Texas Instruments

TLV2324IN - 8V 85kHz Quad Op Amp | Texas Instruments

MPN: TLV2324IN ✓ 啟用中
8 V Vdss 14-PDIP Package
MOQ: 1 |

TLV2324IN 概覽

The Texas Instruments TLV2324IN is a quad, low-voltage, low-power CMOS operational amplifier with an 8 V maximum supply voltage, 85 kHz gain-bandwidth product, and four amplifiers in a 14-pin PDIP package. It is designed for low-voltage single-supply systems where low power consumption, rail-to-rail input operation, and compact integration are important.

An operational amplifier, or op amp, is a voltage-controlled differential amplifier used to amplify, buffer, filter, or compare small signals. The TLV2324 belongs to the broader CMOS operational-amplifier family and is intended for embedded, portable, battery-powered, and low-voltage instrumentation systems. Its quad configuration provides four amplifiers in one package while reducing board area and system component count.

The TLV2324 is specified for operation from a single supply as high as 8 V, with operation characterized at 3 V and 5 V. Its input common-mode voltage range extends below the negative supply rail and up to the positive supply rail, making it useful for low-voltage sensor interfaces. The device also supports output-voltage operation close to the supply rails, which improves signal swing in compact analog systems.

The TLV2324IN uses a CMOS operational-amplifier architecture optimized for low-voltage, low-power operation. The 85 kHz gain-bandwidth product is suitable for signal-conditioning tasks requiring modest bandwidth rather than high-speed waveform processing. Because the amplifier operates from low supply voltages and is optimized for low power, it is particularly appropriate for portable measurement, battery-powered instrumentation, and low-voltage embedded systems.

Typical applications include low-voltage sensor conditioning, portable medical and industrial instrumentation, audio signal paths, current or voltage monitoring, and general-purpose analog signal processing. The 14-pin PDIP package is useful for through-hole prototyping, educational designs, and industrial assemblies where a socketed or leaded package simplifies inspection and servicing.

Designers should account for the device's low-voltage supply limits, confirm the usable input and output common-mode range for the selected supply voltage, and place bypass capacitors close to the supply pins. Input and output signals must remain within the device's absolute maximum ratings, and the unused amplifier in a quad package must be configured according to the manufacturer pin description.

This page provides a focused engineering view of the TLV2324IN, including the principal operating limits, application guidance, package considerations, and clearly qualified drop-in alternatives. It is intended to help engineers determine whether a quad low-voltage CMOS amplifier is appropriate for a specific analog design before beginning board-level implementation.

直接替換替代品,適用於 TLV2324IN — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

TLV2324INE4

✅ 直接替換
📦 14-PDIP
Same TLV2324 family and 14-pin PDIP footprint; suffix-specific qualification terms require verification

📋 參考替代品(不在目錄中)

TLV2324IP

✅ 直接替換 ⚠️ 規格未經驗證
📦 14-PDIP
Same TLV2324 family and 14-pin PDIP footprint; orderable suffix differs

📋 參考替代品(不在目錄中)

TLV2324AIP

✅ 直接替換 ⚠️ 規格未經驗證
📦 14-PDIP
Same TLV2324 family and 14-pin PDIP footprint; exact electrical limits require suffix-specific comparison

📋 參考替代品(不在目錄中)

TLV2324AINE4

✅ 直接替換 ⚠️ 規格未經驗證
📦 14-PDIP
Same TLV2324 family and 14-pin PDIP footprint; suffix-specific qualification and limits require verification

📋 參考替代品(不在目錄中)

TLV2324IPR

✅ 直接替換 ⚠️ 規格未經驗證
📦 14-PDIP
Same TLV2324 family and 14-pin PDIP footprint; tape-and-reel orderable suffix differs

📋 參考替代品(不在目錄中)

TLV2324IN 最大額定值與電氣特性

Product Type Quad CMOS operational amplifier
Number of Amplifiers 4 circuits
Maximum Supply Voltage 8 V
工作電源電壓 3 V to 5 V characterized; up to 8 V maximum
Gain-Bandwidth Product 85 kHz
Input Common-Mode Range Extends below the negative rail and up to VDD
輸出電壓範圍 Includes negative rail; upper range depends on supply and load
封裝 14-PDIP
Lead Pitch 7.62 mm
安裝類型 Through-hole

TLV2324IN 14-pdip 腳位配置指南

TLV2324IN(14-pdip 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

TLV2324IN 的 14-pdip 封裝腳位圖

無詳細腳位定義資料: TLV2324IN.

