STMicroelectronics

TS932BIN - Dual 20uA Rail-to-Rail Op Amp | STMicroelectronics

MPN: TS932BIN ✓ Aktif
2.7 V to 10 V Vdss 20 uA Id 8-DIP, 7.62 mm row spacing Package
MOQ: 1 |

TS932BIN Ringkasan

The STMicroelectronics TS932BIN is a dual, micropower, rail-to-rail operational amplifier with a 2.7 V to 10 V supply range, 20 uA supply current per channel, and an 8-DIP package. The two amplifiers are intended for low-voltage instrumentation and general-purpose signal-conditioning applications. Their rail-to-rail output stage supports operation near the supply rails, while the low 20 uA per-channel current supports battery-powered and portable equipment.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its non-inverting and inverting inputs. The broader hierarchy is operational amplifier -> analog amplifier IC -> integrated circuit. The TS932BIN belongs to the micropower operational-amplifier family, where low quiescent current and rail-to-rail output capability are the principal selection criteria. Its dual-channel configuration also reduces component count when two independent gain stages are required.

Key electrical characteristics include a 2.7 V to 10 V operating supply, approximately 20 uA supply current per channel, up to 5 mA output current per channel, 1 pA input-bias current, and 55 dB nominal gain-bandwidth information. The device also supports rail-to-rail output operation and is specified for low-voltage applications. These characteristics make it appropriate for portable measurement, current sensing, and sensor-conditioning circuits where a conventional high-current amplifier would consume unnecessary power.

The TS932BIN uses a rail-to-rail output architecture rather than relying exclusively on conventional source or sink output stages. This allows output signals to approach both supply rails more closely, improving usable dynamic range in low-voltage systems. Because it is a dual amplifier, both channels share the same supply pins while retaining independent input and output connections. Engineering designs must still account for common-mode-range limits, output-current limits, input-bias-current effects, and the voltage drop needed to drive the connected load.

Typical applications include battery-powered sensor interfaces, portable instrumentation, low-current transducers, industrial control signals, and general dual-stage analog signal conditioning. Two amplifiers can be used for independent amplifier, buffer, comparator, or active-filter functions. For precision measurement systems, the circuit designer should verify input offset voltage, common-mode rejection, noise, and bias-current error against the complete signal-chain requirements rather than treating the amplifier as an ideal component.

A practical design consideration is to bypass each supply pin close to the device with local ceramic decoupling and route analog inputs away from switching-current paths. The operating range of 2.7 V to 10 V leaves design margin for both low-voltage portable systems and higher-voltage industrial rails. Output loading and feedback-network values should be checked against the 5 mA per-channel output-current capability.

This page combines the TS932BIN electrical characteristics, package information, pin assignment, engineering alternatives, comparison parameters, and application guidance into a selection reference for dual micropower operational-amplifier designs.

Pilihan pengganti yang segera untuk TS932BIN — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera TS932BIN (sama faktor bentuk dan kaki) — berbeza dalam Amplifier Type, Input Bias Current, Mounting Type, Package.

STMicroelectronics
Amplifier Type: Dual operational amplifier
Input Bias Current: 1 pA typical
Mounting Type: Surface mount
Bandingkan Dengan TS932BIN →

TS932ID

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
STMicroelectronics
📦 8-DIP
Dual operational amplifier · Yes · 2.7 V to 10 V · 100 kHz · 0.05 V/µs · 20 µA · 2.9 Vpp with 100 kΩ load · 1 pA typical

Hubungi untuk harga

Lihat Datasheet →

TS932BID

✅ Masuk Drop-In
📦 8-DIP
Same TS932 core ratings with 0% change to the 2.7 V to 10 V supply range and 20 uA per-channel supply current; ordering temperature grade must be verified

📋 Alternatif rujukan (tidak dalam katalog)

TS932IJ

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 8-DIP
Upper temperature rating increases from +85 C to +125 C, a 40 C increase; core electrical ratings and 8-DIP pinout are retained

📋 Alternatif rujukan (tidak dalam katalog)

TS932BIN Penilaian maksimum & Ciri-ciri Elektrik

Number of Amplifiers 2 channels
Amplifier Type General-purpose operational amplifier
Jenis Output Rail-to-rail
Supply Voltage Range 2.7 V to 10 V
Supply Current per Channel 20 uA
Output Current per Channel 5 mA
Input Bias Current 1 pA
Nominal Gain-Bandwidth 55 dB
Maximum Input Offset Voltage 2 mV
Nominal Common-Mode Rejection Ratio 85 dB
Gambaran Suhu Operasi -40 C to +85 C
Kemasan 8-DIP, 7.62 mm row spacing
Kiraan Pin 8 pins
Jenis Pemasangan Through-hole
Technology BiCMOS
Primary Application Low-voltage instrumentation
Power Consumption Class Micropower
Status RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_qualified

