VSC8504XKS-01 - Quad-Port Gigabit Ethernet PHY | Microchip
MPN: VSC8504XKS-01 ✓ AktifVSC8504XKS-01 Ringkasan
A Gigabit Ethernet physical layer, commonly called a Gigabit Ethernet PHY, converts high-speed serial signaling on copper cabling into data that a network controller or system-on-chip can process. Within the Ethernet hierarchy, the VSC8504 belongs to the physical-layer transceiver class and connects an Ethernet MAC through a standard digital interface. Energy Efficient Ethernet allows supported links to reduce power when traffic is light, while EcoEthernet provides additional power-management capabilities for network equipment.
The VSC8504 family integrates four Gigabit Ethernet channels in one package. This high channel density reduces board-area requirements compared with four separate single-port devices, although the 256-ball package still demands careful escape routing, power planning, and thermal design. The source information identifies the PHY as supporting 10/100/1000BASE-T Ethernet operation, although exact trace-length, reach, and media specifications should be confirmed in the manufacturer documentation for the selected board design.
The multi-port architecture is particularly useful in network switches, routers, industrial gateways, and data-center edge equipment where four copper Ethernet ports are required. A common implementation places the VSC8504 beside a switching or routing controller, connects each PHY to the corresponding MAC interface, and routes the four differential copper pairs through controlled-impedance PCB traces. Magnetic isolation and surge protection must be added when the device is connected to external cabling.
VSC8504XKS-01 is suited to enterprise networking, data-center infrastructure, and consumer networking equipment identified by Microchip. Quad-port integration can simplify synchronization and board layout, but each channel still requires suitable magnetic components or an appropriate integrated isolation solution. Firmware configuration, register compatibility, and the precise supported operating modes should be reviewed against the current manufacturer product documentation before schematic release.
PCB implementation requires strict attention to high-speed differential routing, continuous return paths, controlled impedance, and separation between PHY clocks, data interfaces, and analog copper-network connections. Follow the VSC8504 Hardware Design Checklist for layer construction, component placement, power, and copper media guidance. Decoupling, thermal relief around the PBGA, and the specified ball-to-land-pattern alignment are essential to first-pass manufacturability.
This product record combines the manufacturer’s quad-port Gigabit Ethernet positioning with package data, verified source links, practical hardware guidance, lifecycle considerations, and a constrained comparison of same-package family options. The result helps engineers assess PCB reuse, interface compatibility, and thermal complexity before committing the VSC8504XKS-01 to an Ethernet networking design.
Pilihan pengganti yang segera untuk VSC8504XKS-01 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera VSC8504XKS-01 (sama faktor bentuk dan kaki) — berbeza dalam Product Type.
VSC8504XKS-02
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
VSC8504XKS-05
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
VSC8504XKS-01 Spesifikasi
| Product Type | Quad-port Gigabit Ethernet PHY |
| Number of Ethernet Ports | 4 ports |
| Ethernet Speed Support | 10/100/1000BASE-T |
| Power Management | EcoEthernet and Energy Efficient Ethernet |
| Package Type | 256-ball PBGA |
| Package Dimensions | 17 x 17 mm |
| Terminal Count | 256 balls |
| Package Shape | Square |
| Jenis Pemasangan | Surface mount |
| Product Category | Ethernet interface IC |
| Maximum Link Speed | 1 Gb/s per port |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | not_applicable |
Panduan Konfigurasi Pin VSC8504XKS-01 square
Konfigurasi pin untuk VSC8504XKS-01 (square pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk VSC8504XKS-01.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
VSC8504XKS-01 patut untuk 6 aplikasis: Enterprise Network Switches, Industrial Ethernet Gateways, Data-Center Edge Equipment, Consumer Networking Equipment, Network Interface Cards, Multimedia and IoT Hubs.
Enterprise Network Switches
The VSC8504XKS-01 fits enterprise switch designs requiring four copper Gigabit Ethernet PHY channels in one device. Its quad-port architecture can reduce PHY component count while preserving one Gigabit-class network path per channel, and EcoEthernet plus Energy Efficient Ethernet can support lower link activity. The 256-ball PBGA requires careful layer planning, but it provides the density needed for compact multi-port line cards. Integration requires a compatible switching or routing controller, four corresponding MAC interfaces, suitable magnetic or isolation components, and controlled-impedance routing for every copper channel.
Disebarkan
Industrial Ethernet Gateways
VSC8504XKS-01 is suitable for industrial gateways that must consolidate several copper Ethernet connections into a controller or system-on-chip. Four integrated Gigabit PHY channels can simplify enclosure space and reduce the number of external transceiver assemblies, while link-aware power management can benefit intermittently connected industrial networks. A production design must add the required isolation and surge protection at each external cable interface. Confirm the device’s operating-temperature limits, clock source, management register compatibility, and environmental qualification before using it in deployed industrial equipment.