請參閱 資料表 以查看完整腳位配置。

典型應用

TLV2324IN 適用於 6 應用s: Low-Voltage Sensor Signal Conditioning, Portable Instrumentation, Battery-Powered Monitoring Systems, Industrial Control and Threshold Detection, Audio and Low-Frequency Analog Paths, Education and Through-Hole Prototyping.

🧩

Low-Voltage Sensor Signal Conditioning

The TLV2324IN fits sensor-amplifier and buffer stages that operate from a 3 V or 5 V single supply. Its input common-mode range extends below the negative rail and up to VDD, allowing the device to work with signals near the supply rails when the output range permits. The 85 kHz gain-bandwidth product supports modest-bandwidth conditioning, while the four-amplifier package can provide gain, filtering, and buffering in one 14-pin PDIP. Keep input signals within the datasheet limits and verify output swing against the selected load.

📱

Portable Instrumentation

Portable measurement instruments often operate from low-capacity batteries and require several analog channels without a large analog footprint. The TLV2324IN provides four CMOS amplifiers in a 14-pin PDIP package, with operation characterized at 3 V and 5 V. It is appropriate for amplifying, buffering, and comparing low-frequency measurement signals. The designer should verify quiescent current, input offset, noise, and output drive against the instrumentation accuracy and power targets before finalizing the circuit.

⚡

Battery-Powered Monitoring Systems

The TLV2324IN is suitable for battery-powered monitoring circuits that need multiple analog functions on a low-voltage rail. Its low-voltage CMOS architecture and 85 kHz bandwidth are useful for slowly changing sensor signals rather than high-speed waveforms. Four channels can monitor separate inputs, provide active filtering, or create comparator thresholds within one package. Confirm the total supply current, input bias behavior, and common-mode operating range for the specific battery voltage and sensor interface.

🏭

Industrial Control and Threshold Detection

The TLV2324IN can implement four independent threshold detectors or control-signal conditioners in a low-voltage industrial control board. Its CMOS input stage and rail-to-rail-oriented common-mode capability help handle signals near the supply range, while the quad architecture reduces wiring complexity compared with four separate single amplifiers. Use appropriate hysteresis and filtering for noisy industrial nodes, and verify the comparator function, output logic levels, and propagation behavior in the final design.

🎧

Audio and Low-Frequency Analog Paths

The TLV2324IN can provide low-frequency preamplification and buffering for compact audio or communication equipment powered from a 3 V or 5 V source. Its 85 kHz gain-bandwidth product is adequate for many audio subbands but should not be assumed suitable for full-range high-fidelity audio without checking gain, slew rate, distortion, and output-load specifications. The quad package can also implement active filters or additional buffer stages, reducing the number of separate analog components on the board.

🔧

Education and Through-Hole Prototyping

The 14-pin PDIP package makes the TLV2324IN convenient for educational prototypes, breadboard-based instrument builds, and through-hole industrial assemblies. Four amplifiers allow students or engineers to construct gain stages, filters, comparators, and buffers while learning basic analog design. Because the device is optimized for low-voltage single-supply systems, supply decoupling, common-mode range, and output-swing checks remain important. Use the manufacturer pin drawing when assigning connections.

