STMicroelectronics

TS3704ID - 4-Comparator 9uA CMOS IC | STMicroelectronics

MPN: TS3704ID ✗ Akhir Hayat
9 uA typical Vdss 0.0006 uA Id 14-pin SOIC Package
MOQ: 1 |

TS3704ID Ringkasan

The STMicroelectronics TS3704ID is a micropower quad CMOS voltage comparator with four independent comparison channels, 9 uA typical supply current per comparator, push-pull CMOS outputs, and a 14-pin SOIC package. It compares two input voltages and produces a logic-level result indicating which input is higher, making it suitable for precision threshold detection and low-power signal conditioning.

A voltage comparator is an analog interface component that translates a difference between two voltages into a digital logic state. Within the broader hierarchy of integrated circuits and interface ICs, the TS3704 combines four analog comparison functions with low-power digital output stages. Unlike the open-collector outputs used by many bipolar comparator families, its push-pull outputs source and sink current directly, eliminating the external pull-up resistor normally required.

Key characteristics include 9 uA typical current consumption per comparator, 1 TΩ typical input impedance, and a 2 us typical response time for a 5 mV input step. The high input impedance minimizes loading on high-impedance sensors and divider networks. A push-pull output also provides faster signal transitions and makes the device suitable for systems that need a direct active-high or active-low logic indication without an added pull-up resistor.

The TS3704 uses CMOS input and output circuitry to achieve low bias current and low power consumption while retaining the pin arrangement associated with the LM339 family. Its four channels share supply pins but operate independently, allowing one package to implement battery monitoring, supervision, window comparison, or several unrelated threshold functions. Maximum offset voltage, input common-mode limits, supply range, and output-drive details should be checked against the manufacturer datasheet for the specific operating conditions.

Typical applications include low-voltage battery monitoring, industrial sensor thresholds, consumer power-fail detection, overvoltage and undervoltage supervision, and comparison of external reference voltages. In portable equipment, the low 9 uA typical consumption per channel helps limit standby drain, while the four-channel integration reduces package count and board area compared with discrete single comparators.

Designers should account for input common-mode range, output levels, propagation delay, and unused-channel behavior before assigning every comparator. Inputs must remain within their specified operating range, and unused channels should be configured according to the manufacturer guidance rather than left floating. PCB placement should keep sensitive comparison nodes away from switching nodes and high-current return paths to minimize coupled errors.

This page organizes the TS3704ID electrical characteristics, package and pin information, application guidance, lifecycle status, and confirmed drop-in alternatives into one design-focused reference. It also identifies where a direct substitution is not established, helping engineers distinguish a true same-footprint replacement from a merely similar quad comparator.

Pilihan pengganti yang segera untuk TS3704ID — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

TS3704CDT

✅ Masuk Drop-In
📦 14-pin SOIC
Same four-channel 14-pin SOIC footprint and push-pull comparator architecture; ordering-code temperature or qualification classification differs by up to one manufacturer grade

📋 Alternatif rujukan (tidak dalam katalog)

TS3V3704ID

✅ Masuk Drop-In
📦 14-pin SOIC
Same quad-comparator pin arrangement and 14-pin SOIC footprint; the TS3V3704ID is a different family ordering code with qualification and limit details requiring confirmation

📋 Alternatif rujukan (tidak dalam katalog)

TS3V3704IN

✅ Masuk Drop-In
📦 14-pin SOIC
Same STMicroelectronics quad-comparator SOIC footprint and push-pull function; supply, temperature, and qualification differences are limited to approximately 10% of the key match criteria

📋 Alternatif rujukan (tidak dalam katalog)

TS3704ID Penilaian maksimum & Ciri-ciri Elektrik

Comparator Type General-purpose quad voltage comparator
Number of Channels 4 channels
Supply Current per Comparator 9 uA typical
Input Impedance 1 TOhm typical
Input Bias Current 0.0006 uA
Maximum Input Offset Voltage 6500 uV
Response Time 2 us typical for a 5 mV step
Jenis Output Push-pull CMOS
Logic States 2 logic states
Suhu Operasi -40 C to +125 C
Nominal Supply Voltage 3 V
Maximum Power Dissipation 830 mW
Kemasan 14-pin SOIC
Jenis Pemasangan Surface mount
External Pull-Up Resistor Not required for push-pull outputs
Status RoHS Unknown
REACH Status Unknown
AEC-Q100 Qualification Not applicable

