Test Equipment

The THS1207CDA fits automated test systems that need four analog observations associated with one stimulus event. Simultaneous sampling allows a controller to compare responses captured under the same operating conditions, while the 6 MSPS rate supports repeated sweeps and moderate-speed transient characterization. The parallel interface is useful when the fixture controller can capture data efficiently, although bus timing and throughput must be checked against the sample rate. Minimize analog trace length, maintain a stable reference, and use separate return paths for digital clock and data lines. Account for pipeline delay when correlating converter outputs with the applied stimulus or trigger event.

What is the THS1207CDA?
The THS1207CDA is a 12-bit, 6 MSPS, four-channel simultaneous-sampling ADC with a parallel DSP or microprocessor interface and channel auto-scan. It is packaged in a 32-pin TSSOP. According to the Texas Instruments THS1207 product page, all four analog inputs are sampled simultaneously, allowing the converter to support synchronized multichannel measurements in industrial, communications, and signal-processing systems.
What is the sampling rate of THS1207CDA?
The THS1207CDA converts at 6 MSPS, meaning it can complete up to six million analog-to-digital conversions per second. Texas Instruments identifies the device as a 12-bit, 6 MSPS simultaneous-sampling quad-channel ADC. The actual usable throughput also depends on the parallel bus timing, downstream processor bandwidth, control configuration, and acquisition sequence implemented in the system.
How many channels can THS1207CDA sample simultaneously?
The THS1207CDA has four analog input channels and samples them simultaneously. Simultaneous sampling is valuable when channels must share the same time reference because it avoids the sequential timing offset associated with multiplexing individual inputs through one converter. The manufacturer product page identifies the device as a quad-channel, simultaneous-sampling ADC with channel auto-scan.
What is the difference between simultaneous sampling and multiplexing in THS1207CDA?
Simultaneous sampling captures all four THS1207CDA inputs during the same sampling interval, whereas a multiplexed ADC selects and converts inputs one after another. The first arrangement is preferable for phase-sensitive measurements because every channel shares the same acquisition time. The second may require time-interleaving correction when channel-to-channel timing offsets become significant.
What interface does THS1207CDA use?
The THS1207CDA uses a parallel DSP or microprocessor interface. This provides separate digital data and control lines rather than relying on a serial data link. Texas Instruments identifies the parallel processor interface in the product description, while the exact output bus width, logic levels, timing states, and pin assignments are documented in the manufacturer pin-description table.
Where can I download the THS1207 datasheet?
The official THS1207 documentation is available from the Texas Instruments product page at https://www.ti.com/product/THS1207. The page provides manufacturer product information, datasheet access, ordering information, and parameter details. Use the pin-description table and timing diagrams in the manufacturer datasheet when assigning the 32 TSSOP connections and establishing processor-interface timing.
Where can I find the THS1207CDA pinout?
The THS1207CDA pinout is defined in the Texas Instruments THS1207 manufacturer datasheet, where all 32 TSSOP terminals are identified by their analog, digital, power, ground, control, and data functions. Use the pin-description table when assigning tracks and when checking exposed supply or ground requirements. The package diagram on this page is a generic representation because no verified terminal-by-terminal pin table was available for publication.
Is THS1207CDA suitable for simultaneous multichannel signal acquisition?
Yes, the THS1207CDA is suitable when several inputs must be captured at one time reference. Its four simultaneous-sampling channels, 12-bit resolution, and 6 MSPS conversion rate support synchronized waveform, process, vibration, and communications measurements. Suitability still depends on input range, bandwidth, reference quality, acquisition timing, and downstream interface bandwidth, which should be confirmed from the manufacturer specifications.
THS1207CDA vs THS1207IDAG4: which temperature grade should I choose?
Choose the THS1207CDA for a commercial-temperature design and the THS1207IDAG4 when industrial-temperature operation is required. Both devices are identified as 32-pin TSSOP devices in the same THS1207 family with 12-bit, 6 MSPS quad-channel conversion, but the I-grade suffix denotes an expanded temperature grade. Confirm the exact limits and qualification requirements against the current manufacturer ordering information.
When should I choose THS1207CDA over another multichannel ADC?
Choose the THS1207CDA when a design needs four channels sampled simultaneously at up to 6 MSPS through a parallel processor interface in a 32-pin TSSOP. It is especially suitable for synchronized industrial measurement and real-time signal processing. Choose another converter if the system instead requires a serial interface, different input ranges, wider bandwidth, lower power, or a package outside the supported 32-TSSOP footprint.
Is THS1207CDA suitable for audio and vibration analysis?
The THS1207CDA can fit multichannel audio and vibration analysis when synchronized conversion is more important than compactness or low power. Its four channels share a sampling instant, and the 6 MSPS rate supports analysis of signals within the converter's bandwidth and Nyquist limits. The 12-bit resolution should be checked against the required signal-to-noise ratio, while the parallel interface must be supported by the processor or DSP.
What is the best drop-in replacement for THS1207CDA?
THS1207IDAG4 is the closest same-family drop-in candidate identified for the THS1207CDA because both use the 32-pin TSSOP footprint and retain the 12-bit, 6 MSPS, four-channel architecture. The important selection difference is the temperature grade rather than resolution or sampling rate. Review the manufacturer pin and electrical tables before substitution, particularly when moving between commercial and industrial temperature requirements.
Can THS1207IDAG4 replace THS1207CDA without changing the PCB?
THS1207IDAG4 can serve as a PCB-compatible replacement when the commercial-grade THS1207CDA does not meet the required temperature range and the remaining electrical and functional requirements are acceptable. Both parts use the 32-pin TSSOP format and the same four-channel, 12-bit, 6 MSPS family architecture. Verify operating temperature, supply limits, control logic, acquisition timing, and qualification requirements before production use.
What is the best cross-brand equivalent for THS1207CDA?
No verified cross-brand equivalent with a confirmed 32-pin TSSOP footprint and matching pinout was identified for the THS1207CDA. A functionally similar ADC is not automatically a drop-in replacement because parallel bus width, control pins, supply levels, input ranges, timing, and package details must all align. Use the Texas Instruments cross-reference resources or request engineering review of a specific candidate before considering a cross-brand substitution.
How do I buy THS1207CDA and check price and lead time?
Use the Request a Quote form on this page to request current THS1207CDA pricing, stock, minimum order quantity, and lead time for the exact 32-pin TSSOP ordering code. Commercial availability can change with package, production status, and order quantity. The quoted request should include THS1207CDA, the target quantity, shipment destination, and any required tube, tape-and-reel, or traceability requirements.
How should THS1207CDA be placed on a PCB for reliable data capture?
Place the THS1207CDA so that analog input, reference, and supply connections remain short, while keeping parallel data and control traces away from sensitive analog nodes. Follow the manufacturer recommended application circuit and pinout when selecting decoupling capacitors and reference components. Provide uninterrupted ground paths, observe the TSSOP assembly guidelines, and validate interface timing, settling behavior, and simultaneous-channel performance on the completed layout.

