Texas Instruments

TLV2462CP - Dual 6.4MHz RRIO Op Amp | Texas Instruments

MPN: TLV2462CP ✓ Aktif
6 V Vdss 500 µA/channel Id 8-pin PDIP (P) Package
MOQ: 1 |

TLV2462CP Ringkasan

Texas Instruments TLV2462CP is a dual, 6.4 MHz, rail-to-rail input/output operational amplifier designed for low-power, portable signal-processing systems. The device operates from a 6 V maximum supply, provides two amplifier channels, and is packaged as an 8-pin PDIP. It combines a 500 µA-per-channel supply current with approximately 80 mA output-drive capability, making it suitable for battery-powered instrumentation, sensor interfaces, audio paths, and general-purpose analog processing.

A rail-to-rail input/output operational amplifier is an amplifier whose input common-mode range and output voltage swing can operate close to the positive and negative supply rails. This rail-to-rail, or RRIO, architecture belongs to the operational-amplifier hierarchy within analog and mixed-signal ICs. It is especially useful when signal levels approach the available supply voltage or when the input source can vary across most of the system voltage range.

The TLV2462CP provides 6.4 MHz gain-bandwidth product, rail-to-rail input and output behavior, and approximately 500 µA supply current per channel. Its 80 mA output-drive capability gives designers more margin when driving a load, sampling network, or downstream circuit. The dual-channel configuration provides two amplifiers in one package, reducing board area when a design needs matched signal-conditioning paths.

Technically, the device is positioned as a low-power, general-purpose RRIO amplifier. Its 6.4 MHz bandwidth supports higher-frequency signal paths than a conventional low-frequency precision amplifier, while the approximately 500 µA per-channel current supports portable equipment. Because input offset voltage, noise density, slew rate, common-mode range, and shutdown behavior are not stated in the product results, those characteristics should be confirmed in the manufacturer datasheet before finalizing a precision or noise-sensitive design.

Typical uses include portable sensor conditioning, low-level signal amplification, active filtering, audio preamplification, data acquisition, and general buffering. The dual channels can support paired signal paths, such as differential signal conditioning or simultaneous sensing and filtering. Through-hole PDIP construction can also simplify prototyping, educational builds, repair, and manual assembly where surface-mount packages are inconvenient.

The primary design consideration is supply and output-range planning. Confirm that the input source remains within the amplifier's common-mode range, that the required output amplitude stays inside the output-swing limits, and that the connected load does not exceed the available drive capability. Place bypass capacitors close to the supply pins and use short feedback paths to limit parasitic effects and preserve the intended response.

This product guide combines the manufacturer family specifications, package information, sourcing guidance, compatible alternatives, and practical design considerations. It is intended to help engineers identify whether the TLV2462CP's dual RRIO architecture, low-power operation, 6.4 MHz bandwidth, and PDIP package fit a new analog circuit before detailed design verification.

Pilihan pengganti yang segera untuk TLV2462CP — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera TLV2462CP (sama faktor bentuk dan kaki) — berbeza dalam Package, Amplifier Type, Mounting Type, Number of Channels, Input Common-Mode Range.

STMicroelectronics
Package: SOIC-8
Mounting Type: Surface Mount
Number of Channels: 2
Bandingkan Dengan TLV2462CP →
Texas Instruments
Package: 8-pin SOIC
Input Common-Mode Range: Rail-to-rail input
Bandingkan Dengan TLV2462CP →
Texas Instruments
Package: 8-pin SOIC
Amplifier Type: Operational Amplifier
Mounting Type: Surface Mount
Bandingkan Dengan TLV2462CP →

TLV2462IPE4

✅ Masuk Drop-In
📦 PDIP-8
Different ordering and temperature-grade suffix; the cited 6.4 MHz bandwidth and 2-channel architecture are retained, representing 0% bandwidth difference.

📋 Alternatif rujukan (tidak dalam katalog)

TLV2462CPE4

✅ Masuk Drop-In
📦 PDIP-8
Different ordering suffix; the available comparison lists the same 6.4 MHz bandwidth, 2 channels, and 8-pin PDIP configuration, representing 0% bandwidth difference.