推薦產品摘要

TLV2324IN Texas Instruments 用於: Low-Voltage Sensor Signal Conditioning, Portable Instrumentation, Battery-Powered Monitoring Systems, Industrial Control and Threshold Detection, Audio and Low-Frequency Analog Paths, Education and Through-Hole Prototyping TLV2324INE4 Same-family alternative for ordering qualification review 用於: Low-Voltage Sensor Signal Conditioning, Education and Through-Hole Prototyping TLV2324IP Same-family quad alternative 用於: Portable Instrumentation TLV2324AIP Same-family alternative for comparison 用於: Battery-Powered Monitoring Systems TLV2324AINE4 Same-family alternative for qualification review 用於: Industrial Control and Threshold Detection TLV2324IPR Same-family alternative with different orderable suffix 用於: Audio and Low-Frequency Analog Paths
What is the TLV2324IN?
The TLV2324IN is a Texas Instruments quad CMOS operational amplifier designed for low-voltage, low-power applications. According to the Texas Instruments product page, the TLV2324 family supports an 8 V maximum supply and operates at 85 kHz gain-bandwidth. The TLV2324IN is supplied in a 14-pin PDIP package and provides four amplifiers in one through-hole package, making it useful for low-voltage signal conditioning, buffering, filtering, and comparison circuits.
What is the operating voltage of TLV2324IN?
The TLV2324IN supports supply operation up to 8 V, with 3 V and 5 V single-supply operation fully characterized by the manufacturer. The device is intended for low-voltage systems rather than high-voltage operation. When designing a 3 V or 5 V circuit, check the input common-mode range and output swing against the actual supply voltage and load before using the amplifier near a rail.
Where can I download the TLV2324IN datasheet PDF?
The official TLV2324IN datasheet is available through the Texas Instruments product page for the TLV2324 family at https://www.ti.com/product/TLV2324. The product page provides the manufacturer datasheet and ordering information. Use the manufacturer PDF for pin assignments, electrical characteristics, recommended operating conditions, and package drawings when designing a board.
Where can I find the TLV2324IN pinout?
The TLV2324IN pinout is shown in the manufacturer datasheet for the TLV2324 family, available from the Texas Instruments product page at https://www.ti.com/product/TLV2324. The component uses a 14-pin PDIP package with four CMOS operational amplifiers. When assigning PCB tracks, use the pin-description table and package drawing in the datasheet to identify supply, input, output, and unused-amplifier connections.
Is the TLV2324IN suitable for 3 V and 5 V single-supply designs?
Yes. The TLV2324IN is specifically characterized for 3 V and 5 V single-supply operation, while the family is specified for supply voltages up to 8 V. Its input common-mode range extends below the negative rail and up to VDD, which is useful for low-level sensor signals. Verify the required signal range and output load against the electrical characteristics for the selected supply.
What are the key specifications of TLV2324IN that engineers should know?
The principal TLV2324IN specifications are four amplifiers per package, 8 V maximum supply voltage, 85 kHz gain-bandwidth product, 3 V and 5 V single-supply characterization, and a 14-pin PDIP package. The CMOS design is aimed at low-voltage and low-power systems. These values make the device suitable for general-purpose low-speed analog conditioning, but not for high-speed signal capture.
What is the TLV2324IN used for?
The TLV2324IN is used for low-voltage analog signal conditioning, including sensor amplification, voltage buffering, filtering, comparisons, and current or voltage monitoring. Its quad configuration allows four related amplifier functions to be implemented in one 14-pin PDIP package. The 85 kHz bandwidth supports modest-frequency signals and general instrumentation rather than high-speed communications or video amplification.
What can replace the TLV2324IN?
The TLV2324INE4 is a qualified same-brand drop-in candidate because it belongs to the TLV2324 family and retains the same 14-pin PDIP footprint and functional organization. The most important replacement check is not only the package and pin arrangement, but also supply voltage, bandwidth, common-mode range, quiescent current, and output drive. Use the manufacturer datasheet for each ordered suffix before approving a substitution.
Is the TLV2324IN the same as the TLV2324INE4?
The TLV2324IN and TLV2324INE4 are members of the same Texas Instruments TLV2324 family, and the cross-reference data identifies both as quad low-voltage CMOS operational amplifiers in the 14-pin PDIP format. Their ordered suffix may indicate different qualification or grade terms, so the exact electrical limits and qualification status should be checked in the manufacturer ordering information before substitution.
When should I choose TLV2324IN over a single-amplifier alternative?
Choose the TLV2324IN when a design needs four amplifiers and can use a through-hole quad package to reduce component count and board wiring. It is particularly useful for low-voltage sensor boards, instrumentation, and prototypes with several gain or buffering stages. A single-amplifier package may be preferable when only one channel is required, PCB area is severely constrained, or the required electrical specifications exceed the TLV2324 family limits.
Is TLV2324IN suitable for portable and battery-powered equipment?
The TLV2324IN is a candidate for portable and battery-powered equipment because the TLV2324 family is designed for low-voltage, low-power operation. The manufacturer specifically characterizes the family at 3 V and 5 V single supply. Final suitability depends on the actual quiescent current, output drive, required bandwidth, and total system power budget, which should be evaluated from the datasheet.
What is the lead time for TLV2324IN?
Current lead time for TLV2324IN should be confirmed through the Request a Quote form on this page, including the required quantity, package suffix, and delivery target. The Texas Instruments product page provides ordering and quality information, while distributor search results can change rapidly. Do not base a production schedule on an unconfirmed inventory count or estimated delivery interval.
Where can I buy TLV2324IN online?
The TLV2324IN can be requested through the Request a Quote form on this page. The request should state the exact MPN, quantity, and required packaging or delivery terms. The manufacturer product page and authorized distribution channels can confirm current lifecycle, stock, and commercial status, but availability should be checked for the exact 14-PDIP ordering configuration.
What is the price of TLV2324IN?
The current commercial price for TLV2324IN should be obtained through the Request a Quote form on this page. The request can specify quantity, delivery location, and desired packaging so the quotation reflects the exact TLV2324IN configuration. Pricing can change with inventory and order quantity, so a project budget should use the current quotation rather than a historical listing value.
How should unused TLV2324IN amplifier channels be connected?
The unused amplifier channels in the TLV2324IN must be wired according to the manufacturer pin-description table and application guidance in the datasheet. The TLV2324 is a quad device, so each channel has separate input and output pins within the 14-pin PDIP. Do not leave an unused amplifier floating without following the manufacturer’s recommended configuration for stability and noise performance.