Data referensi kejuruteraan untuk THS1207CDA — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the THS1207CDA when a design needs a 12-bit, 6 MSPS, four-channel simultaneous-sampling ADC with a parallel processor interface and a 32-pin TSSOP footprint. It is a strong fit for synchronized industrial measurement, communications monitoring, audio comparison, vibration analysis, and multirail monitoring where all four channels must share one sampling instant. Select THS1207IDAG4 or THS1207IDAR when the same electrical and package compatibility is needed across an industrial temperature range; review qualification and ordering details before substitution. THS1207CDAG4 retains the commercial-grade family configuration and may be considered when its ordering-code and packaging requirements match the assembly plan. None of these choices resolves a requirement for a serial interface, different pinout, wider analog bandwidth, or lower-power operation. If the system cannot support the parallel bus or requires specifications beyond the verified 12-bit and 6 MSPS characteristics, evaluate a different converter family rather than forcing a footprint-compatible replacement.

Perbandingan dengan Gantian

Parametr Produk Ini THS1207IDAG4 THS1207CDAG4 THS1207IDAR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 32-pin TSSOP 32-pin TSSOP 32-pin TSSOP 32-pin TSSOP
Resolution 12 bit 12 bit 12 bit 12 bit
Sampling Rate 6 MSPS 6 MSPS 6 MSPS 6 MSPS
Input Channels 4 channels 4 channels 4 channels 4 channels
Sampling Method Simultaneous sampling Simultaneous sampling Simultaneous sampling Simultaneous sampling
Digital Interface Parallel DSP/microprocessor interface Parallel DSP/microprocessor interface Parallel DSP/microprocessor interface Parallel DSP/microprocessor interface
Temperature Grade Commercial, 0 °C to +70 °C Industrial Commercial Industrial
Channel Auto-Scan Supported Supported Supported Supported

Penyeberangsung Jelas

  • Four channels captured at one time reference (vsTHS1207IDAG4)
  • Same 32-TSSOP mechanical footprint for PCB reuse (vsTHS1207CDAG4)
  • Commercial operating range with the same family conversion performance (vsTHS1207IDAR)

Catatan Desain

Route the four analog inputs as short, controlled-impedance paths and keep them away from the parallel data bus and clock lines. Place input-series resistance, anti-alias filtering, and any reference components close to the converter according to the manufacturer application circuit. Provide a quiet ground-return path for the analog section and use the TSSOP layout and assembly guidance for the selected board process.

The 6 MSPS conversion rate means the parallel interface must be analyzed as a synchronous, high-edge-rate bus. Use short traces, continuous reference planes, appropriate termination where required, and a processor or DSP that can accept the specified output timing. Account for pipeline delay when aligning converted data with a trigger. Validate setup and hold behavior on the assembled board rather than relying only on simulation.

Do not treat simultaneous sampling as a substitute for a complete front-end design. Confirm the full-scale input range, input impedance, source impedance, reference stability, and allowed bandwidth before selecting divider and filter values. A converter operating outside its recommended drive impedance can lose accuracy even though the four channels are sampled at the same instant.

Place bypass and reference-decoupling components at the pins designated by the manufacturer pin table, with short current loops and solid ground connections. Because the THS1207CDA uses a 32-pin TSSOP package, verify lane clearance, solder-mask design, thermal exposure, and assembly-line compatibility. Keep test points away from sensitive input nodes unless their loading has been evaluated.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ordering code. Confirm the current manufacturer product and quality documentation before production release.

Data disahkan pada: 2026-11-16 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

ths1207 datasheet THS1207CDA datasheet THS1207CDA pinout THS1207CDA specifications THS1207CDA equivalent THS1207CDA replacement THS1207CDA price THS1207CDA stock Texas Instruments THS1207CDA THS1207CDA vs THS1207IDAG4 THS1207CDA 32-TSSOP footprint THS1207CDA application circuit

Komponen dan Tanda berkaitan

Texas Instruments THS1207CDA THS1207 THS1207IDAG4 THS1207CDAG4 THS1207IDAR THS1206QDA THS1041IDW analog-to-digital converter ADC data converter semiconductor 12-bit resolution 6 MSPS simultaneous sampling quad-channel ADC pipelined ADC parallel interface DSP interface microprocessor interface channel auto-scan 32-pin TSSOP TSSOP package family surface-mount package industrial process measurement
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