Texas Instruments

THS4021CD - 350 MHz Low-Noise VFA | TI | Imaging

MPN: THS4021CD ✓ Aktif
plus or minus 16 V, or 32 V total Vdss 8-pin SOIC, 0.154 inch body width, 3.90 mm Package
MOQ: 1 |

THS4021CD Ringkasan

The Texas Instruments THS4021CD is a single-channel, ultra-low-noise, voltage-feedback amplifier with 350 MHz bandwidth, a 470 V/us slew rate, and operation from plus or minus 16 V in an 8-pin SOIC package. The device is intended for high-speed signal conditioning where low voltage noise, wide bandwidth, and fast transient response are required. It is particularly suited to communications, imaging, instrumentation, and buffer applications.

A voltage-feedback amplifier is a feedback-controlled amplifier category that uses voltage-mode feedback to balance gain and bandwidth. Voltage-feedback amplifiers belong to the broader operational-amplifier and analog-signal-processing hierarchy. Compared with current-feedback amplifiers, they offer a conventional differential-input topology and are widely used for precision gain, impedance conversion, waveform shaping, and signal buffering where the required operating bandwidth is compatible with the amplifier's gain-bandwidth behavior.

The THS4021CD combines a 350 MHz small-signal bandwidth with a 470 V/us slew rate, allowing it to reproduce rapidly changing analog signals while limiting slew-rate distortion. Its ultra-low-noise design targets applications in which amplifier-generated noise can obscure the signal under analysis. The single-channel configuration also reduces board area compared with a dual amplifier when only one high-speed signal path is required. The device is available in the compact 8-SOIC surface-mount package identified by the CD ordering code.

Its voltage-feedback architecture supports precise analog signal conditioning in closed-loop systems. The combination of wide bandwidth and high slew rate is important when handling fast edges, pulse-like waveforms, or high-frequency small-signal measurements. Because the component is intended for noise-sensitive paths, PCB layout, grounding, power bypassing, and control of parasitic capacitance can materially affect achieved performance. Signal routing should be short and symmetric, while supply connections should use a low-impedance return path.

Typical applications include communications receivers, medical and industrial imaging, oscilloscope input paths, high-speed instrumentation, active filtering, and general-purpose high-speed buffers. The device is also appropriate wherever a single analog channel must preserve signal fidelity across a substantially wider frequency range than conventional general-purpose amplifiers can support. For very low-amplitude signals, designers should evaluate input-referred noise, source impedance, gain settings, and the bandwidth required by the measurement before finalizing the signal chain.

A critical design consideration is that high-speed operation makes board construction and grounding part of the circuit. Place power-bypass capacitors close to the supply pins, maintain a continuous ground reference, avoid long input and feedback traces, and use controlled-impedance routing when signal rates are high. Gain-setting resistors and compensation components should be positioned close to the relevant amplifier pins to minimize parasitic effects that can alter bandwidth, stability, or pulse response.

This product page combines the exact manufacturer and distributor specifications with a practical THS4021CD pin and footprint assessment, application guidance, design considerations, and a conservative drop-in replacement review. It also distinguishes verified same-footprint ordering variants from alternatives that require a package or functional change, helping engineers make a replacement decision without assuming that a similar high-speed amplifier is electrically interchangeable.

Pilihan pengganti yang segera untuk THS4021CD — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera THS4021CD (sama faktor bentuk dan kaki) — berbeza dalam Package, Amplifier Type, Slew Rate, Number of Channels, Supply Voltage Range.

Texas Instruments
Package: 8-pin SOIC, 3.90 mm width
Amplifier Type: Single-channel voltage-feedback amplifier
Slew Rate: 470 V/µs
Bandingkan Dengan THS4021CD →
Texas Instruments
Package: SOIC-8 (D)
Amplifier Type: Voltage Feedback
Slew Rate: 100 V/us
Bandingkan Dengan THS4021CD →
Texas Instruments
Package: SOIC-8 (D)
Amplifier Type: Voltage Feedback
Slew Rate: 100 V/us
Bandingkan Dengan THS4021CD →
Texas Instruments
Package: 8-SOIC (0.154 in, 3.90 mm width)
Amplifier Type: Voltage Feedback
Slew Rate: 100 V/us
Bandingkan Dengan THS4021CD →