工程參考資料,適用於 TLV2324IN — 比較、設計指引及合規資訊。

選型指南

Choose TLV2324IN when your design needs four low-voltage CMOS amplifiers and a 14-pin PDIP package, particularly in 3 V or 5 V single-supply signal-conditioning circuits. TLV2324INE4 is the closest same-family candidate when its suffix-specific qualification and ordering terms fit the project. TLV2324IP and TLV2324IPR provide the same general family architecture in equivalent package formats, while TLV2324AIP and TLV2324AINE4 should be selected only after checking the A-variant electrical limits. None of these parts should be assumed to replace the target without reviewing the manufacturer datasheet for supply range, quiescent current, input offset, bandwidth, output drive, and temperature limits. For new high-speed, high-precision, or automotive requirements, verify whether this micropower quad family meets the system requirements rather than selecting it only by package compatibility.

與替代品比較

參數 本產品 TLV2324INE4 TLV2324IP TLV2324AIP TLV2324AINE4 TLV2324IPR
Package 14-PDIP 14-PDIP 14-PDIP 14-PDIP 14-PDIP 14-PDIP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Amplifier Count 4 4 4 4 4 4
Special Suffix IN INE4 IP AIP AINE4 IPR

主要差異化特點

  • Quad integration in a standard through-hole package (對比TLV2324INE4)
  • Low-voltage single-supply optimization (對比TLV2324AIP)
  • Moderate bandwidth for general analog conditioning (對比TLV2324IPR)

設計說明

Design the supply rail around the 8 V maximum and the characterized 3 V or 5 V operating points. Place the supply bypass capacitor close to the device power pins and use a low-impedance ground return. Because the family is intended for low-voltage single-supply operation, verify input common-mode limits and output swing for the actual rail rather than assuming full rail-to-rail behavior under every load condition.

Use the 14-pin PDIP footprint exactly as shown in the manufacturer package drawing. Keep analog input traces away from switching nodes and power-converter inductors, and route the ground return directly to the device ground pin. For long sensor cables, add protection and filtering at the connector so transients do not reach the amplifier input. Confirm the final pin assignment using the TLV2324 datasheet pin-description table.

Do not treat the quad package as four identical single-amplifier boards without checking the electrical limits and unused-channel recommendations for each suffix. Avoid leaving unused inputs floating, and check that source and sink current remain within the output-drive limits. The 85 kHz gain-bandwidth product also means that large closed-loop gains reduce available bandwidth, so stability and signal-bandwidth checks belong in the design review.

In a 14-pin PDIP, the amplifier is normally not the main thermal limitation at low voltage, but package temperature still rises with dissipation. Estimate the worst-case dissipation using the actual supply voltage, output voltage, load current, and the number of active channels, then check the resulting junction-temperature margin against the device rating. Avoid placing the through-hole device next to a high-temperature regulator without confirming the ambient conditions.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

Compliance information is not explicitly identified in the product-page and distributor results. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status in the manufacturer product documentation for the exact ordered suffix.

相關搜尋

TLV2324IN datasheet TLV2324IN pinout TLV2324IN datasheet pdf TLV2324IN equivalent TLV2324IN replacement TLV2324IN cross reference TLV2324IN vs TLV2324INE4 TLV2324IN 8V 85kHz op amp TLV2324IN 14-PDIP TLV2324IN low voltage amplifier Texas Instruments TLV2324IN TLV2324IN price TLV2324IN stock TLV2324IN application circuit

相關元件與詞彙

Texas Instruments TLV2324IN TLV2324 TLV2324INE4 TLV2324IP TLV2324AIP TLV2324AINE4 TLV2324IPR operational amplifier quad amplifier CMOS amplifier low-voltage amplifier low-power amplifier analog signal conditioning single-supply operation gain-bandwidth product common-mode input voltage range quiescent current output voltage swing 14-PDIP package through-hole package portable instrumentation sensor interface Texas Instruments product page
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情