📋 Alternatif rujukan (tidak dalam katalog)

TLV2462ID

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
Texas Instruments
📦 PDIP-8
Dual operational amplifier · 2 circuits · 6.4 MHz · 1.6 V/µs · 6 V · Rail-to-rail input · Rail-to-rail output

Hubungi untuk harga

Lihat Datasheet →

LMV358IDT

✅ Masuk Drop-In
STMicroelectronics
📦 PDIP-8
2 · 2.7 V to 5.5 V · 210 µA · 1.3 MHz · 0.45 V/µs · 1 mV (max) · 250 nA (max) · 0 V to VCC - 1.1 V

✓ Ada di Stok

$0.13 / Unit

Lihat Datasheet →

TLV2462CP Penilaian maksimum & Ciri-ciri Elektrik

Amplifier Type Dual operational amplifier
Number of Channels 2 channels
Maximum Supply Voltage 6 V
Gain-Bandwidth Product 6.4 MHz
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Supply Current per Channel 500 µA/channel
Output Drive Capability 80 mA
Low-Power Operation Low-power RRIO operational amplifier
Kemasan 8-pin PDIP (P)
Jenis Pemasangan Through-hole
Status RoHS Compliant

Panduan Konfigurasi Pin TLV2462CP 8-pin pdip (p)

Konfigurasi pin untuk TLV2462CP (8-pin pdip (p) pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai 8-pin pdip (p) untuk TLV2462CP

Tiada data garisan pin yang diperoleh untuk TLV2462CP.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

TLV2462CP patut untuk 6 aplikasis: Portable Sensor Signal Conditioning, Industrial Data Acquisition, Low-Noise Audio Preamplification, Active Filtering and Waveform Conditioning, Power and Control Signal Buffering, Prototyping and Repair Electronics.

📱

Portable Sensor Signal Conditioning

The TLV2462CP fits two-stage conditioning for portable sensors because its approximately 500 µA supply current per channel limits the amplifier's contribution to battery drain. The dual 6.4 MHz channels can amplify or buffer adjacent sensor signals while preserving small signal details across a broad frequency range. Rail-to-rail input operation is useful when sensor outputs move near either supply rail, while rail-to-rail output gives the next stage more usable voltage range. Confirm the input common-mode limits, output swing, and noise density in the manufacturer datasheet before selecting the gain and filter values.

🏭

Industrial Data Acquisition

The TLV2462CP is suitable for intermediate buffering in industrial data-acquisition systems that need two signal paths, a 6.4 MHz gain-bandwidth product, and relatively low channel current. One channel can condition a sensor or converter output while the other supports a reference, filter, or auxiliary signal path. Its approximately 80 mA output-drive capability provides more margin for moderate capacitive and resistive loads than a minimum-area micropower amplifier. Industrial use still requires validation against the actual temperature range, noise, offset, common-mode error, and electromagnetic environment.

🎧

Low-Noise Audio Preamplification

The TLV2462CP can serve as a dual audio preamplifier in portable and compact audio equipment because both input and output stages are designed for rail-to-rail operation. The two amplifiers can support left and right channels, or one channel can provide gain while the other buffers a control or headphone-driver path. Its 6.4 MHz gain-bandwidth product is ample for many audio-band tasks, while approximately 500 µA per channel supports low-power operation. Confirm input noise density, distortion, output swing, and load stability because those parameters are not stated in the product result.

🔧

Active Filtering and Waveform Conditioning

The TLV2462CP's 6.4 MHz gain-bandwidth product makes it appropriate for active filters and waveform-conditioning stages where ordinary low-frequency op amps may lack bandwidth. Its dual configuration can implement two independent filter sections or a cascaded second-order network. Rail-to-rail input and output behavior improves usable signal range in low-voltage systems, and the approximately 80 mA drive specification helps when the filter drives an ADC input or short cable. Check phase margin, capacitive loading, and gain-bandwidth interaction against the manufacturer's stability guidance.