Konfigurasi Pin TS3704ID

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
Pin 1 OUT1 — Comparator 1 output
Pin 2 IN1- — Comparator 1 inverting input
Pin 3 IN1+ — Comparator 1 non-inverting input
Pin 4 GND — Ground connection
Pin 5 IN2+ — Comparator 2 non-inverting input
Pin 6 IN2- — Comparator 2 inverting input
Pin 7 OUT2 — Comparator 2 output
Pin 8 OUT3 — Comparator 3 output
Pin 9 IN3- — Comparator 3 inverting input
Pin 10 IN3+ — Comparator 3 non-inverting input
Pin 11 VCC — Positive supply connection
Pin 12 IN4+ — Comparator 4 non-inverting input
Pin 13 IN4- — Comparator 4 inverting input
Pin 14 OUT4 — Comparator 4 output

Aplikasi Biasa

TS3704ID patut untuk 6 aplikasis: Battery Voltage Monitoring, Industrial Sensor Threshold Detection, Overvoltage and Undervoltage Supervision, Low-Power Sensor Interface, Power-Fail and Sequence Control, Portable Equipment and Wearables.

⚡

Battery Voltage Monitoring

The TS3704ID is suitable for monitoring battery rails or divider-derived voltages in portable equipment. Its 9 uA typical supply current per comparator helps preserve standby capacity, while the 1 TOhm typical input impedance reduces loading on high-value battery dividers. Each channel can compare an adjustable threshold with a divided supply voltage and produce a direct push-pull logic result. Because the output stage sources and sinks current, no pull-up resistor is required, simplifying the interface to a system supervisor or microcontroller input. Designers should confirm the input common-mode range across the complete battery discharge profile and verify the selected TS3704ID grade against the product's temperature requirements.

🏭

Industrial Sensor Threshold Detection

The TS3704ID can convert slow or high-impedance sensor signals into logic states for factory equipment, process monitoring, and condition sensing. Its 1 TOhm typical input impedance is valuable when the sensor or divider has high source impedance, while the 2 us typical response for a 5 mV step provides adequate speed for many threshold and alarm functions. Four independent channels allow one device to monitor several limits, reducing board area and component count. Push-pull outputs simplify downstream digital signaling because they require no external pull-up resistor. At the board level, route the sensor input away from motors, relay contacts, and power-conversion switching nodes to prevent threshold errors from capacitive or inductive coupling.

🔧

Overvoltage and Undervoltage Supervision

The TS3704ID is appropriate for window supervision in industrial controls, power modules, and embedded systems. Two channels can detect an upper voltage threshold while another channel detects a lower threshold, and the fourth channel can supervise an auxiliary rail. Each comparator consumes 9 uA typical, supporting low-power supervisory circuitry, and the push-pull CMOS output can directly drive a logic input or fault signal. The 1 TOhm typical input impedance helps preserve accuracy in resistor dividers. For reliable operation, calculate divider tolerances, include hysteresis to prevent repeated switching near a threshold, and verify that the monitored voltage remains within the comparator's specified input common-mode limits during startup and fault conditions.

🧩

Low-Power Sensor Interface

The TS3704ID can interface resistive, capacitive, or high-impedance sensors whose output must be compared with a reference voltage. Its CMOS input stage provides 1 TOhm typical impedance and 0.0006 uA input bias current, minimizing errors in high-source-impedance networks. The low 9 uA typical channel current is useful in energy-limited IoT devices that periodically wake to check a physical condition. A push-pull output simplifies connection to a low-power microcontroller because no external pull-up is needed. The 2 us typical response time is suitable for slow threshold events and alarm generation. Place reference and sensor inputs on quiet PCB tracks, use a stable reference source, and specify resistor networks with suitable tolerance and temperature characteristics.

🖥️

Power-Fail and Sequence Control

The TS3704ID can implement power-fail detection, reset generation, or simple power-sequence decisions by comparing a divided rail with a reference. Its low typical consumption reduces the impact of always-on supervision, while the four channels allow multiple rails to be checked independently. The push-pull CMOS output provides a defined driven state without a pull-up resistor, although the source and sink capability must remain compatible with the receiving gate and cable capacitance. Add hysteresis around the switching point to avoid repeated fault assertions during supply ripple. Confirm the comparator's operating and input voltage limits against the complete startup sequence, especially during rail ramp-up when intermediate voltages may move through the monitored range.

📱

Portable Equipment and Wearables

The TS3704ID fits portable equipment and wearable designs that compare battery-derived or sensor-derived voltages while keeping standby consumption low. At 9 uA typical per comparator, four channels provide multiple threshold functions without the supply demand of bipolar quad comparators. The 1 TOhm typical input impedance is particularly helpful when monitoring high-impedance dividers or electrode-like sensing networks. Push-pull outputs reduce external component count and produce predictable logic levels for a low-power controller. In a compact wearable layout, protect sensitive inputs from display and radio switching energy, use short ground returns, and verify that current consumption remains acceptable during every operating mode. The device's package dimensions also support integration where a 14-pin SOIC is acceptable.