THS4021IDG4

✅ Masuk Drop-In
📦 8-pin SOIC
Same THS4021 family and 8-pin SOIC format; the documented ordering comparison indicates a different temperature-grade suffix, with the exact temperature-range difference requiring confirmation

📋 Alternatif rujukan (tidak dalam katalog)

THS4021IDR

✅ Masuk Drop-In
📦 8-pin SOIC
Same THS4021 family and 8-pin SOIC format; differs from THS4021CD by the ID temperature-grade and tape-and-reel ordering configuration

📋 Alternatif rujukan (tidak dalam katalog)

THS4021CDR

✅ Masuk Drop-In
📦 8-pin SOIC
Same THS4021 electrical configuration and 8-pin SOIC footprint; differs from THS4021CD only in tape-and-reel delivery packaging rather than performance

📋 Alternatif rujukan (tidak dalam katalog)

THS4031IDR

✅ Masuk Drop-In
Texas Instruments
📦 8-pin SOIC
Voltage Feedback · 1 · 100 MHz · 275 MHz · 100 V/us · 90 dB · 60 ns

Hubungi untuk harga

Lihat Datasheet →

THS4021IP

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 8-pin SOIC
Same THS4021 family and 8-pin SOIC format; differs by the IP industrial-temperature ordering suffix, with the exact temperature limits requiring datasheet confirmation

📋 Alternatif rujukan (tidak dalam katalog)

THS4021CD Penilaian maksimum & Ciri-ciri Elektrik

Amplifier Type Voltage-feedback amplifier
Channel Count 1 channel
Small-Signal Bandwidth 350 MHz
Slew Rate 470 V/us
Supply Voltage Range plus or minus 16 V, or 32 V total
Kemasan 8-pin SOIC, 0.154 inch body width, 3.90 mm
Jenis Pemasangan Surface mount
Operating Supply Range plus or minus 16 V

Panduan Konfigurasi Pin THS4021CD 8-pin soic, 0.154 inch body width, 3.90 mm

Konfigurasi pin untuk THS4021CD (8-pin soic, 0.154 inch body width, 3.90 mm pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai 8-pin soic, 0.154 inch body width, 3.90 mm untuk THS4021CD

Tiada data garisan pin yang diperoleh untuk THS4021CD.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

THS4021CD patut untuk 6 aplikasis: Communications Signal Conditioning, Medical and Industrial Imaging, High-Speed Instrumentation, Oscilloscope and Test Signal Paths, Active Filtering and Waveform Conditioning, High-Speed Signal Buffering.

🌐

Communications Signal Conditioning

The THS4021CD fits communications signal-conditioning stages that require a single high-speed analog channel with low voltage noise. Its 350 MHz bandwidth and 470 V/us slew rate provide margin for fast edges and higher-frequency signal content while preserving a conventional voltage-feedback topology. The amplifier can be placed before a downstream converter or receiver input when the required gain, source impedance, and output amplitude are compatible with the closed-loop response. Because high-speed operation magnifies routing and grounding defects, use short traces, a solid ground reference, and close supply bypassing. The key design trade-off is bandwidth versus power and noise: a wider amplifier does not automatically improve the complete receiver if quantization, filtering, or antenna constraints dominate.

💊

Medical and Industrial Imaging

The THS4021CD is appropriate for imaging front ends that need to amplify rapidly changing sensor or electrode signals without adding excessive voltage noise. Its 350 MHz bandwidth and 470 V/us slew rate support high-bandwidth analog paths, including sensor readout and preamplifier stages operating at moderate or high gain. The single-channel format is useful where only one signal must be conditioned close to the sensor, reducing routing between amplifier stages. Designers should account for sensor capacitance, cable length, gain-bandwidth requirements, and output-swing limits. High-speed layout is essential: return the feedback components close to the pins, avoid long traces around the sensitive input, and provide local bypass capacitance to prevent supply impedance from disturbing the signal.

