Texas Instruments

TLV2765CD - 1.8V Micro-Power Quad Op Amp | Texas Instruments

MPN: TLV2765CD ✓ Aktif
1.8 V Vdss 20 uA Id 16-pin SOIC Package
MOQ: 1 |

TLV2765CD Ringkasan

The Texas Instruments TLV2765CD is a quad, 1.8 V micro-power rail-to-rail input/output operational amplifier with shutdown, packaged in a 16-pin SOIC. It supports supply voltages up to 3.6 V, consumes approximately 20 uA per channel, and offers a 500 kHz gain-bandwidth product. The TLV2765CD also provides a shutdown current of approximately 10 nA per channel, making it suitable for portable and low-power signal-processing systems.

A rail-to-rail input/output operational amplifier is a general-purpose amplifier whose input and output stages operate close to the supply rails. This topology allows the TLV2765CD to process low-voltage signals without requiring a midpoint-bias reference near mid-supply. As a quad amplifier, it combines four amplifier channels, shutdown control, and CMOS input characteristics in one 16-pin SOIC package, reducing board area when several low-voltage signals must be conditioned.

The principal features include a low 1.8 V operating supply, a maximum supply voltage of 3.6 V, rail-to-rail input and output operation, and approximately 20 uA of supply current per channel. Shutdown reduces the supply current to approximately 10 nA per channel. The family datasheet identifies a 500 kHz bandwidth for the TLV2765 device and an input offset voltage of 3500 uV for the CD grade. These characteristics make the amplifier appropriate for battery-powered instrumentation, sensor interfaces, and low-voltage analog signal chains.

The TLV2765 belongs to the TLV2764 and TLV2765 family of CMOS operational amplifiers with shutdown. Its rail-to-rail input stage supports operation near the lower and upper limits of the supply, while the rail-to-rail output stage provides useful output swing on low-voltage rails. Because the device is intended for micropower systems, total quiescent current and shutdown behavior are central to its system-level power budget.

Typical uses include portable sensor conditioning, low-voltage transimpedance stages, battery-powered monitor circuits, general-purpose analog filtering, and embedded data-acquisition interfaces. Designers can use the four channels for gain, buffering, level shifting, active filtering, or comparator-style functions where open-loop operation is appropriate. The shutdown function is useful when one subsystem must be disconnected while the rest of a low-power instrument remains active.

PCB design should keep input and feedback paths short and place input-referenced bypass capacitance close to the supply pins. Check output swing against the selected input and output voltages, because rail-to-rail operation does not guarantee a full rail-to-rail output under every load. For stable operation in amplifier configurations, follow the capacitance limits and recommended feedback values in the family datasheet.

This product page combines the TLV2765CD operating characteristics with package guidance, application analysis, comparison criteria, and practical design notes. It is intended to help engineers evaluate the TLV2765CD for low-voltage, micro-power signal-processing designs before finalizing a PCB or production BOM.

Pilihan pengganti yang segera untuk TLV2765CD — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

TLV2765ID

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 16-SOIC
Operating-temperature range is -40 C to +85 C versus 0 C to +70 C; the listed 3500 uV input offset-voltage maximum is unchanged.

📋 Alternatif rujukan (tidak dalam katalog)

TLV2765CD Penilaian maksimum & Ciri-ciri Elektrik

Number of Amplifier Channels 4 channels
Minimum Supply Voltage 1.8 V
Maximum Supply Voltage 3.6 V
Supply Current per Channel 20 uA
Shutdown Supply Current per Channel 10 nA
Gain-Bandwidth Product 500 kHz
Input Offset Voltage 3500 uV
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Input Type CMOS
Shutdown Control Yes
Gambaran Suhu Operasi 0 C to +70 C
Kemasan 16-pin SOIC
Jenis Pemasangan Surface mount
Product Type Quad operational amplifier
Amplifier Class General-purpose amplifier

Panduan Konfigurasi Pin TLV2765CD 16-pin soic

Konfigurasi pin untuk TLV2765CD (16-pin soic pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai 16-pin soic untuk TLV2765CD

Tiada data garisan pin yang diperoleh untuk TLV2765CD.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

TLV2765CD patut untuk 6 aplikasis: Battery-Powered Sensor Conditioning, Portable Medical Monitoring, Industrial Sensor Interface, Portable Data Acquisition, Low-Voltage Audio and Control, Battery-Powered IoT Node.

🔋

Battery-Powered Sensor Conditioning

The TLV2765CD suits low-voltage sensor interfaces because it operates from a 1.8 V supply and consumes approximately 20 uA per channel. Rail-to-rail input operation is valuable when the sensor output approaches either supply rail, while the rail-to-rail output stage provides useful signal swing at low voltage. Four channels can provide buffering, gain, and active filtering around a compact sensor module. Shutdown can disconnect the amplifier during inactive measurement intervals, with the family datasheet specifying approximately 10 nA per channel in that state.