⚡

Power and Control Signal Buffering

The TLV2462CP can buffer low-level control, feedback, and sensing signals in a power-control subsystem when the source impedance and output load are moderate. Its rail-to-rail input range supports signals approaching the supply limits, while the approximately 80 mA output-drive capability gives more load margin than a very low-power comparator-style buffer. The dual arrangement can process a command signal and a feedback signal independently. Verify stable operation with the actual load, cable capacitance, supply ripple, and feedback topology before deployment.

🔧

Prototyping and Repair Electronics

The TLV2462CP's 8-pin PDIP package makes it convenient for through-hole prototypes, educational circuits, repair work, and manually assembled instruments. The DIP footprint simplifies socket use and board-level replacement compared with a surface-mount package. Electrically, the device offers two independent 6.4 MHz RRIO channels with approximately 500 µA supply current per channel, so it can replace many general-purpose dual-amplifier layouts. Before soldering, confirm the eight-pin numbering from the manufacturer datasheet and verify that the replacement circuit does not rely on shutdown, offset, or temperature specifications unique to another grade.

What is the operating voltage of TLV2462CP?
The TLV2462CP operates from a supply up to 6 V and contains two amplifier channels. According to the Texas Instruments product page and manufacturer datasheet, the device is a 6 V, 6.4 MHz rail-to-rail input/output operational amplifier. Confirm the exact minimum, typical, and maximum supply limits and the usable input and output ranges in the datasheet before designing a rail-sensitive circuit.
What are the key specifications of TLV2462CP that engineers should know?
The TLV2462CP combines two channels, a 6.4 MHz gain-bandwidth product, rail-to-rail input and output operation, and approximately 500 µA of supply current per channel in an 8-pin PDIP package. The manufacturer describes it as a low-power, general-purpose RRIO operational amplifier. Its cited output-drive capability is approximately 80 mA, making it more suitable for moderate loads than purely micropower amplifiers.
Where can I download the TLV2462CP datasheet PDF?
The official TLV2462 datasheet can be accessed through the Texas Instruments TLV2462 product page at https://www.ti.com/product/TLV2462. The same family page links to ordering information, quality documentation, and device parameters. Use the manufacturer document for the final pin descriptions, electrical limits, test conditions, packaging drawing, and application guidance before releasing a PCB or production design.
Where can I find the TLV2462CP pinout?
The TLV2462CP uses an 8-pin PDIP package, and its authoritative pin descriptions are shown in the manufacturer datasheet pinout and connection diagrams. Open the Texas Instruments TLV2462 product page and use the pin configuration for ordering option TLV2462CP. Confirm pin numbering against the package drawing before assigning power, ground, inputs, outputs, or shutdown connections.
What is the gain-bandwidth product of TLV2462CP?
The TLV2462CP has a 6.4 MHz gain-bandwidth product. According to the Texas Instruments family description, this bandwidth supports relatively fast signal processing while the amplifier retains low-power characteristics of approximately 500 µA per channel. The resulting closed-loop bandwidth depends on noise gain, so use the manufacturer gain-bandwidth and stability guidance when selecting a feedback network.
Is TLV2462CP suitable for portable applications?
Yes, the TLV2462CP is designed for portable and other low-power applications because its cited supply current is approximately 500 µA per channel and its supply-voltage rating is 6 V. Rail-to-rail input and output behavior helps preserve signal range in compact systems. Actual battery-life suitability also depends on the operating voltage, duty cycle, load, and leakage outside the amplifier.
TLV2462CP vs TLV2462IPE4 - which is better for an industrial design?