Konfigurasi Pin TS932BIN

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
Pin 1 OUT1 — Output of amplifier channel 1
Pin 2 IN1- — Inverting input of amplifier channel 1
Pin 3 IN1+ — Non-inverting input of amplifier channel 1
Pin 4 V- — Negative supply connection
Pin 5 IN2+ — Non-inverting input of amplifier channel 2
Pin 6 IN2- — Inverting input of amplifier channel 2
Pin 7 OUT2 — Output of amplifier channel 2
Pin 8 V+ — Positive supply connection

Aplikasi Biasa

TS932BIN patut untuk 6 aplikasis: Battery-Powered Sensor Interface, Portable Instrumentation Amplification, Low-Power Transducer Conditioning, Industrial Control Signal Buffering, Active Filtering and Gain Stage, Low-Voltage Data Acquisition.

💊

Battery-Powered Sensor Interface

The TS932BIN is well matched to battery-powered sensor interfaces because each amplifier channel consumes approximately 20 uA across the 2.7 V to 10 V supply range. Two independent channels can condition signals from two low-power sensors without requiring a separate package for each stage. The rail-to-rail output stage provides additional signal range in low-voltage systems, while the listed 1 pA input-bias current helps minimize loading on high-impedance sensors. Designers should still verify the actual common-mode range, noise performance, and sensor source impedance at the selected operating voltage.

📱

Portable Instrumentation Amplification

The TS932BIN supports portable instrumentation designs that require low supply current and flexible output range. Its dual-channel architecture can implement two noninverting gain stages, two buffers, or a mixed signal-conditioning arrangement. With a 2.7 V minimum supply and rail-to-rail output, the device can operate from compact battery-derived rails while preserving useful output headroom. For low-level measurement channels, verify the 2 mV maximum input offset voltage and 85 dB nominal CMRR against the required accuracy and common-mode environment.

🏭

Low-Power Transducer Conditioning

The TS932BIN is suitable for conditioning outputs from low-power transducers because its 1 pA listed input bias current reduces the loading imposed on high-impedance sources. The dual circuit can amplify one transducer channel and buffer another, or combine two gain stages in a differential measurement arrangement. Its 20 uA per-channel supply current is valuable when the transducer and signal chain must operate from a small energy budget. Feedback resistors should be selected to obtain the required gain while keeping output loading within the 5 mA per-channel capability.

🏭

Industrial Control Signal Buffering

The TS932BIN can buffer low-level industrial control signals when the design operates within its 2.7 V to 10 V range and -40 C to +85 C temperature interval. Rail-to-rail output helps preserve signal range at low supply voltages, while the dual package provides a compact way to condition two related channels. For factory equipment, place the device away from high-current switching nodes, maintain local supply decoupling, and confirm that the selected protection network does not introduce excessive leakage into the high-impedance input stage.

🔧

Active Filtering and Gain Stage

The TS932BIN can implement active filters and moderate-bandwidth gain stages when the signal bandwidth is within the amplifier's stated capability. The dual architecture allows a two-stage filter or separate gain and buffer channels without increasing the package count. Rail-to-rail output operation is useful when the filter must operate close to a low-voltage rail, while 20 uA per channel supports compact, low-power analog modules. Component tolerances and the amplifier's finite gain-bandwidth should be included in the frequency-response and stability analysis.

🖥️

Low-Voltage Data Acquisition

The TS932BIN is appropriate for compact data-acquisition front ends that need two low-power analog channels. It can buffer an ADC input, amplify a sensor signal, or provide separate channels for sampling multiple low-voltage measurements. The 2.7 V to 10 V supply range supports common low-voltage rails, and the listed 2 mV maximum input offset voltage should be included in the acquisition-error budget. Place the amplifiers close to the signal source when long traces could allow interference to dominate the small input signal.