💊

Portable Medical Monitoring

The TLV2765CD can provide low-voltage amplification and buffering for compact monitoring equipment operating from a 1.8 V rail. Its rail-to-rail input stage accepts signals near the supply limits, and the quad configuration supports several sensing channels without requiring separate packages. The approximately 20 uA per-channel supply current is important for battery life, while shutdown allows unused channels or subsystems to remain in a low-current state. Medical designs must still validate the complete signal chain, isolation requirements, and applicable regulatory standards independently of the amplifier.

🏭

Industrial Sensor Interface

For industrial instrumentation, the TLV2765ID is the appropriate family variant when operation across -40 C to +85 C is required. It retains the 16-pin SOIC format, 1.8 V minimum supply, rail-to-rail input and output behavior, and 500 kHz bandwidth associated with the TLV2765 family. The low 20 uA per-channel current supports compact distributed measurement systems, while shutdown provides a controllable low-current state. The CD grade remains appropriate when the enclosure stays within 0 C to +70 C.

📟

Portable Data Acquisition

The TLV2765CD is well suited to compact, low-voltage data-acquisition front ends that must amplify several inputs. Its four channels can serve as non-inverting amplifiers, buffers, or active-filter stages, while the 500 kHz gain-bandwidth product provides bandwidth for moderate-speed instrumentation. Operation from 1.8 V supports conversion to lower supply rails, and approximately 20 uA per channel limits amplifier contribution to portable-system power. Designers should verify input bandwidth, settling behavior, output loading, and accuracy for the selected gain and signal bandwidth.

🎧

Low-Voltage Audio and Control

The TLV2765CD can amplify and buffer low-level audio or control signals in portable equipment powered from a 1.8 V rail. Rail-to-rail inputs and outputs improve usable signal range when supply voltage is constrained, while the quad package provides four independent channels for volume, filtering, and interface functions. The approximately 20 uA per-channel current is useful for energy-sensitive designs, and the 500 kHz bandwidth covers many control and general audio paths. Verify output swing, capacitive-load behavior, and channel-to-channel performance against the intended signal.

🧩

Battery-Powered IoT Node

The TLV2765CD is useful in an IoT sensor node that operates from a low-energy supply and must process several small analog signals. Its 1.8 V operating capability and approximately 20 uA per-channel consumption support long standby intervals, while shutdown reduces the stated supply current to approximately 10 nA per channel. Rail-to-rail input and output stages improve signal utilization in compact mixed-signal nodes. The host microcontroller, radio, sensor, and power converter remain the dominant system-level considerations, so the amplifier should be enabled and disabled according to the node's measurement schedule.

