TLV2324IN - 8V 85kHz Quad Op Amp | Texas Instruments
MPN: TLV2324IN ✓ AktifTLV2324IN Ringkasan
An operational amplifier, or op amp, is a voltage-controlled differential amplifier used to amplify, buffer, filter, or compare small signals. The TLV2324 belongs to the broader CMOS operational-amplifier family and is intended for embedded, portable, battery-powered, and low-voltage instrumentation systems. Its quad configuration provides four amplifiers in one package while reducing board area and system component count.
The TLV2324 is specified for operation from a single supply as high as 8 V, with operation characterized at 3 V and 5 V. Its input common-mode voltage range extends below the negative supply rail and up to the positive supply rail, making it useful for low-voltage sensor interfaces. The device also supports output-voltage operation close to the supply rails, which improves signal swing in compact analog systems.
The TLV2324IN uses a CMOS operational-amplifier architecture optimized for low-voltage, low-power operation. The 85 kHz gain-bandwidth product is suitable for signal-conditioning tasks requiring modest bandwidth rather than high-speed waveform processing. Because the amplifier operates from low supply voltages and is optimized for low power, it is particularly appropriate for portable measurement, battery-powered instrumentation, and low-voltage embedded systems.
Typical applications include low-voltage sensor conditioning, portable medical and industrial instrumentation, audio signal paths, current or voltage monitoring, and general-purpose analog signal processing. The 14-pin PDIP package is useful for through-hole prototyping, educational designs, and industrial assemblies where a socketed or leaded package simplifies inspection and servicing.
Designers should account for the device's low-voltage supply limits, confirm the usable input and output common-mode range for the selected supply voltage, and place bypass capacitors close to the supply pins. Input and output signals must remain within the device's absolute maximum ratings, and the unused amplifier in a quad package must be configured according to the manufacturer pin description.
This page provides a focused engineering view of the TLV2324IN, including the principal operating limits, application guidance, package considerations, and clearly qualified drop-in alternatives. It is intended to help engineers determine whether a quad low-voltage CMOS amplifier is appropriate for a specific analog design before beginning board-level implementation.
Pilihan pengganti yang segera untuk TLV2324IN — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
TLV2324INE4
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
TLV2324IP
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
TLV2324AIP
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
TLV2324AINE4
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
TLV2324IPR
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
TLV2324IN Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | Quad CMOS operational amplifier |
| Number of Amplifiers | 4 circuits |
| Maximum Supply Voltage | 8 V |
| Tegangan Pemberi Arus Operasi | 3 V to 5 V characterized; up to 8 V maximum |
| Gain-Bandwidth Product | 85 kHz |
| Input Common-Mode Range | Extends below the negative rail and up to VDD |
| Gambaran Tegangan Output | Includes negative rail; upper range depends on supply and load |
| Kemasan | 14-PDIP |
| Lead Pitch | 7.62 mm |
| Jenis Pemasangan | Through-hole |
Panduan Konfigurasi Pin TLV2324IN 14-pdip
Konfigurasi pin untuk TLV2324IN (14-pdip pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.
Tiada data garisan pin yang diperoleh untuk TLV2324IN.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
TLV2324IN patut untuk 6 aplikasis: Low-Voltage Sensor Signal Conditioning, Portable Instrumentation, Battery-Powered Monitoring Systems, Industrial Control and Threshold Detection, Audio and Low-Frequency Analog Paths, Education and Through-Hole Prototyping.
Low-Voltage Sensor Signal Conditioning
The TLV2324IN fits sensor-amplifier and buffer stages that operate from a 3 V or 5 V single supply. Its input common-mode range extends below the negative rail and up to VDD, allowing the device to work with signals near the supply rails when the output range permits. The 85 kHz gain-bandwidth product supports modest-bandwidth conditioning, while the four-amplifier package can provide gain, filtering, and buffering in one 14-pin PDIP. Keep input signals within the datasheet limits and verify output swing against the selected load.
Disebarkan
Portable Instrumentation
Portable measurement instruments often operate from low-capacity batteries and require several analog channels without a large analog footprint. The TLV2324IN provides four CMOS amplifiers in a 14-pin PDIP package, with operation characterized at 3 V and 5 V. It is appropriate for amplifying, buffering, and comparing low-frequency measurement signals. The designer should verify quiescent current, input offset, noise, and output drive against the instrumentation accuracy and power targets before finalizing the circuit.