What are the key specifications of TS932BIN that engineers should know?
The TS932BIN is a dual micropower operational amplifier with a 2.7 V to 10 V supply range, 20 uA supply current per channel, rail-to-rail output, and an 8-DIP package. According to the STMicroelectronics manufacturer datasheet, each channel can source or sink up to 5 mA, while input bias current is listed as 1 pA. Its dual configuration, low-voltage operation, and low supply current make it suitable for battery-powered instrumentation, sensor interfaces, buffering, and general-purpose analog conditioning.
What is the operating voltage range of TS932BIN?
The TS932BIN operates from 2.7 V to 10 V. According to the STMicroelectronics manufacturer datasheet, this range supports low-voltage portable systems as well as industrial applications operating from a 10 V rail or lower. Designers should include input-signal and output-swing headroom when selecting the supply voltage because rail-to-rail output does not mean that either input or output can safely reach every absolute maximum condition.
Is TS932BIN suitable for battery-powered applications?
Yes, the TS932BIN is suitable for battery-powered applications because it consumes approximately 20 uA per channel across a 2.7 V to 10 V supply range. According to the STMicroelectronics manufacturer datasheet, its rail-to-rail output allows useful signal swing at low supply voltages. Actual battery life depends on the complete circuit, including sensor current, pull-up resistors, indicator LEDs, and the operating duration of the analog signal.
What does rail-to-rail output mean for the TS932BIN?
Rail-to-rail output means the TS932BIN can drive its output toward both the positive and negative supply rails, subject to output-current and load limits. The STMicroelectronics manufacturer datasheet identifies the device as a rail-to-rail output amplifier. This is valuable in 2.7 V systems because it provides more usable output range than a conventional amplifier whose output stage begins to saturate near a supply rail.
Where to download the TS932BIN datasheet PDF?
The TS932BIN datasheet PDF is available from the official STMicroelectronics document link on this page, with an Octopart datasheet index also provided as a secondary reference. Use the manufacturer document for the authoritative pin description, electrical characteristics, application information, and package drawing. The TS932BIN is an 8-DIP dual amplifier, so verify the package suffix and pin orientation before constructing a PCB footprint.
Where can I find the TS932BIN pinout?
The TS932BIN pinout is the standard dual operational-amplifier arrangement in an 8-DIP package: pins 1 and 7 are outputs, pins 2 and 6 are inverting inputs, pins 3 and 5 are non-inverting inputs, pin 4 is the negative supply, and pin 8 is the positive supply. Confirm the final orientation against the pin-description table and package drawing in the STMicroelectronics manufacturer datasheet before assembly.
Where to buy TS932BIN online?
Use the Request a Quote form on this page to ask for TS932BIN availability, current pricing, and order routing. The quote team can confirm the exact TS932BIN package suffix, manufacturing condition, quantity breaks, and expected lead time. Avoid substituting a different package or temperature-grade suffix unless its pinout, supply limits, and operating-temperature requirements have been checked against the original design.
What is the price of TS932BIN?
Current TS932BIN pricing is obtained through the Request a Quote form on this page. The quote should reflect the exact manufacturer part number TS932BIN, its 8-DIP package, requested quantity, and current production or inventory status. Volume, date code, and delivery requirements can materially affect commercial terms, so request a quantity-specific quotation rather than relying on an old catalog price.
What is the lead time for TS932BIN?
Request the current TS932BIN lead time through the Request a Quote form on this page. The manufacturing source, order quantity, package form, and current inventory determine the realistic schedule. For production planning, ask the supplier to identify whether the material is active, newly manufactured, or drawn from remaining stock, and require confirmation of the date code and traceability before shipment.
Is TS932BIN in stock?
TS932BIN stock status should be confirmed through the Request a Quote form on this page. The form allows the buyer to specify quantity, target date, tube or other delivery format, and acceptable date-code requirements. For an active production design, prioritize confirmed original manufacturer material with full traceability rather than accepting an untraceable substitute based only on the TS932 family name.
TS932BIN vs TS932ID - which is better for extended-temperature use?
TS932ID is the better choice when the application requires operation above the TS932BIN's +85 C upper temperature rating. The TS932BIN is specified for -40 C to +85 C, whereas the TS932ID family variant extends the upper temperature rating to +105 C. Both use an 8-DIP package and retain the same basic dual micropower architecture, but engineers should verify every electrical limit before using the higher-temperature grade.
TS932BIN vs TS932BID - what is the difference?
The TS932BIN and TS932BID belong to the same TS932 dual micropower operational-amplifier family and use the same 8-DIP footprint. The TS932BIN has an operating-temperature range of -40 C to +85 C, while the exact limits of TS932BID must be checked in its ordering information. Both retain the family's 2.7 V to 10 V supply architecture and low 20 uA per-channel supply current.
When should I choose TS932BIN over another dual operational amplifier?
Choose TS932BIN when the design needs two amplifiers, a 2.7 V to 10 V supply range, approximately 20 uA per channel, and rail-to-rail output in an 8-DIP package. It is particularly appropriate for battery-powered instrumentation and low-power sensor interfaces. Choose a higher-current or wider-bandwidth amplifier when driving heavier loads, processing high-frequency signals, or operating outside the TS932BIN temperature range.
Is TS932BIN suitable for sensor signal conditioning?
Yes, TS932BIN is suitable for low-power sensor signal conditioning because it combines a 1 pA listed input-bias current, 2 mV maximum input offset voltage, 85 dB nominal CMRR, and 20 uA supply current per channel. According to the STMicroelectronics manufacturer datasheet, its rail-to-rail output is useful when the conditioned signal must occupy more of a low-voltage supply range.
What can replace TS932BIN?
The closest pin-compatible replacement families are the TS932ID and TS932BID variants in the same 8-DIP pin arrangement, subject to temperature-grade and operating-limit checks. A cross-manufacturer replacement should be selected only after verifying pinout, supply voltage, rail-to-rail behavior, offset voltage, bias current, bandwidth, output current, and operating temperature. Use the Request a Quote form to discuss approved sourcing options for the exact TS932BIN.

