STMicroelectronics

TS944AIN - Quad Micropower Rail-to-Rail Op Amp | STMicroelectronics

MPN: TS944AIN ✓ Aktif
1.2 uA per channel typical Vdss 1 pA typical Id 14-DIP (0.300 in, 7.62 mm) Package
MOQ: 1 |

TS944AIN Ringkasan

The STMicroelectronics TS944AIN is a quad general-purpose operational amplifier with four independent rail-to-rail output channels in a 14-DIP through-hole package. It operates from low supply voltages and provides a typical supply current of 1.2 uA per channel, a 10 kHz gain-bandwidth product, and a 0.0045 V/us slew rate.

An operational amplifier, or op amp, is a voltage-controlled differential amplifier used to amplify small voltage differences. A rail-to-rail output stage can approach the positive and negative supply rails, improving output-voltage range in low-voltage systems. The TS944AIN belongs to the operational-amplifier hierarchy within analog and signal-chain semiconductors, combining four amplifier channels, micropower consumption, and through-hole construction in one package.

The four-channel architecture reduces the number of amplifiers needed for multi-signal conditioning. Each channel offers a typical 10 kHz gain-bandwidth product and 0.0045 V/us slew rate, making the device appropriate for low-frequency buffering, sensor amplification, and general-purpose signal conditioning. Typical input bias current is 1 pA, while typical input offset voltage is 5 mV.

Performance is optimized for low-power rather than high-speed operation. The 10 kHz gain-bandwidth product favors stable operation near unity gain and limits bandwidth in precision measurement stages. The 0.0045 V/us slew rate also means the amplifier requires time to respond to larger output transitions. Its 1.2 uA typical supply current per channel reduces the power budget in portable and always-on equipment.

Typical uses include low-frequency sensor interfaces, battery-powered instrumentation, audio signal conditioning, industrial control inputs, and four-channel acquisition systems. The 14-DIP format is useful for through-hole prototypes, educational circuits, repair work, and industrial assemblies where a socketed or manually inserted package is preferred.

Designers should verify the complete electrical limits, input common-mode range, output swing, supply range, and stability requirements in the STMicroelectronics datasheet before finalizing the circuit. Decoupling capacitors, input bias-current return paths, output loading, and resistor values remain application-dependent and should be selected from the device's recommended operating conditions.

Pilihan pengganti yang segera untuk TS944AIN — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera TS944AIN (sama faktor bentuk dan kaki) — berbeza dalam Amplifier Type, Input Offset Voltage, Package, Supply Current.

STMicroelectronics
Amplifier Type: General-purpose operational amplifier
Input Offset Voltage: 10 mV typical
Package: 14-DIP, 0.300 inch pitch
Bandingkan Dengan TS944AIN →

TS944IN

✅ Masuk Drop-In
STMicroelectronics
📦 14-DIP (0.300 in, 7.62 mm)
4 circuits · General-purpose operational amplifier · Rail-to-rail · 2.5 V to 10 V · 10 kHz · 10 kHz · 0.0045 V/us · 1.2 uA per amplifier

Hubungi untuk harga

Lihat Datasheet →

TS944AIN Penilaian maksimum & Ciri-ciri Elektrik

Amplifier Type General Purpose
Number of Circuits 4 circuits
Jenis Output Rail-to-rail
Kemasan 14-DIP (0.300 in, 7.62 mm)
Jenis Pemasangan Through-hole
Arus Pemberi Arus 1.2 uA per channel typical
Gain Bandwidth Product 10 kHz
Slew Rate 0.0045 V/us
Input Bias Current 1 pA typical
Input Offset Voltage 5 mV typical
Output Current per Channel 5 mA
Terminal Count 14 terminals

Panduan Konfigurasi Pin TS944AIN 14-dip (0.300 in, 7.62 mm)

Konfigurasi pin untuk TS944AIN (14-dip (0.300 in, 7.62 mm) pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai 14-dip (0.300 in, 7.62 mm) untuk TS944AIN

Tiada data garisan pin yang diperoleh untuk TS944AIN.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

TS944AIN patut untuk 6 aplikasis: Battery-Powered Sensor Conditioning, Industrial Process Measurement, Low-Power Audio Buffering, Portable Medical Monitoring, Test and Measurement Front End, Automotive Low-Speed Control Interface.

🧩

Battery-Powered Sensor Conditioning

The TS944AIN fits low-power sensor interfaces because its four channels operate from a supply current of 1.2 uA per channel while providing rail-to-rail outputs. Each amplifier can buffer a high-impedance sensor signal or provide gain before conversion by an ADC. The 10 kHz gain-bandwidth product is appropriate for slow temperature, pressure, and position signals rather than high-speed waveforms. In a battery-powered design, the device helps minimize four-channel signal-path overhead without requiring multiple packages. Confirm the supply range, input common-mode limits, offset contribution, and output-load behavior in the STMicroelectronics datasheet.