Ringkasan Produk Disebarkan

TLV2765CD Texas Instruments Dipergunakan di: Battery-Powered Sensor Conditioning, Portable Medical Monitoring, Industrial Sensor Interface, Portable Data Acquisition, Low-Voltage Audio and Control, Battery-Powered IoT Node TLV2765IPW Same-family amplifier for TSSOP layout evaluation Dipergunakan di: Battery-Powered Sensor Conditioning, Portable Data Acquisition TLV2764ID Texas Instruments Dipergunakan di: Portable Medical Monitoring TLV2765ID Industrial-temperature quad amplifier Dipergunakan di: Industrial Sensor Interface, Battery-Powered IoT Node TLV2764CD Related single-shutdown family amplifier Dipergunakan di: Low-Voltage Audio and Control
What are the key specifications of TLV2765CD that engineers should know?
The TLV2765CD is a quad, 1.8 V micro-power operational amplifier with rail-to-rail input and output stages in a 16-pin SOIC package. According to the Texas Instruments TLV2764 and TLV2765 family datasheet, the device supports supplies up to 3.6 V, consumes approximately 20 uA per channel, provides 500 kHz gain-bandwidth product, and draws approximately 10 nA per channel in shutdown. Its CD grade is specified for a 0 C to +70 C ambient temperature range.
Where to download the TLV2765CD datasheet PDF?
The TLV2765CD datasheet PDF is available from the manufacturer-document links listed on this page, including the TLV2764 and TLV2765 family document hosted by Digi Electronics. The document describes the electrical characteristics, pin configuration, shutdown behavior, typical application circuits, and ordering information for the CD, ID, IN, and PW package variants. Use the family datasheet to verify the exact 16-pin SOIC pin functions and test conditions before laying out the PCB.
Where can I find the TLV2765CD pinout?
The TLV2765CD pinout is found in the pin-configuration section of the Texas Instruments TLV2764 and TLV2765 family datasheet. The CD device is a 16-pin SOIC containing four operational-amplifier channels, supply connections, and shutdown-related pins. Use the numbered package drawing and pin-description table together because some SOIC package variants have different exposed-pad or lead arrangements.
What is the operating voltage of TLV2765CD?
The TLV2765CD operates from a 1.8 V minimum supply to a 3.6 V maximum supply. According to the Texas Instruments TLV2764 and TLV2765 family datasheet, the family was designed for low-voltage, single-supply operation and includes rail-to-rail input and output stages. Confirm the actual operating voltage against the amplifier's common-mode and output-swing limits for the signal being measured.
How much current does each TLV2765CD channel consume?
Each TLV2765CD channel consumes approximately 20 uA of supply current in normal operation. According to the Texas Instruments TLV2764 and TLV2765 family datasheet, the family also supports an ultralow-power shutdown mode with approximately 10 nA per channel. Exact operating and shutdown current depend on supply voltage, temperature, output state, and test conditions, so use the datasheet tables for design calculations.
What is the difference between TLV2765CD and TLV2765ID?
The primary documented difference is the ambient temperature grade: the TLV2765CD is specified from 0 C to +70 C, while the TLV2765ID is specified from -40 C to +85 C. The TLV2765 family datasheet lists both grades with a 3500 uV input offset-voltage maximum. The CD version is the choice for commercial-temperature equipment; the ID version is intended for wider industrial temperature coverage.
When should I choose TLV2765CD instead of TLV2765ID?
Choose the TLV2765CD when the design operates within a 0 C to +70 C ambient range and does not require industrial temperature coverage. Choose the TLV2765ID when the same amplifier family and electrical behavior must operate from -40 C to +85 C. The Texas Instruments family datasheet identifies the CD and ID grades with the same 3500 uV input offset-voltage maximum, making temperature range the principal selection distinction.
Is the TLV2765CD suitable for battery-powered sensor interfaces?
The TLV2765CD is suitable for many battery-powered sensor interfaces because it operates from a 1.8 V supply and consumes approximately 20 uA per channel. Its rail-to-rail input stage is useful when sensor outputs span most of the available supply range. The approximately 10 nA-per-channel shutdown specification can further reduce current when the amplifier is not needed, although total system consumption also depends on the sensor and external circuitry.
What can replace the TLV2765CD?
The TLV2765ID is the closest documented same-family choice for designs that can use a wider temperature grade and retain the 16-pin SOIC footprint. It differs by being specified for -40 C to +85 C rather than 0 C to +70 C. A replacement should always be checked against pin functions, shutdown polarity, common-mode range, output swing, bandwidth, and stability requirements before it is treated as drop-in.
Is TLV2765CD the same as a general-purpose quad op amp?
The TLV2765CD is a general-purpose quad operational amplifier, but it has a defined micropower and low-voltage feature set rather than being interchangeable with every quad op amp. According to the Texas Instruments family datasheet, it supports a 1.8 V minimum supply, rail-to-rail inputs and outputs, approximately 20 uA per channel, and shutdown. Pin compatibility alone is insufficient unless those electrical features also satisfy the design.
Where can I buy TLV2765CD online and check its price?
Use the Request a Quote form on this page to ask about TLV2765CD pricing, availability, lot traceability, and order quantity. The form provides a direct purchasing path without embedding a price that may change between quotes. For technical qualification, confirm the 16-pin SOIC package, the 0 C to +70 C temperature grade, and the required electrical limits before placing the order.
What is the lead time for TLV2765CD?
The current lead time for TLV2765CD should be requested through the Request a Quote form on this page, including the required quantity, package configuration, and target delivery date. The 16-pin SOIC CD suffix identifies the commercial-temperature device, but it does not itself guarantee a stock position or delivery schedule. Confirming lot availability during quotation also helps prevent last-time-buy and mixed-lot concerns.
Is TLV2765CD in stock?
Current TLV2765CD inventory should be confirmed through the Request a Quote form on this page. The form accepts the quantity and target delivery requirements needed for an allocation response. Before finalizing an order, also verify that the quotation refers to the TLV2765CD 16-pin SOIC device with the 0 C to +70 C operating range rather than another package or temperature-grade suffix.
What is the best Texas Instruments equivalent for TLV2765CD?
The TLV2765ID is the best documented Texas Instruments family alternative for a wider industrial temperature design because it retains the 16-pin SOIC format and the same 3500 uV input offset-voltage maximum. It differs in temperature rating, extending from -40 C to +85 C versus 0 C to +70 C. Confirm shutdown behavior and all electrical limits in the family datasheet before substituting it into an existing design.
How should the TLV2765CD be used for low-voltage filtering?
The TLV2765CD can form active low-pass or high-pass filter stages because it combines rail-to-rail input and output operation with a 500 kHz gain-bandwidth product. According to the Texas Instruments family datasheet, the amplifier operates down to a 1.8 V supply. Keep the signal amplitude within the output-swing limits, use feedback values that preserve stability, and place bypassing and sensitive feedback components close to the device.