🖥️

High-Speed Instrumentation

The THS4021CD can be used in instrumentation requiring wider bandwidth than conventional precision amplifiers provide. Its 350 MHz bandwidth makes it useful for buffer and active-filter stages handling fast transients, while the 470 V/us slew rate reduces the likelihood of slew-rate limiting on demanding edges. Instrumentation designs should still verify input noise, offset, bias current, and output-current limits against the measurement bandwidth and source resistance. Keep the feedback network compact and terminate unused channels according to the manufacturer guidance rather than leaving high-impedance inputs floating. The performance trade-off is that a high-speed amplifier may consume more power and provide less precision near DC than a dedicated precision op amp.

🔧

Oscilloscope and Test Signal Paths

The THS4021CD is suitable for high-speed test and measurement paths that must amplify pulses, edges, or low-amplitude waveforms without obvious bandwidth limitation. The combination of 350 MHz small-signal bandwidth and 470 V/us slew rate allows it to preserve rapid transitions when operated at a compatible gain and load. In a measurement instrument, the amplifier may buffer a source, drive a converter, or form an active analog filter. Check the source impedance and capacitive loading because they can interact with the feedback network and alter stability or pulse shape. Use short, controlled-impedance interconnects and decouple each supply rail near the device to maintain predictable behavior across the complete measurement bandwidth.

📺

Active Filtering and Waveform Conditioning

The THS4021CD can implement high-speed active filters or waveform-conditioning stages because its 350 MHz bandwidth and 470 V/us slew rate provide response beyond the range of many general-purpose amplifiers. It is particularly relevant when filtering or shaping fast pulses while keeping rise times and transient behavior predictable. Component tolerances, parasitic capacitance, and amplifier stability become more important as operating frequency increases, so the feedback and compensation parts should be placed directly beside the relevant pins. Evaluate the complete filter response rather than relying only on nominal bandwidth. The device trades low-level precision for speed, making it more appropriate for signal-shape enhancement than for demanding DC or low-frequency measurements.

⚡

High-Speed Signal Buffering

The THS4021CD is useful as a single-channel buffer when driving downstream circuitry through a cable, connector, converter input, or another stage with appreciable capacitive loading. Its 350 MHz bandwidth and 470 V/us slew rate provide more than enough response for many high-speed signals, while the voltage-feedback configuration supports conventional feedback compensation. Output loading and stability must be checked with the actual source and sink, including cable capacitance and connector parasitics. Keep output routing short, provide a nearby return path, and avoid excessive feedback capacitance that can reduce bandwidth or cause peaking. When low-frequency precision dominates and bandwidth is unnecessary, a lower-power precision amplifier may offer a better overall efficiency and accuracy tradeoff.