🏭

Industrial Process Measurement

The TS944AIN can support four low-frequency industrial measurement channels where compactness and low supply current are important. Its 10 kHz gain-bandwidth product is suitable for buffering slow pressure, level, and temperature signals, while the rail-to-rail output maximizes swing in low-voltage instrumentation systems. Four amplifiers in one 14-DIP package simplify board partitioning when the signal bandwidth is limited. Protection networks, input filtering, grounding, and isolation should be added according to the measured-node environment. Check the common-mode range, offset voltage, output current, and operating-temperature limits before using the device in safety-related or high-noise industrial circuits.

🎧

Low-Power Audio Buffering

The TS944AIN is suitable for low-frequency audio buffering when the design prioritizes low supply current and rail-to-rail output swing. Its four channels can handle stereo differential or single-ended signal paths, and the 0.0045 V/us slew rate accommodates general-purpose audio functions with conservative bandwidth requirements. Because the gain-bandwidth product is only 10 kHz, the device is better suited to audio-frequency signal routing and general conditioning than demanding wideband audio paths. Layout should keep input traces away from switching nodes, provide local supply bypassing, and confirm that the output can drive the intended load without violating the datasheet limits.

💊

Portable Medical Monitoring

The TS944AIN is a candidate for portable monitoring equipment that conditions several low-frequency physiological or environmental sensors. Its four amplifier channels and 1.2 uA typical supply current per channel help conserve battery capacity, while rail-to-rail outputs improve signal utilization at low supply voltages. The 10 kHz gain-bandwidth product fits slow biopotential or sensor-trend signals rather than wideband acquisition. In medical instrumentation, the signal-chain accuracy, isolation strategy, protection level, and applicable quality requirements must be evaluated independently; the amplifier itself does not establish medical certification. Validate offset, noise, common-mode range, and patient-circuit protection at the system level.

🔧

Test and Measurement Front End

The TS944AIN can provide four general-purpose buffers or amplifiers ahead of slow measurement circuits in laboratory and field-test equipment. The 14-DIP package is convenient for prototypes, manual assembly, and repairable through-hole boards, while four channels reduce the number of discrete amplifier packages. The 10 kHz gain-bandwidth product and 5 mV typical input offset voltage set practical expectations for low-frequency measurements rather than precision instrumentation. High-impedance sources need a suitable bias-current return path, and grounding must be arranged to avoid injecting errors into the measured signal. Confirm output settling, loading, and noise behavior against the intended bandwidth.

🚗

Automotive Low-Speed Control Interface

The TS944AIN may be considered for non-safety-critical, low-speed automotive interface circuits when its electrical and temperature limits are verified for the vehicle environment. Four rail-to-rail amplifier channels can condition position, pressure, or switch-status signals, while the 1.2 uA typical supply current per channel supports low quiescent power. The 14-DIP package is primarily suited to prototypes and specialized through-hole assemblies rather than compact automotive modules. Engine-bay applications require careful review of temperature range, transient protection, electromagnetic compatibility, vibration, and qualification. The suffix and ordering information should be checked for the exact deployment requirements before production use.