Data referensi kejuruteraan untuk TLV2765CD — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the TLV2765CD when the design operates from a 1.8 V to 3.6 V supply, needs four rail-to-rail amplifier channels, and will remain within a 0 C to +70 C ambient environment. It is appropriate for compact commercial, portable, sensor-conditioning, filtering, and low-voltage control applications where approximately 20 uA per channel and shutdown capability help manage power. Choose the TLV2765ID instead when the same 16-pin SOIC family is needed across -40 C to +85 C. Its wider temperature rating is the primary functional distinction. Do not select either device solely by the SOIC footprint: confirm shutdown polarity, common-mode range, output swing, bandwidth, offset voltage, stability, and external-component requirements against the family datasheet.

Perbandingan dengan Gantian

Parametr Produk Ini TLV2765ID
Package 16-SOIC 16-SOIC - same
Brand Texas Instruments Texas Instruments
Number of Channels 4 4
Minimum Supply Voltage 1.8 V 1.8 V
Maximum Supply Voltage 3.6 V 3.6 V
Supply Current per Channel 20 uA 20 uA
Shutdown Current per Channel 10 nA 10 nA
Gain-Bandwidth Product 500 kHz 500 kHz
Input Offset Voltage Maximum 3500 uV 3500 uV
Operating Temperature Range 0 C to +70 C -40 C to +85 C
Input Common-Mode Range Rail-to-rail Rail-to-rail
Shutdown Function Yes Yes

Penyeberangsung Jelas

  • Commercial-temperature grade for cost-sensitive commercial equipment (vsTLV2765ID)
  • Four low-power channels in one package (vsTLV2765ID)
  • Low-voltage rail-to-rail operation (vsTLV2765ID)

Catatan Desain

Place supply bypass capacitance close to the device's supply and ground pins, and keep amplifier input and feedback traces short to reduce coupling from adjacent switching circuits. For low-voltage designs, treat the entire input and feedback network as sensitive to leakage, contamination, and board-surface currents; use suitable guarding and clean PCB materials when very high input impedance is required.

Estimated: active supply current is approximately 20 uA per channel, so four continuously enabled channels can draw approximately 80 uA before including the device's shutdown-state bias and external load. If shutdown places the device at approximately 10 nA per channel, four disabled channels would draw approximately 40 nA. These are arithmetic estimates based on the family datasheet values; verify the final power budget at the actual supply voltage, temperature, and output state.

Do not assume that rail-to-rail input or output operation means the output can reach either supply rail exactly. Check the output-swing conditions for the chosen load and output voltage, and verify that the input remains within the common-mode range over temperature. Also confirm that the shutdown pin polarity and state in the family datasheet match the system power-sequencing requirements.

Use the family datasheet's recommended feedback resistor and capacitive-load limits when driving cables, ADC inputs, or other capacitive networks. The 500 kHz gain-bandwidth product is a small-signal characteristic and does not by itself define large-signal settling, slew rate, or output-current capability. Simulate the complete gain stage and verify settling time with the intended load and signal pattern.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

Compliance status was not stated in the available component pages. The TLV2765CD is a general-purpose commercial-temperature amplifier rather than an AEC-Q100-qualified automotive device.

Data disahkan pada: 2026-11-10 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

TLV2765CD datasheet TLV2765CD pinout TLV2765CD datasheet pdf TLV2765CD specifications TLV2765CD equivalent TLV2765CD replacement TLV2765CD drop-in replacement TLV2765CD vs TLV2765ID TLV2765CD price TLV2765CD stock Texas Instruments TLV2765CD TLV2765CD 16-SOIC pinout TLV2765CD application circuit TLV2765CD 1.8V op amp

Komponen dan Tanda berkaitan

Texas Instruments TLV2765CD TLV2765ID TLV2765IPW TLV2764CD TLV2764ID quad operational amplifier micro-power amplifier CMOS operational amplifier rail-to-rail input rail-to-rail output low-dropout architecture shutdown function gain-bandwidth product input offset voltage common-mode range output swing 16-pin SOIC surface-mount package sensor conditioning active filtering battery-powered instrumentation industrial instrumentation portable data acquisition
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