VSC8574XKS-10 - 4-Port Gigabit Ethernet PHY | Microchip
MPN: VSC8574XKS-10 ✓ AktifVSC8574XKS-10 Ringkasan
A Gigabit Ethernet physical-layer transceiver is an interface IC that converts digital MAC data into electrical signaling for copper Ethernet connections. The VSC8574 belongs to the Ethernet interface hierarchy, where a multiport PHY supports several physical network ports while a host MAC supplies and receives packet data through a serial or quad-serial interface. Its four-port integration reduces component count in access switches, industrial gateways, telecom equipment, and network appliances.
Key features include four Gigabit Ethernet ports, SGMII and QSGMII MAC connectivity, VeriTime IEEE 1588 support, and Ring Resiliency. SGMII provides a serial interface between the PHY and MAC, while QSGMII aggregates four lanes to support a quad-port network architecture. These interfaces let the device serve as the physical layer beneath a switching or aggregation ASIC. The manufacturer also identifies single-step and two-step IEEE 1588 timestamping, MPLS and Ethernet Y.1731 OAM support, and EcoEthernet 2.0 as part of the device feature set.
The -10 ordering code identifies this configuration within the VSC8574 family, which is positioned for telecommunications and industrial networking applications. A 256-pin PBGA requires careful ball assignment and multilayer PCB construction because the high pin count supports multiple copper ports, clocks, control signals, data interfaces, and power distribution. Accurate high-speed routing, controlled impedance, local decoupling, and careful return-path continuity are central to achieving reliable operation.
Typical uses include 10/100/1000Base-T access switches, industrial Ethernet gateways, telecom aggregation equipment, carrier Ethernet platforms, and synchronized networking systems. The four-port arrangement is particularly useful where each port must support Gigabit Ethernet while the system architecture uses QSGMII to connect the PHY bank to a central MAC or switching fabric. Ring Resiliency can improve service continuity in network topologies designed for rapid protection switching.
Design the power network with separate filtering and decoupling strategies for the PHY, clocks, interfaces, and I/O. Keep bulk and local capacitors close to their associated supply pins, use continuous ground-plane references beneath high-speed links, and avoid stubs on clock and data nets. The Microchip VSC8574 Hardware Design Checklist provides guidance on bulk decoupling, ferrite-bead filtering, and supply distribution for this device family.
This page consolidates the confirmed four-port Gigabit Ethernet functionality, package information, interface types, resilience features, sourcing workflow, and practical hardware considerations. It also organizes same-family drop-in alternatives and differentiates ordering variants without treating unrelated Ethernet PHYs as footprint-compatible replacements.
Pilihan pengganti yang segera untuk VSC8574XKS-10 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera VSC8574XKS-10 (sama faktor bentuk dan kaki) — berbeza dalam Package, MAC Interface, Mounting Type, Number of Ethernet Ports, Product Type.
VSC8574XKS-02
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →VSC8574XKS-05
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
VSC8582XKS-10
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →VSC8574XKS-10 Spesifikasi
| Product Type | 4-port Gigabit Ethernet PHY transceiver |
| Number of Ethernet Ports | 4 ports |
| Ethernet Speed | Gigabit Ethernet |
| MAC Interface | SGMII and QSGMII |
| Precision Time Protocol | IEEE 1588 |
| Time-Stamping Modes | Single-step and two-step |
| OAM Support | MPLS and Ethernet Y.1731 |
| Network Resilience | Ring Resiliency |
| Energy-Efficient Ethernet | EcoEthernet 2.0 |
| Kemasan | 256-pin PBGA, 17 mm x 17 mm |
| Jenis Pemasangan | Surface-mount |
| Status Lingkungan Hidup | Active |
Panduan Konfigurasi Pin VSC8574XKS-10 256-pin pbga, 17 mm x 17 mm
Konfigurasi pin untuk VSC8574XKS-10 (256-pin pbga, 17 mm x 17 mm pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.
Tiada data garisan pin yang diperoleh untuk VSC8574XKS-10.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
VSC8574XKS-10 patut untuk 6 aplikasis: Gigabit Ethernet Access Switches, Telecommunications Ethernet Equipment, Industrial Ethernet Gateways, Carrier Ethernet Aggregation Platforms, Synchronized Network Test Equipment, Secure Network Appliances.
Gigabit Ethernet Access Switches
The VSC8574XKS-10 fits quad-port access-switch hardware because one device implements four Gigabit Ethernet PHYs while presenting a consolidated connection to the forwarding ASIC. QSGMII can carry the four lanes as one wider interface, reducing the number of physical links between the PHY bank and switch fabric. SGMII remains available for designs that organize the ports differently. This arrangement is useful when board space, connector density, and assembly cost must be controlled without sacrificing 1000Base-T support on every port. Four-port integration also simplifies the synchronization of link training, cable diagnostics, and common clock distribution across the port bank. The principal hardware constraint is the 256-pin PBGA, which requires dense routing, reliable power delivery, and a multilayer PCB with careful thermal and signal-integrity engineering.
Disebarkan
Telecommunications Ethernet Equipment
The VSC8574XKS-10 is suited to telecommunications equipment that requires four copper Gigabit Ethernet ports and precise synchronization. Its SGMII and QSGMII interfaces connect the PHY section to telecommunications MAC and aggregation silicon, while IEEE 1588 support provides the timing foundation required by synchronized Ethernet networks. The manufacturer also identifies MPLS and Ethernet Y.1731 OAM support and Ring Resiliency, which are valuable in carrier-oriented designs. Using one four-port PHY simplifies synchronization across the port bank and reduces repeated PHY support circuitry. Design engineers should still evaluate the exact operating-temperature grade, supply requirements, reference clocks, and cable-length performance from the ordering-specific datasheet before qualifying the device for outdoor or carrier-grade deployments.