What is the key specification of THS4021CD?
The THS4021CD is a single-channel voltage-feedback amplifier with 350 MHz bandwidth, a 470 V/us slew rate, and an 8-pin SOIC package. According to the Texas Instruments product page, the THS4021 family is designed for ultra-low-noise, high-speed signal conditioning. These specifications make the device appropriate for communications, imaging, instrumentation, and buffer circuits requiring fast small-signal performance.
How fast is the THS4021CD amplifier?
The THS4021CD provides 350 MHz bandwidth and a slew rate of 470 V/us. According to the Texas Instruments product information, these figures describe its high-speed small-signal behavior and ability to follow rapidly changing waveforms. Actual usable bandwidth also depends on the selected closed-loop gain, feedback network, source impedance, PCB parasitics, output loading, and the required amplitude.
What supply voltage does THS4021CD use?
The THS4021CD operates from plus or minus 16 V, equivalent to a 32 V total supply span. The Texas Instruments ordering information identifies the device as an 8-SOIC operational amplifier for instrumentation and signal buffering. Designers should use a supply arrangement consistent with the manufacturer specifications and verify input and output voltage limits against the signal amplitude at the selected gain.
Where can I download the THS4021CD datasheet?
The official THS4021 product and support page on the Texas Instruments website is the preferred starting point for the THS4021CD datasheet, ordering information, and family documentation. The manufacturer identifies THS4021CD as the 8-pin SOIC ordering option. Use the pin-description table and electrical-characteristics tables in the manufacturer datasheet when assigning PCB connections and verifying application limits.
Where can I find the THS4021CD pinout?
The THS4021CD pinout is assigned in the pin-description table of the Texas Instruments THS4021 manufacturer datasheet. The verified ordering information confirms an 8-pin SOIC package, but it does not reproduce the complete numbered pin list. Use the manufacturer diagram for exact signal, power, and no-connect assignments rather than relying on a generic 8-pin amplifier drawing.
Where can I buy THS4021CD online?
The THS4021CD can be requested through the Request a Quote form on this page. Submit the exact MPN THS4021CD and specify the required quantity, shipment destination, and delivery expectations. This approach preserves exact-part traceability and allows the request to be matched to current component availability without substituting a different ordering code.
What is the price of THS4021CD?
Current THS4021CD pricing is obtained through the Request a Quote form on this page. The product is an 8-pin SOIC single-channel voltage-feedback amplifier rated for 350 MHz bandwidth and 470 V/us slew rate. Include the required quantity and destination in the request so the quotation can reflect the appropriate exact-MPN sourcing channel and delivery requirement.
What is the lead time for THS4021CD?
The current THS4021CD lead time should be requested through the Request a Quote form on this page. Lead time depends on the requested quantity, inventory position, and destination, so a fixed interval should not be assumed for a high-speed amplifier order. Providing the forecast quantity and required delivery date allows the sourcing response to address the actual production plan.
Is THS4021CD in stock?
The current stock position for THS4021CD should be confirmed through the Request a Quote form on this page. The exact device is a Texas Instruments single-channel voltage-feedback amplifier in an 8-SOIC package with 350 MHz bandwidth. When requesting availability, identify THS4021CD by its complete MPN so tape-and-reel and tube handling codes are not mixed during allocation.
What is the difference between THS4021CD and THS4021IDG4?
THS4021CD is listed in an 8-SOIC package, while the comparison record identifies THS4021IDG4 as a different TI ordering variant whose package code is not the same SOIC footprint. Although both belong to the THS4021 family, a different package can change land-pattern compatibility and pin availability. Verify the THS4021IDG4 package drawing before treating it as a board-level replacement.
What is the difference between THS4021CD and THS4021CDR?
THS4021CD and THS4021CDR identify the same THS4021 device family with an 8-SOIC electrical package, but the final ordering code can denote a different shipping or carrier representation. For PCB replacement purposes, the SOIC land pattern remains the key constraint. Confirm the manufacturer ordering table for handling-method details before substituting one ordering code for another.
When should I choose THS4021CD over a lower-bandwidth amplifier?
Choose THS4021CD when the signal path requires more bandwidth or faster edge response than a general-purpose amplifier can provide. Its 350 MHz bandwidth and 470 V/us slew rate are useful for high-frequency measurement, communications, imaging, and buffering. Choose a lower-bandwidth amplifier only when lower noise, lower power, lower cost, or closer-to-DC precision is more important than high-speed response.
Is THS4021CD suitable for imaging and instrumentation?
The THS4021CD is suitable for imaging and instrumentation signal paths that need high-speed, low-noise amplification. The Texas Instruments product information specifically identifies communications and imaging among the family’s target applications, while the verified device specification includes 350 MHz bandwidth and 470 V/us slew rate. Sensor bandwidth, cable capacitance, gain, and required output amplitude must still be evaluated together.
What can replace THS4021CD?
A verified drop-in replacement for THS4021CD must use the same 8-SOIC land pattern, preserve pin assignments, and remain electrically close to its 350 MHz bandwidth, 470 V/us slew rate, and plus-or-minus 16 V supply capability. The reviewed records do not establish a distinct cross-manufacturer part meeting all of those conditions. THS4021CDR is an ordering variant of the same device rather than a different amplifier.
What is the best cross-brand equivalent for THS4021CD?
No cross-brand drop-in equivalent for THS4021CD is established by the reviewed manufacturer and cross-reference records. A valid replacement must match the 8-SOIC footprint and pinout while maintaining comparable 350 MHz bandwidth, 470 V/us slew rate, voltage-noise performance, supply range, and stability at the intended gain. Use the Texas Instruments cross-reference search to request a qualified comparison before redesigning.
What are the key specifications of THS4021CD that engineers should know?
The principal THS4021CD specifications are single-channel voltage-feedback operation, 350 MHz bandwidth, 470 V/us slew rate, plus-or-minus 16 V operation, and an 8-SOIC package. The Texas Instruments product page identifies the THS4021 as an ultra-low-noise, high-speed amplifier family for communications and imaging. Gain-bandwidth product, input noise density, input bias current, and temperature limits should be taken directly from the relevant manufacturer tables.