Disebarkan
Data-Center Edge Equipment
The VSC8504XKS-01 can support data-center edge appliances that expose four copper Gigabit Ethernet service ports to an internal switching or routing ASIC. Its quad-port integration limits the number of discrete PHY packages, and Energy Efficient Ethernet can reduce power consumption when supported links are lightly loaded. The design trade-off is routing complexity: a 256-ball PBGA requires escape routing, uninterrupted reference planes, and careful separation of high-speed interface signals from copper-media circuitry. Thermal design should be based on the selected operating mode and the manufacturer’s power data.
Disebarkan
Consumer Networking Equipment
VSC8504XKS-01 fits consumer routers, gateways, and multi-port network appliances that need four integrated Gigabit Ethernet PHY channels. Consolidating four ports into one device can reduce board footprint and component assembly work, while EcoEthernet and Energy Efficient Ethernet target lower consumption in consumer networks. A compatible host controller remains necessary, as are external magnetic components or another approved isolation solution for copper connections. The dense PBGA should be evaluated against simpler single-port implementations when cost, assembly yield, or unused ports dominate the design priorities.
Disebarkan
Network Interface Cards
VSC8504XKS-01 can serve as the four-port copper PHY section of a network interface card or mezzanine. The device provides four Gigabit-class channels while leaving packet processing and forwarding to the associated controller, which is useful in modular server and accelerator platforms. The board designer must manage high-speed digital interfaces, clock distribution, power sequencing, and copper-media isolation across the PBGA and connector areas. Confirm controller register support and the exact device revision before freezing the card architecture.
Disebarkan
Multimedia and IoT Hubs
The VSC8504XKS-01 is appropriate for connected hubs that combine multiple wired Ethernet endpoints with embedded control or storage. Four PHY channels can connect cameras, service nodes, or wired peripherals through a common controller while link power management helps reduce energy use on lightly loaded links. The design should use short, controlled-impedance copper traces and place protection close to external connectors. Firmware support for Energy Efficient Ethernet and the available PHY operating modes must be checked against the hub’s networking software before production release.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk VSC8504XKS-01 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | VSC8504XKS-02 | VSC8504XKS-05 |
|---|---|---|---|
| Package | 256-PBGA (17 x 17 mm) | 256-PBGA (17 x 17 mm) | 256-PBGA (17 x 17 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Mounting Type | Surface mount | Surface mount | Surface mount |
Penyeberangsung Jelas
- Four Gigabit PHY channels in one package (vsVSC8514XMK-03)
- Same-package revision option for PCB reuse (vsVSC8504XKS-02)
- Established -01 ordering configuration (vsVSC8504XKS-05)
Catatan Desain
Treat the 256-ball PBGA as a high-density, high-speed design. Follow the manufacturer land pattern exactly, verify ball assignments against the pin-description table, and provide continuous reference planes beneath the device wherever the package drawing permits. Escape routed digital interfaces and differential copper-media pairs must maintain controlled impedance, adequate spacing, and uninterrupted return paths. Do not approve the footprint from a generic BGA library because package ball maps are not interchangeable.
Apply the VSC8504 Hardware Design Checklist before schematic and layout release. Keep each Ethernet channel’s signal path consistent with the manufacturer’s recommended topology, place magnetic or isolation components near the cable entry, and locate surge-protection devices at the physical connector boundary. Separate switching supplies, clocks, and high-speed digital interfaces from sensitive copper-media sections, and review layer transitions with the PCB fabricator’s impedance-control capability.
Estimated thermal design must be completed using the maximum power mode from the current manufacturer documentation, the selected ambient temperature, and the PCB copper area. The 256-ball PBGA can spread heat across multiple planes, but its electrical and thermal performance still depends on via patterns, layer construction, enclosure airflow, and neighboring heat sources. Validate the finished board at maximum channel activity and the highest expected ambient temperature rather than relying on package size alone.
Do not assume that two VSC8504 ordering codes are interchangeable merely because they use the same 256-PBGA outline. Check revision-specific electrical limits, management registers, firmware behavior, initialization requirements, supported power-management modes, and lifecycle status before revising a production BOM. If the replacement changes any magnetic-component recommendation, clock requirement, isolation method, or PHY-to-MAC interface behavior, schedule a hardware and firmware regression test.
Maklumat Kesediaan
The manufacturer identifies VSC8504XKS-01 as a networking interface IC, but no RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration appears in the cited product information. A non-automotive network PHY is treated as not applicable for AEC-Q100 qualification, subject to confirmation of the exact ordering code.