Disebarkan
Industrial Ethernet Gateways
The VSC8574XKS-10 can provide four Gigabit Ethernet ports on an industrial gateway that aggregates equipment traffic before forwarding it to a control system or network edge. A QSGMII connection can reduce interface count between the gateway PHY and its host processor or switch ASIC, while SGMII supports architectures that require a separate serial link per channel. IEEE 1588 timing is useful in plants that coordinate distributed automation equipment across an Ethernet network. The four-port PHY also allows one board to serve multiple machine connections without requiring four separate physical-layer devices. Because the PBGA package has 256 balls and dense high-speed interfaces, the design should use a multilayer PCB, short clock routes, continuous ground references, and local supply decoupling. Confirm the industrial temperature range and qualification details for the exact ordering code.
Disebarkan
Carrier Ethernet Aggregation Platforms
The VSC8574XKS-10 supports carrier Ethernet aggregation platforms requiring multiple copper access ports and timing-aware network operation. Four Gigabit PHYs provide a compact interface tier beneath a network processor, while SGMII and QSGMII offer selectable bandwidth aggregation strategies. IEEE 1588 timestamping supports synchronization across the transport network, and the family's MPLS, Y.1731 OAM, and Ring Resiliency features address operational requirements commonly considered in carrier networks. Integrating four ports into one device can reduce board area and simplify shared clock and power distribution. The engineering tradeoff is a demanding 256-pin PBGA footprint, so pin assignment, layer transitions, thermal performance, and high-speed return paths require careful PCB design. Production selection should include a complete review of the ordering-specific electrical and environmental limits.
Disebarkan
Synchronized Network Test Equipment
The VSC8574XKS-10 is appropriate for synchronized network test and measurement equipment that combines four physical Ethernet ports with precise time correlation. IEEE 1588 single-step and two-step timestamping can support traffic analysis, synchronization tests, and timestamped service verification across multiple links. QSGMII provides an efficient path for a four-lane test instrument, while SGMII can be used in narrower channel arrangements. The four-port configuration reduces instrument size by consolidating repetitive PHY functions and shared synchronization resources. Designers must still account for clock jitter, reference-clock architecture, deterministic reset behavior, and the need for low-noise supplies. The 256-ball package should be placed on a multilayer board with carefully controlled impedance and extensive ground-plane continuity, and every production configuration should be checked against the manufacturer ordering information.
Disebarkan
Secure Network Appliances
The VSC8574XKS-10 can serve as the Gigabit Ethernet interface tier in a secure gateway or network appliance with four external copper ports. The QSGMII connection permits a central security processor to manage all four lanes efficiently, while SGMII supports designs that isolate traffic paths. Consolidating four PHYs reduces component count and makes it easier to apply consistent cable diagnostics, synchronization, and link-status handling across the appliance. In security-focused systems, deterministic boot behavior, controlled reset sequencing, and isolation between interface and core supplies are important design objectives. The PBGA package also demands close attention to decoupling because simultaneous traffic across four ports can increase dynamic current demand. Validate EMC, thermal, and environmental requirements against the exact ordering code, and use the hardware design checklist as the basis for power filtering and layer-stack selection.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk VSC8574XKS-10 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | VSC8574XKS-02 | VSC8574XKS-05 | VSC8582XKS-10 |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 256-pin PBGA (17 mm x 17 mm) | 256-pin PBGA (17 mm x 17 mm) | 256-pin PBGA | 256-pin PBGA |
| Device Family | VSC8574 | VSC8574 | VSC8574 | VSC8582 |
| Ordering Configuration | XKS-10 | XKS-02 | XKS-05 | XKS-10 in a different device family |
Penyeberangsung Jelas
- Four Gigabit Ethernet PHYs in one device (vsVSC8582XKS-10)
- Synchronization and carrier-network features (vsVSC8574XKS-02)
- Consolidated quad-lane MAC connection (vsVSC8574XKS-05)
Catatan Desain
Use a multilayer PCB for the 256-pin PBGA and preserve continuous ground references beneath the device and high-speed routes. Follow the Microchip VSC8574 Hardware Design Checklist for bulk-decoupling placement and layer assignment. Place local capacitors directly beside their supply balls, minimize loop area, and route SGMII, QSGMII, clock, and copper interfaces over uninterrupted reference planes. Confirm every ball assignment against the exact ordering code because suffix changes can accompany configuration changes.
Plan the power tree around separate filtering paths for the PHY, clocks, MAC interfaces, and I/O supplies. The manufacturer checklist recommends the lowest practical resistive drop and correctly positioned local decoupling. Ferrite beads can be preferable to a series inductor when suitable because they provide filtering with less added series impedance. Validate transient response and cross-port current demand with the operating current and supply limits from the ordering-specific electrical-characteristics table.
Treat reference clocks, SGMII, QSGMII, and copper-port signals as controlled-impedance interfaces rather than general-purpose routing. Keep clock traces short, provide a continuous return path, and avoid unnecessary vias, stubs, and test pads. Use the manufacturer's recommended terminations and layer geometry for each interface. If optical or copper modules add long trace segments, model the combined channel and verify eye diagrams, jitter, and crosstalk before production release.
Because four Gigabit Ethernet PHYs and high-speed MAC interfaces operate in one PBGA, distribute power and heat across the board rather than relying on a small thermal area beneath the package. Use multiple power and ground balls as specified by the datasheet, add copper thermal vias where permitted, and provide uninterrupted top-layer copper for spreading heat. Final junction-temperature and airflow calculations require the exact worst-case power dissipation and thermal-resistance values for the selected ordering.
Maklumat Kesediaan
The exact ordering-specific environmental, material, and qualification declarations must be checked in the manufacturer product documentation or declarations before release.