What is the TS944AIN?
The TS944AIN is a quad general-purpose operational amplifier with four independent rail-to-rail output channels in a 14-DIP through-hole package. According to the STMicroelectronics product description, each channel typically consumes 1.2 uA of supply current, has a 10 kHz gain-bandwidth product, and provides a 0.0045 V/us slew rate. It is intended for low-power buffering, instrumentation, and general-purpose signal-conditioning applications.
What is the operating voltage of TS944AIN?
The operating-voltage limits must be confirmed from the STMicroelectronics TS944AIN datasheet before the device is used in a new design. The available product information confirms a micropower quad amplifier with rail-to-rail outputs, 1.2 uA typical supply current per channel, and a 14-DIP package. Use the datasheet's absolute-maximum and recommended-supply tables to verify the permitted supply range under every temperature and load condition.
Is TS944AIN a quad rail-to-rail operational amplifier?
Yes, the TS944AIN is a quad operational amplifier with four independent general-purpose channels and rail-to-rail output capability. The manufacturer describes it as an output rail-to-rail micropower operational amplifier. Its 14-DIP package contains four complete amplifier sections, making it suitable for designs that need several low-frequency signal-conditioning paths in one component.
What are the key specifications of TS944AIN that engineers should know?
The TS944AIN combines four general-purpose amplifier channels, rail-to-rail output, 1.2 uA typical supply current per channel, a 10 kHz gain-bandwidth product, a 0.0045 V/us slew rate, 1 pA typical input bias current, and a 5 mV typical input offset voltage. It is packaged in a 14-DIP through-hole outline. These characteristics make it most suitable for low-power, low-frequency signal-conditioning applications.
Where can I download the TS944AIN datasheet PDF?
The TS944AIN datasheet can be downloaded from the linked manufacturer-document page or through the STMicroelectronics product documentation for this device. The datasheet contains the authoritative pin configuration, electrical characteristics, typical performance curves, application information, and package drawings. Use the manufacturer document for final design decisions rather than relying on distributor summaries or third-party copies.
Where can I find the TS944AIN pinout?
The TS944AIN pin configuration is shown in the STMicroelectronics datasheet's pin-description and package-outline sections. The component is a 14-DIP device containing four operational amplifiers and their shared supply connections. Before assigning PCB tracks, confirm every pin number against the pin-description table because the exact electrical names and exposed functions should follow the manufacturer document for this ordering code.
What can replace TS944AIN?
TS944IN is the closest identified same-family drop-in candidate because it uses the same TS944 quad rail-to-rail micropower amplifier configuration and 14-DIP format. Its key ratings are expected to align closely with the TS944AIN, but temperature-grade marking and operating limits should be checked before substitution. No verified cross-brand replacement was established from the available cross-reference results, so pin and specification checks are essential.
Is TS944IN the same as TS944AIN?
TS944IN and TS944AIN are closely related members of the STMicroelectronics TS944 quad rail-to-rail micropower operational-amplifier family, with the same basic four-channel architecture and 14-DIP package. The ordering suffix can indicate temperature-grade or qualification differences, so they should not be treated as unconditionally identical. Confirm the temperature range, marking scheme, and absolute-maximum ratings in the applicable manufacturer datasheet.
TS944AIN vs TS944IN: which is better for low-power instrumentation?
TS944IN is a strong drop-in candidate when the design already uses a 14-DIP TS944 circuit and its temperature-grade limits meet the application. The TS944AIN provides the same core quad rail-to-rail micropower amplifier functionality with four channels, 1.2 uA typical supply current per channel, and a 10 kHz gain-bandwidth product. Choose the suffix whose manufacturer-specified temperature and qualification requirements suit the deployment environment.
When should I choose TS944AIN over a generic quad op amp?
Choose TS944AIN when a design needs four rail-to-rail output channels in one low-power through-hole package. Its 1.2 uA typical supply current per channel, 10 kHz gain-bandwidth product, and 0.0045 V/us slew rate are suitable for low-frequency sensor and control-signal conditioning. A generic amplifier may be preferable only when its supply range, common-mode range, offset, bandwidth, and package details provide a closer match.
Is TS944AIN suitable for battery-powered sensor interfaces?
The TS944AIN is suitable for many battery-powered sensor interfaces because it combines four amplifier channels with a typical supply current of 1.2 uA per channel. The rail-to-rail output also helps maximize usable signal swing in low-voltage systems. Its 10 kHz gain-bandwidth product and 5 mV typical input offset make it better suited to slow sensors and general conditioning than high-speed or precision-level requirements.
How should the TS944AIN be used in a signal-conditioning circuit?
Use the TS944AIN as a voltage follower, buffer, or noninverting stage when the signal frequency is well below its 10 kHz gain-bandwidth product. Connect bypass capacitors close to the supply pins, provide a suitable bias-current return path for high-impedance sources, and check output loading before relying on the rail-to-rail output stage. The complete recommended operating conditions should be taken from the manufacturer datasheet.
What are the thermal and power considerations for TS944AIN?
The TS944AIN is designed for low power: the typical supply current is 1.2 uA per channel. Nevertheless, total dissipation depends on the actual supply voltage, output swing, and load current. For four channels, use the per-channel figure and operating conditions from the datasheet, verify the 14-DIP thermal resistance for the intended airflow, and avoid exceeding the maximum junction temperature.
Where to buy TS944AIN online?
Use the Request a Quote form on this page to request TS944AIN availability, current lead time, minimum order quantity, and packaging requirements. The form allows buyers to specify the exact TS944AIN ordering code without relying on a static listing that may change. Before releasing a purchase order, confirm the manufacturer lifecycle status, date codes, and delivery condition.
What is the price and lead time of TS944AIN?
The current TS944AIN price and lead time are obtained by submitting the Request a Quote form on this page. Quote responses should identify the exact 14-DIP ordering code, quantity, desired shipment date, and packaging preference. Because distributor inventory and commercial terms can change without notice, request current confirmation rather than relying on a historical price or an assumed stock position.
Is TS944AIN in stock?
TS944AIN stock status should be confirmed through the Request a Quote form on this page because availability can change with manufacturer inventory and distributor activity. Include your required quantity and target delivery date in the request. If the part has become constrained, the quote response can also identify an approved alternate that preserves the 14-DIP footprint and required electrical characteristics.
What is the best cross-brand equivalent for TS944AIN?
No cross-brand drop-in equivalent was verified from the available cross-reference results, so there is no responsible basis for naming one as a direct replacement. A valid substitute must match the 14-DIP footprint, four-channel architecture, rail-to-rail output behavior, supply-voltage range, common-mode range, input-offset voltage, bandwidth, slew rate, and power consumption. Use the Request a Quote form to request a reviewed alternative if production continuity is required.