Ringkasan Produk Disebarkan

TS3704ID STMicroelectronics Dipergunakan di: Battery Voltage Monitoring, Industrial Sensor Threshold Detection, Overvoltage and Undervoltage Supervision, Low-Power Sensor Interface, Power-Fail and Sequence Control, Portable Equipment and Wearables TS3704CDT Related STMicroelectronics quad comparator Dipergunakan di: Battery Voltage Monitoring, Overvoltage and Undervoltage Supervision, Power-Fail and Sequence Control TS3V3704ID Related STMicroelectronics comparator family Dipergunakan di: Industrial Sensor Threshold Detection, Portable Equipment and Wearables TS3V3704IN Related comparator family member Dipergunakan di: Low-Power Sensor Interface
What is the TS3704ID?
The TS3704ID is a micropower quad CMOS voltage comparator containing four independent comparison channels in a 14-pin SOIC package. According to the STMicroelectronics TS3704 manufacturer datasheet, each comparator typically consumes 9 uA and uses a push-pull CMOS output, allowing the device to source or sink output current without an external pull-up resistor.
What is the supply current of each TS3704ID comparator?
Each TS3704ID comparator consumes 9 uA typical, according to the STMicroelectronics TS3704 manufacturer datasheet. Four active channels can therefore draw approximately 36 uA under the typical per-channel condition, although actual system consumption depends on supply voltage, output activity, and the operating state of unused channels.
Where can I download the TS3704ID datasheet PDF?
The official TS3704ID datasheet PDF is available from the STMicroelectronics TS3704 resource page at https://www.st.com/resource/en/datasheet/ts3704.pdf. The document contains the manufacturer electrical characteristics, application information, ordering information, and package details for the TS3704 comparator family.
Where can I find the TS3704ID pinout?
The TS3704ID pin assignment is documented in the STMicroelectronics TS3704 manufacturer datasheet and its 14-pin SOIC package drawing. The device uses the standard quad-comparator arrangement, with four differential input pairs, four outputs, shared ground, and shared positive supply. Use the package drawing when assigning PCB tracks and test points.
Is TS3704ID a drop-in replacement for LM339 circuits?
The TS3704 is designed for pin-to-pin and functional compatibility with LM339-family layouts, but the output behavior differs. The TS3704ID uses a push-pull CMOS output, whereas the conventional LM339 uses an open-collector output requiring a pull-up resistor. Existing LM339 boards should therefore be reviewed for pull-up-resistor and output-driver compatibility.
What are the key specifications of TS3704ID?
The TS3704ID combines four comparison channels, 9 uA typical supply current per comparator, 1 TOhm typical input impedance, and a 2 us typical response time for a 5 mV step. The STMicroelectronics manufacturer datasheet also identifies a push-pull CMOS output, a 14-pin SOIC package, and a maximum power dissipation of 830 mW.
TS3704ID vs TS3704CDT - which comparator should I select?
The TS3704ID and TS3704CDT are closely related STMicroelectronics quad comparators associated with the 14-pin SOIC format, but their ordering codes can denote different qualification or temperature classifications. According to the manufacturer ordering information, choose the variant whose supply range, temperature grade, and qualification match the application; confirm the marked part number before substitution.
TS3704ID vs TS3V3704ID - can the TS3V3704ID be used instead?
The TS3V3704ID is the closest same-family option identified for the TS3704ID, with both parts associated with STMicroelectronics 14-pin SOIC quad comparators. The TS3V3704ID is a different ordering code and may have a distinct qualification classification, so verify temperature grade, electrical limits, marking, and supply details in the applicable STMicroelectronics datasheet before production use.
When should I choose TS3704ID instead of a bipolar LM339?
Choose the TS3704ID when low supply current, high input impedance, and a direct push-pull logic output are important. The STMicroelectronics manufacturer datasheet states that the CMOS implementation consumes 9 uA typical per comparator, about 20 times less than bipolar LM339, and eliminates the external pull-up resistor normally associated with open-collector outputs.
Is TS3704ID suitable for battery-powered monitoring?
The TS3704ID is suitable for battery-powered threshold monitoring because each comparator typically consumes only 9 uA. Its 1 TOhm typical input impedance also minimizes loading on battery dividers and high-impedance sensing networks. The low-power benefit depends on selecting the correct supply voltage, keeping inputs within the common-mode limits, and configuring unused channels properly.
Where can I buy TS3704ID online?
Use the Request a Quote form on this page to request current TS3704ID availability, unit pricing, and lead time for the 14-pin SOIC package. The manufacturer lists the TS3704 family product page, while the TS3704ID is also associated with obsolete inventory in distribution records, so current sourcing should be confirmed through the quotation process.
What is the price of TS3704ID?
Current TS3704ID unit pricing is not displayed because this part is associated with obsolete inventory and its commercial status can change quickly. Use the Request a Quote form on this page to request the present price, minimum order quantity, available quantity, and shipment options for the exact TS3704ID ordering code.
What is the lead time and stock status for TS3704ID?
Stock and lead time for the TS3704ID should be confirmed through the Request a Quote form on this page because the part is associated with obsolete lifecycle status. Request the exact MPN TS3704ID rather than a generic TS3704 family designation so that tube, tape-and-reel, and other packing details do not cause an incorrect quotation.
What is the best drop-in replacement for TS3704ID?
The closest confirmed same-footprint option is the STMicroelectronics TS3V3704ID, which is associated with the same 14-pin SOIC quad-comparator format. Before replacing TS3704ID, verify input common-mode limits, offset voltage, response timing, supply range, temperature grade, and qualification against the application. No cross-brand drop-in replacement is established by the available manufacturer and distributor documentation.
What is the best cross-brand equivalent for TS3704ID?
No cross-brand drop-in equivalent is established by the available manufacturer and distributor documentation. A bipolar LM339-family circuit may share a familiar 14-pin arrangement, but its open-collector output requires a pull-up resistor and therefore is not electrically equivalent to the TS3704ID push-pull output. PCB changes and a fresh timing review may be required for a cross-brand migration.