Data referensi kejuruteraan untuk TS932BIN — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose TS932BIN for low-voltage, low-power dual analog signal conditioning, especially when the circuit operates from 2.7 V to 10 V and needs rail-to-rail output in a through-hole 8-DIP package. Its approximately 20 uA per-channel supply current is valuable in battery-powered equipment, while the two channels can reduce package count. Select TS932ID when the ambient or equipment temperature can reach +105 C, or TS932IJ when the design must support up to +125 C. Use TS932BID only after confirming its exact ordering temperature grade. Choose a higher-current amplifier such as LM2902N/PB when the load or output-current demand exceeds the TS932 family's capability, and choose a wider-bandwidth device when the signal frequency exceeds the TS932 family's operating range.

Perbandingan dengan Gantian

Parametr Produk Ini TS932ID TS932BID TS932IJ
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package 8-DIP 8-DIP - same 8-DIP - same 8-DIP - same
Number of Amplifiers 2 channels 2 channels 2 channels 2 channels
Supply Voltage Range 2.7 V to 10 V 2.7 V to 10 V 2.7 V to 10 V 2.7 V to 10 V
Supply Current per Channel 20 uA 20 uA 20 uA 20 uA
Output Current per Channel 5 mA 5 mA 5 mA 5 mA
Output Type Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail
Maximum Input Offset Voltage 2 mV 2 mV 2 mV 2 mV
Nominal Common-Mode Rejection Ratio 85 dB 85 dB 85 dB 85 dB

Penyeberangsung Jelas

  • Lower power than a conventional dual general-purpose amplifier (vsLM2902N/PB)
  • Rail-to-rail output improves low-voltage signal range (vsLM2902N/PB)
  • Direct same-family temperature-grade options (vsTS932BIN)

Catatan Desain

Use local ceramic decoupling at the V+ and V- pins, with the shortest possible ground return from pin 4. The TS932BIN is specified at approximately 20 uA per channel, so supply leakage, input-protection leakage, and resistor loading can become significant in high-impedance battery-powered designs. Calculate the total circuit current rather than relying only on the amplifier specification, and ensure the source can support the maximum channel current over the full 2.7 V to 10 V supply range.

Keep the two amplifier channels away from switching nodes and high-current return paths because the TS932BIN is intended for low-level signal conditioning. Place input components close to pins 2, 3, 5, and 6, and route feedback traces away from the output traces at pins 1 and 7. For an 8-DIP design, check the notch orientation and pin-1 marking during PCB layout and assembly documentation.

Do not treat rail-to-rail output as permission to exceed the output-current or absolute-maximum limits. The listed output capability is 5 mA per channel, and the accepted supply range is 2.7 V to 10 V. Verify load current, output swing, input common-mode limits, and temperature derating. When using TS932ID or TS932IJ instead of TS932BIN, update the PCB documentation and production test limits to match the selected temperature grade.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Qualified
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The manufacturer documentation identifies the TS932BIN as a general-purpose instrumentation operational amplifier, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for this ordering code.

Data disahkan pada: 2026-11-16 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

TS932BIN datasheet TS932BIN pinout TS932BIN datasheet pdf TS932BIN specifications TS932BIN 2.7V 10V op amp TS932BIN 8-DIP pinout STMicroelectronics TS932BIN TS932BIN equivalent TS932BIN replacement TS932BIN vs TS932ID TS932BIN battery powered amplifier TS932BIN price TS932BIN stock TS932BIN lead time

Komponen dan Tanda berkaitan

STMicroelectronics TS932BIN TS932ID TS932BID TS932IJ operational amplifier dual operational amplifier micropower amplifier analog amplifier IC integrated circuit rail-to-rail output supply voltage supply current input bias current input offset voltage common-mode rejection ratio gain-bandwidth 8-DIP DIP package through-hole package BiCMOS battery-powered systems sensor signal conditioning industrial instrumentation low-voltage applications
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