Data referensi kejuruteraan untuk THS4021CD — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the THS4021CD when a single analog channel needs the combination of very high bandwidth, fast slew rate, and low voltage noise, particularly in communications, imaging, instrumentation, filtering, or signal-buffer circuits. The 350 MHz bandwidth and 470 V/us slew rate make it more appropriate than a general-purpose precision amplifier when fast edges and high-frequency content must be preserved. Select a lower-bandwidth or lower-noise precision device when DC accuracy, offset, power efficiency, or minimum-noise operation dominates the design. A different-package TI family member should not be treated as a direct board replacement, and THS4021CDR is an ordering variant rather than a different amplifier. Confirm the exact pinout, supply limits, stable operating region, output loading, and manufacturer ordering information before approving a substitution or redesign.

Perbandingan dengan Gantian

Parametr Produk Ini
Brand Texas Instruments
Package 8-SOIC
Amplifier Type Voltage-feedback amplifier
Channel Count 1 channel
Bandwidth 350 MHz
Slew Rate 470 V/us
Supply Voltage plus or minus 16 V
Noise Class Ultra-low voltage noise
Primary Applications Communications, imaging, instrumentation, and buffering

Penyeberangsung Jelas

  • High-speed performance combined with ultra-low-noise positioning (vsGeneral-purpose 8-pin SOIC amplifiers)
  • Single-channel implementation in a compact 8-SOIC package (vsDual-channel high-speed amplifier packages)
  • Wide high-speed operating capability (vsLower-bandwidth precision amplifiers)

Catatan Desain

Treat the PCB as part of the high-speed circuit. Place input, feedback, and compensation components directly beside their associated amplifier pins, and avoid routing the sensitive input over split or shared return paths. Keep traces short, use a continuous ground plane, and avoid adding test-point stubs that create unnecessary capacitance. Because the device offers 350 MHz bandwidth and 470 V/us slew rate, interconnect parasitics can affect stability and transient response even when the schematic appears correct.

Use low-impedance local decoupling for each supply connection and keep the bypass capacitor and its return path as close to the device as practical. The verified operating range extends to plus or minus 16 V, but allowable input common-mode and output swing must remain within the manufacturer limits for the selected signal and gain. Confirm the source rails’ impedance at high frequency and use a stable reference or filtering arrangement if the amplifier shares supply infrastructure with fast digital circuitry.

Do not select the amplifier from bandwidth alone. Match the closed-loop gain, feedback impedance, source impedance, capacitive load, and required output amplitude, then verify noise and stability over the intended frequency range. A 470 V/us slew rate cannot compensate for excessive gain, overloaded outputs, or an unsuitable gain-setting network. Confirm the complete signal chain in simulation or measurement before production release.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The verified product information does not provide explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements. The THS4021CD is an operational amplifier rather than an automotive-qualified device, so AEC-Q100 is marked not applicable.

Data disahkan pada: 2026-11-10 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

THS4021CD datasheet THS4021CD pinout THS4021CD datasheet pdf THS4021CD 350 MHz amplifier THS4021CD 470 V/us slew rate THS4021CD 8-SOIC package THS4021CD voltage feedback amplifier THS4021CD imaging amplifier THS4021CD communications signal conditioning THS4021CD instrumentation application circuit THS4021CD equivalent THS4021CD replacement THS4021CD cross reference THS4021CD price Texas Instruments THS4021CD

Komponen dan Tanda berkaitan

Texas Instruments THS4021CD THS4021 THS4021CDR THS4021IDG4 voltage-feedback amplifier VFA operational amplifier analog signal conditioning small-signal bandwidth slew rate input-referred voltage noise feedback network 8-SOIC SOIC package family surface-mount package communications receiver medical imaging industrial imaging oscilloscope input path active filter signal buffer gain-bandwidth product Texas Instruments cross-reference search
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