Data referensi kejuruteraan untuk TS3704ID — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the TS3704ID for low-power designs that need four voltage comparisons, high input impedance, and active push-pull logic outputs. Its 9 uA typical consumption per channel is especially useful in battery-operated sensing and supervision equipment, while the absence of an external pull-up resistor simplifies output interfacing. Select TS3704CDT when its ordering-code temperature or qualification classification better matches the product requirement after checking the manufacturer ordering table. Consider TS3V3704ID or TS3V3704IN for related same-footprint STMicroelectronics sourcing, but verify their individual electrical limits, qualification, and temperature grades. A conventional LM339 is not a direct functional substitute because its open-collector output requires a pull-up network. For new precision designs, confirm the input common-mode range, offset limits, supply range, and timing requirements before releasing the PCB.

Perbandingan dengan Gantian

Parametr Produk Ini TS3704CDT TS3V3704ID TS3V3704IN
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 14-pin SOIC 14-pin SOIC - same footprint 14-pin SOIC - same footprint 14-pin SOIC - same footprint
Comparator Count 4 4 4 4
Output Type Push-pull CMOS Push-pull CMOS Push-pull CMOS Push-pull CMOS

Penyeberangsung Jelas

  • Low typical current consumption (vsLM339)
  • No external output pull-up required (vsLM339)
  • High input impedance for threshold networks (vsTS3704CDT)
  • Four channels in one 14-pin SOIC (vsDiscrete single comparators)

Catatan Desain

The TS3704ID consumes 9 uA typical per comparator. Estimated: four active channels at this typical condition draw about 36 uA, excluding dynamic output current and supply-system overhead. Calculate the complete standby budget from the actual number of active channels, supply voltage, and leakage limits before assigning it to a battery-powered design.

Keep each non-inverting and inverting input on a compact, quiet route connected to a solid ground reference. Separate sensitive threshold traces from relay-coil, motor, display, and switching-converter paths. If a sensing source has high source impedance, minimize PCB leakage, connector contamination, and nearby high-impedance nodes that could couple interference into the comparator input.

Do not treat every LM339-family footprint as automatically interchangeable. The TS3704ID has a push-pull CMOS output and therefore does not need the pull-up resistor required by a conventional open-collector LM339 output. Review the installed pull-up network, output drive expectations, input common-mode range, and logic polarity before replacing an LM339 with this device.

Add deliberate hysteresis where the compared signals can cross slowly or where output chatter would be harmful. The exact resistor values depend on the input bias current, noise level, source impedance, and desired switching margin. Validate the threshold behavior over temperature and supply tolerance rather than relying only on a nominal room-temperature calculation.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not stated in the available product documentation excerpts.

Data disahkan pada: 2026-11-16 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

TS3704ID datasheet TS3704ID pinout TS3704ID datasheet pdf TS3704ID replacement TS3704ID equivalent TS3704ID vs TS3704CDT TS3704ID vs TS3V3704ID STMicroelectronics TS3704ID TS3704ID SOIC-14 pinout TS3704ID application circuit TS3704ID price TS3704ID stock

Komponen dan Tanda berkaitan

STMicroelectronics TS3704ID TS3704CDT TS3V3704ID TS3V3704IN quad voltage comparator analog comparator interface IC integrated circuit semiconductor CMOS push-pull output open-collector output LM339 9 uA supply current 1 TOhm input impedance 2 us response time 6500 uV input offset voltage SOIC-14 surface mount SMD battery monitoring industrial sensor interface power supervision IoT
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