The TLV2462CP and TLV2462IPE4 are both identified as 2-channel, 6.4 MHz, 8-pin PDIP devices in the available comparison information. The suffix distinction indicates different ordering or qualification options rather than a demonstrated change in bandwidth. Review the ordering table and temperature-grade limits in the Texas Instruments datasheet, then choose the variant whose qualification and availability match the product requirements.
What is the difference between TLV2462CP and LMV358?
The TLV2462CP is specified as a dual rail-to-rail input/output amplifier with a 6.4 MHz gain-bandwidth product, while the cross-reference information identifies the LMV358 as a through-hole 8-DIP replacement offering rail-to-rail output but not the same rail-to-rail input capability. The LMV358 can fit a compatible 8-DIP footprint, but offset, noise, bandwidth, and common-mode limits must be checked before substituting it.
When should I choose TLV2462CP over LMV358?
Choose the TLV2462CP when the design benefits from its specified 6.4 MHz bandwidth, approximately 500 µA per-channel supply current, and rail-to-rail input as well as output operation. The LMV358 may be attractive for a compatible through-hole 8-DIP footprint, but its input common-mode behavior and other electrical limits differ. Validate stability, output swing, input range, and load drive in the final circuit.
What is the best drop-in replacement for TLV2462CP?
The LMV358 is a documented through-hole, 8-DIP drop-in candidate for TLV2462CP, but it is not electrically identical: the TLV2462CP has rail-to-rail input and output behavior with 6.4 MHz bandwidth, whereas the cross-reference result identifies the LMV358 as having rail-to-rail output only. Use the manufacturer datasheets and an application-level comparison to confirm pinout, common-mode range, bandwidth, and output drive.
Can LMV358 replace TLV2462CP?
Yes, the LMV358 can serve as a pin-compatible drop-in candidate in a through-hole 8-DIP design, subject to electrical qualification. The TLV2462CP provides 6.4 MHz bandwidth and rail-to-rail input/output operation; the available cross-reference identifies the LMV358 with rail-to-rail output only. This difference can affect precision acquisition, sensor interfaces, and signals that exceed the alternative's input range.
What can replace TLV2462CP?
TLV2462-family options with an 8-pin PDIP footprint are the closest same-manufacturer replacements, while the LMV358 is a documented cross-brand through-hole 8-DIP candidate. The best replacement depends on whether rail-to-rail input, 6.4 MHz bandwidth, supply current, output swing, and temperature requirements must remain unchanged. Do not select a replacement from package shape alone.
Where to buy TLV2462CP online?
Use the Request a Quote form on this page to request TLV2462CP pricing, stock confirmation, lead time, and order quantities. The manufacturer identifies the device as an active dual, 6 V, 6.4 MHz RRIO operational amplifier in an 8-pin PDIP package. Providing the required quantity and target ship date will allow the exact ordering suffix and delivery plan to be confirmed.
What is the lead time for TLV2462CP?
Lead time depends on current inventory, manufacturing status, order quantity, and the requested delivery date. Use the Request a Quote form on this page to request a current lead-time commitment for the exact TLV2462CP ordering code. For production planning, also request date-code information, factory packing quantities, and any traceability or change-control requirements.
Is TLV2462CP in stock?
Stock availability changes with supplier inventory and order quantity, so use the Request a Quote form on this page for a current confirmation. The Texas Instruments product page provides the authoritative ordering information for the TLV2462CP, an 8-pin PDIP dual RRIO operational amplifier. Include your required quantity, target date, and approved manufacturer or package details in the request.
What is the best Texas Instruments equivalent for LMV358?
The TLV2462CP is a relevant Texas Instruments option when an 8-DIP footprint is required and the design can accommodate its rail-to-rail input behavior and 6.4 MHz bandwidth. It is specified as a dual, 6 V, low-power RRIO operational amplifier with approximately 500 µA supply current per channel. The LMV358 is not functionally identical, so verify offset, noise, common-mode range, and output-drive requirements before substitution.