Data referensi kejuruteraan untuk TS944AIN — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose TS944AIN when the design needs four general-purpose, low-frequency amplifiers in a 14-DIP package and values low power more than high bandwidth. Its 1.2 uA typical supply current per channel, rail-to-rail output, and 10 kHz gain-bandwidth product fit sensor buffers, slow measurement channels, industrial interfaces, and compact low-power control systems. TS944IN is the closest identified drop-in alternative because it retains the same TS944 core configuration and package, but its ordering suffix must be checked for temperature-grade and qualification differences. Do not substitute a generic quad op amp unless its supply range, common-mode range, output swing, offset, bandwidth, slew rate, quiescent current, and 14-DIP pinout all match. A generic amplifier may offer wider bandwidth or lower offset, but it may also consume more power or provide less output swing.

Perbandingan dengan Gantian

Parametr Produk Ini TS944IN
Brand STMicroelectronics STMicroelectronics
Package 14-DIP (0.300 in, 7.62 mm) 14-DIP (0.300 in, 7.62 mm)
Number of Amplifier Circuits 4 4
Output Type Rail-to-rail Rail-to-rail
Supply Current per Channel 1.2 uA typical 1.2 uA typical
Gain Bandwidth Product 10 kHz 10 kHz
Slew Rate 0.0045 V/us 0.0045 V/us
Input Bias Current 1 pA typical 1 pA typical
Input Offset Voltage 5 mV typical 5 mV typical
Output Current per Channel 5 mA 5 mA

Penyeberangsung Jelas

  • Four micropower amplifier channels in one through-hole package (vsTS944IN)
  • Rail-to-rail output reduces low-voltage signal-range constraints (vsTS944IN)
  • Very low typical input bias current supports high-impedance signal sources (vsTS944IN)
  • A defined ordering suffix supports exact procurement and qualification control (vsTS944IN)

Catatan Desain

Place a local bypass capacitor close to each supply connection and route return current directly to the device ground. Because the typical current is 1.2 uA per channel, leakage through board contamination, sockets, and protection components can become significant. Use low-leakage diodes where input protection is required, avoid excessive resistive bias networks, and confirm that shutdown or leakage currents remain acceptable for the complete analog system.

Do not select the TS944AIN for signal paths requiring megahertz bandwidth, fast edge capture, or very low input-offset error. Its 10 kHz gain-bandwidth product, 0.0045 V/us slew rate, and 5 mV typical input offset define its practical operating class. Also verify that the source impedance and feedback network do not create excessive noise gain or amplifier instability. The manufacturer gain-bandwidth and stability guidance should be used for final resistor selection.

Keep the 14-DIP footprint on a through-hole board with adequate spacing from high-current switching nodes and motor-drive wiring. Route each amplifier's input and feedback traces away from supply-current edges and digital clock lines. For high-impedance sensors, use a short guarded input path and provide a defined bias-current return voltage. The rail-to-rail output reduces headroom requirements, but it does not remove the need to verify the allowed output swing at the selected supply voltage.

The low 10 kHz gain-bandwidth product generally simplifies stability compared with high-speed amplifiers, but the feedback network still determines noise gain and bandwidth. Check the source impedance against the bias-current and offset requirements, and ensure the load does not force the output outside its permitted current or swing limits. When driving an ADC, place any anti-alias capacitor according to the ADC's acquisition requirements and observe the resulting feedback-network constraints.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

Compliance attributes are not stated in the manufacturer-linked information used for this page. The component is a general-purpose industrial instrumentation amplifier rather than an automotive-qualified ordering variant.

Pencarian Berhubungan

TS944AIN datasheet TS944AIN pinout TS944AIN datasheet pdf TS944AIN equivalent TS944AIN replacement TS944AIN vs TS944IN TS944AIN cross reference STMicroelectronics TS944AIN TS944AIN 14-DIP footprint TS944AIN application circuit TS944AIN rail-to-rail op amp TS944AIN price TS944AIN stock what is TS944AIN

Komponen dan Tanda berkaitan

STMicroelectronics TS944AIN TS944IN operational amplifier quad operational amplifier general-purpose amplifier rail-to-rail output micropower amplifier voltage buffer signal conditioning gain-bandwidth product slew rate input bias current input offset voltage supply current 14-DIP through-hole package industrial instrumentation battery-powered sensor interface audio signal conditioning semiconductor
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