Disebarkan
Battery-Powered Monitoring Systems
The TLV2324IN is suitable for battery-powered monitoring circuits that need multiple analog functions on a low-voltage rail. Its low-voltage CMOS architecture and 85 kHz bandwidth are useful for slowly changing sensor signals rather than high-speed waveforms. Four channels can monitor separate inputs, provide active filtering, or create comparator thresholds within one package. Confirm the total supply current, input bias behavior, and common-mode operating range for the specific battery voltage and sensor interface.
Disebarkan
Industrial Control and Threshold Detection
The TLV2324IN can implement four independent threshold detectors or control-signal conditioners in a low-voltage industrial control board. Its CMOS input stage and rail-to-rail-oriented common-mode capability help handle signals near the supply range, while the quad architecture reduces wiring complexity compared with four separate single amplifiers. Use appropriate hysteresis and filtering for noisy industrial nodes, and verify the comparator function, output logic levels, and propagation behavior in the final design.
Disebarkan
Audio and Low-Frequency Analog Paths
The TLV2324IN can provide low-frequency preamplification and buffering for compact audio or communication equipment powered from a 3 V or 5 V source. Its 85 kHz gain-bandwidth product is adequate for many audio subbands but should not be assumed suitable for full-range high-fidelity audio without checking gain, slew rate, distortion, and output-load specifications. The quad package can also implement active filters or additional buffer stages, reducing the number of separate analog components on the board.
Disebarkan
Education and Through-Hole Prototyping
The 14-pin PDIP package makes the TLV2324IN convenient for educational prototypes, breadboard-based instrument builds, and through-hole industrial assemblies. Four amplifiers allow students or engineers to construct gain stages, filters, comparators, and buffers while learning basic analog design. Because the device is optimized for low-voltage single-supply systems, supply decoupling, common-mode range, and output-swing checks remain important. Use the manufacturer pin drawing when assigning connections.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk TLV2324IN — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | TLV2324INE4 | TLV2324IP | TLV2324AIP | TLV2324AINE4 | TLV2324IPR |
|---|---|---|---|---|---|---|
| Package | 14-PDIP | 14-PDIP | 14-PDIP | 14-PDIP | 14-PDIP | 14-PDIP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Amplifier Count | 4 | 4 | 4 | 4 | 4 | 4 |
| Special Suffix | IN | INE4 | IP | AIP | AINE4 | IPR |
Penyeberangsung Jelas
- Quad integration in a standard through-hole package (vsTLV2324INE4)
- Low-voltage single-supply optimization (vsTLV2324AIP)
- Moderate bandwidth for general analog conditioning (vsTLV2324IPR)
Catatan Desain
Design the supply rail around the 8 V maximum and the characterized 3 V or 5 V operating points. Place the supply bypass capacitor close to the device power pins and use a low-impedance ground return. Because the family is intended for low-voltage single-supply operation, verify input common-mode limits and output swing for the actual rail rather than assuming full rail-to-rail behavior under every load condition.
Use the 14-pin PDIP footprint exactly as shown in the manufacturer package drawing. Keep analog input traces away from switching nodes and power-converter inductors, and route the ground return directly to the device ground pin. For long sensor cables, add protection and filtering at the connector so transients do not reach the amplifier input. Confirm the final pin assignment using the TLV2324 datasheet pin-description table.
Do not treat the quad package as four identical single-amplifier boards without checking the electrical limits and unused-channel recommendations for each suffix. Avoid leaving unused inputs floating, and check that source and sink current remain within the output-drive limits. The 85 kHz gain-bandwidth product also means that large closed-loop gains reduce available bandwidth, so stability and signal-bandwidth checks belong in the design review.
In a 14-pin PDIP, the amplifier is normally not the main thermal limitation at low voltage, but package temperature still rises with dissipation. Estimate the worst-case dissipation using the actual supply voltage, output voltage, load current, and the number of active channels, then check the resulting junction-temperature margin against the device rating. Avoid placing the through-hole device next to a high-temperature regulator without confirming the ambient conditions.
Maklumat Kesediaan
Compliance information is not explicitly identified in the product-page and distributor results. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status in the manufacturer product documentation for the exact ordered suffix.