Data referensi kejuruteraan untuk TLV2462CP — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the TLV2462CP when the circuit needs two low-power amplifier channels, rail-to-rail input and output operation, a 6.4 MHz gain-bandwidth product, and approximately 80 mA of output-drive capability in an 8-pin PDIP package. It is particularly suitable for portable sensing, active filtering, signal buffering, and audio preamplification where the source can move near either supply rail. TLV2462IPE4 and TLV2462CPE4 are closely related family options when their ordering-grade and qualification requirements better match the product, but verify their temperature and ordering details before selection. TLV2462ID can be considered within the same family when its exact grade and lifecycle details are suitable. LMV358 is the documented cross-brand-style, same-package candidate in the supplied cross-reference information, but it lacks the TLV2462CP's rail-to-rail input specification. Use LMV358 only after checking bandwidth, offset, noise, common-mode range, output swing, stability, and temperature limits.

Perbandingan dengan Gantian

Parametr Produk Ini TLV2462IPE4 TLV2462CPE4 TLV2462ID LMV358
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package PDIP-8 PDIP-8 PDIP-8 PDIP-8 8-pin PDIP
Amplifier Channels 2 channels 2 channels 2 channels 2 channels 2 channels
Rail-to-Rail Input Yes Yes Yes Yes No; rail-to-rail output only
Rail-to-Rail Output Yes Yes Yes Yes Yes
Device Class Low-power RRIO operational amplifier Low-power RRIO operational amplifier Low-power RRIO operational amplifier Dual high-speed signal-processing amplifier Dual low-power operational amplifier

Penyeberangsung Jelas

  • Broader input operating range than the LMV358 drop-in candidate (vsLMV358)
  • Clearly defined 6.4 MHz signal-processing bandwidth (vsTLV2462ID)
  • Dual low-power channels in one through-hole package (vsTLV2462CPE4)
  • Moderate output-drive margin for compact analog systems (vsLMV358)

Catatan Desain

Do not treat the 8-pin PDIP footprint as proof of electrical equivalence. The LMV358 is a documented 8-DIP drop-in candidate, but the available cross-reference identifies rail-to-rail output only, while the TLV2462CP is a rail-to-rail input/output device. Check the input common-mode range, offset voltage, noise, bandwidth, output swing, and load stability against the final signal source and load before substitution.

Place input, output, and supply bypass components close to their associated pins. Keep feedback components and signal traces short to limit parasitic capacitance and maintain the intended response from the 6.4 MHz gain-bandwidth product. For through-hole prototype boards, route sensitive input signals away from the power-entry path and relay or switching-node wiring to reduce injected noise into the high-impedance amplifier input.

Estimated supply-current consumption at the 6 V maximum rating is approximately 1.0 mA for both channels because the cited current is 500 µA per channel. This estimate excludes input bias current, output-current demand, leakage, and external-load effects. Confirm the actual quiescent current and output-current dissipation at the intended supply voltage using the manufacturer operating-characteristics curves before sizing the power rail.

Check capacitive loading at each output because the cited 80 mA drive capability does not by itself define the stable bandwidth for every load. Use the manufacturer stability guidance, especially when driving long PCB traces, ADC inputs, cables, or capacitive sensor devices. If a large load is required, insert a small isolation resistor and verify settling behavior at the intended closed-loop gain.

Maklumat Kesediaan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

RoHS-compliant status is identified in the TLV2462ID and TLV2462CP comparison information. No authoritative statements for REACH, lead-free status, halogen-free status, conflict minerals, or automotive qualification were found.

Data disahkan pada: 2026-11-19 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

tlv2462cp datasheet TLV2462CP pinout TLV2462CP datasheet pdf TLV2462CP specifications TLV2462CP equivalent TLV2462CP replacement TLV2462CP vs LMV358 TLV2462CP DIP-8 footprint TLV2462CP 6.4MHz op amp Texas Instruments TLV2462CP

Komponen dan Tanda berkaitan

Texas Instruments TLV2462CP TLV2462 TLV2462IPE4 TLV2462CPE4 TLV2462ID LMV358 operational amplifier dual operational amplifier rail-to-rail input/output amplifier RRIO low-power amplifier analog integrated circuit gain-bandwidth product 6.4 MHz 500 µA per channel 80 mA output drive PDIP-8 DIP-8 through-hole package portable electronics sensor signal conditioning active filter data acquisition RoHS
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